CMake/Modules/CPackRPM.cmake

525 lines
22 KiB
CMake

# - The builtin (binary) CPack RPM generator (Unix only)
# CPackRPM may be used to create RPM package using CPack.
# CPackRPM is a CPack generator thus it uses the CPACK_XXX variables
# used by CPack : http://www.cmake.org/Wiki/CMake:CPackConfiguration
#
# However CPackRPM has specific features which are controlled by
# the specifics CPACK_RPM_XXX variables. You'll find a detailed usage on
# the wiki:
# http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29
# However as a handy reminder here comes the list of specific variables:
#
# CPACK_RPM_PACKAGE_SUMMARY
# Mandatory : YES
# Default : CPACK_PACKAGE_DESCRIPTION
# The RPM package summary
# CPACK_RPM_PACKAGE_NAME
# Mandatory : YES
# Default : CPACK_PACKAGE_NAME
# The RPM package name
# CPACK_RPM_PACKAGE_VERSION
# Mandatory : YES
# Default : CPACK_PACKAGE_VERSION
# The RPM package version
# CPACK_RPM_PACKAGE_ARCHITECTURE
# Mandatory : NO
# Default : -
# The RPM package architecture. This may be set to "noarch" if you
# know you are building a noarch package.
# CPACK_RPM_PACKAGE_RELEASE
# Mandatory : YES
# Default : 1
# The RPM package release. This is the numbering of the RPM package
# itself, i.e. the version of the packaging and not the version of the
# content (see CPACK_RPM_PACKAGE_VERSION). One may change the default
# value if the previous packaging was buggy and/or you want to put here
# a fancy Linux distro specific numbering.
# CPACK_RPM_PACKAGE_LICENSE
# Mandatory : YES
# Default : "unknown"
# The RPM package license policy.
# CPACK_RPM_PACKAGE_GROUP
# Mandatory : YES
# Default : "unknown"
# The RPM package group.
# CPACK_RPM_PACKAGE_VENDOR
# Mandatory : YES
# Default : CPACK_PACKAGE_VENDOR if set or "unknown"
# The RPM package group.
# CPACK_RPM_PACKAGE_DESCRIPTION
# Mandatory : YES
# Default : CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package description available"
# CPACK_RPM_PACKAGE_REQUIRES
# Mandatory : NO
# Default : -
# May be used to set RPM dependencies (requires).
# Note that you must enclose the complete requires string between quotes,
# for example:
# set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8")
# CPACK_RPM_PACKAGES_PROVIDES
# Mandatory : NO
# Default : -
# May be used to set RPM dependencies (provides).
# CPACK_RPM_SPEC_INSTALL_POST
# Mandatory : NO
# Default : -
# May be used to set an RPM post-install command inside the spec file.
# For example setting it to "/bin/true" may be used to prevent
# rpmbuild to strip binaries.
# CPACK_RPM_SPEC_MORE_DEFINE
# Mandatory : NO
# Default : -
# May be used to add any %define lines to the generated spec file.
# CPACK_RPM_PACKAGE_DEBUG
# Mandatory : NO
# Default : -
# May be set when invoking cpack in order to trace debug informations
# during CPack RPM run. For example you may launch CPack like this
# cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM
# CPACK_RPM_USER_BINARY_SPECFILE
# Mandatory : NO
# Default : -
# May be set by the user in order to specify a USER binary spec file
# to be used by CPackRPM instead of generating the file.
# The specified file will be processed by CONFIGURE_FILE( @ONLY).
# CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
# Mandatory : NO
# Default : -
# If set CPack will generate a template for USER specified binary
# spec file and stop with an error. For example launch CPack like this
# cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM
# The user may then use this file in order to hand-craft is own
# binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE.
# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
# Mandatory : NO
# Default : -
# May be used to embbed a pre (un)installation script in the spec file.
# The refered script file(s) will be read and directly
# put after the %pre or %preun section
# One may verify which scriptlet has been included with
# rpm -qp --scripts package.rpm
# CPACK_RPM_POST_INSTALL_SCRIPT_FILE
# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
# Mandatory : NO
# Default : -
# May be used to embbed a post (un)installation script in the spec file.
# The refered script file(s) will be read and directly
# put after the %post or %postun section
# One may verify which scriptlet has been included with
# rpm -qp --scripts package.rpm
#=============================================================================
# Copyright 2007-2009 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distributed this file outside of CMake, substitute the full
# License text for the above reference.)
# Author: Eric Noulard with the help of Alexander Neundorf.
IF(CMAKE_BINARY_DIR)
MESSAGE(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.")
ENDIF(CMAKE_BINARY_DIR)
IF(NOT UNIX)
MESSAGE(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.")
ENDIF(NOT UNIX)
# rpmbuild is the basic command for building RPM package
# it may be a simple (symbolic) link to rpmb command.
FIND_PROGRAM(RPMBUILD_EXECUTABLE rpmbuild)
# Check version of the rpmbuild tool this would be easier to
# track bugs with users and CPackRPM debug mode.
# We may use RPM version in order to check for available version dependent features
IF(RPMBUILD_EXECUTABLE)
execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version
OUTPUT_VARIABLE _TMP_VERSION
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
string(REGEX REPLACE "^.*\ " ""
RPMBUILD_EXECUTABLE_VERSION
${_TMP_VERSION})
IF(CPACK_RPM_PACKAGE_DEBUG)
MESSAGE("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)
ENDIF(RPMBUILD_EXECUTABLE)
IF(NOT RPMBUILD_EXECUTABLE)
MESSAGE(FATAL_ERROR "RPM package requires rpmbuild executable")
ENDIF(NOT RPMBUILD_EXECUTABLE)
# We may use RPM version in the future in order
# to shut down warning about space in buildtree
# some recent RPM version should support space in different places.
# not checked [yet].
IF(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*")
MESSAGE(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.")
ENDIF(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*")
# If rpmbuild is found
# we try to discover alien since we may be on non RPM distro like Debian.
# In this case we may try to to use more advanced features
# like generating RPM directly from DEB using alien.
# FIXME feature not finished (yet)
FIND_PROGRAM(ALIEN_EXECUTABLE alien)
IF(ALIEN_EXECUTABLE)
MESSAGE(STATUS "alien found, we may be on a Debian based distro.")
ENDIF(ALIEN_EXECUTABLE)
#
# Use user-defined RPM specific variables value
# or generate reasonable default value from
# CPACK_xxx generic values.
# The variables comes from the needed (mandatory or not)
# values found in the RPM specification file aka ".spec" file.
# The variables which may/should be defined are:
#
# CPACK_RPM_PACKAGE_SUMMARY (mandatory)
IF(NOT CPACK_RPM_PACKAGE_SUMMARY)
# if neither var is defined lets use the name as summary
IF(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
STRING(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY)
ELSE(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
SET(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
ENDIF(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
ENDIF(NOT CPACK_RPM_PACKAGE_SUMMARY)
# CPACK_RPM_PACKAGE_NAME (mandatory)
IF(NOT CPACK_RPM_PACKAGE_NAME)
STRING(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME)
ENDIF(NOT CPACK_RPM_PACKAGE_NAME)
# CPACK_RPM_PACKAGE_VERSION (mandatory)
IF(NOT CPACK_RPM_PACKAGE_VERSION)
IF(NOT CPACK_PACKAGE_VERSION)
MESSAGE(FATAL_ERROR "RPM package requires a package version")
ENDIF(NOT CPACK_PACKAGE_VERSION)
SET(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION})
ENDIF(NOT CPACK_RPM_PACKAGE_VERSION)
# CPACK_RPM_PACKAGE_ARCHITECTURE (optional)
IF(CPACK_RPM_PACKAGE_ARCHITECTURE)
SET(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
IF(CPACK_RPM_PACKAGE_DEBUG)
MESSAGE("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)
ELSE(CPACK_RPM_PACKAGE_ARCHITECTURE)
SET(TMP_RPM_BUILDARCH "")
ENDIF(CPACK_RPM_PACKAGE_ARCHITECTURE)
# CPACK_RPM_PACKAGE_RELEASE
# The RPM release is the numbering of the RPM package ITSELF
# this is the version of the PACKAGING and NOT the version
# of the CONTENT of the package.
# You may well need to generate a new RPM package release
# without changing the version of the packaged software.
# This is the case when the packaging is buggy (not) the software :=)
# If not set, 1 is a good candidate
IF(NOT CPACK_RPM_PACKAGE_RELEASE)
SET(CPACK_RPM_PACKAGE_RELEASE 1)
ENDIF(NOT CPACK_RPM_PACKAGE_RELEASE)
# CPACK_RPM_PACKAGE_LICENSE
IF(NOT CPACK_RPM_PACKAGE_LICENSE)
SET(CPACK_RPM_PACKAGE_LICENSE "unknown")
ENDIF(NOT CPACK_RPM_PACKAGE_LICENSE)
# CPACK_RPM_PACKAGE_GROUP
IF(NOT CPACK_RPM_PACKAGE_GROUP)
SET(CPACK_RPM_PACKAGE_GROUP "unknown")
ENDIF(NOT CPACK_RPM_PACKAGE_GROUP)
# CPACK_RPM_PACKAGE_VENDOR
IF(NOT CPACK_RPM_PACKAGE_VENDOR)
IF(CPACK_PACKAGE_VENDOR)
SET(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}")
ELSE(CPACK_PACKAGE_VENDOR)
SET(CPACK_RPM_PACKAGE_VENDOR "unknown")
ENDIF(CPACK_PACKAGE_VENDOR)
ENDIF(NOT CPACK_RPM_PACKAGE_VENDOR)
# CPACK_RPM_PACKAGE_SOURCE
# The name of the source tarball in case we generate a source RPM
# CPACK_RPM_PACKAGE_DESCRIPTION
# The variable content may be either
# - explicitely given by tthe user or
# - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE
# if it is defined
# - set to a default value
#
IF (NOT CPACK_RPM_PACKAGE_DESCRIPTION)
IF (CPACK_PACKAGE_DESCRIPTION_FILE)
FILE(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION)
ELSE (CPACK_PACKAGE_DESCRIPTION_FILE)
SET(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available")
ENDIF (CPACK_PACKAGE_DESCRIPTION_FILE)
ENDIF (NOT CPACK_RPM_PACKAGE_DESCRIPTION)
# CPACK_RPM_PACKAGE_REQUIRES
# Placeholder used to specify binary RPM dependencies (if any)
# see http://www.rpm.org/max-rpm/s1-rpm-depend-manual-dependencies.html
IF(CPACK_RPM_PACKAGE_REQUIRES)
IF(CPACK_RPM_PACKAGE_DEBUG)
MESSAGE("CPackRPM:Debug: User defined Requires:\n ${CPACK_RPM_PACKAGE_REQUIRES}")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)
SET(TMP_RPM_REQUIRES "Requires: ${CPACK_RPM_PACKAGE_REQUIRES}")
ENDIF(CPACK_RPM_PACKAGE_REQUIRES)
# CPACK_RPM_PACKAGE_PROVIDES
# Placeholder used to specify binary RPM dependencies (if any)
# see http://www.rpm.org/max-rpm/s1-rpm-depend-manual-dependencies.html
IF(CPACK_RPM_PACKAGE_PROVIDES)
IF(CPACK_RPM_PACKAGE_DEBUG)
MESSAGE("CPackRPM:Debug: User defined Provides:\n ${CPACK_RPM_PACKAGE_PROVIDES}")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)
SET(TMP_RPM_PROVIDES "Provides: ${CPACK_RPM_PACKAGE_PROVIDES}")
ENDIF(CPACK_RPM_PACKAGE_PROVIDES)
# CPACK_RPM_SPEC_INSTALL_POST
# May be used to define a RPM post intallation script
# for example setting it to "/bin/true" may prevent
# rpmbuild from stripping binaries.
IF(CPACK_RPM_SPEC_INSTALL_POST)
IF(CPACK_RPM_PACKAGE_DEBUG)
MESSAGE("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)
SET(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}")
ENDIF(CPACK_RPM_SPEC_INSTALL_POST)
# CPACK_RPM_POST_INSTALL_SCRIPT_FILE
# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
# May be used to embbed a post (un)installation script in the spec file.
# The refered script file(s) will be read and directly
# put after the %post or %postun section
if(CPACK_RPM_POST_INSTALL_SCRIPT_FILE)
if(EXISTS ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE})
file(READ ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE} CPACK_RPM_SPEC_POSTINSTALL)
else(EXISTS ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE})
message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}> does not exists - ignoring")
endif(EXISTS ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE})
endif(CPACK_RPM_POST_INSTALL_SCRIPT_FILE)
if(CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE)
if(EXISTS ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE})
file(READ ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE} CPACK_RPM_SPEC_POSTUNINSTALL)
else(EXISTS ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE})
message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}> does not exists - ignoring")
endif(EXISTS ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE})
endif(CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE)
# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
# May be used to embbed a pre (un)installation script in the spec file.
# The refered script file(s) will be read and directly
# put after the %pre or %preun section
if(CPACK_RPM_PRE_INSTALL_SCRIPT_FILE)
if(EXISTS ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE})
file(READ ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE} CPACK_RPM_SPEC_PREINSTALL)
else(EXISTS ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE})
message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}> does not exists - ignoring")
endif(EXISTS ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE})
endif(CPACK_RPM_PRE_INSTALL_SCRIPT_FILE)
if(CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE)
if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE})
file(READ ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE} CPACK_RPM_SPEC_PREUNINSTALL)
else(EXISTS ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE})
message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}> does not exists - ignoring")
endif(EXISTS ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE})
endif(CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE)
# CPACK_RPM_SPEC_MORE_DEFINE
# This is a generated spec rpm file spaceholder
IF(CPACK_RPM_SPEC_MORE_DEFINE)
IF(CPACK_RPM_PACKAGE_DEBUG)
MESSAGE("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)
ENDIF(CPACK_RPM_SPEC_MORE_DEFINE)
# Now we may create the RPM build tree structure
SET(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}")
MESSAGE(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}")
# Prepare RPM build tree
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR})
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS)
#SET(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm")
SET(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}")
# it seems rpmbuild can't handle spaces in the path
# neither escaping (as below) nor putting quotes around the path seem to help
#STRING(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
SET(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
# Use files tree to construct files command (spec file)
# We should not forget to include symlinks (thus -o -type l)
# We must remove the './' due to the local search (thus the sed)
# Then we must authorize any man pages extension (adding * at the end)
# because rpmbuild may automatically compress those files
EXECUTE_PROCESS(COMMAND find -type f -o -type l
COMMAND sed {s/\\.//}
COMMAND sed {s/.*man.*\\/.*/&*/}
WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES)
# The name of the final spec file to be used by rpmbuild
SET(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}.spec")
# Print out some debug information if we were asked for that
IF(CPACK_RPM_PACKAGE_DEBUG)
MESSAGE("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}")
MESSAGE("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}")
MESSAGE("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}")
MESSAGE("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}")
MESSAGE("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}")
MESSAGE("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}")
MESSAGE("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}")
MESSAGE("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}")
MESSAGE("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)
# USER generated spec file handling.
# We should generate a spec file template:
# - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
# - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE
#
IF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE)
FILE(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in
"# -*- rpm-spec -*-
Buildroot: \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@
Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@
Name: \@CPACK_RPM_PACKAGE_NAME\@
Version: \@CPACK_RPM_PACKAGE_VERSION\@
Release: \@CPACK_RPM_PACKAGE_RELEASE\@
License: \@CPACK_RPM_PACKAGE_LICENSE\@
Group: \@CPACK_RPM_PACKAGE_GROUP\@
Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@
\@TMP_RPM_REQUIRES\@
\@TMP_RPM_PROVIDES\@
\@TMP_RPM_BUILDARCH\@
#p define prefix \@CMAKE_INSTALL_PREFIX\@
%define _rpmdir \@CPACK_RPM_DIRECTORY\@
%define _rpmfilename \@CPACK_RPM_FILE_NAME\@
%define _unpackaged_files_terminate_build 0
%define _topdir \@CPACK_RPM_DIRECTORY\@
\@TMP_RPM_SPEC_INSTALL_POST\@
\@CPACK_RPM_SPEC_MORE_DEFINE\@
%description
\@CPACK_RPM_PACKAGE_DESCRIPTION\@
# This is a shortcutted spec file generated by CMake RPM generator
# we skip _install step because CPack does that for us.
# We do only save CPack installed tree in _prepr
# and then restore it in build.
%prep
mv $RPM_BUILD_ROOT \@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot
#p build
%install
if [ -e $RPM_BUILD_ROOT ];
then
mv \@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot/* $RPM_BUILD_ROOT
else
mv \@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot $RPM_BUILD_ROOT
fi
%clean
%post
\@CPACK_RPM_SPEC_POSTINSTALL\@
%postun
\@CPACK_RPM_SPEC_POSTUNINSTALL\@
%pre
\@CPACK_RPM_SPEC_PREINSTALL\@
%preun
\@CPACK_RPM_SPEC_PREUNINSTALL\@
%files
%defattr(-,root,root,-)
${CPACK_RPM_INSTALL_FILES}
%changelog
* Sat Nov 28 2009 Erk <eric.noulard@gmail.com>
Refix backup/restore install tree for OpenSuSE 11.2
* Sun Nov 22 2009 Erk <eric.noulard@gmail.com>
Include symlinks in the file list.
* Sat Nov 14 2009 Erk <eric.noulard@gmail.com>
Replace prep and build step with backup and restore
of the previously CPack installed tree. This should
mimic what is expected in rpmbuild usual steps
* Wed Nov 11 2009 Erk <eric.noulard@gmail.com>
Add support for USER defined pre/post[un]install scripts
* Wed Oct 07 2009 Erk <eric.noulard@gmail.com>
Add user custom spec file support
* Sat Oct 03 2009 Kami <cmoidavid@gmail.com>
Update to handle more precisely the files section
* Mon Oct 03 2008 Erk <eric.noulard@gmail.com>
Update generator to handle optional dependencies using Requires
Update DEBUG output typos.
* Mon Aug 25 2008 Erk <eric.noulard@gmail.com>
Update generator to handle optional post-install
* Tue Aug 16 2007 Erk <eric.noulard@gmail.com>
Generated by CPack RPM Generator and associated macros
")
# Stop here if we were asked to only generate a template USER spec file
# The generated file may then be used as a template by user who wants
# to customize their own spec file.
IF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE)
MESSAGE(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in")
ENDIF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE)
ENDIF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE)
# After that we may either use a user provided spec file
# or generate one using appropriate variables value.
IF(CPACK_RPM_USER_BINARY_SPECFILE)
# User may have specified SPECFILE just use it
MESSAGE("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}")
# The user provided file is processed for @var replacement
CONFIGURE_FILE(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
ELSE(CPACK_RPM_USER_BINARY_SPECFILE)
# No User specified spec file, will use the generated spec file
MESSAGE("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}")
# Note the just created file is processed for @var replacement
CONFIGURE_FILE(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
ENDIF(CPACK_RPM_USER_BINARY_SPECFILE)
IF(RPMBUILD_EXECUTABLE)
# Now call rpmbuild using the SPECFILE
EXECUTE_PROCESS(
COMMAND "${RPMBUILD_EXECUTABLE}" -bb
--buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
"${CPACK_RPM_BINARY_SPECFILE}"
WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.err"
OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.out")
IF(CPACK_RPM_PACKAGE_DEBUG)
MESSAGE("CPackRPM:Debug: You may consult rpmbuild logs in: ")
MESSAGE("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.err")
MESSAGE("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.out")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)
ELSE(RPMBUILD_EXECUTABLE)
IF(ALIEN_EXECUTABLE)
MESSAGE(FATAL_ERROR "RPM packaging through alien not done (yet)")
ENDIF(ALIEN_EXECUTABLE)
ENDIF(RPMBUILD_EXECUTABLE)