CMake/Modules/FindSDL_sound.cmake

606 lines
27 KiB
CMake

# - Locates the SDL_sound library
# This module depends on SDL being found and
# must be called AFTER FindSDL.cmake is called.
#
# This module defines
# SDL_SOUND_INCLUDE_DIR, where to find SDL_sound.h
# SDL_SOUND_FOUND, if false, do not try to link to SDL
# SDL_SOUND_LIBRARIES, this contains the list of libraries that you need
# to link against. This is a read-only variable and is marked INTERNAL.
# SDL_SOUND_EXTRAS, this is an optional variable for you to add your own
# flags to SDL_SOUND_LIBRARIES. This is prepended to SDL_SOUND_LIBRARIES.
# This is available mostly for cases this module failed to anticipate for
# and you must add additional flags. This is marked as ADVANCED.
#
# This module also defines (but you shouldn't need to use directly)
# SDL_SOUND_LIBRARY, the name of just the SDL_sound library you would link
# against. Use SDL_SOUND_LIBRARIES for you link instructions and not this one.
# And might define the following as needed
# MIKMOD_LIBRARY
# MODPLUG_LIBRARY
# OGG_LIBRARY
# VORBIS_LIBRARY
# SMPEG_LIBRARY
# FLAC_LIBRARY
# SPEEX_LIBRARY
#
# Typically, you should not use these variables directly, and you should use
# SDL_SOUND_LIBRARIES which contains SDL_SOUND_LIBRARY and the other audio
# libraries (if needed) to successfully compile on your system .
#
# Created by Eric Wing.
#
# This module is a bit more complicated than the other FindSDL* family
# modules. The reason is that SDL_sound can be compiled in a large variety
# of different ways which are independent of platform. SDL_sound may
# dynamically link against other 3rd party libraries to get additional codec
# support, such as Ogg Vorbis, SMPEG, ModPlug, MikMod, FLAC, Speex, and
# potentially others. Under some circumstances which I don't fully
# understand, there seems to be a requirement that dependent libraries of
# libraries you use must also be explicitly linked against in order to
# successfully compile. SDL_sound does not currently have any system in place
# to know how it was compiled. So this CMake module does the hard work in
# trying to discover which 3rd party libraries are required for building (if
# any).
#
# This module uses a brute force approach to create a test program that uses
# SDL_sound, and then tries to build it. If the build fails, it parses the
# error output for known symbol names to figure out which libraries are
# needed. Responds to the $SDLDIR and $SDLSOUNDDIR environmental variable
# that would correspond to the ./configure --prefix=$SDLDIR used in building
# SDL.
#
# On OSX, this will prefer the Framework version (if found) over others.
# People will have to manually change the cache values of
# SDL_LIBRARY to override this selection.
#
SET(SDL_SOUND_EXTRAS "" CACHE STRING "SDL_sound extra flags")
MARK_AS_ADVANCED(SDL_SOUND_EXTRAS)
# Find SDL_sound.h
FIND_PATH(SDL_SOUND_INCLUDE_DIR SDL_sound.h
$ENV{SDLSOUNDDIR}/include
$ENV{SDLDIR}/include
~/Library/Frameworks/SDL_sound.framework/Headers
/Library/Frameworks/SDL_sound.framework/Headers # OS X
/usr/local/include/SDL
/usr/include/SDL
/usr/local/include/SDL12
/usr/local/include/SDL11 # FreeBSD ports
/usr/include/SDL12
/usr/include/SDL11
/usr/local/include
/usr/include
/sw/include/SDL # Fink
/sw/include
/opt/local/include/SDL # DarwinPorts
/opt/local/include
/opt/csw/include/SDL # Blastwave
/opt/csw/include
/opt/include/SDL
/opt/include
)
# Find the SDL_sound library
IF(${SDL_SOUND_INCLUDE_DIR} MATCHES ".framework")
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" SDL_SOUND_FRAMEWORK_PATH_TMP ${SDL_SOUND_INCLUDE_DIR})
IF("${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# String is in default search path, don't need to use -F
SET (SDL_SOUND_LIBRARY "-framework SDL_sound" CACHE STRING "SDL_sound framework for OSX")
ELSE("${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# String is not /Library/Frameworks, need to use -F
SET(SDL_SOUND_LIBRARY "-F${SDL_SOUND_FRAMEWORK_PATH_TMP} -framework SDL_sound" CACHE STRING "SDL_sound framework for OSX")
ENDIF("${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(SDL_SOUND_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(${SDL_SOUND_INCLUDE_DIR} MATCHES ".framework")
FIND_LIBRARY(SDL_SOUND_LIBRARY
NAMES SDL_sound
PATHS
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(${SDL_SOUND_INCLUDE_DIR} MATCHES ".framework")
SET(SDL_SOUND_FOUND "NO")
IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY)
# CMake is giving me problems using TRY_COMPILE with the CMAKE_FLAGS
# for the :STRING syntax if I have multiple values contained in a
# single variable. This is a problem for the SDL_LIBRARY variable
# because it does just that. When I feed this variable to the command,
# only the first value gets the appropriate modifier (e.g. -I) and
# the rest get dropped.
# To get multiple single variables to work, I must separate them with a "\;"
# I could go back and modify the FindSDL.cmake module, but that's kind of painful.
# The solution would be to try something like:
# SET(SDL_TRY_COMPILE_LIBRARY_LIST "${SDL_TRY_COMPILE_LIBRARY_LIST}\;${CMAKE_THREAD_LIBS_INIT}")
# Instead, it was suggested on the mailing list to write a temporary CMakeLists.txt
# with a temporary test project and invoke that with TRY_COMPILE.
# See message thread "Figuring out dependencies for a library in order to build"
# 2005-07-16
# TRY_COMPILE(
# MY_RESULT
# ${CMAKE_BINARY_DIR}
# ${PROJECT_SOURCE_DIR}/DetermineSoundLibs.c
# CMAKE_FLAGS
# -DINCLUDE_DIRECTORIES:STRING=${SDL_INCLUDE_DIR}\;${SDL_SOUND_INCLUDE_DIR}
# -DLINK_LIBRARIES:STRING=${SDL_SOUND_LIBRARY}\;${SDL_LIBRARY}
# OUTPUT_VARIABLE MY_OUTPUT
# )
# To minimize external dependencies, create a sdlsound test program
# which will be used to figure out if additional link dependencies are
# required for the link phase.
FILE(WRITE ${PROJECT_BINARY_DIR}/CMakeTmp/DetermineSoundLibs.c
"#include \"SDL_sound.h\"
#include \"SDL.h\"
int main(int argc, char* argv[])
{
Sound_AudioInfo desired;
Sound_Sample* sample;
SDL_Init(0);
Sound_Init();
/* This doesn't actually have to work, but Init() is a no-op
* for some of the decoders, so this should force more symbols
* to be pulled in.
*/
sample = Sound_NewSampleFromFile(argv[1], &desired, 4096);
Sound_Quit();
SDL_Quit();
return 0;
}"
)
# Write the CMakeLists.txt and test project
# Weird, this is still sketchy. If I don't quote the variables
# in the TARGET_LINK_LIBRARIES, I seem to loose everything
# in the SDL_LIBRARY string after the "-framework".
# But if I quote the stuff in INCLUDE_DIRECTORIES, it doesn't work.
FILE(WRITE ${PROJECT_BINARY_DIR}/CMakeTmp/CMakeLists.txt
"PROJECT(DetermineSoundLibs)
INCLUDE_DIRECTORIES(${SDL_INCLUDE_DIR} ${SDL_SOUND_INCLUDE_DIR})
ADD_EXECUTABLE(DetermineSoundLibs DetermineSoundLibs.c)
TARGET_LINK_LIBRARIES(DetermineSoundLibs \"${SDL_SOUND_LIBRARY} ${SDL_LIBRARY}\")"
)
TRY_COMPILE(
MY_RESULT
${PROJECT_BINARY_DIR}/CMakeTmp
${PROJECT_BINARY_DIR}/CMakeTmp
DetermineSoundLibs
OUTPUT_VARIABLE MY_OUTPUT
)
#MESSAGE("${MY_RESULT}")
#MESSAGE(${MY_OUTPUT})
IF(NOT MY_RESULT)
# I expect that MPGLIB, VOC, WAV, AIFF, and SHN are compiled in statically.
# I think Timidity is also compiled in statically.
# I've never had to explcitly link against Quicktime, so I'll skip that for now.
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARY})
# Find MikMod
IF("${MY_OUTPUT}" MATCHES "MikMod_")
FIND_FILE(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK
libmikmod-coreaudio
~/Library/Frameworks/libmikmod-coreaudio.framework
/Library/Frameworks/libmikmod-coreaudio.framework
)
IF(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK)
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK})
IF("${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's in the default search path so I don't need to use -F
SET(MIKMOD_LIBRARY "-framework libmikmod-coreaudio" CACHE STRING "MikMod framework for OSX")
ELSE("${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's not in the default search path so I need to use -F
SET(MIKMOD_LIBRARY "-F${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP} -framework libmikmod-coreaudio" CACHE STRING "MikMod framework for OSX")
ENDIF("${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK)
FIND_LIBRARY(MIKMOD_LIBRARY
NAMES mikmod
PATHS
$ENV{MIKMODDIR}/lib
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK "" CACHE INTERNAL "")
IF(MIKMOD_LIBRARY)
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${MIKMOD_LIBRARY})
ENDIF(MIKMOD_LIBRARY)
ENDIF("${MY_OUTPUT}" MATCHES "MikMod_")
# Find ModPlug
IF("${MY_OUTPUT}" MATCHES "MODPLUG_")
FIND_FILE(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK
modplug
~/Library/Frameworks/modplug.framework
/Library/Frameworks/modplug.framework
)
IF(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK)
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK})
MESSAGE("HELLO")
IF("${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's in the default search path so I don't need to use -F
SET(MODPLUG_LIBRARY "-framework modplug" CACHE STRING "MODPLUG framework for OSX")
ELSE("${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's not in the default search path so I need to use -F
SET(MODPLUG_LIBRARY "-F${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP} -framework modplug" CACHE STRING "MODPLUG framework for OSX")
ENDIF("${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK)
FIND_LIBRARY(MODPLUG_LIBRARY
NAMES modplug
PATHS
$ENV{MODPLUGDIR}/lib
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK "" CACHE INTERNAL "")
IF(MODPLUG_LIBRARY)
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${MODPLUG_LIBRARY})
ENDIF(MODPLUG_LIBRARY)
ENDIF("${MY_OUTPUT}" MATCHES "MODPLUG_")
# Find Ogg and Vorbis
IF("${MY_OUTPUT}" MATCHES "ov_")
FIND_FILE(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK
Vorbis
~/Library/Frameworks/Vorbis.framework
/Library/Frameworks/Vorbis.framework
)
IF(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK)
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK})
IF("${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's in the default search path so I don't need to use -F
SET(VORBIS_LIBRARY "-framework Vorbis" CACHE STRING "Vorbis framework for OSX")
ELSE("${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's not in the default search path so I need to use -F
SET(VORBIS_LIBRARY "-F${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP} -framework Vorbis" CACHE STRING "Vorbis framework for OSX")
ENDIF("${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK)
FIND_LIBRARY(VORBIS_LIBRARY
NAMES vorbis Vorbis VORBIS
PATHS
$ENV{VORBISDIR}/lib
$ENV{OGGDIR}/lib
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK "" CACHE INTERNAL "")
IF(VORBIS_LIBRARY)
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${VORBIS_LIBRARY})
ENDIF(VORBIS_LIBRARY)
FIND_FILE(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK
Ogg
~/Library/Frameworks/Ogg.framework
/Library/Frameworks/Ogg.framework
)
IF(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_OGG_FRAMEWORK})
IF("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's in the default search path so I don't need to use -F
SET(OGG_LIBRARY "-framework Ogg" CACHE STRING "Ogg framework for OSX")
ELSE("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's not in the default search path so I need to use -F
SET(OGG_LIBRARY "-F${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP} -framework Ogg" CACHE STRING "Ogg framework for OSX")
ENDIF("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
FIND_LIBRARY(OGG_LIBRARY
NAMES ogg Ogg OGG
PATHS
$ENV{OGGDIR}/lib
$ENV{VORBISDIR}/lib
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK "" CACHE INTERNAL "")
IF(OGG_LIBRARY)
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${OGG_LIBRARY})
ENDIF(OGG_LIBRARY)
ENDIF("${MY_OUTPUT}" MATCHES "ov_")
# Find SMPEG
IF("${MY_OUTPUT}" MATCHES "SMPEG_")
FIND_FILE(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK
SMPEG
~/Library/Frameworks/smpeg.framework
/Library/Frameworks/smpeg.framework
)
IF(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK)
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK})
IF("${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's in the default search path so I don't need to use -F
SET(SMPEG_LIBRARY "-framework smpeg" CACHE STRING "SMPEG framework for OSX")
ELSE("${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's not in the default search path so I need to use -F
SET(SMPEG_LIBRARY "-F${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP} -framework smpeg" CACHE STRING "SMPEG framework for OSX")
ENDIF("${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK)
FIND_LIBRARY(SMPEG_LIBRARY
NAMES smpeg SMPEG Smpeg SMpeg
PATHS
$ENV{SMPEGDIR}/lib
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK "" CACHE INTERNAL "")
IF(SMPEG_LIBRARY)
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${SMPEG_LIBRARY})
ENDIF(SMPEG_LIBRARY)
ENDIF("${MY_OUTPUT}" MATCHES "SMPEG_")
# Find FLAC
IF("${MY_OUTPUT}" MATCHES "FLAC_")
FIND_FILE(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK
FLAC
~/Library/Frameworks/FLAC.framework
/Library/Frameworks/FLAC.framework
)
IF(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK)
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK})
IF("${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's in the default search path so I don't need to use -F
SET(FLAC_LIBRARY "-framework FLAC" CACHE STRING "FLAC framework for OSX")
ELSE("${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's not in the default search path so I need to use -F
SET(FLAC_LIBRARY "-F${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP} -framework FLAC" CACHE STRING "FLAC framework for OSX")
ENDIF("${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK)
FIND_LIBRARY(FLAC_LIBRARY
NAMES flac FLAC
PATHS
$ENV{FLACDIR}/lib
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK "" CACHE INTERNAL "")
IF(FLAC_LIBRARY)
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${FLAC_LIBRARY})
ENDIF(FLAC_LIBRARY)
ENDIF("${MY_OUTPUT}" MATCHES "FLAC_")
# Hmmm...Speex seems to depend on Ogg. This might be a problem if
# the TRY_COMPILE attempt gets blocked at SPEEX before it can pull
# in the Ogg symbols. I'm not sure if I should duplicate the ogg stuff
# above for here or if two ogg entries will screw up things.
IF("${MY_OUTPUT}" MATCHES "speex_")
FIND_FILE(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK
speex
~/Library/Frameworks/speex.framework
/Library/Frameworks/speex.framework
)
IF(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK)
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK})
IF("${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's in the default search path so I don't need to use -F
SET(SPEEX_LIBRARY "-framework speex" CACHE STRING "SPEEX framework for OSX")
ELSE("${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's not in the default search path so I need to use -F
SET(SPEEX_LIBRARY "-F${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP} -framework speex" CACHE STRING "SPEEX framework for OSX")
ENDIF("${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK)
FIND_LIBRARY(SPEEX_LIBRARY
NAMES speex SPEEX
PATHS
$ENV{SPEEXDIR}/lib
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK "" CACHE INTERNAL "")
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${SPEEX_LIBRARY})
# Find OGG (needed for Speex)
FIND_FILE(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK
Ogg
~/Library/Frameworks/Ogg.framework
/Library/Frameworks/Ogg.framework
)
IF(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
# Extract the path the framework resides in so we can use it for the -F flag
STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_OGG_FRAMEWORK})
IF("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's in the default search path so I don't need to use -F
SET(OGG_LIBRARY "-framework Ogg" CACHE STRING "Ogg framework for OSX")
ELSE("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# It's not in the default search path so I need to use -F
SET(OGG_LIBRARY "-F${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP} -framework Ogg" CACHE STRING "Ogg framework for OSX")
ENDIF("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
ELSE(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
FIND_LIBRARY(OGG_LIBRARY
NAMES ogg Ogg OGG
PATHS
$ENV{OGGDIR}/lib
$ENV{VORBISDIR}/lib
$ENV{SPEEXDIR}/lib
$ENV{SDLSOUNDDIR}/lib
$ENV{SDLDIR}/lib
/usr/local/lib
/usr/lib
/sw/lib
/opt/local/lib
/opt/csw/lib
/opt/lib
)
ENDIF(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
# Clear the temp variable so nobody can see it
SET(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK "" CACHE INTERNAL "")
IF(OGG_LIBRARY)
SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${OGG_LIBRARY})
ENDIF(OGG_LIBRARY)
ENDIF("${MY_OUTPUT}" MATCHES "speex_")
ELSE(NOT MY_RESULT)
SET(SDL_SOUND_LIBRARIES "${SDL_SOUND_EXTRAS} ${SDL_SOUND_LIBRARY}" CACHE INTERNAL "SDL_sound and dependent libraries")
ENDIF(NOT MY_RESULT)
SET(SDL_SOUND_LIBRARIES "${SDL_SOUND_EXTRAS} ${SDL_SOUND_LIBRARIES_TMP}" CACHE INTERNAL "SDL_sound and dependent libraries")
SET(SDL_SOUND_FOUND "YES")
ENDIF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY)
# MESSAGE("SDL_SOUND_LIBRARIES is ${SDL_SOUND_LIBRARIES}")