CMake/Modules/CPackComponent.cmake

514 lines
21 KiB
CMake

##section Variables concerning CPack Components
##end
##module
# - Build binary and source package installers
#
# The CPackComponent module is the module which handles
# the component part of CPack. See CPack module for
# general information about CPack.
#
# For certain kinds of binary installers (including the graphical
# installers on Mac OS X and Windows), CPack generates installers that
# allow users to select individual application components to
# install. The contents of each of the components are identified by
# the COMPONENT argument of CMake's INSTALL command. These components
# can be annotated with user-friendly names and descriptions,
# inter-component dependencies, etc., and grouped in various ways to
# customize the resulting installer. See the cpack_add_* commands,
# described below, for more information about component-specific
# installations.
#
# Component-specific installation allows users to select specific sets
# of components to install during the install process. Installation
# components are identified by the COMPONENT argument of CMake's
# INSTALL commands, and should be further described by the following
# CPack commands:
##end
#
##variable
# CPACK_COMPONENTS_ALL - The list of component to install.
#
# The default value of this variable is computed by CPack
# and contains all components defined by the project. The
# user may set it to only include the specified components.
##end
#
##variable
# CPACK_<GENNAME>_COMPONENT_INSTALL - Enable/Disable component install for
# CPack generator <GENNAME>.
#
# Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy
# default behavior. e.g. RPM builds monolithic whereas NSIS builds component.
# One can change the default behavior by setting this variable to 0/1 or OFF/ON.
##end
##variable
# CPACK_COMPONENTS_GROUPING - Specify how components are grouped for multi-package
# component-aware CPack generators.
#
# Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates several
# packages files when asked for component packaging. They group the component
# differently depending on the value of this variable:
# - ONE_PER_GROUP (default): creates one package file per component group
# - ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) component
# - IGNORE : creates one package per component, i.e. IGNORE component group
# One can specify different grouping for different CPack generator by using
# a CPACK_PROJECT_CONFIG_FILE.
##end
##variable
# CPACK_COMPONENT_<compName>_DISPLAY_NAME - The name to be displayed for a component.
##end
##variable
# CPACK_COMPONENT_<compName>_DESCRIPTION - The description of a component.
##end
##variable
# CPACK_COMPONENT_<compName>_GROUP - The group of a component.
##end
##variable
# CPACK_COMPONENT_<compName>_DEPENDS - The dependencies (list of components)
# on which this component depends.
##end
##variable
# CPACK_COMPONENT_<compName>_REQUIRED - True is this component is required.
##end
##macro
# cpack_add_component - Describes a CPack installation component
# named by the COMPONENT argument to a CMake INSTALL command.
#
# cpack_add_component(compname
# [DISPLAY_NAME name]
# [DESCRIPTION description]
# [HIDDEN | REQUIRED | DISABLED ]
# [GROUP group]
# [DEPENDS comp1 comp2 ... ]
# [INSTALL_TYPES type1 type2 ... ]
# [DOWNLOADED]
# [ARCHIVE_FILE filename])
#
# The cmake_add_component command describes an installation
# component, which the user can opt to install or remove as part of
# the graphical installation process. compname is the name of the
# component, as provided to the COMPONENT argument of one or more
# CMake INSTALL commands.
#
# DISPLAY_NAME is the displayed name of the component, used in
# graphical installers to display the component name. This value can
# be any string.
#
# DESCRIPTION is an extended description of the component, used in
# graphical installers to give the user additional information about
# the component. Descriptions can span multiple lines using "\n" as
# the line separator. Typically, these descriptions should be no
# more than a few lines long.
#
# HIDDEN indicates that this component will be hidden in the
# graphical installer, so that the user cannot directly change
# whether it is installed or not.
#
# REQUIRED indicates that this component is required, and therefore
# will always be installed. It will be visible in the graphical
# installer, but it cannot be unselected. (Typically, required
# components are shown greyed out).
#
# DISABLED indicates that this component should be disabled
# (unselected) by default. The user is free to select this component
# for installation, unless it is also HIDDEN.
#
# DEPENDS lists the components on which this component depends. If
# this component is selected, then each of the components listed
# must also be selected. The dependency information is encoded
# within the installer itself, so that users cannot install
# inconsitent sets of components.
#
# GROUP names the component group of which this component is a
# part. If not provided, the component will be a standalone
# component, not part of any component group. Component groups are
# described with the cpack_add_component_group command, detailed
# below.
#
# INSTALL_TYPES lists the installation types of which this component
# is a part. When one of these installations types is selected, this
# component will automatically be selected. Installation types are
# described with the cpack_add_install_type command, detailed below.
#
# DOWNLOADED indicates that this component should be downloaded
# on-the-fly by the installer, rather than packaged in with the
# installer itself. For more information, see the cpack_configure_downloads
# command.
#
# ARCHIVE_FILE provides a name for the archive file created by CPack
# to be used for downloaded components. If not supplied, CPack will
# create a file with some name based on CPACK_PACKAGE_FILE_NAME and
# the name of the component. See cpack_configure_downloads for more
# information.
##end
#
##macro
# cpack_add_component_group - Describes a group of related CPack
# installation components.
#
# cpack_add_component_group(groupname
# [DISPLAY_NAME name]
# [DESCRIPTION description]
# [PARENT_GROUP parent]
# [EXPANDED]
# [BOLD_TITLE])
#
# The cpack_add_component_group describes a group of installation
# components, which will be placed together within the listing of
# options. Typically, component groups allow the user to
# select/deselect all of the components within a single group via a
# single group-level option. Use component groups to reduce the
# complexity of installers with many options. groupname is an
# arbitrary name used to identify the group in the GROUP argument of
# the cpack_add_component command, which is used to place a
# component in a group. The name of the group must not conflict with
# the name of any component.
#
# DISPLAY_NAME is the displayed name of the component group, used in
# graphical installers to display the component group name. This
# value can be any string.
#
# DESCRIPTION is an extended description of the component group,
# used in graphical installers to give the user additional
# information about the components within that group. Descriptions
# can span multiple lines using "\n" as the line
# separator. Typically, these descriptions should be no more than a
# few lines long.
#
# PARENT_GROUP, if supplied, names the parent group of this group.
# Parent groups are used to establish a hierarchy of groups,
# providing an arbitrary hierarchy of groups.
#
# EXPANDED indicates that, by default, the group should show up as
# "expanded", so that the user immediately sees all of the
# components within the group. Otherwise, the group will initially
# show up as a single entry.
#
# BOLD_TITLE indicates that the group title should appear in bold,
# to call the user's attention to the group.
##end
#
##macro
# cpack_add_install_type - Add a new installation type containing a
# set of predefined component selections to the graphical installer.
#
# cpack_add_install_type(typename
# [DISPLAY_NAME name])
#
# The cpack_add_install_type command identifies a set of preselected
# components that represents a common use case for an
# application. For example, a "Developer" install type might include
# an application along with its header and library files, while an
# "End user" install type might just include the application's
# executable. Each component identifies itself with one or more
# install types via the INSTALL_TYPES argument to
# cpack_add_component.
#
# DISPLAY_NAME is the displayed name of the install type, which will
# typically show up in a drop-down box within a graphical
# installer. This value can be any string.
##end
#
##macro
# cpack_configure_downloads - Configure CPack to download selected
# components on-the-fly as part of the installation process.
#
# cpack_configure_downloads(site
# [UPLOAD_DIRECTORY dirname]
# [ALL]
# [ADD_REMOVE|NO_ADD_REMOVE])
#
# The cpack_configure_downloads command configures installation-time
# downloads of selected components. For each downloadable component,
# CPack will create an archive containing the contents of that
# component, which should be uploaded to the given site. When the
# user selects that component for installation, the installer will
# download and extract the component in place. This feature is
# useful for creating small installers that only download the
# requested components, saving bandwidth. Additionally, the
# installers are small enough that they will be installed as part of
# the normal installation process, and the "Change" button in
# Windows Add/Remove Programs control panel will allow one to add or
# remove parts of the application after the original
# installation. On Windows, the downloaded-components functionality
# requires the ZipDLL plug-in for NSIS, available at:
#
# http://nsis.sourceforge.net/ZipDLL_plug-in
#
# On Mac OS X, installers that download components on-the-fly can
# only be built and installed on system using Mac OS X 10.5 or
# later.
#
# The site argument is a URL where the archives for downloadable
# components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/
# All of the archives produced by CPack should be uploaded to that location.
#
# UPLOAD_DIRECTORY is the local directory where CPack will create the
# various archives for each of the components. The contents of this
# directory should be uploaded to a location accessible by the URL given
# in the site argument. If omitted, CPack will use the directory
# CPackUploads inside the CMake binary directory to store the generated
# archives.
#
# The ALL flag indicates that all components be downloaded. Otherwise, only
# those components explicitly marked as DOWNLOADED or that have a specified
# ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies
# ADD_REMOVE (unless NO_ADD_REMOVE is specified).
#
# ADD_REMOVE indicates that CPack should install a copy of the installer
# that can be called from Windows' Add/Remove Programs dialog (via the
# "Modify" button) to change the set of installed components. NO_ADD_REMOVE
# turns off this behavior. This option is ignored on Mac OS X.
##endmacro
#=============================================================================
# Copyright 2006-2009 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
# License text for the above reference.)
# Define var in order to avoid multiple inclusion
IF(NOT CPackComponent_CMake_INCLUDED)
SET(CPackComponent_CMake_INCLUDED 1)
# Argument-parsing macro from http://www.cmake.org/Wiki/CMakeMacroParseArguments
MACRO(cpack_parse_arguments prefix arg_names option_names)
SET(${prefix}_DEFAULT_ARGS)
FOREACH(arg_name ${arg_names})
SET(${prefix}_${arg_name})
ENDFOREACH(arg_name)
FOREACH(option ${option_names})
SET(${prefix}_${option} FALSE)
ENDFOREACH(option)
SET(current_arg_name DEFAULT_ARGS)
SET(current_arg_list)
FOREACH(arg ${ARGN})
SET(larg_names ${arg_names})
LIST(FIND larg_names "${arg}" is_arg_name)
IF (is_arg_name GREATER -1)
SET(${prefix}_${current_arg_name} ${current_arg_list})
SET(current_arg_name ${arg})
SET(current_arg_list)
ELSE (is_arg_name GREATER -1)
SET(loption_names ${option_names})
LIST(FIND loption_names "${arg}" is_option)
IF (is_option GREATER -1)
SET(${prefix}_${arg} TRUE)
ELSE (is_option GREATER -1)
SET(current_arg_list ${current_arg_list} ${arg})
ENDIF (is_option GREATER -1)
ENDIF (is_arg_name GREATER -1)
ENDFOREACH(arg)
SET(${prefix}_${current_arg_name} ${current_arg_list})
ENDMACRO(cpack_parse_arguments)
# Macro that appends a SET command for the given variable name (var)
# to the macro named strvar, but only if the variable named "var"
# has been defined. The string will eventually be appended to a CPack
# configuration file.
MACRO(cpack_append_variable_set_command var strvar)
IF (DEFINED ${var})
SET(${strvar} "${${strvar}}SET(${var}")
FOREACH(APPENDVAL ${${var}})
SET(${strvar} "${${strvar}} ${APPENDVAL}")
ENDFOREACH(APPENDVAL)
SET(${strvar} "${${strvar}})\n")
ENDIF (DEFINED ${var})
ENDMACRO(cpack_append_variable_set_command)
# Macro that appends a SET command for the given variable name (var)
# to the macro named strvar, but only if the variable named "var"
# has been defined and is a string. The string will eventually be
# appended to a CPack configuration file.
MACRO(cpack_append_string_variable_set_command var strvar)
IF (DEFINED ${var})
LIST(LENGTH ${var} CPACK_APP_VALUE_LEN)
IF(${CPACK_APP_VALUE_LEN} EQUAL 1)
SET(${strvar} "${${strvar}}SET(${var} \"${${var}}\")\n")
ENDIF(${CPACK_APP_VALUE_LEN} EQUAL 1)
ENDIF (DEFINED ${var})
ENDMACRO(cpack_append_string_variable_set_command)
# Macro that appends a SET command for the given variable name (var)
# to the macro named strvar, but only if the variable named "var"
# has been set to true. The string will eventually be
# appended to a CPack configuration file.
MACRO(cpack_append_option_set_command var strvar)
IF (${var})
LIST(LENGTH ${var} CPACK_APP_VALUE_LEN)
IF(${CPACK_APP_VALUE_LEN} EQUAL 1)
SET(${strvar} "${${strvar}}SET(${var} TRUE)\n")
ENDIF(${CPACK_APP_VALUE_LEN} EQUAL 1)
ENDIF (${var})
ENDMACRO(cpack_append_option_set_command)
# Macro that adds a component to the CPack installer
MACRO(cpack_add_component compname)
STRING(TOUPPER ${compname} CPACK_ADDCOMP_UNAME)
cpack_parse_arguments(CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}
"DISPLAY_NAME;DESCRIPTION;GROUP;DEPENDS;INSTALL_TYPES;ARCHIVE_FILE"
"HIDDEN;REQUIRED;DISABLED;DOWNLOADED"
${ARGN}
)
if (CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED)
SET(CPACK_ADDCOMP_STR "\n# Configuration for downloaded component \"${compname}\"\n")
else ()
SET(CPACK_ADDCOMP_STR "\n# Configuration for component \"${compname}\"\n")
endif ()
IF(NOT CPACK_MONOLITHIC_INSTALL)
# If the user didn't set CPACK_COMPONENTS_ALL explicitly, update the
# value of CPACK_COMPONENTS_ALL in the configuration file. This will
# take care of any components that have been added after the CPack
# moduled was included.
IF(NOT CPACK_COMPONENTS_ALL_SET_BY_USER)
GET_CMAKE_PROPERTY(CPACK_ADDCOMP_COMPONENTS COMPONENTS)
SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR}\nSET(CPACK_COMPONENTS_ALL")
FOREACH(COMP ${CPACK_ADDCOMP_COMPONENTS})
SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR} ${COMP}")
ENDFOREACH(COMP)
SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR})\n")
ENDIF(NOT CPACK_COMPONENTS_ALL_SET_BY_USER)
ENDIF(NOT CPACK_MONOLITHIC_INSTALL)
cpack_append_string_variable_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISPLAY_NAME
CPACK_ADDCOMP_STR)
cpack_append_string_variable_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DESCRIPTION
CPACK_ADDCOMP_STR)
cpack_append_variable_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_GROUP
CPACK_ADDCOMP_STR)
cpack_append_variable_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DEPENDS
CPACK_ADDCOMP_STR)
cpack_append_variable_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_INSTALL_TYPES
CPACK_ADDCOMP_STR)
cpack_append_string_variable_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_ARCHIVE_FILE
CPACK_ADDCOMP_STR)
cpack_append_option_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_HIDDEN
CPACK_ADDCOMP_STR)
cpack_append_option_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_REQUIRED
CPACK_ADDCOMP_STR)
cpack_append_option_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISABLED
CPACK_ADDCOMP_STR)
cpack_append_option_set_command(
CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED
CPACK_ADDCOMP_STR)
# Backward compatibility issue.
# Write to config iff the macros is used after CPack.cmake has been
# included, other it's not necessary because the variables
# will be encoded by cpack_encode_variables.
IF(CPack_CMake_INCLUDED)
FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDCOMP_STR}")
ENDIF(CPack_CMake_INCLUDED)
ENDMACRO(cpack_add_component)
# Macro that adds a component group to the CPack installer
MACRO(cpack_add_component_group grpname)
STRING(TOUPPER ${grpname} CPACK_ADDGRP_UNAME)
cpack_parse_arguments(CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}
"DISPLAY_NAME;DESCRIPTION"
"EXPANDED;BOLD_TITLE"
${ARGN}
)
SET(CPACK_ADDGRP_STR "\n# Configuration for component group \"${grpname}\"\n")
cpack_append_string_variable_set_command(
CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DISPLAY_NAME
CPACK_ADDGRP_STR)
cpack_append_string_variable_set_command(
CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DESCRIPTION
CPACK_ADDGRP_STR)
cpack_append_option_set_command(
CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_EXPANDED
CPACK_ADDGRP_STR)
cpack_append_option_set_command(
CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_BOLD_TITLE
CPACK_ADDGRP_STR)
# Backward compatibility issue.
# Write to config iff the macros is used after CPack.cmake has been
# included, other it's not necessary because the variables
# will be encoded by cpack_encode_variables.
IF(CPack_CMake_INCLUDED)
FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDGRP_STR}")
ENDIF(CPack_CMake_INCLUDED)
ENDMACRO(cpack_add_component_group)
# Macro that adds an installation type to the CPack installer
MACRO(cpack_add_install_type insttype)
STRING(TOUPPER ${insttype} CPACK_INSTTYPE_UNAME)
cpack_parse_arguments(CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}
"DISPLAY_NAME"
""
${ARGN}
)
SET(CPACK_INSTTYPE_STR
"\n# Configuration for installation type \"${insttype}\"\n")
SET(CPACK_INSTTYPE_STR
"${CPACK_INSTTYPE_STR}LIST(APPEND CPACK_ALL_INSTALL_TYPES ${insttype})\n")
cpack_append_string_variable_set_command(
CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}_DISPLAY_NAME
CPACK_INSTTYPE_STR)
# Backward compatibility issue.
# Write to config iff the macros is used after CPack.cmake has been
# included, other it's not necessary because the variables
# will be encoded by cpack_encode_variables.
IF(CPack_CMake_INCLUDED)
FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_INSTTYPE_STR}")
ENDIF(CPack_CMake_INCLUDED)
ENDMACRO(cpack_add_install_type)
MACRO(cpack_configure_downloads site)
cpack_parse_arguments(CPACK_DOWNLOAD
"UPLOAD_DIRECTORY"
"ALL;ADD_REMOVE;NO_ADD_REMOVE"
${ARGN}
)
SET(CPACK_CONFIG_DL_STR
"\n# Downloaded components configuration\n")
SET(CPACK_UPLOAD_DIRECTORY ${CPACK_DOWNLOAD_UPLOAD_DIRECTORY})
SET(CPACK_DOWNLOAD_SITE ${site})
cpack_append_string_variable_set_command(
CPACK_DOWNLOAD_SITE
CPACK_CONFIG_DL_STR)
cpack_append_string_variable_set_command(
CPACK_UPLOAD_DIRECTORY
CPACK_CONFIG_DL_STR)
cpack_append_option_set_command(
CPACK_DOWNLOAD_ALL
CPACK_CONFIG_DL_STR)
IF (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE})
SET(CPACK_DOWNLOAD_ADD_REMOVE ON)
ENDIF (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE})
SET(CPACK_ADD_REMOVE ${CPACK_DOWNLOAD_ADD_REMOVE})
cpack_append_option_set_command(
CPACK_ADD_REMOVE
CPACK_CONFIG_DL_STR)
# Backward compatibility issue.
# Write to config iff the macros is used after CPack.cmake has been
# included, other it's not necessary because the variables
# will be encoded by cpack_encode_variables.
IF(CPack_CMake_INCLUDED)
FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_CONFIG_DL_STR}")
ENDIF(CPack_CMake_INCLUDED)
ENDMACRO(cpack_configure_downloads)
ENDIF(NOT CPackComponent_CMake_INCLUDED)