CMake/Modules/CMakePackageConfigHelpers.c...

284 lines
12 KiB
CMake

# - CONFIGURE_PACKAGE_CONFIG_FILE(), WRITE_BASIC_PACKAGE_VERSION_FILE()
#
# CONFIGURE_PACKAGE_CONFIG_FILE(<input> <output> INSTALL_DESTINATION <path>
# [PATH_VARS <var1> <var2> ... <varN>]
# [NO_SET_AND_CHECK_MACRO]
# [NO_CHECK_REQUIRED_COMPONENTS_MACRO]
# [NO_FIND_DEPENDENCY_MACRO])
#
# CONFIGURE_PACKAGE_CONFIG_FILE() should be used instead of the plain
# configure_file() command when creating the <Name>Config.cmake or <Name>-config.cmake
# file for installing a project or library. It helps making the resulting package
# relocatable by avoiding hardcoded paths in the installed Config.cmake file.
#
# In a FooConfig.cmake file there may be code like this to make the
# install destinations know to the using project:
# set(FOO_INCLUDE_DIR "@CMAKE_INSTALL_FULL_INCLUDEDIR@" )
# set(FOO_DATA_DIR "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" )
# set(FOO_ICONS_DIR "@CMAKE_INSTALL_PREFIX@/share/icons" )
# ...logic to determine installedPrefix from the own location...
# set(FOO_CONFIG_DIR "${installedPrefix}/@CONFIG_INSTALL_DIR@" )
# All 4 options shown above are not sufficient, since the first 3 hardcode
# the absolute directory locations, and the 4th case works only if the logic
# to determine the installedPrefix is correct, and if CONFIG_INSTALL_DIR contains
# a relative path, which in general cannot be guaranteed.
# This has the effect that the resulting FooConfig.cmake file would work poorly
# under Windows and OSX, where users are used to choose the install location
# of a binary package at install time, independent from how CMAKE_INSTALL_PREFIX
# was set at build/cmake time.
#
# Using CONFIGURE_PACKAGE_CONFIG_FILE() helps. If used correctly, it makes the
# resulting FooConfig.cmake file relocatable.
# Usage:
# 1. write a FooConfig.cmake.in file as you are used to
# 2. insert a line containing only the string "@PACKAGE_INIT@"
# 3. instead of set(FOO_DIR "@SOME_INSTALL_DIR@"), use set(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@")
# (this must be after the @PACKAGE_INIT@ line)
# 4. instead of using the normal configure_file(), use CONFIGURE_PACKAGE_CONFIG_FILE()
#
# The <input> and <output> arguments are the input and output file, the same way
# as in configure_file().
#
# The <path> given to INSTALL_DESTINATION must be the destination where the FooConfig.cmake
# file will be installed to. This can either be a relative or absolute path, both work.
#
# The variables <var1> to <varN> given as PATH_VARS are the variables which contain
# install destinations. For each of them the macro will create a helper variable
# PACKAGE_<var...>. These helper variables must be used
# in the FooConfig.cmake.in file for setting the installed location. They are calculated
# by CONFIGURE_PACKAGE_CONFIG_FILE() so that they are always relative to the
# installed location of the package. This works both for relative and also for absolute locations.
# For absolute locations it works only if the absolute location is a subdirectory
# of CMAKE_INSTALL_PREFIX.
#
# By default configure_package_config_file() also generates two helper macros,
# set_and_check() and check_required_components() into the FooConfig.cmake file.
#
# set_and_check() should be used instead of the normal set()
# command for setting directories and file locations. Additionally to setting the
# variable it also checks that the referenced file or directory actually exists
# and fails with a FATAL_ERROR otherwise. This makes sure that the created
# FooConfig.cmake file does not contain wrong references.
# When using the NO_SET_AND_CHECK_MACRO, this macro is not generated into the
# FooConfig.cmake file.
#
# check_required_components(<package_name>) should be called at the end of the
# FooConfig.cmake file if the package supports components.
# This macro checks whether all requested, non-optional components have been found,
# and if this is not the case, sets the Foo_FOUND variable to FALSE, so that the package
# is considered to be not found.
# It does that by testing the Foo_<Component>_FOUND variables for all requested
# required components.
# When using the NO_CHECK_REQUIRED_COMPONENTS option, this macro is not generated
# into the FooConfig.cmake file.
#
# For an example see below the documentation for WRITE_BASIC_PACKAGE_VERSION_FILE().
#
#
# WRITE_BASIC_PACKAGE_VERSION_FILE( filename VERSION major.minor.patch COMPATIBILITY (AnyNewerVersion|SameMajorVersion|ExactVersion) )
#
# Writes a file for use as <package>ConfigVersion.cmake file to <filename>.
# See the documentation of find_package() for details on this.
# filename is the output filename, it should be in the build tree.
# major.minor.patch is the version number of the project to be installed
# The COMPATIBILITY mode AnyNewerVersion means that the installed package version
# will be considered compatible if it is newer or exactly the same as the requested version.
# This mode should be used for packages which are fully backward compatible,
# also across major versions.
# If SameMajorVersion is used instead, then the behaviour differs from AnyNewerVersion
# in that the major version number must be the same as requested, e.g. version 2.0 will
# not be considered compatible if 1.0 is requested.
# This mode should be used for packages which guarantee backward compatibility within the
# same major version.
# If ExactVersion is used, then the package is only considered compatible if the requested
# version matches exactly its own version number (not considering the tweak version).
# For example, version 1.2.3 of a package is only considered compatible to requested version 1.2.3.
# This mode is for packages without compatibility guarantees.
# If your project has more elaborated version matching rules, you will need to write your
# own custom ConfigVersion.cmake file instead of using this macro.
#
# Internally, this macro executes configure_file() to create the resulting
# version file. Depending on the COMPATIBLITY, either the file
# BasicConfigVersion-SameMajorVersion.cmake.in or BasicConfigVersion-AnyNewerVersion.cmake.in
# is used. Please note that these two files are internal to CMake and you should
# not call configure_file() on them yourself, but they can be used as starting
# point to create more sophisticted custom ConfigVersion.cmake files.
#
#
# Example using both configure_package_config_file() and write_basic_package_version_file():
# CMakeLists.txt:
# set(INCLUDE_INSTALL_DIR include/ ... CACHE )
# set(LIB_INSTALL_DIR lib/ ... CACHE )
# set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE )
# ...
# include(CMakePackageConfigHelpers)
# configure_package_config_file(FooConfig.cmake.in ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
# INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake
# PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR)
# write_basic_package_version_file(${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
# VERSION 1.2.3
# COMPATIBILITY SameMajorVersion )
# install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
# DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake )
#
# With a FooConfig.cmake.in:
# set(FOO_VERSION x.y.z)
# ...
# @PACKAGE_INIT@
# ...
# set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
# set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@")
#
# check_required_components(Foo)
#=============================================================================
# Copyright 2012 Alexander Neundorf <neundorf@kde.org>
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
# License text for the above reference.)
include(CMakeParseArguments)
include(WriteBasicConfigVersionFile)
macro(WRITE_BASIC_PACKAGE_VERSION_FILE)
write_basic_config_version_file(${ARGN})
endmacro()
function(CONFIGURE_PACKAGE_CONFIG_FILE _inputFile _outputFile)
set(options NO_SET_AND_CHECK_MACRO NO_CHECK_REQUIRED_COMPONENTS_MACRO NO_FIND_DEPENDENCY_MACRO)
set(oneValueArgs INSTALL_DESTINATION )
set(multiValueArgs PATH_VARS )
cmake_parse_arguments(CCF "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
if(CCF_UNPARSED_ARGUMENTS)
message(FATAL_ERROR "Unknown keywords given to CONFIGURE_PACKAGE_CONFIG_FILE(): \"${CCF_UNPARSED_ARGUMENTS}\"")
endif()
if(NOT CCF_INSTALL_DESTINATION)
message(FATAL_ERROR "No INSTALL_DESTINATION given to CONFIGURE_PACKAGE_CONFIG_FILE()")
endif()
if(IS_ABSOLUTE "${CCF_INSTALL_DESTINATION}")
set(absInstallDir "${CCF_INSTALL_DESTINATION}")
else()
set(absInstallDir "${CMAKE_INSTALL_PREFIX}/${CCF_INSTALL_DESTINATION}")
endif()
file(RELATIVE_PATH PACKAGE_RELATIVE_PATH "${absInstallDir}" "${CMAKE_INSTALL_PREFIX}" )
foreach(var ${CCF_PATH_VARS})
if(NOT DEFINED ${var})
message(FATAL_ERROR "Variable ${var} does not exist")
else()
if(IS_ABSOLUTE "${${var}}")
string(REPLACE "${CMAKE_INSTALL_PREFIX}" "\${PACKAGE_PREFIX_DIR}"
PACKAGE_${var} "${${var}}")
else()
set(PACKAGE_${var} "\${PACKAGE_PREFIX_DIR}/${${var}}")
endif()
endif()
endforeach()
get_filename_component(inputFileName "${_inputFile}" NAME)
set(PACKAGE_INIT "
####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() #######
####### Any changes to this file will be overwritten by the next CMake run ####
####### The input file was ${inputFileName} ########
get_filename_component(PACKAGE_PREFIX_DIR \"\${CMAKE_CURRENT_LIST_DIR}/${PACKAGE_RELATIVE_PATH}\" ABSOLUTE)
")
if("${absInstallDir}" MATCHES "^(/usr)?/lib(64)?/.+")
# Handle "/usr move" symlinks created by some Linux distros.
set(PACKAGE_INIT "${PACKAGE_INIT}
# Use original install prefix when loaded through a \"/usr move\"
# cross-prefix symbolic link such as /lib -> /usr/lib.
get_filename_component(_realCurr \"\${CMAKE_CURRENT_LIST_DIR}\" REALPATH)
get_filename_component(_realOrig \"${absInstallDir}\" REALPATH)
if(_realCurr STREQUAL _realOrig)
set(PACKAGE_PREFIX_DIR \"${CMAKE_INSTALL_PREFIX}\")
endif()
unset(_realOrig)
unset(_realCurr)
")
endif()
if(NOT CCF_NO_SET_AND_CHECK_MACRO)
set(PACKAGE_INIT "${PACKAGE_INIT}
macro(set_and_check _var _file)
set(\${_var} \"\${_file}\")
if(NOT EXISTS \"\${_file}\")
message(FATAL_ERROR \"File or directory \${_file} referenced by variable \${_var} does not exist !\")
endif()
endmacro()
")
endif()
if(NOT CCF_NO_CHECK_REQUIRED_COMPONENTS_MACRO)
set(PACKAGE_INIT "${PACKAGE_INIT}
macro(check_required_components _NAME)
foreach(comp \${\${_NAME}_FIND_COMPONENTS})
if(NOT \${_NAME}_\${comp}_FOUND)
if(\${_NAME}_FIND_REQUIRED_\${comp})
set(\${_NAME}_FOUND FALSE)
endif()
endif()
endforeach()
endmacro()
")
endif()
if(NOT CCF_NO_FIND_DEPENDENCY_MACRO)
set(PACKAGE_INIT "${PACKAGE_INIT}
macro(find_dependency dep)
if (NOT \${dep}_FOUND)
if (\${ARGV1})
set(version \${ARGV1})
endif()
set(exact_arg)
if(\${CMAKE_FIND_PACKAGE_NAME}_FIND_VERSION_EXACT)
set(exact_arg EXACT)
endif()
set(quiet_arg)
if(\${CMAKE_FIND_PACKAGE_NAME}_FIND_QUIETLY)
set(quiet_arg QUIET)
endif()
set(required_arg)
if(\${CMAKE_FIND_PACKAGE_NAME}_FIND_REQUIRED)
set(required_arg REQUIRED)
endif()
find_package(\${dep} \${version} \${exact_arg} \${quiet_arg} \${required_arg})
if (NOT \${dep}_FOUND)
set(\${CMAKE_FIND_PACKAGE_NAME}_NOT_FOUND_MESSAGE \"\${CMAKE_FIND_PACKAGE_NAME} could not be found because dependency \${dep} could not be found.\")
set(\${CMAKE_FIND_PACKAGE_NAME}_FOUND False)
return()
endif()
set(required_arg)
set(quiet_arg)
set(exact_arg)
endif()
endmacro()
")
endif()
set(PACKAGE_INIT "${PACKAGE_INIT}
####################################################################################")
configure_file("${_inputFile}" "${_outputFile}" @ONLY)
endfunction()