CMake/Tests/ExternalProjectLocal/CMakeLists.txt

230 lines
7.1 KiB
CMake

cmake_minimum_required(VERSION 2.8)
project(ExternalProjectLocalTest NONE)
include(ExternalProject)
# Test ExternalProject with local projects
option(ExternalProjectTest_USE_FOLDERS "Enable folder grouping in IDEs." ON)
if(ExternalProjectTest_USE_FOLDERS)
set_property(GLOBAL PROPERTY USE_FOLDERS ON)
else()
set_property(GLOBAL PROPERTY USE_FOLDERS OFF)
endif()
set_property(GLOBAL PROPERTY PREDEFINED_TARGETS_FOLDER
"CMakePredefinedTargets-in-ExternalProjectTest")
set(base "${CMAKE_BINARY_DIR}/CMakeExternals")
set(binary_base "${base}/Build")
set_property(DIRECTORY PROPERTY EP_BASE ${base})
set_property(DIRECTORY PROPERTY EP_STEP_TARGETS configure build test)
if(NOT DEFINED can_build_tutorial_step5)
set(can_build_tutorial_step5 1)
# Tutorial Step5 cannot build correctly using Visual Studio 6
# on Windows 98 if the path of its build tree exceeds 72
# characters in length... So don't attempt to build it
# in a long path on Win98:
#
if(CMAKE_SYSTEM STREQUAL "Windows-4.10")
string(LENGTH "${binary_base}/TutorialStep5-Local" n)
if(n GREATER 72)
set(can_build_tutorial_step5 0)
endif()
endif()
# The ExternalProject builds of Tutorial Step5 cannot be built
# correctly 2nd and later times in an in-source build...
# (because the CMakeCache.txt from the real in-source build of
# the Tests/Tutorial/Step5 directory gets copied when we do
# the "source directory copy" step... but it still refers to
# its original path which yields a configure error.) So:
#
if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
set(can_build_tutorial_step5 0)
endif()
endif()
# Local DIR:
#
if(can_build_tutorial_step5)
set(proj TutorialStep5-Local)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/../Tutorial/Step5"
CMAKE_CACHE_ARGS -DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR>
CMAKE_ARGS -G ${CMAKE_GENERATOR} <SOURCE_DIR>
TEST_BEFORE_INSTALL 1
LOG_INSTALL 1
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local")
ExternalProject_Get_Property(${proj} install_dir)
set(TutorialStep5_install_dir ${install_dir})
set(proj TutorialStep5-Local-TestAfterInstall)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/../Tutorial/Step5"
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR> -G ${CMAKE_GENERATOR} <SOURCE_DIR>
TEST_AFTER_INSTALL 1
LOG_TEST 1
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local")
endif()
# Local TAR:
#
set(proj TutorialStep1-LocalTAR)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/Step1.tar"
URL_MD5 a87c5b47c0201c09ddfe1d5738fdb1e3
LIST_SEPARATOR ::
PATCH_COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_SOURCE_DIR}/Step1Patch.cmake
CMAKE_GENERATOR "${CMAKE_GENERATOR}"
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR>
-DTEST_LIST:STRING=A::B::C
INSTALL_COMMAND ""
LOG_CONFIGURE 1
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local/TAR")
set(proj TutorialStep1-LocalNoDirTAR)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/Step1NoDir.tar"
URL_MD5 d09e3d370c5c908fa035c30939ee438e
LIST_SEPARATOR @@
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR> -G ${CMAKE_GENERATOR} <SOURCE_DIR>
-DTEST_LIST:STRING=1@@2@@3
INSTALL_COMMAND ""
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local/TAR")
ExternalProject_Add_Step(${proj} mypatch
COMMAND ${CMAKE_COMMAND} -E echo "This is a custom external project step."
COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_SOURCE_DIR}/Step1Patch.cmake
WORKING_DIRECTORY <SOURCE_DIR>
DEPENDEES download
DEPENDERS configure
)
# Local TGZ:
#
set(proj TutorialStep1-LocalTGZ)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/Step1.tgz"
URL_MD5 38c648e817339c356f6be00eeed79bd0
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR> -G ${CMAKE_GENERATOR} <SOURCE_DIR>
INSTALL_COMMAND ""
LOG_BUILD 1
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local/TGZ")
set(proj TutorialStep1-LocalNoDirTGZ)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/Step1NoDir.tgz"
URL_HASH SHA256=496229e2a5ed620a37c385ad9406004a18026beab8b55dd2c4565d4b7f1d5383
CMAKE_GENERATOR "${CMAKE_GENERATOR}"
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR>
INSTALL_COMMAND ""
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local/TGZ")
# Local BZ2:
#
# (The bz2 tests are here just to verify that the bz2 decompression is executed
# during a test suite run... The configure and build commands are set to
# nothing to make the test quicker. To make this more complete, I should add
# a diff between this and the TGZ source tree since that one does build...)
#
set(proj TutorialStep1-LocalBZ2)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/Step1.tar.bz2"
CONFIGURE_COMMAND ""
BUILD_COMMAND ""
INSTALL_COMMAND ""
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local/BZ2")
set(proj TutorialStep1-LocalNoDirBZ2)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/Step1NoDir.tar.bz2"
CONFIGURE_COMMAND ""
BUILD_COMMAND ""
INSTALL_COMMAND ""
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local/BZ2")
# Local ZIP:
#
# (The zip tests are here just to verify that the zip decompression is executed
# during a test suite run... The configure and build commands are set to
# nothing to make the test quicker. To make this more complete, I should add
# a diff between this and the TGZ source tree since that one does build...)
#
set(proj TutorialStep1-LocalZIP)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/Step1.zip"
CONFIGURE_COMMAND ""
BUILD_COMMAND ""
INSTALL_COMMAND ""
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local/ZIP")
set(proj TutorialStep1-LocalNoDirZIP)
ExternalProject_Add(${proj}
URL "${CMAKE_CURRENT_SOURCE_DIR}/Step1NoDir.zip"
CONFIGURE_COMMAND ""
BUILD_COMMAND ""
INSTALL_COMMAND ""
)
set_property(TARGET ${proj} PROPERTY FOLDER "Local/ZIP")
# Test the testable built/installed products:
#
enable_testing()
# Do at least a smoke test of a built executable from each
# project's build directory...
#
# BuildTree tests:
#
if(can_build_tutorial_step5)
add_test(TutorialStep5-Local-BuildTreeTest
"${binary_base}/TutorialStep5-Local/Tutorial" 42)
set_property(TEST TutorialStep5-Local-BuildTreeTest
APPEND PROPERTY LABELS Step5 BuildTree)
endif()
add_test(TutorialStep1-LocalTAR-BuildTreeTest
"${binary_base}/TutorialStep1-LocalTAR/EP-Tutorial" 36)
set_property(TEST TutorialStep1-LocalTAR-BuildTreeTest
APPEND PROPERTY LABELS TAR)
add_test(TutorialStep1-LocalNoDirTAR-BuildTreeTest
"${binary_base}/TutorialStep1-LocalNoDirTAR/EP-Tutorial" 25)
add_test(TutorialStep1-LocalTGZ-BuildTreeTest
"${binary_base}/TutorialStep1-LocalTGZ/Tutorial" 16)
set_property(TEST TutorialStep1-LocalTGZ-BuildTreeTest
APPEND PROPERTY LABELS TGZ)
add_test(TutorialStep1-LocalNoDirTGZ-BuildTreeTest
"${binary_base}/TutorialStep1-LocalNoDirTGZ/Tutorial" 9)
# InstallTree tests:
#
if(can_build_tutorial_step5)
add_test(TutorialStep5-InstallTreeTest
"${TutorialStep5_install_dir}/bin/Tutorial" 49)
set_property(TEST TutorialStep5-InstallTreeTest
APPEND PROPERTY LABELS Step5 InstallTree)
endif()
message(STATUS "can_build_tutorial_step5='${can_build_tutorial_step5}'")