# - Build binary and source package installers # # The CPack module generates binary and source installers in a variety # of formats using the cpack program. Inclusion of the CPack module # adds two new targets to the resulting makefiles, package and # package_source, which build the binary and source installers, # respectively. The generated binary installers contain everything # installed via CMake's INSTALL command (and the deprecated # INSTALL_FILES, INSTALL_PROGRAMS, and INSTALL_TARGETS commands). # # For certain kinds of binary installers (including the graphical # installers on Mac OS X and Windows), CPack generates installers that # allow users to select individual application components to # install. The contents of each of the components are identified by # the COMPONENT argument of CMake's INSTALL command. These components # can be annotated with user-friendly names and descriptions, # inter-component dependencies, etc., and grouped in various ways to # customize the resulting installer. See the cpack_add_* commands, # described below, for more information about component-specific # installations. # # Before including the CPack module, there are a variety of variables # that can be set to customize the resulting installers. The most # commonly-used variables are: # # CPACK_PACKAGE_NAME - The name of the package (or application). If # not specified, defaults to the project name. # # CPACK_PACKAGE_VENDOR - The name of the package vendor (e.g., # "Kitware"). # # CPACK_PACKAGE_VERSION_MAJOR - Package major Version # # CPACK_PACKAGE_VERSION_MINOR - Package minor Version # # CPACK_PACKAGE_VERSION_PATCH - Package patch Version # # CPACK_PACKAGE_DESCRIPTION_FILE - A text file used to describe the # project. Used, for example, the introduction screen of a # CPack-generated Windows installer to describe the project. # # CPACK_PACKAGE_DESCRIPTION_SUMMARY - Short description of the # project (only a few words). # # CPACK_PACKAGE_FILE_NAME - The name of the package file to generate, # not including the extension. For example, cmake-2.6.1-Linux-i686. # # CPACK_PACKAGE_INSTALL_DIRECTORY - Installation directory on the # target system, e.g., "CMake 2.5". # # CPACK_RESOURCE_FILE_LICENSE - License file for the project, which # will typically be displayed to the user (often with an explicit # "Accept" button, for graphical installers) prior to installation. # # CPACK_RESOURCE_FILE_README - ReadMe file for the project, which # typically describes in some detail # # CPACK_RESOURCE_FILE_WELCOME - Welcome file for the project, which # welcomes users to this installer. Typically used in the graphical # installers on Windows and Mac OS X. # # CPACK_MONOLITHIC_INSTALL - Disables the component-based # installation mechanism, so that all components are always installed. # # CPACK_GENERATOR - List of CPack generators to use. If not # specified, CPack will create a set of options (e.g., # CPACK_BINARY_NSIS) allowing the user to enable/disable individual # generators. # # CPACK_OUTPUT_CONFIG_FILE - The name of the CPack configuration file # for binary installers that will be generated by the CPack # module. Defaults to CPackConfig.cmake. # # CPACK_PACKAGE_EXECUTABLES - Lists each of the executables along # with a text label, to be used to create Start Menu shortcuts on # Windows. For example, setting this to the list ccmake;CMake will # create a shortcut named "CMake" that will execute the installed # executable ccmake. # # CPACK_STRIP_FILES - List of files to be stripped. Starting with # CMake 2.6.0 CPACK_STRIP_FILES will be a boolean variable which # enables stripping of all files (a list of files evaluates to TRUE # in CMake, so this change is compatible). # # The following CPack variables are specific to source packages, and # will not affect binary packages: # # CPACK_SOURCE_PACKAGE_FILE_NAME - The name of the source package, # e.g., cmake-2.6.1 # # CPACK_SOURCE_STRIP_FILES - List of files in the source tree that # will be stripped. Starting with CMake 2.6.0 # CPACK_SOURCE_STRIP_FILES will be a boolean variable which enables # stripping of all files (a list of files evaluates to TRUE in CMake, # so this change is compatible). # # CPACK_SOURCE_GENERATOR - List of generators used for the source # packages. As with CPACK_GENERATOR, if this is not specified then # CPack will create a set of options (e.g., CPACK_SOURCE_ZIP) # allowing users to select which packages will be generated. # # CPACK_SOURCE_OUTPUT_CONFIG_FILE - The name of the CPack # configuration file for source installers that will be generated by # the CPack module. Defaults to CPackSourceConfig.cmake. # # CPACK_SOURCE_IGNORE_FILES - Pattern of files in the source tree # that won't be packaged when building a source package. This is a # list of patterns, e.g., /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.* # # The following variables are specific to the DragNDrop installers # built on Mac OS X: # # CPACK_DMG_VOLUME_NAME - The volume name of the generated disk # image. Defaults to CPACK_PACKAGE_FILE_NAME. # # CPACK_DMG_FORMAT - The disk image format. Common values are UDRO # (UDIF read-only), UDZO (UDIF zlib-compressed) or UDBZ (UDIF # bzip2-compressed). Refer to hdiutil(1) for more information on # other available formats. # # CPACK_DMG_DS_STORE - Path to a custom .DS_Store file which e.g. # can be used to specify the Finder window position/geometry and # layout (such as hidden toolbars, placement of the icons etc.). # This file has to be generated by the Finder (either manually or # through OSA-script) using a normal folder from which the .DS_Store # file can then be extracted. # # CPACK_DMG_BACKGROUND_IMAGE - Path to an image file which is to be # used as the background for the Finder Window when the disk image # is opened. By default no background image is set. The background # image is applied after applying the custom .DS_Store file. # # CPACK_COMMAND_HDIUTIL - Path to the hdiutil(1) command used to # operate on disk image files on Mac OS X. This variable can be used # to override the automatically detected command (or specify its # location if the auto-detection fails to find it.) # # CPACK_COMMAND_SETFILE - Path to the SetFile(1) command used to set # extended attributes on files and directories on Mac OS X. This # variable can be used to override the automatically detected # command (or specify its location if the auto-detection fails to # find it.) # # CPACK_COMMAND_REZ - Path to the Rez(1) command used to compile # resources on Mac OS X. This variable can be used to override the # automatically detected command (or specify its location if the # auto-detection fails to find it.) # # The following variables are specific to the graphical installers built # on Windows using the Nullsoft Installation System. # # CPACK_PACKAGE_INSTALL_REGISTRY_KEY - Registry key used when # installing this project. # # CPACK_NSIS_MUI_ICON - The icon file (.ico) for the generated # install program. # # CPACK_NSIS_MUI_UNIICON - The icon file (.ico) for the generated # uninstall program. # # CPACK_PACKAGE_ICON - A branding image that will be displayed inside # the installer. # # CPACK_NSIS_EXTRA_INSTALL_COMMANDS - Extra NSIS commands that will # be added to the install Section. # # CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS - Extra NSIS commands that will # be added to the uninstall Section. # # CPACK_NSIS_COMPRESSOR - The arguments that will be passed to the # NSIS SetCompressor command. # # CPACK_NSIS_MODIFY_PATH - If this is set to "ON", then an extra page # will appear in the installer that will allow the user to choose # whether the program directory should be added to the system PATH # variable. # # CPACK_NSIS_DISPLAY_NAME - The display name string that appears in # the Windows Add/Remove Program control panel # # CPACK_NSIS_PACKAGE_NAME - The title displayed at the top of the # installer. # # CPACK_NSIS_INSTALLED_ICON_NAME - A path to the executable that # contains the installer icon. # # CPACK_NSIS_HELP_LINK - URL to a web site providing assistance in # installing your application. # # CPACK_NSIS_URL_INFO_ABOUT - URL to a web site providing more # information about your application. # # CPACK_NSIS_CONTACT - Contact information for questions and comments # about the installation process. # # CPACK_NSIS_CREATE_ICONS_EXTRA - Additional NSIS commands for # creating start menu shortcuts. # # CPACK_NSIS_DELETE_ICONS_EXTRA -Additional NSIS commands to # uninstall start menu shortcuts. # # The following variable is specific to installers build on Mac OS X # using PackageMaker: # # CPACK_OSX_PACKAGE_VERSION - The version of Mac OS X that the # resulting PackageMaker archive should be compatible # with. Different versions of Mac OS X support different # features. For example, CPack can only build component-based # installers for Mac OS X 10.4 or newer, and can only build # installers that download component son-the-fly for Mac OS X 10.5 # or newer. If left blank, this value will be set to the minimum # version of Mac OS X that supports the requested features. Set this # variable to some value (e.g., 10.4) only if you want to guarantee # that your installer will work on that version of Mac OS X, and # don't mind missing extra features available in the installer # shipping with later versions of Mac OS X. # # The following variables are for advanced uses of CPack: # # CPACK_CMAKE_GENERATOR - What CMake generator should be used if the # project is CMake project. Defaults to the value of CMAKE_GENERATOR; # few users will want to change this setting. # # CPACK_INSTALL_CMAKE_PROJECTS - List of four values that specify # what project to install. The four values are: Build directory, # Project Name, Project Component, Directory. If omitted, CPack will # build an installer that installers everything. # # CPACK_SYSTEM_NAME - System name, defaults to the value of # ${CMAKE_SYSTEM_NAME}. # # CPACK_PACKAGE_VERSION - Package full version, used internally. By # default, this is built from CPACK_PACKAGE_VERSION_MAJOR, # CPACK_PACKAGE_VERSION_MINOR, and CPACK_PACKAGE_VERSION_PATCH. # # CPACK_TOPLEVEL_TAG - Directory for the installed files. # # CPACK_INSTALL_COMMANDS - Extra commands to install components. # # CPACK_INSTALL_DIRECTORIES - Extra directories to install. # # Component-specific installation allows users to select specific sets # of components to install during the install process. Installation # components are identified by the COMPONENT argument of CMake's # INSTALL commands, and should be further described by the following # CPack commands: # # cpack_add_component - Describes a CPack installation component # named by the COMPONENT argument to a CMake INSTALL command. # # cpack_add_component(compname # [DISPLAY_NAME name] # [DESCRIPTION description] # [HIDDEN | REQUIRED | DISABLED ] # [GROUP group] # [DEPENDS comp1 comp2 ... ] # [INSTALL_TYPES type1 type2 ... ] # [DOWNLOADED] # [ARCHIVE_FILE filename]) # # The cmake_add_component command describes an installation # component, which the user can opt to install or remove as part of # the graphical installation process. compname is the name of the # component, as provided to the COMPONENT argument of one or more # CMake INSTALL commands. # # DISPLAY_NAME is the displayed name of the component, used in # graphical installers to display the component name. This value can # be any string. # # DESCRIPTION is an extended description of the component, used in # graphical installers to give the user additional information about # the component. Descriptions can span multiple lines using "\n" as # the line separator. Typically, these descriptions should be no # more than a few lines long. # # HIDDEN indicates that this component will be hidden in the # graphical installer, so that the user cannot directly change # whether it is installed or not. # # REQUIRED indicates that this component is required, and therefore # will always be installed. It will be visible in the graphical # installer, but it cannot be unselected. (Typically, required # components are shown greyed out). # # DISABLED indicates that this component should be disabled # (unselected) by default. The user is free to select this component # for installation, unless it is also HIDDEN. # # DEPENDS lists the components on which this component depends. If # this component is selected, then each of the components listed # must also be selected. The dependency information is encoded # within the installer itself, so that users cannot install # inconsitent sets of components. # # GROUP names the component group of which this component is a # part. If not provided, the component will be a standalone # component, not part of any component group. Component groups are # described with the cpack_add_component_group command, detailed # below. # # INSTALL_TYPES lists the installation types of which this component # is a part. When one of these installations types is selected, this # component will automatically be selected. Installation types are # described with the cpack_add_install_type command, detailed below. # # DOWNLOADED indicates that this component should be downloaded # on-the-fly by the installer, rather than packaged in with the # installer itself. For more information, see the cpack_configure_downloads # command. # # ARCHIVE_FILE provides a name for the archive file created by CPack # to be used for downloaded components. If not supplied, CPack will # create a file with some name based on CPACK_PACKAGE_FILE_NAME and # the name of the component. See cpack_configure_downloads for more # information. # # cpack_add_component_group - Describes a group of related CPack # installation components. # # cpack_add_component_group(groupname # [DISPLAY_NAME name] # [DESCRIPTION description] # [PARENT_GROUP parent] # [EXPANDED] # [BOLD_TITLE]) # # The cpack_add_component_group describes a group of installation # components, which will be placed together within the listing of # options. Typically, component groups allow the user to # select/deselect all of the components within a single group via a # single group-level option. Use component groups to reduce the # complexity of installers with many options. groupname is an # arbitrary name used to identify the group in the GROUP argument of # the cpack_add_component command, which is used to place a # component in a group. The name of the group must not conflict with # the name of any component. # # DISPLAY_NAME is the displayed name of the component group, used in # graphical installers to display the component group name. This # value can be any string. # # DESCRIPTION is an extended description of the component group, # used in graphical installers to give the user additional # information about the components within that group. Descriptions # can span multiple lines using "\n" as the line # separator. Typically, these descriptions should be no more than a # few lines long. # # PARENT_GROUP, if supplied, names the parent group of this group. # Parent groups are used to establish a hierarchy of groups, # providing an arbitrary hierarchy of groups. # # EXPANDED indicates that, by default, the group should show up as # "expanded", so that the user immediately sees all of the # components within the group. Otherwise, the group will initially # show up as a single entry. # # BOLD_TITLE indicates that the group title should appear in bold, # to call the user's attention to the group. # # cpack_add_install_type - Add a new installation type containing a # set of predefined component selections to the graphical installer. # # cpack_add_install_type(typename # [DISPLAY_NAME name]) # # The cpack_add_install_type command identifies a set of preselected # components that represents a common use case for an # application. For example, a "Developer" install type might include # an application along with its header and library files, while an # "End user" install type might just include the application's # executable. Each component identifies itself with one or more # install types via the INSTALL_TYPES argument to # cpack_add_component. # # DISPLAY_NAME is the displayed name of the install type, which will # typically show up in a drop-down box within a graphical # installer. This value can be any string. # # cpack_configure_downloads - Configure CPack to download selected # components on-the-fly as part of the installation process. # # cpack_configure_downloads(site # [UPLOAD_DIRECTORY dirname] # [ALL] # [ADD_REMOVE|NO_ADD_REMOVE]) # # The cpack_configure_downloads command configures installation-time # downloads of selected components. For each downloadable component, # CPack will create an archive containing the contents of that # component, which should be uploaded to the given site. When the # user selects that component for installation, the installer will # download and extract the component in place. This feature is # useful for creating small installers that only download the # requested components, saving bandwidth. Additionally, the # installers are small enough that they will be installed as part of # the normal installation process, and the "Change" button in # Windows Add/Remove Programs control panel will allow one to add or # remove parts of the application after the original # installation. On Windows, the downloaded-components functionality # requires the ZipDLL plug-in for NSIS, available at: # # http://nsis.sourceforge.net/ZipDLL_plug-in # # On Mac OS X, installers that download components on-the-fly can # only be built and installed on system using Mac OS X 10.5 or # later. # # The site argument is a URL where the archives for downloadable # components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/ # All of the archives produced by CPack should be uploaded to that location. # # UPLOAD_DIRECTORY is the local directory where CPack will create the # various archives for each of the components. The contents of this # directory should be uploaded to a location accessible by the URL given # in the site argument. If omitted, CPack will use the directory # CPackUploads inside the CMake binary directory to store the generated # archives. # # The ALL flag indicates that all components be downloaded. Otherwise, only # those components explicitly marked as DOWNLOADED or that have a specified # ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies # ADD_REMOVE (unless NO_ADD_REMOVE is specified). # # ADD_REMOVE indicates that CPack should install a copy of the installer # that can be called from Windows' Add/Remove Programs dialog (via the # "Modify" button) to change the set of installed components. NO_ADD_REMOVE # turns off this behavior. This option is ignored on Mac OS X. #============================================================================= # Copyright 2006-2009 Kitware, Inc. # # Distributed under the OSI-approved BSD License (the "License"); # see accompanying file Copyright.txt for details. # # This software is distributed WITHOUT ANY WARRANTY; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the License for more information. #============================================================================= # (To distributed this file outside of CMake, substitute the full # License text for the above reference.) # Pick a configuration file SET(cpack_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in") IF(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") SET(cpack_input_file "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") ENDIF(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") SET(cpack_source_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in") IF(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") SET(cpack_source_input_file "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") ENDIF(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") # Argument-parsing macro from http://www.cmake.org/Wiki/CMakeMacroParseArguments MACRO(cpack_parse_arguments prefix arg_names option_names) SET(${prefix}_DEFAULT_ARGS) FOREACH(arg_name ${arg_names}) SET(${prefix}_${arg_name}) ENDFOREACH(arg_name) FOREACH(option ${option_names}) SET(${prefix}_${option} FALSE) ENDFOREACH(option) SET(current_arg_name DEFAULT_ARGS) SET(current_arg_list) FOREACH(arg ${ARGN}) SET(larg_names ${arg_names}) LIST(FIND larg_names "${arg}" is_arg_name) IF (is_arg_name GREATER -1) SET(${prefix}_${current_arg_name} ${current_arg_list}) SET(current_arg_name ${arg}) SET(current_arg_list) ELSE (is_arg_name GREATER -1) SET(loption_names ${option_names}) LIST(FIND loption_names "${arg}" is_option) IF (is_option GREATER -1) SET(${prefix}_${arg} TRUE) ELSE (is_option GREATER -1) SET(current_arg_list ${current_arg_list} ${arg}) ENDIF (is_option GREATER -1) ENDIF (is_arg_name GREATER -1) ENDFOREACH(arg) SET(${prefix}_${current_arg_name} ${current_arg_list}) ENDMACRO(cpack_parse_arguments) # Macro that appends a SET command for the given variable name (var) # to the macro named strvar, but only if the variable named "var" # has been defined. The string will eventually be appended to a CPack # configuration file. MACRO(cpack_append_variable_set_command var strvar) IF (DEFINED ${var}) SET(${strvar} "${${strvar}}SET(${var}") FOREACH(APPENDVAL ${${var}}) SET(${strvar} "${${strvar}} ${APPENDVAL}") ENDFOREACH(APPENDVAL) SET(${strvar} "${${strvar}})\n") ENDIF (DEFINED ${var}) ENDMACRO(cpack_append_variable_set_command) # Macro that appends a SET command for the given variable name (var) # to the macro named strvar, but only if the variable named "var" # has been defined and is a string. The string will eventually be # appended to a CPack configuration file. MACRO(cpack_append_string_variable_set_command var strvar) IF (DEFINED ${var}) LIST(LENGTH ${var} CPACK_APP_VALUE_LEN) IF(${CPACK_APP_VALUE_LEN} EQUAL 1) SET(${strvar} "${${strvar}}SET(${var} \"${${var}}\")\n") ENDIF(${CPACK_APP_VALUE_LEN} EQUAL 1) ENDIF (DEFINED ${var}) ENDMACRO(cpack_append_string_variable_set_command) # Macro that appends a SET command for the given variable name (var) # to the macro named strvar, but only if the variable named "var" # has been set to true. The string will eventually be # appended to a CPack configuration file. MACRO(cpack_append_option_set_command var strvar) IF (${var}) LIST(LENGTH ${var} CPACK_APP_VALUE_LEN) IF(${CPACK_APP_VALUE_LEN} EQUAL 1) SET(${strvar} "${${strvar}}SET(${var} TRUE)\n") ENDIF(${CPACK_APP_VALUE_LEN} EQUAL 1) ENDIF (${var}) ENDMACRO(cpack_append_option_set_command) # Macro that adds a component to the CPack installer MACRO(cpack_add_component compname) STRING(TOUPPER ${compname} CPACK_ADDCOMP_UNAME) cpack_parse_arguments(CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME} "DISPLAY_NAME;DESCRIPTION;GROUP;DEPENDS;INSTALL_TYPES;ARCHIVE_FILE" "HIDDEN;REQUIRED;DISABLED;DOWNLOADED" ${ARGN} ) if (CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED) SET(CPACK_ADDCOMP_STR "\n# Configuration for downloaded component \"${compname}\"\n") else () SET(CPACK_ADDCOMP_STR "\n# Configuration for component \"${compname}\"\n") endif () IF(NOT CPACK_MONOLITHIC_INSTALL) # If the user didn't set CPACK_COMPONENTS_ALL explicitly, update the # value of CPACK_COMPONENTS_ALL in the configuration file. This will # take care of any components that have been added after the CPack # moduled was included. IF(NOT CPACK_COMPONENTS_ALL_SET_BY_USER) GET_CMAKE_PROPERTY(CPACK_ADDCOMP_COMPONENTS COMPONENTS) SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR}\nSET(CPACK_COMPONENTS_ALL") FOREACH(COMP ${CPACK_ADDCOMP_COMPONENTS}) SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR} ${COMP}") ENDFOREACH(COMP) SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR})\n") ENDIF(NOT CPACK_COMPONENTS_ALL_SET_BY_USER) ENDIF(NOT CPACK_MONOLITHIC_INSTALL) cpack_append_string_variable_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISPLAY_NAME CPACK_ADDCOMP_STR) cpack_append_string_variable_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DESCRIPTION CPACK_ADDCOMP_STR) cpack_append_variable_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_GROUP CPACK_ADDCOMP_STR) cpack_append_variable_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DEPENDS CPACK_ADDCOMP_STR) cpack_append_variable_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_INSTALL_TYPES CPACK_ADDCOMP_STR) cpack_append_string_variable_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_ARCHIVE_FILE CPACK_ADDCOMP_STR) cpack_append_option_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_HIDDEN CPACK_ADDCOMP_STR) cpack_append_option_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_REQUIRED CPACK_ADDCOMP_STR) cpack_append_option_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISABLED CPACK_ADDCOMP_STR) cpack_append_option_set_command( CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED CPACK_ADDCOMP_STR) FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDCOMP_STR}") ENDMACRO(cpack_add_component) # Macro that adds a component group to the CPack installer MACRO(cpack_add_component_group grpname) STRING(TOUPPER ${grpname} CPACK_ADDGRP_UNAME) cpack_parse_arguments(CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME} "DISPLAY_NAME;DESCRIPTION" "EXPANDED;BOLD_TITLE" ${ARGN} ) SET(CPACK_ADDGRP_STR "\n# Configuration for component group \"${grpname}\"\n") cpack_append_string_variable_set_command( CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DISPLAY_NAME CPACK_ADDGRP_STR) cpack_append_string_variable_set_command( CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DESCRIPTION CPACK_ADDGRP_STR) cpack_append_option_set_command( CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_EXPANDED CPACK_ADDGRP_STR) cpack_append_option_set_command( CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_BOLD_TITLE CPACK_ADDGRP_STR) FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDGRP_STR}") ENDMACRO(cpack_add_component_group) # Macro that adds an installation type to the CPack installer MACRO(cpack_add_install_type insttype) STRING(TOUPPER ${insttype} CPACK_INSTTYPE_UNAME) cpack_parse_arguments(CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME} "DISPLAY_NAME" "" ${ARGN} ) SET(CPACK_INSTTYPE_STR "\n# Configuration for installation type \"${insttype}\"\n") SET(CPACK_INSTTYPE_STR "${CPACK_INSTTYPE_STR}LIST(APPEND CPACK_ALL_INSTALL_TYPES ${insttype})\n") cpack_append_string_variable_set_command( CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}_DISPLAY_NAME CPACK_INSTTYPE_STR) FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_INSTTYPE_STR}") ENDMACRO(cpack_add_install_type) MACRO(cpack_configure_downloads site) cpack_parse_arguments(CPACK_DOWNLOAD "UPLOAD_DIRECTORY" "ALL;ADD_REMOVE;NO_ADD_REMOVE" ${ARGN} ) SET(CPACK_CONFIG_DL_STR "\n# Downloaded components configuration\n") SET(CPACK_UPLOAD_DIRECTORY ${CPACK_DOWNLOAD_UPLOAD_DIRECTORY}) SET(CPACK_DOWNLOAD_SITE ${site}) cpack_append_string_variable_set_command( CPACK_DOWNLOAD_SITE CPACK_CONFIG_DL_STR) cpack_append_string_variable_set_command( CPACK_UPLOAD_DIRECTORY CPACK_CONFIG_DL_STR) cpack_append_option_set_command( CPACK_DOWNLOAD_ALL CPACK_CONFIG_DL_STR) IF (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE}) SET(CPACK_DOWNLOAD_ADD_REMOVE ON) ENDIF (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE}) SET(CPACK_ADD_REMOVE ${CPACK_DOWNLOAD_ADD_REMOVE}) cpack_append_option_set_command( CPACK_ADD_REMOVE CPACK_CONFIG_DL_STR) FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_CONFIG_DL_STR}") ENDMACRO(cpack_configure_downloads) # Macro for setting values if a user did not overwrite them MACRO(cpack_set_if_not_set name value) IF(NOT DEFINED "${name}") SET(${name} "${value}") ENDIF(NOT DEFINED "${name}") ENDMACRO(cpack_set_if_not_set) # Macro to encode variables for the configuration file # find any varable that stars with CPACK and create a variable # _CPACK_OTHER_VARIABLES_ that contains SET commands for # each cpack variable. _CPACK_OTHER_VARIABLES_ is then # used as an @ replacment in configure_file for the CPackConfig. MACRO(cpack_encode_variables) SET(_CPACK_OTHER_VARIABLES_) GET_CMAKE_PROPERTY(res VARIABLES) FOREACH(var ${res}) IF("xxx${var}" MATCHES "xxxCPACK") SET(_CPACK_OTHER_VARIABLES_ "${_CPACK_OTHER_VARIABLES_}\nSET(${var} \"${${var}}\")") ENDIF("xxx${var}" MATCHES "xxxCPACK") ENDFOREACH(var ${res}) ENDMACRO(cpack_encode_variables) # Set the package name cpack_set_if_not_set(CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}") cpack_set_if_not_set(CPACK_PACKAGE_VERSION_MAJOR "0") cpack_set_if_not_set(CPACK_PACKAGE_VERSION_MINOR "1") cpack_set_if_not_set(CPACK_PACKAGE_VERSION_PATCH "1") cpack_set_if_not_set(CPACK_PACKAGE_VERSION "${CPACK_PACKAGE_VERSION_MAJOR}.${CPACK_PACKAGE_VERSION_MINOR}.${CPACK_PACKAGE_VERSION_PATCH}") cpack_set_if_not_set(CPACK_PACKAGE_VENDOR "Humanity") cpack_set_if_not_set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "${CMAKE_PROJECT_NAME} built using CMake") cpack_set_if_not_set(CPACK_PACKAGE_DESCRIPTION_FILE "${CMAKE_ROOT}/Templates/CPack.GenericDescription.txt") cpack_set_if_not_set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_ROOT}/Templates/CPack.GenericLicense.txt") cpack_set_if_not_set(CPACK_RESOURCE_FILE_README "${CMAKE_ROOT}/Templates/CPack.GenericDescription.txt") cpack_set_if_not_set(CPACK_RESOURCE_FILE_WELCOME "${CMAKE_ROOT}/Templates/CPack.GenericWelcome.txt") cpack_set_if_not_set(CPACK_MODULE_PATH "${CMAKE_MODULE_PATH}") IF(CPACK_NSIS_MODIFY_PATH) SET(CPACK_NSIS_MODIFY_PATH ON) ENDIF(CPACK_NSIS_MODIFY_PATH) SET(__cpack_system_name ${CMAKE_SYSTEM_NAME}) IF(${__cpack_system_name} MATCHES Windows) IF(CMAKE_CL_64) SET(__cpack_system_name win64) ELSE(CMAKE_CL_64) SET(__cpack_system_name win32) ENDIF(CMAKE_CL_64) ENDIF(${__cpack_system_name} MATCHES Windows) cpack_set_if_not_set(CPACK_SYSTEM_NAME "${__cpack_system_name}") # -..--. cpack_set_if_not_set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}") cpack_set_if_not_set(CPACK_PACKAGE_INSTALL_DIRECTORY "${CPACK_PACKAGE_NAME} ${CPACK_PACKAGE_VERSION}") cpack_set_if_not_set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY "${CPACK_PACKAGE_NAME} ${CPACK_PACKAGE_VERSION}") cpack_set_if_not_set(CPACK_PACKAGE_DEFAULT_LOCATION "/") cpack_set_if_not_set(CPACK_PACKAGE_RELOCATABLE "true") # always force to exactly "true" or "false" for CPack.Info.plist.in: if(CPACK_PACKAGE_RELOCATABLE) set(CPACK_PACKAGE_RELOCATABLE "true") else(CPACK_PACKAGE_RELOCATABLE) set(CPACK_PACKAGE_RELOCATABLE "false") endif(CPACK_PACKAGE_RELOCATABLE) macro(cpack_check_file_exists file description) if(NOT EXISTS "${file}") message(SEND_ERROR "CPack ${description} file: \"${file}\" could not be found.") endif(NOT EXISTS "${file}") endmacro(cpack_check_file_exists) cpack_check_file_exists("${CPACK_PACKAGE_DESCRIPTION_FILE}" "package description") cpack_check_file_exists("${CPACK_RESOURCE_FILE_LICENSE}" "license resource") cpack_check_file_exists("${CPACK_RESOURCE_FILE_README}" "readme resource") cpack_check_file_exists("${CPACK_RESOURCE_FILE_WELCOME}" "welcome resource") macro(cpack_optional_append _list _cond _item) if(${_cond}) set(${_list} ${${_list}} ${_item}) endif(${_cond}) endmacro(cpack_optional_append _list _cond _item) # Provide options to choose generators # we might check here if the required tools for the generates exist # and set the defaults according to the results if(NOT CPACK_GENERATOR) if(UNIX) if(CYGWIN) option(CPACK_BINARY_CYGWIN "Enable to build Cygwin binary packages" ON) else(CYGWIN) if(APPLE) option(CPACK_BINARY_BUNDLE "Enable to build OSX bundles" OFF) option(CPACK_BINARY_DRAGNDROP "Enable to build OSX Drag And Drop package" OFF) option(CPACK_BINARY_PACKAGEMAKER "Enable to build PackageMaker packages" ON) option(CPACK_BINARY_OSXX11 "Enable to build OSX X11 packages" OFF) else(APPLE) option(CPACK_BINARY_TZ "Enable to build TZ packages" ON) endif(APPLE) option(CPACK_BINARY_STGZ "Enable to build STGZ packages" ON) option(CPACK_BINARY_TGZ "Enable to build TGZ packages" ON) option(CPACK_BINARY_TBZ2 "Enable to build TBZ2 packages" OFF) option(CPACK_BINARY_DEB "Enable to build Debian packages" OFF) option(CPACK_BINARY_RPM "Enable to build RPM packages" OFF) option(CPACK_BINARY_NSIS "Enable to build NSIS packages" OFF) endif(CYGWIN) else(UNIX) option(CPACK_BINARY_NSIS "Enable to build NSIS packages" ON) option(CPACK_BINARY_ZIP "Enable to build ZIP packages" OFF) endif(UNIX) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_BUNDLE Bundle) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_DRAGNDROP DragNDrop) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_PACKAGEMAKER PackageMaker) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_OSXX11 OSXX11) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_CYGWIN CygwinBinary) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_DEB DEB) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_RPM RPM) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_NSIS NSIS) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_STGZ STGZ) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TGZ TGZ) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TBZ2 TBZ2) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TZ TZ) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_ZIP ZIP) endif(NOT CPACK_GENERATOR) # Provide options to choose source generators if(NOT CPACK_SOURCE_GENERATOR) if(UNIX) if(CYGWIN) option(CPACK_SOURCE_CYGWIN "Enable to build Cygwin source packages" ON) else(CYGWIN) option(CPACK_SOURCE_TBZ2 "Enable to build TBZ2 source packages" ON) option(CPACK_SOURCE_TGZ "Enable to build TGZ source packages" ON) option(CPACK_SOURCE_TZ "Enable to build TZ source packages" ON) option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" OFF) endif(CYGWIN) else(UNIX) option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" ON) endif(UNIX) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_CYGWIN CygwinSource) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TGZ TGZ) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TBZ2 TBZ2) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TZ TZ) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_ZIP ZIP) endif(NOT CPACK_SOURCE_GENERATOR) # mark the above options as advanced mark_as_advanced(CPACK_BINARY_CYGWIN CPACK_BINARY_PACKAGEMAKER CPACK_BINARY_OSXX11 CPACK_BINARY_STGZ CPACK_BINARY_TGZ CPACK_BINARY_TBZ2 CPACK_BINARY_DEB CPACK_BINARY_RPM CPACK_BINARY_TZ CPACK_BINARY_NSIS CPACK_BINARY_ZIP CPACK_BINARY_BUNDLE CPACK_SOURCE_CYGWIN CPACK_SOURCE_TBZ2 CPACK_SOURCE_TGZ CPACK_SOURCE_TZ CPACK_SOURCE_ZIP CPACK_BINARY_DRAGNDROP) # Set some other variables cpack_set_if_not_set(CPACK_INSTALL_CMAKE_PROJECTS "${CMAKE_BINARY_DIR};${CMAKE_PROJECT_NAME};ALL;/") cpack_set_if_not_set(CPACK_CMAKE_GENERATOR "${CMAKE_GENERATOR}") cpack_set_if_not_set(CPACK_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}") # if the user has set CPACK_NSIS_DISPLAY_NAME remember it if(DEFINED CPACK_NSIS_DISPLAY_NAME) SET(CPACK_NSIS_DISPLAY_NAME_SET TRUE) endif() # if the user has set CPACK_NSIS_DISPLAY # explicitly, then use that as the default # value of CPACK_NSIS_PACKAGE_NAME instead # of CPACK_PACKAGE_INSTALL_DIRECTORY cpack_set_if_not_set(CPACK_NSIS_DISPLAY_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}") if(CPACK_NSIS_DISPLAY_NAME_SET) string(REPLACE "\\" "\\\\" _NSIS_DISPLAY_NAME_TMP "${CPACK_NSIS_DISPLAY_NAME}") cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${_NSIS_DISPLAY_NAME_TMP}") else() cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}") endif() cpack_set_if_not_set(CPACK_OUTPUT_CONFIG_FILE "${CMAKE_BINARY_DIR}/CPackConfig.cmake") cpack_set_if_not_set(CPACK_SOURCE_OUTPUT_CONFIG_FILE "${CMAKE_BINARY_DIR}/CPackSourceConfig.cmake") cpack_set_if_not_set(CPACK_SET_DESTDIR OFF) cpack_set_if_not_set(CPACK_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}") cpack_set_if_not_set(CPACK_NSIS_INSTALLER_ICON_CODE "") cpack_set_if_not_set(CPACK_NSIS_INSTALLER_MUI_ICON_CODE "") IF(DEFINED CPACK_COMPONENTS_ALL) IF(CPACK_MONOLITHIC_INSTALL) MESSAGE("CPack warning: both CPACK_COMPONENTS_ALL and CPACK_MONOLITHIC_INSTALL have been set.\nDefaulting to a monolithic installation.") SET(CPACK_COMPONENTS_ALL) ELSE(CPACK_MONOLITHIC_INSTALL) # The user has provided the set of components to be installed as # part of a component-based installation; trust her. SET(CPACK_COMPONENTS_ALL_SET_BY_USER TRUE) ENDIF(CPACK_MONOLITHIC_INSTALL) ELSE(DEFINED CPACK_COMPONENTS_ALL) # If the user has not specifically requested a monolithic installer # but has specified components in various "install" commands, tell # CPack about those components. IF(NOT CPACK_MONOLITHIC_INSTALL) GET_CMAKE_PROPERTY(CPACK_COMPONENTS_ALL COMPONENTS) LIST(LENGTH CPACK_COMPONENTS_ALL CPACK_COMPONENTS_LEN) IF(CPACK_COMPONENTS_LEN EQUAL 1) # Only one component: this is not a component-based installation # (at least, it isn't a component-based installation, but may # become one later if the user uses the cpack_add_* commands). SET(CPACK_COMPONENTS_ALL) ENDIF(CPACK_COMPONENTS_LEN EQUAL 1) SET(CPACK_COMPONENTS_LEN) ENDIF(NOT CPACK_MONOLITHIC_INSTALL) ENDIF(DEFINED CPACK_COMPONENTS_ALL) # CMake always generates a component named "Unspecified", which is # used to install everything that doesn't have an explicitly-provided # component. Since these files should always be installed, we'll make # them hidden and required. set(CPACK_COMPONENT_UNSPECIFIED_HIDDEN TRUE) set(CPACK_COMPONENT_UNSPECIFIED_REQUIRED TRUE) cpack_encode_variables() configure_file("${cpack_input_file}" "${CPACK_OUTPUT_CONFIG_FILE}" @ONLY IMMEDIATE) # Generate source file cpack_set_if_not_set(CPACK_SOURCE_INSTALLED_DIRECTORIES "${CMAKE_SOURCE_DIR};/") cpack_set_if_not_set(CPACK_SOURCE_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}-Source") cpack_set_if_not_set(CPACK_SOURCE_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-Source") cpack_set_if_not_set(CPACK_SOURCE_IGNORE_FILES "/CVS/;/\\\\\\\\.svn/;\\\\\\\\.swp$;\\\\\\\\.#;/#") SET(CPACK_INSTALL_CMAKE_PROJECTS "${CPACK_SOURCE_INSTALL_CMAKE_PROJECTS}") SET(CPACK_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES}") SET(CPACK_GENERATOR "${CPACK_SOURCE_GENERATOR}") SET(CPACK_TOPLEVEL_TAG "${CPACK_SOURCE_TOPLEVEL_TAG}") SET(CPACK_PACKAGE_FILE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}") SET(CPACK_IGNORE_FILES "${CPACK_SOURCE_IGNORE_FILES}") SET(CPACK_STRIP_FILES "${CPACK_SOURCE_STRIP_FILES}") cpack_encode_variables() configure_file("${cpack_source_input_file}" "${CPACK_SOURCE_OUTPUT_CONFIG_FILE}" @ONLY IMMEDIATE)