#.rst: # CPackRPM # -------- # # The builtin (binary) CPack RPM generator (Unix only) # # Variables specific to CPack RPM generator # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # CPackRPM may be used to create RPM package using CPack. CPackRPM is a # CPack generator thus it uses the CPACK_XXX variables used by CPack : # http://www.cmake.org/Wiki/CMake:CPackConfiguration # # However CPackRPM has specific features which are controlled by the # specifics CPACK_RPM_XXX variables. CPackRPM is a component aware # generator so when CPACK_RPM_COMPONENT_INSTALL is ON some more # CPACK_RPM__XXXX variables may be used in order to have # component specific values. Note however that refers # to the **grouping name**. This may be either a component name or a # component GROUP name. Usually those vars correspond to RPM spec file # entities, one may find information about spec files here # http://www.rpm.org/wiki/Docs. You'll find a detailed usage of # CPackRPM on the wiki: # # :: # # http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29 # # However as a handy reminder here comes the list of specific variables: # # .. variable:: CPACK_RPM_PACKAGE_SUMMARY # CPACK_RPM__PACKAGE_SUMMARY # # The RPM package summary. # # * Mandatory : YES # * Default : CPACK_PACKAGE_DESCRIPTION_SUMMARY # # .. variable:: CPACK_RPM_PACKAGE_NAME # # The RPM package name. # # * Mandatory : YES # * Default : CPACK_PACKAGE_NAME # # .. variable:: CPACK_RPM_PACKAGE_VERSION # # The RPM package version. # # * Mandatory : YES # * Default : CPACK_PACKAGE_VERSION # # .. variable:: CPACK_RPM_PACKAGE_ARCHITECTURE # CPACK_RPM__PACKAGE_ARCHITECTURE # # The RPM package architecture. # # * Mandatory : YES # * Default : Native architecture output by "uname -m" # # This may be set to "noarch" if you know you are building a noarch package. # # .. variable:: CPACK_RPM_PACKAGE_RELEASE # # The RPM package release. # # * Mandatory : YES # * Default : 1 # # This is the numbering of the RPM package itself, i.e. the version of the # packaging and not the version of the content (see # CPACK_RPM_PACKAGE_VERSION). One may change the default value if the # previous packaging was buggy and/or you want to put here a fancy Linux # distro specific numbering. # # .. variable:: CPACK_RPM_PACKAGE_LICENSE # # The RPM package license policy. # # * Mandatory : YES # * Default : "unknown" # # .. variable:: CPACK_RPM_PACKAGE_GROUP # # The RPM package group. # # * Mandatory : YES # * Default : "unknown" # # .. variable:: CPACK_RPM_PACKAGE_VENDOR # # The RPM package vendor. # # * Mandatory : YES # * Default : CPACK_PACKAGE_VENDOR if set or "unknown" # # .. variable:: CPACK_RPM_PACKAGE_URL # # The projects URL. # # * Mandatory : NO # * Default : - # # .. variable:: CPACK_RPM_PACKAGE_DESCRIPTION # CPACK_RPM__PACKAGE_DESCRIPTION # # RPM package description. # # * Mandatory : YES # * Default : CPACK_COMPONENT__DESCRIPTION (component based installers # only) if set, CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package # description available" # # .. variable:: CPACK_RPM_COMPRESSION_TYPE # # RPM compression type. # # * Mandatory : NO # * Default : - # # May be used to override RPM compression type to be used to build the # RPM. For example some Linux distribution now default to lzma or xz # compression whereas older cannot use such RPM. Using this one can enforce # compression type to be used. Possible value are: lzma, xz, bzip2 and gzip. # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES # # RPM spec requires field. # # * Mandatory : NO # * Default : - # # May be used to set RPM dependencies (requires). Note that you must enclose # the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8") # # The required package list of an RPM file could be printed with:: # # rpm -qp --requires file.rpm # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PRE # # RPM spec requires(pre) field. # # * Mandatory : NO # * Default : - # # May be used to set RPM preinstall dependencies (requires(pre)). Note that you must enclose # the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES_PRE "shadow-utils, initscripts") # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POST # # RPM spec requires(post) field. # # * Mandatory : NO # * Default : - # # May be used to set RPM postinstall dependencies (requires(post)). Note that you must enclose # the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES_POST "shadow-utils, initscripts") # # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POSTUN # # RPM spec requires(postun) field. # # * Mandatory : NO # * Default : - # # May be used to set RPM postuninstall dependencies (requires(postun)). Note that you must enclose # the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES_POSTUN "shadow-utils, initscripts") # # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PREUN # # RPM spec requires(preun) field. # # * Mandatory : NO # * Default : - # # May be used to set RPM preuninstall dependencies (requires(preun)). Note that you must enclose # the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES_PREUN "shadow-utils, initscripts") # # .. variable:: CPACK_RPM_PACKAGE_SUGGESTS # # RPM spec suggest field. # # * Mandatory : NO # * Default : - # # May be used to set weak RPM dependencies (suggests). Note that you must # enclose the complete requires string between quotes. # # .. variable:: CPACK_RPM_PACKAGE_PROVIDES # # RPM spec provides field. # # * Mandatory : NO # * Default : - # # May be used to set RPM dependencies (provides). The provided package list # of an RPM file could be printed with:: # # rpm -qp --provides file.rpm # # .. variable:: CPACK_RPM_PACKAGE_OBSOLETES # # RPM spec obsoletes field. # # * Mandatory : NO # * Default : - # # May be used to set RPM packages that are obsoleted by this one. # # .. variable:: CPACK_RPM_PACKAGE_RELOCATABLE # # build a relocatable RPM. # # * Mandatory : NO # * Default : CPACK_PACKAGE_RELOCATABLE # # If this variable is set to TRUE or ON CPackRPM will try # to build a relocatable RPM package. A relocatable RPM may # be installed using:: # # rpm --prefix or --relocate # # in order to install it at an alternate place see rpm(8). Note that # currently this may fail if CPACK_SET_DESTDIR is set to ON. If # CPACK_SET_DESTDIR is set then you will get a warning message but if there # is file installed with absolute path you'll get unexpected behavior. # # .. variable:: CPACK_RPM_SPEC_INSTALL_POST # # * Mandatory : NO # * Default : - # * Deprecated: YES # # This way of specifying post-install script is deprecated, use # CPACK_RPM_POST_INSTALL_SCRIPT_FILE. # May be used to set an RPM post-install command inside the spec file. # For example setting it to "/bin/true" may be used to prevent # rpmbuild to strip binaries. # # .. variable:: CPACK_RPM_SPEC_MORE_DEFINE # # RPM extended spec definitions lines. # # * Mandatory : NO # * Default : - # # May be used to add any %define lines to the generated spec file. # # .. variable:: CPACK_RPM_PACKAGE_DEBUG # # Toggle CPackRPM debug output. # # * Mandatory : NO # * Default : - # # May be set when invoking cpack in order to trace debug information # during CPack RPM run. For example you may launch CPack like this:: # # cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM # # .. variable:: CPACK_RPM_USER_BINARY_SPECFILE # # A user provided spec file. # # * Mandatory : NO # * Default : - # # May be set by the user in order to specify a USER binary spec file # to be used by CPackRPM instead of generating the file. # The specified file will be processed by configure_file( @ONLY). # One can provide a component specific file by setting # CPACK_RPM__USER_BINARY_SPECFILE. # # .. variable:: CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE # # Spec file template. # # * Mandatory : NO # * Default : - # # If set CPack will generate a template for USER specified binary # spec file and stop with an error. For example launch CPack like this:: # # cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM # # The user may then use this file in order to hand-craft is own # binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE. # # .. variable:: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE # CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE # # * Mandatory : NO # * Default : - # # May be used to embed a pre (un)installation script in the spec file. # The refered script file(s) will be read and directly # put after the %pre or %preun section # If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for # each component can be overridden with # CPACK_RPM__PRE_INSTALL_SCRIPT_FILE and # CPACK_RPM__PRE_UNINSTALL_SCRIPT_FILE. # One may verify which scriptlet has been included with:: # # rpm -qp --scripts package.rpm # # .. variable:: CPACK_RPM_POST_INSTALL_SCRIPT_FILE # CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE # # * Mandatory : NO # * Default : - # # May be used to embed a post (un)installation script in the spec file. # The refered script file(s) will be read and directly # put after the %post or %postun section. # If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for # each component can be overridden with # CPACK_RPM__POST_INSTALL_SCRIPT_FILE and # CPACK_RPM__POST_UNINSTALL_SCRIPT_FILE. # One may verify which scriptlet has been included with:: # # rpm -qp --scripts package.rpm # # .. variable:: CPACK_RPM_USER_FILELIST # CPACK_RPM__USER_FILELIST # # * Mandatory : NO # * Default : - # # May be used to explicitly specify %() file line # in the spec file. Like %config(noreplace) or any other directive # that be found in the %files section. Since CPackRPM is generating # the list of files (and directories) the user specified files of # the CPACK_RPM__USER_FILELIST list will be removed from # the generated list. # # .. variable:: CPACK_RPM_CHANGELOG_FILE # # RPM changelog file. # # * Mandatory : NO # * Default : - # # May be used to embed a changelog in the spec file. # The refered file will be read and directly put after the %changelog # section. # # .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST # # list of path to be excluded. # # * Mandatory : NO # * Default : /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include # # May be used to exclude path (directories or files) from the auto-generated # list of paths discovered by CPack RPM. The defaut value contains a # reasonable set of values if the variable is not defined by the user. If the # variable is defined by the user then CPackRPM will NOT any of the default # path. If you want to add some path to the default list then you can use # CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION variable. # # .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION # # additional list of path to be excluded. # # * Mandatory : NO # * Default : - # # May be used to add more exclude path (directories or files) from the initial # default list of excluded paths. See CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST. # # .. variable:: CPACK_RPM_RELOCATION_PATHS # # * Mandatory : NO # * Default : - # # May be used to specify more than one relocation path per relocatable RPM. # Variable contains a list of relocation paths that if relative are prefixed # by the value of CPACK_RPM__PACKAGE_PREFIX or by the value of # CPACK_PACKAGING_INSTALL_PREFIX if the component version is not provided. # Variable is not component based as its content can be used to set a different # path prefix for e.g. binary dir and documentation dir at the same time. # Only prefixes that are required by a certain component are added to that # component - component must contain at least one file/directory/symbolic link # with CPACK_RPM_RELOCATION_PATHS prefix for a certain relocation path # to be added. Package will not contain any relocation paths if there are no # files/directories/symbolic links on any of the provided prefix locations. # Packages that either do not contain any relocation paths or contain # files/directories/symbolic links that are outside relocation paths print # out an AUTHOR_WARNING that RPM will be partially relocatable. # # .. variable:: CPACK_RPM__PACKAGE_PREFIX # # * Mandatory : NO # * Default : CPACK_PACKAGING_INSTALL_PREFIX # # May be used to set per component CPACK_PACKAGING_INSTALL_PREFIX for # relocatable RPM packages. # # .. variable:: CPACK_RPM_NO_INSTALL_PREFIX_RELOCATION # CPACK_RPM_NO__INSTALL_PREFIX_RELOCATION # # * Mandatory : NO # * Default : CPACK_PACKAGING_INSTALL_PREFIX or CPACK_RPM__PACKAGE_PREFIX # are treated as one of relocation paths # # May be used to remove CPACK_PACKAGING_INSTALL_PREFIX and CPACK_RPM__PACKAGE_PREFIX # from relocatable RPM prefix paths. #============================================================================= # Copyright 2007-2009 Kitware, Inc. # # Distributed under the OSI-approved BSD License (the "License"); # see accompanying file Copyright.txt for details. # # This software is distributed WITHOUT ANY WARRANTY; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the License for more information. #============================================================================= # (To distribute this file outside of CMake, substitute the full # License text for the above reference.) # Author: Eric Noulard with the help of Alexander Neundorf. function(cpack_rpm_prepare_relocation_paths) # set appropriate prefix, remove possible trailing slash and convert backslashes to slashes if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX) file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX}" PATH_PREFIX) else() file(TO_CMAKE_PATH "${CPACK_PACKAGING_INSTALL_PREFIX}" PATH_PREFIX) endif() set(RPM_RELOCATION_PATHS "${CPACK_RPM_RELOCATION_PATHS}") list(REMOVE_DUPLICATES RPM_RELOCATION_PATHS) # set base path prefix if(EXISTS "${WDIR}/${PATH_PREFIX}") if(NOT CPACK_RPM_NO_INSTALL_PREFIX_RELOCATION AND NOT CPACK_RPM_NO_${CPACK_RPM_PACKAGE_COMPONENT}_INSTALL_PREFIX_RELOCATION) set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PATH_PREFIX}\n") list(APPEND RPM_USED_PACKAGE_PREFIXES "${PATH_PREFIX}") if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: removing '${PATH_PREFIX}' from relocation paths") endif() endif() endif() # set other path prefixes foreach(RELOCATION_PATH ${RPM_RELOCATION_PATHS}) if(IS_ABSOLUTE "${RELOCATION_PATH}") set(PREPARED_RELOCATION_PATH "${RELOCATION_PATH}") else() set(PREPARED_RELOCATION_PATH "${PATH_PREFIX}/${RELOCATION_PATH}") endif() if(EXISTS "${WDIR}/${PREPARED_RELOCATION_PATH}") set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PREPARED_RELOCATION_PATH}\n") list(APPEND RPM_USED_PACKAGE_PREFIXES "${PREPARED_RELOCATION_PATH}") endif() endforeach() # warn about all the paths that are not relocatable cmake_policy(PUSH) # Tell file(GLOB_RECURSE) not to follow directory symlinks # even if the project does not set this policy to NEW. cmake_policy(SET CMP0009 NEW) file(GLOB_RECURSE FILE_PATHS_ "${WDIR}/*") cmake_policy(POP) foreach(TMP_PATH ${FILE_PATHS_}) string(LENGTH "${WDIR}" WDIR_LEN) string(SUBSTRING "${TMP_PATH}" ${WDIR_LEN} -1 TMP_PATH) unset(TMP_PATH_FOUND_) foreach(RELOCATION_PATH ${RPM_USED_PACKAGE_PREFIXES}) file(RELATIVE_PATH REL_PATH_ "${RELOCATION_PATH}" "${TMP_PATH}") string(SUBSTRING "${REL_PATH_}" 0 2 PREFIX_) if(NOT "${PREFIX_}" STREQUAL "..") set(TPM_PATH_FOUND_ TRUE) break() endif() endforeach() if(NOT TPM_PATH_FOUND_) message(AUTHOR_WARNING "CPackRPM:Warning: Path ${TMP_PATH} is not on one of the relocatable paths! Package will be partially relocatable.") endif() endforeach() set(RPM_USED_PACKAGE_PREFIXES "${RPM_USED_PACKAGE_PREFIXES}" PARENT_SCOPE) set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}" PARENT_SCOPE) endfunction() if(CMAKE_BINARY_DIR) message(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.") endif() if(NOT UNIX) message(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.") endif() function(cpack_rpm_generate_package) # rpmbuild is the basic command for building RPM package # it may be a simple (symbolic) link to rpm command. find_program(RPMBUILD_EXECUTABLE rpmbuild) # Check version of the rpmbuild tool this would be easier to # track bugs with users and CPackRPM debug mode. # We may use RPM version in order to check for available version dependent features if(RPMBUILD_EXECUTABLE) execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version OUTPUT_VARIABLE _TMP_VERSION ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE) string(REGEX REPLACE "^.* " "" RPMBUILD_EXECUTABLE_VERSION ${_TMP_VERSION}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>") endif() endif() if(NOT RPMBUILD_EXECUTABLE) message(FATAL_ERROR "RPM package requires rpmbuild executable") endif() # Display lsb_release output if DEBUG mode enable # This will help to diagnose problem with CPackRPM # because we will know on which kind of Linux we are if(CPACK_RPM_PACKAGE_DEBUG) find_program(LSB_RELEASE_EXECUTABLE lsb_release) if(LSB_RELEASE_EXECUTABLE) execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE) string(REGEX REPLACE "\n" ", " LSB_RELEASE_OUTPUT ${_TMP_LSB_RELEASE_OUTPUT}) else () set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!") endif() message("CPackRPM:Debug: LSB_RELEASE = ${LSB_RELEASE_OUTPUT}") endif() # We may use RPM version in the future in order # to shut down warning about space in buildtree # some recent RPM version should support space in different places. # not checked [yet]. if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.") endif() # If rpmbuild is found # we try to discover alien since we may be on non RPM distro like Debian. # In this case we may try to to use more advanced features # like generating RPM directly from DEB using alien. # FIXME feature not finished (yet) find_program(ALIEN_EXECUTABLE alien) if(ALIEN_EXECUTABLE) message(STATUS "alien found, we may be on a Debian based distro.") endif() # Are we packaging components ? if(CPACK_RPM_PACKAGE_COMPONENT) set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}") string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER) else() set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "") endif() set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}") # # Use user-defined RPM specific variables value # or generate reasonable default value from # CPACK_xxx generic values. # The variables comes from the needed (mandatory or not) # values found in the RPM specification file aka ".spec" file. # The variables which may/should be defined are: # # CPACK_RPM_PACKAGE_SUMMARY (mandatory) #Check for component summary first. #If not set, it will use regular package summary logic. if(CPACK_RPM_PACKAGE_COMPONENT) if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY) set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY}) endif() endif() if(NOT CPACK_RPM_PACKAGE_SUMMARY) if(CPACK_PACKAGE_DESCRIPTION_SUMMARY) set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY}) else() # if neither var is defined lets use the name as summary string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) endif() endif() # CPACK_RPM_PACKAGE_NAME (mandatory) if(NOT CPACK_RPM_PACKAGE_NAME) string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME) endif() # CPACK_RPM_PACKAGE_VERSION (mandatory) if(NOT CPACK_RPM_PACKAGE_VERSION) if(NOT CPACK_PACKAGE_VERSION) message(FATAL_ERROR "RPM package requires a package version") endif() set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION}) endif() # Replace '-' in version with '_' # '-' character is an Illegal RPM version character # it is illegal because it is used to separate # RPM "Version" from RPM "Release" string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION}) # CPACK_RPM_PACKAGE_ARCHITECTURE (mandatory) if(NOT CPACK_RPM_PACKAGE_ARCHITECTURE) execute_process(COMMAND uname "-m" OUTPUT_VARIABLE CPACK_RPM_PACKAGE_ARCHITECTURE OUTPUT_STRIP_TRAILING_WHITESPACE) else() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}") endif() endif() set(_CPACK_RPM_PACKAGE_ARCHITECTURE ${CPACK_RPM_PACKAGE_ARCHITECTURE}) #prefer component architecture if(CPACK_RPM_PACKAGE_COMPONENT) if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE) set(_CPACK_RPM_PACKAGE_ARCHITECTURE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: using component build arch = ${_CPACK_RPM_PACKAGE_ARCHITECTURE}") endif() endif() endif() if(${_CPACK_RPM_PACKAGE_ARCHITECTURE} STREQUAL "noarch") set(TMP_RPM_BUILDARCH "Buildarch: ${_CPACK_RPM_PACKAGE_ARCHITECTURE}") else() set(TMP_RPM_BUILDARCH "") endif() # CPACK_RPM_PACKAGE_RELEASE # The RPM release is the numbering of the RPM package ITSELF # this is the version of the PACKAGING and NOT the version # of the CONTENT of the package. # You may well need to generate a new RPM package release # without changing the version of the packaged software. # This is the case when the packaging is buggy (not) the software :=) # If not set, 1 is a good candidate if(NOT CPACK_RPM_PACKAGE_RELEASE) set(CPACK_RPM_PACKAGE_RELEASE 1) endif() # CPACK_RPM_PACKAGE_LICENSE if(NOT CPACK_RPM_PACKAGE_LICENSE) set(CPACK_RPM_PACKAGE_LICENSE "unknown") endif() # CPACK_RPM_PACKAGE_GROUP if(NOT CPACK_RPM_PACKAGE_GROUP) set(CPACK_RPM_PACKAGE_GROUP "unknown") endif() # CPACK_RPM_PACKAGE_VENDOR if(NOT CPACK_RPM_PACKAGE_VENDOR) if(CPACK_PACKAGE_VENDOR) set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}") else() set(CPACK_RPM_PACKAGE_VENDOR "unknown") endif() endif() # CPACK_RPM_PACKAGE_SOURCE # The name of the source tarball in case we generate a source RPM # CPACK_RPM_PACKAGE_DESCRIPTION # The variable content may be either # - explicitly given by the user or # - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE # if it is defined # - set to a default value # #Check for a component description first. #If not set, it will use regular package description logic. if(CPACK_RPM_PACKAGE_COMPONENT) if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION) set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION}) elseif(CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION) set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION}) endif() endif() if(NOT CPACK_RPM_PACKAGE_DESCRIPTION) if(CPACK_PACKAGE_DESCRIPTION_FILE) file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) else () set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") endif () endif () # CPACK_RPM_COMPRESSION_TYPE # if (CPACK_RPM_COMPRESSION_TYPE) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}") endif() if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma") set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio") endif() if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz") set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio") endif() if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2") set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio") endif() if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip") set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio") endif() else() set(CPACK_RPM_COMPRESSION_TYPE_TMP "") endif() if(CPACK_PACKAGE_RELOCATABLE) set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) endif() if(CPACK_RPM_PACKAGE_RELOCATABLE) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Trying to build a relocatable package") endif() if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") else() set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files) cpack_rpm_prepare_relocation_paths() endif() endif() # Check if additional fields for RPM spec header are given # There may be some COMPONENT specific variables as well # If component specific var is not provided we use the global one # for each component foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") endif() if(CPACK_RPM_PACKAGE_COMPONENT) if(DEFINED CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: using CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}") endif() set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}}) else() if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER} not defined") message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") endif() set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) endif() endif() else() if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") endif() set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) endif() endif() # Treat the RPM Spec keyword iff it has been properly defined if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) # Transform NAME --> Name e.g. PROVIDES --> Provides # The Upper-case first letter and lowercase tail is the # appropriate value required in the final RPM spec file. string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL) string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL) string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}") # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file. set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND) if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1) string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}") set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME})") endif() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") endif() set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) endif() endforeach() # CPACK_RPM_SPEC_INSTALL_POST # May be used to define a RPM post intallation script # for example setting it to "/bin/true" may prevent # rpmbuild from stripping binaries. if(CPACK_RPM_SPEC_INSTALL_POST) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}") endif() set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}") endif() # CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM__POST_INSTALL_SCRIPT_FILE) # CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM__POST_UNINSTALL_SCRIPT_FILE) # May be used to embed a post (un)installation script in the spec file. # The refered script file(s) will be read and directly # put after the %post or %postun section if(CPACK_RPM_PACKAGE_COMPONENT) if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE) set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE}) else() set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) endif() if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE) set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE}) else() set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) endif() else() set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) endif() # Handle post-install file if it has been specified if(CPACK_RPM_POST_INSTALL_READ_FILE) if(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) file(READ ${CPACK_RPM_POST_INSTALL_READ_FILE} CPACK_RPM_SPEC_POSTINSTALL) else() message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_READ_FILE}> does not exists - ignoring") endif() else() # reset SPEC var value if no post install file has been specified # (either globally or component-wise) set(CPACK_RPM_SPEC_POSTINSTALL "") endif() # Handle post-uninstall file if it has been specified if(CPACK_RPM_POST_UNINSTALL_READ_FILE) if(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) file(READ ${CPACK_RPM_POST_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_POSTUNINSTALL) else() message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_READ_FILE}> does not exists - ignoring") endif() else() # reset SPEC var value if no post uninstall file has been specified # (either globally or component-wise) set(CPACK_RPM_SPEC_POSTUNINSTALL "") endif() # CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM__PRE_INSTALL_SCRIPT_FILE) # CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM__PRE_UNINSTALL_SCRIPT_FILE) # May be used to embed a pre (un)installation script in the spec file. # The refered script file(s) will be read and directly # put after the %pre or %preun section if(CPACK_RPM_PACKAGE_COMPONENT) if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE) set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE}) else() set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) endif() if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE) set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE}) else() set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) endif() else() set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) endif() # Handle pre-install file if it has been specified if(CPACK_RPM_PRE_INSTALL_READ_FILE) if(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) file(READ ${CPACK_RPM_PRE_INSTALL_READ_FILE} CPACK_RPM_SPEC_PREINSTALL) else() message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_READ_FILE}> does not exists - ignoring") endif() else() # reset SPEC var value if no pre-install file has been specified # (either globally or component-wise) set(CPACK_RPM_SPEC_PREINSTALL "") endif() # Handle pre-uninstall file if it has been specified if(CPACK_RPM_PRE_UNINSTALL_READ_FILE) if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) file(READ ${CPACK_RPM_PRE_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_PREUNINSTALL) else() message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_READ_FILE}> does not exists - ignoring") endif() else() # reset SPEC var value if no pre-uninstall file has been specified # (either globally or component-wise) set(CPACK_RPM_SPEC_PREUNINSTALL "") endif() # CPACK_RPM_CHANGELOG_FILE # May be used to embed a changelog in the spec file. # The refered file will be read and directly put after the %changelog section if(CPACK_RPM_CHANGELOG_FILE) if(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG) else() message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring") endif() else() set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n Generated by CPack RPM (no Changelog file were provided)") endif() # CPACK_RPM_SPEC_MORE_DEFINE # This is a generated spec rpm file spaceholder if(CPACK_RPM_SPEC_MORE_DEFINE) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}") endif() endif() # Now we may create the RPM build tree structure set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}") message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}") # Prepare RPM build tree file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS) #set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${_CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm") set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}") # it seems rpmbuild can't handle spaces in the path # neither escaping (as below) nor putting quotes around the path seem to help #string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") # if we are creating a relocatable package, omit parent directories of # CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list" # which is passed to the find command that generates the content-list if(CPACK_RPM_PACKAGE_RELOCATABLE) # get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are # destinct parent paths of other relocation paths and remove the # final element (so the install-prefix dir itself is not omitted # from the RPM's content-list) list(SORT RPM_USED_PACKAGE_PREFIXES) set(_DISTINCT_PATH "NOT_SET") foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES}) if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*") set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}") string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS ".${_RPM_RELOCATION_PREFIX}") list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1) unset(_TMP_LIST) # Now generate all of the parent dirs of the relocation path foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS}) list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}") string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}") list(FIND _RPM_DIRS_TO_OMIT "${_OMIT_DIR}" _DUPLICATE_FOUND) if(_DUPLICATE_FOUND EQUAL -1) set(_OMIT_DIR "-o -path ${_OMIT_DIR}") separate_arguments(_OMIT_DIR) list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR}) endif() endforeach() endif() endforeach() endif() if (CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") endif() if (NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include) if (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION) message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.") list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}") endif() endif() if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) if (CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}") endif() foreach(_DIR ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}) list(APPEND _RPM_DIRS_TO_OMIT "-o;-path;.${_DIR}") endforeach() endif() if (CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") endif() # Use files tree to construct files command (spec file) # We should not forget to include symlinks (thus -o -type l) # We should include directory as well (thus -type d) # but not the main local dir "." (thus -a -not -name ".") # We must remove the './' due to the local search and escape the # file name by enclosing it between double quotes (thus the sed) # Then we must authorize any man pages extension (adding * at the end) # because rpmbuild may automatically compress those files execute_process(COMMAND find . -type f -o -type l -o (-type d -a -not ( -name "." ${_RPM_DIRS_TO_OMIT} ) ) COMMAND sed s:.*/man.*/.*:&*: COMMAND sed s/\\.\\\(.*\\\)/\"\\1\"/ WORKING_DIRECTORY "${WDIR}" OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES) # In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_ # into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL # otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES # This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling if(CPACK_RPM_PACKAGE_COMPONENT) if(CPACK_ABSOLUTE_DESTINATION_FILES) set(COMPONENT_FILES_TAG "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}") set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}") if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>") message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") endif() endif() else() if(CPACK_ABSOLUTE_DESTINATION_FILES) set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}") endif() endif() # In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM__USER_FILELIST. if(CPACK_RPM_PACKAGE_COMPONENT) if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST) set(CPACK_RPM_USER_FILELIST_INTERNAL ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") endif() else() set(CPACK_RPM_USER_FILELIST_INTERNAL "") endif() else() if(CPACK_RPM_USER_FILELIST) set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}") else() set(CPACK_RPM_USER_FILELIST_INTERNAL "") endif() endif() # Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL # Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL # or CPACK_RPM_INSTALL_FILES, # hence it must be done before these auto-generated lists are processed. if(CPACK_RPM_USER_FILELIST_INTERNAL) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") endif() # Create CMake list from CPACK_RPM_INSTALL_FILES string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") set(CPACK_RPM_USER_INSTALL_FILES "") foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL) string(REGEX REPLACE "%[A-Za-z0-9\(\),-]* " "" F_PATH ${F}) string(REGEX MATCH "%[A-Za-z0-9\(\),-]*" F_PREFIX ${F}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>") endif() if(F_PREFIX) set(F_PREFIX "${F_PREFIX} ") endif() # Rebuild the user list file set(CPACK_RPM_USER_INSTALL_FILES "${CPACK_RPM_USER_INSTALL_FILES}${F_PREFIX}\"${F_PATH}\"\n") # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH}) # ABSOLUTE destination files list may not exists at all if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH}) endif() endforeach() # Rebuild CPACK_RPM_INSTALL_FILES set(CPACK_RPM_INSTALL_FILES "") foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") endforeach() else() set(CPACK_RPM_USER_INSTALL_FILES "") endif() if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}") endif() # Remove trailing space string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) # Transform endline separated - string into CMake List string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") # Remove unecessary quotes string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") # Remove ABSOLUTE install file from INSTALL FILE LIST list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}) # Rebuild INSTALL_FILES set(CPACK_RPM_INSTALL_FILES "") foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") endforeach() # Build ABSOLUTE_INSTALL_FILES set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n") endforeach() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}") message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}") endif() else() # reset vars in order to avoid leakage of value(s) from one component to another set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") endif() # Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir # This is necessary to avoid duplicate files since rpmbuild do # recursion on its own when encountering a pathname which is a directory # which is not flagged as %dir string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") set(CPACK_RPM_INSTALL_FILES "") foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) if(IS_DIRECTORY "${WDIR}/${F}") set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}%dir \"${F}\"\n") else() set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") endif() endforeach() set(CPACK_RPM_INSTALL_FILES_LIST "") # The name of the final spec file to be used by rpmbuild set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.spec") # Print out some debug information if we were asked for that if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}") message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}") message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}") message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}") message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}") message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}") message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}") message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}") message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}") endif() # # USER generated/provided spec file handling. # # We can have a component specific spec file. if(CPACK_RPM_PACKAGE_COMPONENT AND CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE) set(CPACK_RPM_USER_BINARY_SPECFILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE}) endif() # We should generate a USER spec file template: # - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE # - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in "# -*- rpm-spec -*- BuildRoot: \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@ Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ Name: \@CPACK_RPM_PACKAGE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_NAME\@ Version: \@CPACK_RPM_PACKAGE_VERSION\@ Release: \@CPACK_RPM_PACKAGE_RELEASE\@ License: \@CPACK_RPM_PACKAGE_LICENSE\@ Group: \@CPACK_RPM_PACKAGE_GROUP\@ Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ \@TMP_RPM_URL\@ \@TMP_RPM_REQUIRES\@ \@TMP_RPM_REQUIRES_PRE\@ \@TMP_RPM_REQUIRES_POST\@ \@TMP_RPM_REQUIRES_PREUN\@ \@TMP_RPM_REQUIRES_POSTUN\@ \@TMP_RPM_PROVIDES\@ \@TMP_RPM_OBSOLETES\@ \@TMP_RPM_CONFLICTS\@ \@TMP_RPM_AUTOPROV\@ \@TMP_RPM_AUTOREQ\@ \@TMP_RPM_AUTOREQPROV\@ \@TMP_RPM_BUILDARCH\@ \@TMP_RPM_PREFIXES\@ %define _rpmdir \@CPACK_RPM_DIRECTORY\@ %define _rpmfilename \@CPACK_RPM_FILE_NAME\@ %define _unpackaged_files_terminate_build 0 %define _topdir \@CPACK_RPM_DIRECTORY\@ \@TMP_RPM_SPEC_INSTALL_POST\@ \@CPACK_RPM_SPEC_MORE_DEFINE\@ \@CPACK_RPM_COMPRESSION_TYPE_TMP\@ %description \@CPACK_RPM_PACKAGE_DESCRIPTION\@ # This is a shortcutted spec file generated by CMake RPM generator # we skip _install step because CPack does that for us. # We do only save CPack installed tree in _prepr # and then restore it in build. %prep mv $RPM_BUILD_ROOT \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" #p build %install if [ -e $RPM_BUILD_ROOT ]; then rm -rf $RPM_BUILD_ROOT fi mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT %clean %post \@CPACK_RPM_SPEC_POSTINSTALL\@ %postun \@CPACK_RPM_SPEC_POSTUNINSTALL\@ %pre \@CPACK_RPM_SPEC_PREINSTALL\@ %preun \@CPACK_RPM_SPEC_PREUNINSTALL\@ %files %defattr(-,root,root,-) \@CPACK_RPM_INSTALL_FILES\@ \@CPACK_RPM_ABSOLUTE_INSTALL_FILES\@ \@CPACK_RPM_USER_INSTALL_FILES\@ %changelog \@CPACK_RPM_SPEC_CHANGELOG\@ ") # Stop here if we were asked to only generate a template USER spec file # The generated file may then be used as a template by user who wants # to customize their own spec file. if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE) message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in") endif() endif() # After that we may either use a user provided spec file # or generate one using appropriate variables value. if(CPACK_RPM_USER_BINARY_SPECFILE) # User may have specified SPECFILE just use it message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}") # The user provided file is processed for @var replacement configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY) else() # No User specified spec file, will use the generated spec file message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}") # Note the just created file is processed for @var replacement configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY) endif() if(RPMBUILD_EXECUTABLE) # Now call rpmbuild using the SPECFILE execute_process( COMMAND "${RPMBUILD_EXECUTABLE}" -bb --define "_topdir ${CPACK_RPM_DIRECTORY}" --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" --target "${_CPACK_RPM_PACKAGE_ARCHITECTURE}" "${CPACK_RPM_BINARY_SPECFILE}" WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err" OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT) file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err RPMBUILDERR) file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out RPMBUILDOUT) message("CPackRPM:Debug: You may consult rpmbuild logs in: ") message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err") message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") endif() else() if(ALIEN_EXECUTABLE) message(FATAL_ERROR "RPM packaging through alien not done (yet)") endif() endif() endfunction() cpack_rpm_generate_package()