When $<TARGET_PROPERTY> names a build property like COMPILE_DEFINITIONS
but not the usage requirement (INTERFACE_) version of it, the value
should be that used to build the target. It should not be influenced by
a dependent 'head' target like usage requirements are.
Extend the CompileDefinitions test with a case covering the corrected
behavior.
Reviewed-by: Stephen Kelly <steveire@gmail.com>
After calls to ProcessSourceItemCMP0049, check for an empty return
string to detect a failure instead of trusting GetErrorOccuredFlag.
The latter could have been left from a preceding non-fatal error.
Extend the RunCMake.Configure test to cover a case that exposed this
problem.
Since the Sanitizers write out one log file per process, a single
test might have more than one log file. This commit allows ctest
to read all of the log files found for a particual test.
When running CMake under Leak or Address Sanitizer tools, the fake reporting
would get picked up by the outer CMake and reported as leaks and address
failures on the CMake dashboard. This commit makes sure the test only
reports simulated errors when asked to.
These tests cover the OLD behavior of some policies. Set them to
OLD to avoid warnings in the test output. Leave a comment that
explains why this is done here but not recommended in general.
The generator name is "Xcode", not "XCode". Fix this typo. Explicitly
exclude the SubDirSpaces test on Xcode because it does not work. Also
tell the RunCMake.File_Generate test when Xcode is not multi-config so
it can exlcude the OutputConflict case.
Inspired-by: Daniele E. Domenichelli <daniele.domenichelli@iit.it>
Callers of cmTarget::GetLinkImplementationClosure are interested in the
set of targets whose interface properties propagate to the current
target. This excludes targets guarded by $<LINK_ONLY>.
Teach the CompatibleInterface test to cover suppression of interface
compatibility tests with $<LINK_ONLY>. Although this is not recommended
in practice, it is a way of covering the above behavior.
Previously this generator expression was used internally by the
target_link_libraries command to honor private linking requirements of
static libraries in their INTERFACE_LINK_LIBRARIES. Remove the check
that limits $<LINK_ONLY> to this use case to make it available for
project code to use too.
This adds support for memory and leak sanitizers. This is built into
clang and gcc 4.8 and new compilers. It is activated with a -f switch
during compile.
Fix cmTarget::GetSourceFiles to set EvaluateForBuildsystem on the
$<TARGET_PROPERTY:...,INTERFACE_SOURCES> generator expression so that
the $<TARGET_OBJECTS> generator expression is allowed within an
INTERFACE_SOURCES value.
Extend the InterfaceLibrary test to cover this case. Extend the
RunCMake.TargetObjects test to cover failure of $<TARGET_OBJECTS>
when used through $<TARGET_PROPERTY:...,INTERFACE_SOURCES> in a
non-buildsystem context.
This commit adds support for ThreadSanitizer to ctest. ThreadSanitizer
is part of the clang compiler and also gcc 4.8 and later. You have to
compile the code with special flags. Then your code gets the the
ThreadSanitizer ability built into it. To pass options to the
ThreadSanitizer you use an environment variable. This commit teaches
ctest to parse the output from ThreadSanitizer and send it to CDash.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
Use the AddInterfaceEntries helper to avoid duplication. In
TargetPropertyEntry, replace the TargetName string member with a
reference to the full cmLinkImplItem that produced the entry. This is
possible because the cmLinkImplItem is available in AddInterfaceEntries
(it was not available in GetIncludeDirectories). Having the full
cmLinkImplItem allows processIncludeDirectories to implement CMP0027 OLD
behavior without repeating the target name lookup.
Update the RunCMake.CompatibleInterface test DebugProperties case
expected output for the new order of the messages.
Move the subtests that test with local projects into their own test. The reason
is that on slower or crowded machines the test may reach the limit of 25
minutes and therefore fail while it would pass if it was given enough time.
The split is roughly 3:1 with regard to the execution time, with the new
ExternalProjectLocal test being the faster one.
Print the "timeout correctly killed" message using message(STATUS) so
that 'ctest -S' puts it in the same pipe as the rest of the test command
handler output. This ensures it shows up in the same order every time.
Commit v2.8.11~156^2~2 (Expand includes and defines transitively
in 'external' genexes., 2013-02-13) introduced a recursive loop
and a stack overflow during evaluation of a link implementation
which depends on a transitive property, such as
add_library(empty1 ...)
add_library(empty2 ...)
target_link_libraries(empty1
PRIVATE
$<$<STREQUAL:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>,/foo/bar>:empty2>
)
There is no use-case for code like that currently, but it should not
cause a stack overflow.
Avoid the recursion by reporting an error early if a case like this
is found.
A library or executable target that consists only of a reference to an
object library may have no sources to compile or custom commands to run.
The command in the target is the link (or archive) command. Add missing
order-only dependencies to link commands so that target ordering
dependencies are satisfied for it without depending on an intermediate
compilation rule.
Extend the ObjectLibrary test to cover this case.
Co-Author: Brad King <brad.king@kitware.com>
9998d78d Tests: Speed up RunCMake.include_directories test
6eee5d74 Tests: Drop broken and now unused RunCMake_TEST_FILE option
f0f15b93 Tests: Refactor RunCMake.include_directories to drop RunCMake_TEST_FILE
8707814e Tests: Refactor RunCMake.File_Generate to drop RunCMake_TEST_FILE
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Remove unnecessary language initializations. Change the main
CMakeLists.txt project() call to specify NONE. Use enable_language(CXX)
instead of project() in cases that need it to avoid enabling C too.
We cannot use -DRunCMake_TEST=${RunCMake_TEST_FILE} because test cases
use project(${RunCMake_TEST}) and the project name cannot be a path to a
file. The parent and grandparent commits removed the only uses of the
option. Drop it now.
Drop out-of-place coverage of CheckFunctionExists module. The "printf"
symbol is not available on VS 14 without including the <stdio.h> header
to get a definition.
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
f5c18c9c cmTarget: Drop GetDirectLinkLibraries methods
281eb3d8 cmTarget: Improve HaveBuildTreeRPATH implementation
d912220e cmTarget: Lookup targets in LinkInterface and LinkImplementation
edce4351 cmExportFileGenerator: Make SetImportLinkProperty a template
097be413 cmTarget: Add GetUtilityItems to get target ordering dependencies
4dad5fd2 cmTarget: Add cmLinkItem to refer to a target by name and pointer
a2723442 Fix scope of transitive target name lookups
069d60fe cmTarget: Add method to lookup other targets in a target's scope
47ab3ca6 cmTarget: Constify GetLinkImplementationClosure results
9f3ed029 cmTarget: Constify GetTransitivePropertyTargets results
6f0951af cmTarget: Drop 'head' target from GetImportInfo
0dc9e88d cmTarget: Remove 'head' argument from GetLinkImplementation
4ac72455 cmTarget: Drop 'head' argument from GetLinkClosure
bcdb7ff9 cmTarget: Remove 'head' argument from GetLinkerLanguage
bd9b667b cmComputeLinkInformation: Remove 'head' argument
06328dd5 cmTarget: Remove 'head' argument from GetLinkInformation
...
Since commit v2.8.12~436^2 (VS 10: Escape ; as %3B in preprocessor
definitions, 2013-04-11) the Tests/Preprocessor/CMakeLists.txt file no
longer uses the PP_VS1XX values, so stop setting them.
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Create options "MESSAGE_ALWAYS", "MESSAGE_LAZY", and "MESSAGE_NEVER" to
specify whether to print the "Installing" and "Up-to-date" messages.
Extend the RunCMake.file test with cases covering these options.
Teach cmFileCopier::InstallDirectory to detect whether the destination
directory exists. If so, report it as "Up-to-date" instead of
"Installing". This resolves message asymmetry with file installations.
Extend the RunCMake.file and RunCMake.install tests to check the
installation output on both the first and second run.
Suggested-by: J Decker <d3ck0r@gmail.com>
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
In cmTarget, cmGeneratorTarget, and cmGeneratorExpressionEvaluator, fix
target name lookups to occur in the cmMakefile context of the target
that referenced the name, not the current 'head' target. The context
matters for imported targets because they are directory-scoped instead
of globally unique. We already do this in cmComputeLinkDepends and
cmComputeTargetDepends.
Extend the InterfaceLibrary test with an example covering this behavior.
cb67509b VS: Remove unused parameter of WriteTargetConfigurations
790e1677 VS: Fix subproject .sln dependencies on custom targets
5fba44cf VS: Move VS-only API out of cmGlobalGenerator
Each project listed in a .sln must be marked (or not) as part of the
"default build" for each configuration. For targets created by the
add_custom_target() command we add them to the default build if they
are not excluded in some way or if another target depends on them.
In the top-level .sln, a custom target is excluded if it is not
created with the ALL option to add_custom_target. In subdirectory
.sln files, a target may also be excluded if it is not within the
directory and is brought into the solution only due to a dependency
from another target in the solution.
Fix the "IsPartOfDefaultBuild" and "IsDependedOn" methods to check
every target to be included in the .sln for a dependency on the
custom target. Otherwise transitive dependencies through targets
not in the current subdirectory will not be considered.
Extend the SubProject test with a custom target to cover this case.
Reported-by: William Deurwaarder <William.Deurwaarder@tomtom.com>
Reported-by: Dirk Steenpass <dirk.steenpass@gmail.com>
Add the ability to parse the XML output of the Jacoco tool.
Jacoco (www.eclemma.org/jacoco) is a Java coverage tool.
Add and integrate a class for the parser and
include a test which utilizes the new parser.
ddec418a Features: Add compiler version support to WriteCompilerDetectionHeader.
b7029576 Project: Add configurable name for version computation macros.
78acaafe Project: Separate simulated compiler id from version detection.
567af1a5 WCDH: Issue a better message for version compatibility.
86be733f cmGeneratorExpression: Add workaround for Borland compiler
3495ab0a tests: update unused variable test expected output
2a1b2d84 backtrace: Convert to local paths in IssueMessage
a0829205 genex: remove the need for backtraces
efc20569 cmake: remove dummy backtraces for IssueMessage
d46c650d cmMakefile: return a backtrace
Xcode 1.5 does not support multiple configurations. The generator also
adds some sources internally that cause extra OriginDebug output.
Update the expected output to tolerate it.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
Add support for Cobertura coverage files written by Java.
Add a test which uses the report from a Java run of Cobertura to calculate coverage.
In the documentation of CTEST_COVERAGE_COMMAND, give a sample .sh file to merge
the Cobertura .ser files and generate the XML report from the merged file.
If we fail to create the generator named by CMAKE_GENERATOR, exit
with an error message instead of crashing. While at it, fix the
wording of the error message when CMAKE_GENERATOR is not set.
Extend the RunCMake.CommandLine test with cases covering the
"cmake --build" option when the named directory does not provide
a CMakeCache.txt with a valid CMAKE_GENERATOR.
While tracing dependencies of a target, cmTargetTraceDependencies
follows sources by full path to determine if the source is to be
produced by a custom command. Commit 4959f341 (cmSourceFileLocation:
Collapse full path for directory comparisons., 2014-03-27) changed
the storage of target sources to be in the form of a normalized
path instead of an unnormalized path.
The path is followed by looking it up in a mapping via
cmMakefile::GetSourceFileWithOutput to acquire an appropriate
cmSourceFile. The mapping is populated with the OUTPUT components
of add_custom_command invocations, however it is populated with
unnormalized paths. This means that the tracing logic does not
find appropriate cmSourceFiles, and does not generate appropriate
build rules for the generated sources.
Normalize the paths in the OUTPUT components of add_custom_command
to resolve this.
The paths in the DEPENDS component of add_custom_command are also
not normalized, leading to the same problem again. Normalize the
depends paths after generator evaluation and expansion.
Teach set_property and get_property an "INSTALL" property type to be
associated with install-tree file paths. Make the properties available
to CPack for use during packaging. Add a "prop_inst" Sphinx domain
object type for documentation of such properties.
Write to the timeout test log file before sleeping and flush to be sure
it is created. Move the check that the after-sleep line is not written
out to the ctest script. Rename the CheckChild test to TestSleep since
it no longer checks. Do not try to read the log file if it does not
exist.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
The languages used in compiling STATIC libraries need to be propagated
to dependents regardless of the settings of INTERFACE_LINK_LIBRARIES or
CMP0022. They are independent of the libraries in the link interface.
Prior to commit v2.8.12~192^2~2 (Introduce the INTERFACE_LINK_LIBRARIES
property, 2013-06-04) the cmTarget::ComputeLinkInterface code path for
"explicitLibraries" could never be taken for STATIC libraries, so the
logic to propagate languages existed only in the non-explicitLibraries
code path. After that commit, INTERFACE_LINK_LIBRARIES could be set for
STATIC libraries to cause the "explicitLibraries" code path to be taken.
The commit also left the old non-explicitLibraries code path conditional
on CMP0022 not being set to NEW. Thus link language propagation was
left missing from two cases by that commit.
The explicitLibraries code path was fixed to propagate languages by
commit v2.8.12~149^2~1 (cmTarget: Fix iface libraries and languages for
static libraries, 2013-07-26). However, the non-explicitLibraries case
was never taught to propagate languages when CMP0022 is set to NEW. Fix
that now. Factor the logic to propagate link languages out of the link
interface libraries conditions so that it always occurs. Update
Tests/Fortran to set CMP0022 to NEW to test this case (because the test
passes only if link language propagation works).
The languages used in compiling STATIC libraries need to be propagated
to dependents regardless of the settings of INTERFACE_LINK_LIBRARIES or
CMP0022. They are independent of the libraries in the link interface.
Prior to commit v2.8.12~192^2~2 (Introduce the INTERFACE_LINK_LIBRARIES
property, 2013-06-04) the cmTarget::ComputeLinkInterface code path for
"explicitLibraries" could never be taken for STATIC libraries, so the
logic to propagate languages existed only in the non-explicitLibraries
code path. After that commit, INTERFACE_LINK_LIBRARIES could be set for
STATIC libraries to cause the "explicitLibraries" code path to be taken.
The commit also left the old non-explicitLibraries code path conditional
on CMP0022 not being set to NEW. Thus link language propagation was
left missing from two cases by that commit.
The explicitLibraries code path was fixed to propagate languages by
commit v2.8.12~149^2~1 (cmTarget: Fix iface libraries and languages for
static libraries, 2013-07-26). However, the non-explicitLibraries case
was never taught to propagate languages when CMP0022 is set to NEW. Fix
that now. Factor the logic to propagate link languages out of the link
interface libraries conditions so that it always occurs. Update
Tests/Fortran to set CMP0022 to NEW to test this case (because the test
passes only if link language propagation works).
Fix the MUMPS coverage parser:
* Account for tabs after entry points
* Stop double incrementing lines that have explicit calls to the 0 line
* If a line has been previously marked as non executable, but then
contains a count, increment it an extra one to push it back into
the executable code set.
Add a custom routine and corresponding coverage files in the test case.
This file is smaller and has cmcov/mcov files that have data for only
that routine.
Add source file properties to control Xcode file type attributes:
XCODE_EXPLICIT_FILE_TYPE => explicitFileType
XCODE_LAST_KNOWN_FILE_TYPE => lastKnownFileType
Add a RunCMake.XcodeProject test to verify generated project content.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Provide a function to write a portable header to detect compiler
features. Generate a preprocessor #error for unknown compilers
and compiler versions whose features are not yet recorded. This
error condition might be relaxed in the future, but for now it
is useful for verification of expectations.
ba387cb8 Help: Add notes for topic 'package-disable-registry'
be8ae960 Allow the Package Registry to be disabled (#14849)
d09fda5d Tests: Improve FindPackageTest for in-source builds
ac24a1c0 Tests: Improve FindPackageTest exported package version
When a project is packaged for redistribution the local package
registries should not be updated or consulted. They are for developers.
Add variables to disable use of package registries globally:
* CMAKE_EXPORT_NO_PACKAGE_REGISTRY that disables the export(PACKAGE)
command
* CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY that disables the User Package
Registry in all the find_package calls.
* CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY that disables the
System Package Registry in all the find_package calls.
Update documentation and unit tests.
bc9a8bba Makefile: Undef FEATURE_STRING iteration define after use.
eb638c75 Tests: Make CompileFeatures feature list lang-specific.
e2f09aff CMakeConfigurableFile: Remove excess newline.
5109b042 Features: Fix GNU 4.8.1 version test.
6a9fdbeb Test: Parameterize the language in the CompileFeature test.
f5bf9d43 Tests: Make CompileFeature tests use highest standard known.
These policies should be checked at the call site that tries to access
the LOCATION or SOURCES property, not the directory scope containing the
target. Thread the caller context through cmTarget::GetProperty to use
for checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 and RunCMake.CMP0051 tests with
cross-directory cases.
This policy should be checked at the call site that tries to access the
LOCATION property, not the directory scope containing the target.
Thread the caller context through cmTarget::GetProperty to use for
checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 test with a cross-directory case.
Remove the use of check_cxx_source_compiles which is now just getting in
the way.
Blacklist the cxx_alignof feature in the test with GNU 4.7. The test
file compiles, but it is documented as available first in GNU 4.8.
Include tests for:
- @ expansion during normal execution
- various characters in variable names for comparison between the new
and the old parser
- corner cases in the parsers
- correct messages when behavior is different
205215fb cmTarget: Add CXX_STANDARD_REQUIRED to control decay.
1df2116b Features: Decay language flag if requested is not available.
c4f4dac2 Project: Fix exit-on-error with compile feature tests.
5bb7ce72 Project: Use nullary form of main for compile feature tests.
64254e7a Project: Remove extern from static string in feature tests.
0d9c99bf Help: Fix order of help entries.
dc7639bd Tests: Fix name of cache variable.
If creation of the global generator fails, return early with an error
message instead of trying to use the generator and crashing.
Add a CTestTestBadGenerator test to cover this case.
Reported-by: Mathieu Malaterre <malat@debian.org>
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747306
Commit b8af2011 (cmTarget: Fix listing of source files at
configure-time., 2014-04-13) refactored a GetObjectLibrariesCMP0026
method out of GetLanguages. In flight, a conditional use of a target
if available was changed to an assert-available.
This code is only used to read the LOCATION property at configure
time, when the link information is incomplete, and not all targets
are defined, so the assert is inappropriate, even though it can lead
to incorrect information being generated. CMP0026 warns about the
potentially incorrect information anyway.
Old versions of aCC need a special compiler flag to get full C++98 template
support as e.g. CMake itself or the Complex and ComplexOneConfig tests need.
The same versions need a special flag to get a proper C++ library, too.
8d0b1cca Features: FATAL_ERROR on compilers with no recorded features.
447fbb3f Tests: Execute compile features tests unconditionally.
597bb72e Tests: Run RunCMake.target_compile_features unconditionally.
Users of the new target_compile_features command are expected to
check the existence of the CMAKE_CXX_COMPILE_FEATURES variable before
attempting to use it to require features.
When the primary source tree path named by a DATA{} reference does not
exist, produce an AUTHOR_WARNING instead of a FATAL_ERROR. This is
useful when writing a new DATA{} reference to a test reference output
that has not been created yet. This way the developer can run the test,
manually verify the output, and then copy it into place to provide the
reference and eliminate the warning.
If the named source tree path is expected to be a file but exists as a
directory, we still need to produce a FATAL_ERROR.
f21ac16e Replace MATCHES test on numbers with EQUAL test
7eacbaed Replace MATCHES ".+" tests with NOT STREQUAL ""
3a71d34c Use CMAKE_SYSTEM_NAME instead of CMAKE_SYSTEM where sufficient
b0b4b460 Remove .* expressions from beginning and end of MATCHES regexs
5bd48ac5 Replace string(REGEX REPLACE) with string(REPLACE) where possible
2622bc3f Clean up usage of if(... MATCHES regex) followed string(REGEX REPLACE regex)
The matches have already been calculated and can simply be taken from
CMAKE_MATCH_n variables. This avoids multiple compilations of the same or very
similar regular expressions.
Since commit e5da9e51 (cmTarget: Allow any generator expression in
SOURCES property., 2014-03-18), source files are computed by
true evaluation of generator expressions, including TARGET_OBJECTS.
This evaluation requires the presence of cmGeneratorTarget objects
since commit bf98cc25 (Genex: Evaluate TARGET_OBJECTS as a normal
expression., 2014-02-26).
Ensure that we don't attempt to evaluate the TARGET_OBJECTS generator
expression at configure-time, as can happen if CMP0024 or CMP0026
are OLD. Use old-style parsing of the source item to extract
object target names in that case.
Avoid calling GetProperty("SOURCES") to bypass warnings from CMP0051.
Refactor existing logic in GetLanguages which is similar in intent to
the new GetSourceFiles code.
Allow directories in the source tree or build tree only if the
install tree is a subdirectory of the source tree or build tree,
as appropriate.
Re-use the test files in the RunCMake.include_directories test
to run in multiple scenarios. Bump the required CMake version
in the test to 3.0 to ensure that the new policy warnings are
emitted correctly.
Daniele E. Domenichelli
Brad King
Clinton Stimpson
Nils Gladitz
Bill Hoffman
Rolf Eike Beer
Stephen Kelly
Ben Boeckel
Joseph Snyder