Commit Graph

1344 Commits

Author SHA1 Message Date
Brad King 9cf9d2794c Merge topic 'remove_submit_large_output'
929b1c6 Remove the ctest submit larget output test.
2010-08-10 14:38:02 -04:00
Bill Hoffman 929b1c6be3 Remove the ctest submit larget output test.
This test is better covered in CDash now.  It is always failing due
to changes in CDash.  So, it is better removed from CMake.
2010-08-09 13:21:19 -04:00
Todd Gamblin 2cde67a781 Modules: Fix spelling 'To distributed' -> 'To distribute' 2010-08-09 08:48:31 -04:00
Brad King 46718ad10d Merge topic 'fix-CTestTestFailedSubmit-xmlrpc'
fbe67a9 CTestTestFailedSubmit-xmlrpc: Pass with "Submission problem"
2010-08-03 16:15:26 -04:00
Brad King 08c5e475ab Merge topic 'fix-cmake-self-references'
df1e00f Refer to self with CMake_(SOURCE|BINARY)_DIR (#10046)
2010-08-03 16:15:03 -04:00
Brad King e6067ca969 Merge topic 'ctest-git-flexibility'
a7319cf ctest_update: Run 'git submodule' at top level
7bf8dc1 ctest_update: Support ".git file" work trees
65cb72f ctest_update: Abort if Git FETCH_HEAD has no candidates
2010-08-03 16:07:31 -04:00
Modestas Vainius fbe67a9fda CTestTestFailedSubmit-xmlrpc: Pass with "Submission problem"
Pass the test when there is "Submission problem" in the output.  This is
at least applicable to XMLRPC.  Full error message is below:

------
Submission problem: Curl failed to perform HTTP POST request.  curl_easy_perform() says: <url> malformed (-504)
.
  Problems when submitting via XML-RPC
------
2010-07-29 11:39:29 -04:00
Brad King df1e00ff82 Refer to self with CMake_(SOURCE|BINARY)_DIR (#10046)
This is good practice, and is necessary to support building CMake as a
subdirectory of another project.
2010-07-29 11:22:48 -04:00
Brad King 7bf8dc1ac9 ctest_update: Support ".git file" work trees
Commit c3781efb (Support Git upstream branch rewrites, 2010-06-08)
assumed that ".git/FETCH_HEAD" exists inside the source tree.  Fix the
implementation to handle a work tree using a ".git file" to link to its
repository.  Use "git rev-parse --git-dir" to locate the real .git dir.
2010-07-26 11:40:20 -04:00
Brad King e1a4c02bac Merge topic 'resolve/doc-spelling/CPackRPM'
7739d78 Merge CPackRPM changes into doc-spelling
9203e91 Fix spelling errors reported by Lintian.
2010-07-20 16:00:29 -04:00
Brad King f7a0386fc5 Merge topic 'resolve/ctest-file-checksum/remove-CTestTest3'
38c762c Merge 'remove-CTestTest3' into ctest-file-checksum
46df0b4 Activate retry code on any curl submit failure.
8705497 Checksum test should use CMAKE_TESTS_CDASH_SERVER
d0d1cdd Mock checksum failure output for old CDash versions
af5ef0c Testing for CTest checksum
86e81b5 CTest should resubmit in the checksum failed case
d6b7107 Fix subscript out of range crash
082c87e Cross-platform fixes for checksum/retry code
e525649 Checksums on CTest submit files, and retry timed out submissions.
2010-07-13 17:05:33 -04:00
Brad King 38c762c728 Merge 'remove-CTestTest3' into ctest-file-checksum
Conflicts:
	Tests/CMakeLists.txt
2010-07-13 17:01:39 -04:00
Brad King a570ba6df7 Merge topic 'external-project-launcher'
b2634b6 Detect CMake warnings and errors in build output.
012c986 ExternalProject: Add LOG_* options to hide step output
2010-07-13 14:58:11 -04:00
Brad King 7739d786a4 Merge CPackRPM changes into doc-spelling
Conflicts:
	Modules/CPackRPM.cmake
2010-07-13 09:46:52 -04:00
Kai Wasserbäch 9203e9187e Fix spelling errors reported by Lintian.
During a Lintian run on the binary packages of CMake in Debian I was
notified of many spelling mistakes.
2010-07-13 09:41:37 -04:00
David Cole 391acdf199 Add another expected output for the failed submit tests.
The CTestTestFailedSubmit-http test was failing on the
hut11 Experimental dashboards with "Empty reply from
server" due to a localhost settings change.
2010-07-12 17:48:33 -04:00
Zach Mullen 3e52000a07 Fix cycle detection for test dependencies 2010-06-30 10:39:17 -04:00
David Cole a77aa7065e CheckSourceTree test: read UpdateCommand from Update.xml.
If GIT_EXECUTABLE is not passed in, and is not available from
DartConfiguration.tcl or CTestConfiguration.ini, then make one
more last ditch attempt to get it from Update.xml, if there is
an Update.xml. For dashboards that have successfully done a
ctest_update call, there should be an Update.xml in the Testing
subdir of the binary tree. Parse that file for the git executable
recorded in the <UpdateCommand> element.

And make this test pass on those RogueResearch dashboard machines!
2010-06-27 08:29:15 -04:00
Brad King 566bb2d078 Merge branch 'ctest-git-empty-commits' 2010-06-24 10:41:20 -04:00
Zach Mullen 1a4c0c55c7 Parallel CTest hangs if serial test has depends 2010-06-23 17:18:59 -04:00
Brad King bbfe241c6a CTest: Parse empty Git commits correctly
Git's diff-tree format has no '\n'-terminated blank line at the end of
its commit message body block if there are no diff lines.  Instead the
message body is terminated by '\0' and there is no diff section.  Teach
CTest to parse the format in this case.
2010-06-23 09:14:43 -04:00
Zach Mullen 87054972a7 Checksum test should use CMAKE_TESTS_CDASH_SERVER 2010-06-22 11:13:48 -04:00
David Cole 4ee426b057 Look in the ctest ini file for GitCommand.
If GIT_EXECUTABLE is not passed into the test, but the source
tree is a git checkout, then use GitCommand or UpdateCommand
from the ctest ini file to set its value. Presumably, a dashboard
running the test suite had to have set this properly in order
to do the ctest_update step.
2010-06-21 14:46:30 -04:00
Brad King 012c986309 ExternalProject: Add LOG_* options to hide step output
Optionally hide the output of each external project build step by
wrapping its command in a launcher script.  Make output available in log
files instead.  This simplifies the output of external project builds.
2010-06-21 13:25:13 -04:00
Brad King 4f4cce5637 Merge branch 'remove-CTestTest3' 2010-06-15 14:10:50 -04:00
Brad King b4aa834900 Merge branch 'ctest-git-flexibility' 2010-06-15 14:10:41 -04:00
Brad King b6313565e1 Merge branch 'msys-bootstrap-test' 2010-06-15 14:06:28 -04:00
David Cole 199e7f2f33 Remove CTestTest3.
At this point, CTestTest3 causes more problems than it's worth.
It uses CVS to grab a remote (over the network) copy of kwsys
code for testing. This causes some sort of problem nearly every
night on the nightly CMake dashboards. Worse: it causes problems
on different machines on different nights, then the next day, it's
fine again. So: remove this test and monitor the coverage.

If we lose a significant portion of code coverage, I will revert
this commit and re-activate the test. However, if we do not lose
a significant portion of code coverage, I will remove the code
for the test as well as removing it from the CMakeLists.txt file.

Brad King and I discussed this over the last few weeks, and we both
think we have sufficient coverage of all the checkout and update code
in other locally (non-network) based tests.

On the other hand, even if we do take a mild hit on coverage temporarily,
it should be relatively easy to increase our coverage again by adding
bits to those other locally based tests.
2010-06-13 11:02:27 -04:00
Brad King 5e102d5e01 Enable BootstrapTest on MSYS
The bootstrap script works under MSYS, so test it.  Use a launcher batch
file since 'ctest --build-and-test' is a Windows program and will not
honor the shebang line in the script.
2010-06-11 14:30:44 -04:00
Zach Mullen af5ef0c969 Testing for CTest checksum 2010-06-10 12:25:49 -04:00
Brad King 376fb31d1a Run CTest.NoNewline test using built CMake
Even though this test is checking that the ctest running it can handle
test output without newlines we should run the just-built CMake binary.
This allows the MemCheck test mode to check the correct CMake.
2010-06-10 08:24:27 -04:00
Brad King c3781efb28 ctest_update: Support Git upstream branch rewrites
Use 'git fetch' followed by 'git reset' to update the source tree.  This
is better than 'git pull' because it can handle a rewritten upstream
branch and does not leave local modifications.  After fetch, parse
FETCH_HEAD to find the merge head that 'git pull' would choose to track
the upstream branch.  Then reset to the selected head.

In the normal fast-forward case the behavior remains unchanged.
However, now local modifications and commits will be erased, and
upstream rewrites are handled smoothly.  This ensures that the upstream
branch is tested as expected.
2010-06-08 16:50:17 -04:00
Brad King 2eae651acc ctest_update: Support custom Git update command
Define CTest configuration variable CTEST_GIT_UPDATE_CUSTOM to set a
custom command line for updating Git-managed source trees.
2010-06-08 16:12:28 -04:00
Brad King 11bdc2b1a1 Generalize CTest.Update* test dashboard script helpers
Teach (create|run)_dashboard_script macros to treat the argument as the
name of a build tree.  Append '.cmake' to generate the dashboard script
name.  This allows future re-use of the macros for multiple test
scripts.
2010-06-08 15:58:39 -04:00
Brad King 6cf1ccd632 Merge branch 'per-config-link-flags' 2010-06-07 14:36:28 -04:00
Brad King 69292eacfa Merge branch 'fix-large-output-test' 2010-06-07 14:33:57 -04:00
Brad King 9ed98d8802 Merge branch 'update_release_scripts' 2010-06-07 14:29:37 -04:00
Brad King d868ec9406 Merge branch 'add-git-to-CheckSourceTreeTest' 2010-06-07 14:28:45 -04:00
Brad King 0d07e4379e Merge branch 'improve-file-download'
Conflicts:
	Modules/ExternalProject.cmake
2010-06-07 14:26:24 -04:00
Brad King a03e85f13c Merge branch 'add-git-to-ExternalProject'
Conflicts:
	Modules/ExternalProject.cmake
2010-06-07 14:23:45 -04:00
David Cole f6909a69ec Use the long test timeout value for SubmitLargeOutput.
Hopefully this will be a large enough value to get the
large output test to pass on the still exceedingly slow
dash19.
2010-06-03 17:47:48 -04:00
David Cole 29383b4b85 Add FindGit module.
Use it from ExternalProject and the ExternalProject test's
CMakeLists file rather than having duplicate find_program calls.
Add logic so that we do not try to use *.cmd variants of git
programs when using the MSYS Makefiles generator. Should fix
the last remaining dashboard issue with the new ExternalProject
git support additions.

Also, correct minor problem regarding placement of the local git
repo during test execution. On clean builds, it was being placed
incorrectly because of the ../.. relative reference. Use an absolute
path to place the local git repo in the proper directory, and only
use the relative reference when referring to it.
2010-06-03 17:30:07 -04:00
David Cole d569b48b7a Use relative path for git repo reference.
So it will work with git_EXECUTABLE='C:\cygwin\bin\git.exe' in a
non-cygwin-based build.
2010-06-03 15:59:36 -04:00
Zach Mullen e525649a4e Checksums on CTest submit files, and retry timed out submissions. 2010-06-03 10:34:34 -04:00
Brad King c8b13ecc38 Intel-specific workaround for LinkFlags tests
The Intel C compiler for Linux does not seem to reject any bad flags or
object files on its link lines.  Work around the problem by using a
preprocessor #error directive to ensure that BADFLAG appears in the
build output.  This does not really achieve the purpose of the tests but
it allows them to pass.
2010-06-03 09:47:23 -04:00
David Cole e73ad22e38 Fix ExternalProject test failures on dashboards.
Double quote executable names that may have spaces in them.
Do not run the new git portions of the test on machines that
have git < version 1.6.5 on them.
2010-06-02 18:05:41 -04:00
David Cole 670e16af2d Add git support to ExternalProject.
Requires at least version 1.6.5 of a git client for
git submodule update --recursive use.
2010-06-02 16:28:04 -04:00
Brad King a9b24af25c Borland-specific bad flag for LinkFlags tests
The Borland librarian actually creates a BADFLAG.obj when the object is
missing the first time!  This causes later tests to not reject it.
Instead use a Borland-specific variation on the flag.
2010-06-02 08:16:06 -04:00
Brad King 6a009280fd Better "bad" flag in LinkFlags test
The Intel C Compiler for Linux ignores _BADFLAG_ when linking!  Use a
flag that looks like a missing object file to ensure its rejection.
2010-06-01 17:46:58 -04:00
David Cole 2deba1b911 Add .zip and .tar.bz2 extraction to ExternalProject.
Add archives of these file types and add to the test
cases covered in the ExternalProject test.

Also add an "Example" directory in the Tests/ExternalProject
directory containing the canonical simplest example of
ExternalProject usage.
2010-05-31 14:30:22 -04:00