Commit Graph

104 Commits

Author SHA1 Message Date
Gregor Jasny ce935ebe50 cmake: Teach --build to honor CMAKE_VERBOSE_MAKEFILE for Ninja
The Ninja build system does not support a in-file verbositiy switch.
Instead teach 'cmake --build' to extract the CMAKE_VERBOSE_MAKEFILE
setting and pass it as an optional '-v' argument to Ninja.  This can
serve as a reasonable fallback.

Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
2015-02-26 09:51:11 -05:00
Brad King aa2ba12164 VS: Use $(ConfigurationName) as CMAKE_CFG_INTDIR in VS 7, 8, 9
This will allow us to use a value other than just the config name
for the project OutputDirectory setting used for $(OutDir).

Also use $(ConfigurationName) instead of $(OutDir) for the link
directory configuration suffix since that is a hard-coded instance of
a use case for CMAKE_CFG_INTDIR.
2015-02-16 11:48:04 -05:00
Geoff Viola bef23e8181 Fix some spelling errors in comments 2014-10-13 10:00:53 -04:00
Brad King b97736a23d VS: Implement CMAKE_GENERATOR_PLATFORM for VS >= 8
For VS generator names that do not specify the platform name, read
CMAKE_GENERATOR_PLATFORM to get it.

Extend the RunCMake.GeneratorPlatform test with a case covering
use of the x64 platform when the test generator is a Visual Studio
generator whose name does not specify a platform.
2014-09-05 15:03:56 -04:00
Brad King 68d4280ac4 VS: Refactor internal default platform name selection
Rename the 'PlatformName' member to 'DefaultPlatformName' and make
sure it is only read through a 'GetPlatformName()' call.  This will
allow non-default names to be chosen later.
2014-09-05 14:02:58 -04:00
Brad King a43f44000d VS: Move internal MasmEnabled member up to VS 7 generator
Move the member from cmGlobalVisualStudio10Generator to
cmGlobalVisualStudio7Generator to make it useful for earlier
versions of VS.  Set the member to true only starting with
cmGlobalVisualStudio8Generator since we will not implement
MASM support for versions less than VS 8.
2014-08-20 10:21:12 -04:00
Brad King f5c0efdbe4 cmGlobalGenerator: Create a non-virtual 'DoGenerate' method
Make the virtual 'Generate' method protected.  Make 'DoGenerate'
the main entry point to generation.  This gives cmGlobalGenerator
a chance to do some early operations before the individual
generator-specific implementations take over.
2014-07-22 15:05:36 -04:00
Brad King 6e176e6d9e VS: Delay platform definitions until system name is known
Move the definition of CMAKE_VS_PLATFORM_NAME and other variables that
are not needed by CMakeDetermineSystem out of the AddPlatformDefinitions
method and into a SetSystemName method.  The latter may later use
CMAKE_SYSTEM_NAME to decide what platform-specific definitions to add.
2014-07-17 16:34:21 -04:00
Brad King cb67509b06 VS: Remove unused parameter of WriteTargetConfigurations
The cmGlobalVisualStudio7Generator::WriteTargetConfigurations
'root' parameter is no longer used, so remove it.
2014-06-13 08:57:34 -04:00
Brad King 790e167718 VS: Fix subproject .sln dependencies on custom targets
Each project listed in a .sln must be marked (or not) as part of the
"default build" for each configuration.  For targets created by the
add_custom_target() command we add them to the default build if they
are not excluded in some way or if another target depends on them.
In the top-level .sln, a custom target is excluded if it is not
created with the ALL option to add_custom_target.  In subdirectory
.sln files, a target may also be excluded if it is not within the
directory and is brought into the solution only due to a dependency
from another target in the solution.

Fix the "IsPartOfDefaultBuild" and "IsDependedOn" methods to check
every target to be included in the .sln for a dependency on the
custom target.  Otherwise transitive dependencies through targets
not in the current subdirectory will not be considered.

Extend the SubProject test with a custom target to cover this case.

Reported-by: William Deurwaarder <William.Deurwaarder@tomtom.com>
Reported-by: Dirk Steenpass <dirk.steenpass@gmail.com>
2014-06-12 11:14:06 -04:00
Brad King 5fba44cf41 VS: Move VS-only API out of cmGlobalGenerator
Move the IsDependedOn method to cmGlobalVisualStudio7Generator
since that is the only caller.
2014-06-12 10:26:35 -04:00
Clinton Stimpson ee8cef8725 Encoding: If configured, write Visual Studio project files as UTF-8. 2014-03-14 08:48:42 -06:00
Ben Boeckel 6557382dcf stringapi: Use strings for program paths 2014-03-08 13:05:38 -05:00
Ben Boeckel 1a1b737c99 stringapi: Use strings for generator names 2014-03-08 13:05:38 -05:00
Ben Boeckel 24b5e93de2 stringapi: Use strings for directories 2014-03-08 13:05:38 -05:00
Ben Boeckel b3bf31a548 stringapi: Miscellaneous char* parameters 2014-03-08 13:05:37 -05:00
Ben Boeckel 84fdc9921c stringapi: Pass configuration names as strings 2014-03-08 13:05:36 -05:00
Ben Boeckel 270eb96df0 strings: Remove cmStdString references
Casts from std::string -> cmStdString were high on the list of things
taking up time. Avoid such implicit casts across function calls by just
using std::string everywhere.

The comment that the symbol name is too long is no longer relevant since
modern debuggers alias the templates anyways and the size is a
non-issue since the underlying methods are generated since it's
inherited.
2014-03-08 13:05:35 -05:00
Ben Boeckel c3833c7da4 stringapi: Use strings for VS project names 2014-03-08 13:05:33 -05:00
Ben Boeckel fabf1fbabb stringapi: Use strings in target name 2014-03-08 13:05:31 -05:00
David Golub a79cbdc068 VS: Teach include_external_msproject about non-C++ projects (#14661)
Teach CMake to guess the project type guid based on the project file
extension.  This allows non-C++ projects like *.vbproj or *.csproj
to be included.
2013-12-20 11:02:11 -05:00
Stephen Kelly ef25ba8d06 Constify handling of target dependencies. 2013-12-11 15:30:11 +01:00
Brad King 0c55729c13 VS: Add CMAKE_VS_(DEVENV|MSBUILD|MSDEV)_COMMAND variables
Since commit 5f5c92b9 (VS: Add internal APIs to find MSBuild,
devenv/VCExpress, and msdev, 2013-11-13) the VS generators have
known how to lookup the locations of their build tools directly.
Expose this information to CMake language code by defining new
variables to hold the paths to these tools.
2013-12-04 11:05:05 -05:00
Brad King 558c74d0ab VS: Switch to internal CMAKE_MAKE_PROGRAM lookup by generators
Drop the "Modules/CMakeVS*FindMake.cmake" files.  Override the
cmGlobalGenerator::FindMakeProgram method for VS generators to use their
internal APIs to locate the build tool.  Set the CMAKE_MAKE_PROGRAM as a
normal variable for use by project code, but do not cache it.  This will
allow CMake and CTest to select the proper tool at build time.
2013-11-18 11:30:50 -05:00
Brad King 5f5c92b9a2 VS: Add internal APIs to find MSBuild, devenv/VCExpress, and msdev
Teach the VS generators to compute the locations of these tools directly
from registry entries.  Add internal APIs to get the locations on demand.
2013-11-18 08:26:24 -05:00
Brad King 8904d1410b cmGlobalGenerator: Cleanup GenerateBuildCommand API
All cmGlobalGenerator::GenerateBuildCommand call sites that need to
produce a string now generate "cmake --build" commands.  The remaining
call sites immediately pass the result to cmSystemTools::RunSingleCommand.
Avoid the intermediate string and argument parsing by directly producing a
vector of strings.  Also drop the ignoreErrors argument because no call
sites remain that use it.
2013-11-18 08:26:21 -05:00
Brad King b8522a8c8a VS: Expose Intel Fortran .vfproj format version to CMake language
Lookup the Intel VS plugin version on demand in the VS global generator,
compute the corresponding .vfproj format version number, and memoize it.
Add it as a CMAKE_VS_INTEL_Fortran_PROJECT_VERSION platform definition.
2013-10-18 09:55:50 -04:00
Patrick Gansterer b02f09d434 VS: Replace ArchitectureId with PlatformName
Since we do not need the information about the target architecture
we can use the PlatformName only to specify the this information.
This also removes setting of the MSVC_*_ARCHITECTURE_ID variable
which is not required, because this variable gets set by the
compiler detection code in CMAKE_DETERMINE_COMPILER_ID_CHECK().
2013-08-05 13:38:26 +02:00
Patrick Gansterer 4b15dc855d VS: Set CMAKE_VS_PLATFORM_NAME for VS7 and VS71 too
Move the code which sets CMAKE_VS_PLATFORM_NAME from
cmGlobalVisualStudio8Generator to cmGlobalVisualStudio7Generator.
2013-08-05 13:38:23 +02:00
Petr Kmoch de8be9ef7d Add projectDir parameter to GenerateBuildCommand
Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
2013-04-12 11:35:35 -04:00
Patrick Gansterer 3a1006e41f VS: Added "Deploy" at project configuration for WindowsCE targets 2012-11-27 08:31:20 -05:00
Brad King d82200df26 Merge topic 'generator-factory'
75ebebc VS: Remove platform specific generator files
8b62080 VS: Remove EnableLanguage from platform-specific generators
5bdf011 VS: Remove GetPlatformName from platform-specific generators
8d42ab4 VS: Fix ArchitectureId of Visual Studio 10 IA64 generator
6f439b3 VS: Remove AddPlatformDefinitions from platform-specific generators
5170a88 Make cmGlobalGenerator::GetDocumentation() a static function
04ff866 Allow a GeneratorFactory handling of more than one generator
984ebc3 Search generator in cmake::ExtraGenerators before in cmake::Generators
30a6950 Add cmGlobalGeneratorFactory::GetGenerators()
e8f8414 Introduce the abstract class cmGlobalGeneratorFactory
2012-11-20 11:48:05 -05:00
Patrick Gansterer 5170a8800f Make cmGlobalGenerator::GetDocumentation() a static function
Making the function static allows us to call it directly,
without creating and removing an instance of the generator.
2012-11-19 12:54:50 -05:00
Patrick Gansterer e8f841473b Introduce the abstract class cmGlobalGeneratorFactory
This new abstract class allows us move some logic from the
cmGlobalGenerator into its own layer in a next step.
2012-11-19 12:54:30 -05:00
Brad King 45d4f81fde Merge topic 'per-config-EXCLUDE_FROM_DEFAULT_BUILD' into vs-global-sections
Conflicts:
	Source/cmGlobalVisualStudio7Generator.h
2012-11-16 09:23:45 -05:00
Petr Kmoch 2c9196207b Implement properties VS_GLOBAL_SECTION_*
Add properties VS_GLOBAL_SECTION_PRE_<name> and
VS_GLOBAL_SECTION_POST_<name>, which can be used to generate custom
GlobalSection-s in the .sln file.
2012-11-16 08:17:11 -05:00
Petr Kmoch d1f8828cc8 Add property EXCLUDE_FROM_DEFAULT_BUILD_<CONFIG>
Allow EXCLUDE_FROM_DEFAULT_BUILD to be specified per configuration.
2012-11-13 09:08:44 -05:00
Patrick Gansterer 2c7a451de0 VS: Cleanup AddPlatformDefinitions() of Visual Studio generators
Move adding of definitions into cmGlobalVisualStudioGenerator to
share code and avoid duplicate architecture string literals.
2012-08-22 15:08:40 -04:00
Leonid Yurchenko 59139031a1 include_external_msproject: Add TYPE, GUID, PLATFORM options (#13120)
These allow one to reference more external VS project file variations.
2012-04-16 10:17:03 -04:00
Brad King 9c0a00d6dd Rename/constify build-time config placeholder lookup
Rename cmGlobalGenerator::GetCMakeCFG{InitDirectory => IntDir} to
have a shorter name without a typo.  Add a 'const' qualifier since
the method is only for lookup and never needs to modify anything.
2012-03-09 15:16:03 -05:00
Nicolas Despres d0b3a7fa48 Fix typo. 2011-10-23 22:15:30 +02:00
Nicolas Despres d3d7e45df2 Remove trailing white-spaces. 2011-10-23 22:15:20 +02:00
Alex Neundorf e78ce44b35 Fix automoc with VS builds: apply patch from Bill
This patch moves the creation of VS GUIDs from the final pass
to AddHelperCommands() and should fix the failing automoc tests
with VS.

Alex
2011-08-18 19:35:41 +02:00
Brad King 2c2eee61c1 Revert "Remove unused parameter "root" in some VS generator methods"
This reverts commit 10f01ae962.
2010-12-20 11:15:55 -05:00
Brad King 10f01ae962 Remove unused parameter "root" in some VS generator methods
The previous commit removed the last use of this parameter from the
implementation of WriteTargetsToSolution.  Remove the parameter.
2010-12-10 14:33:34 -05:00
Brad King 28edb70a9e Merge topic 'vs-project-groups'
e6ac0aa Add FOLDER target property, for IDEs (#3796)
2010-09-08 11:08:05 -04:00
David Cole e6ac0aacf6 Add FOLDER target property, for IDEs (#3796)
This work was started from a patch by Thomas Schiffer.
Thanks, Thomas!

See the newly added documentation of the FOLDER target
property for details.

Also added global properties, USE_FOLDERS and
PREDEFINED_TARGETS_FOLDER. See new docs here, too.

By default, the FOLDER target property is used to organize
targets into folders in IDEs that have support for such
organization.

This commit adds "solution folder" support to the Visual
Studio generators. Currently works with versions 7 through
10.

Also, use the new FOLDER property in the ExternalProject
test and in the CMake project itself.
2010-09-03 13:53:22 -04:00
Brad King 79a88c35f8 Refactor VS <= 7.1 utility-depends workaround
Commit 438a7e2f (Fix utility dependencies for static libraries in VS
generators, 2007-04-04) implemented utility-only dependencies between
linkable targets by introducing an intermediate non-linkable target.
We convert a dependency of the form

  foo -> bar

to the form

  foo -> bar_UTILITY -> bar

to prevent foo from including bar on its link line.  Previously we added
the extra "_UTILITY" targets explicitly among the project targets before
dependency analysis was performed.  Now we generate them separately at
the last moment so that cmGlobalGenerator need not be aware of them.
2010-08-24 18:47:56 -04:00
Brad King bc43b0f2a4 Do not link library dependencies in VS solutions
In VS 8 and greater this commit implements

  add_dependencies(myexe mylib) # depend without linking

by adding the

  LinkLibraryDependencies="false"

option to project files.  Previously the above code would cause myexe to
link to mylib in VS 8 and greater.  This option prevents dependencies
specified only in the solution from being linked.  We already specify
the real link library dependencies in the project files, and any project
depending on this to link would not have worked in Makefile generators.

We were already avoiding this problem in VS 7.1 and below by inserting
intermediate mylib_UTILITY targets.  It was more important for those
versions because if a static library depended on another library the
librarian would copy the dependees into the depender!  This is no longer
the case with VS 8 and above so we do not need that workaround.

See issue #9732.
2009-10-20 16:38:37 -04:00
Brad King 7766473d3e Avoid duplicate ZERO_CHECK in VS solutions
The commit "Avoid non-root copies of root-only targets" moved the check
for root-only targets into cmGlobalGenerator::GetTargetSets to avoid
adding multiple ALL_BUILD targets to the "original" target set.  This
approach did not work for ZERO_CHECK targets though because those are
pulled in by dependency analysis.

Instead we eliminate duplicate ZERO_CHECK targets altogether and refer
to a single one from all solution files.  This cleans up VS 10 project
file references to ZERO_CHECK targets anyway.
2009-10-19 10:47:34 -04:00