Commit Graph

200 Commits

Author SHA1 Message Date
Brad King de8e534b41 Ninja: Limit custom command side-effects to build folder
Revert commit 7243c951 (Ninja: Don't limit custom cmd side-effects to
build folder, 2014-06-27) because it causes every custom command
dependency in the source tree to get a phony rule.  For large projects
these rules get too big for Ninja to handle efficiently.  While the
original change addressed a valid concern, it did not seem to occur
regularly in practice because well-behaved projects generate their
side-effects only in the build tree.  Until we support explicit
specification of side-effects (CMake issue #14963), we will have to use
this as a middle-ground.
2014-10-08 08:50:15 -04:00
Nils Gladitz 71da30cae0 Ninja: Fix variable duplication in RSP rules
Stream clear() resets stream state but does not actually clear its content.
2014-10-06 22:29:09 +02:00
Sylvain Joubert 9f32a2411b Ninja: Use 'console' pool for CMake re-run if possible (#14915)
The pre-defined 'console' pool is a non-buffered pool that runs with a
depth of 1.  CMake re-run cannot be run concurrently and it will
eventually output something.  A non-buffered pool allows to get it as
soon as possible

Also, generate the minimal required version of Ninja in the build file.
2014-10-03 08:48:47 -04:00
Sylvain Joubert 6120fca8e2 Ninja: Prevent compilers to be silently modified
Unlike with Unix Makefiles generator modifying compiler paths was not
protected with Ninja generator.  It was possible to modify them in the
cache without the expected effect on the generated solution.  Also
activate corresponding tests with Ninja.
2014-09-22 08:44:39 -04:00
Adam Strzelecki 7243c95129 Ninja: Don't limit custom cmd side-effects to build folder (#14972)
Actually custom command can write wherever it wants to, such as temporary
folder or source folder, possibly violating rules that only build folder should
be affected. Therefore we should consider custom command dependency at any path
as possible side effect adding phony rule.

We avoid adding phony rules for regular source files (since the paraent
commit) so we no longer need the in-build-tree test to avoid them.
2014-06-30 09:33:37 -04:00
Adam Strzelecki a33cf6d088 Ninja: Consider only custom commands deps as side-effects (#14972)
Since commit v2.8.12~248^2 (Ninja: Custom Command file depends don't
need to exist before building, 2013-06-07) all explicit dependencies
inside build folder were considered as possible build command
side-effects and phony rules were produced for them in case they don't
exist when starting to build. This is unnecessary since regular compile
inputs need to exist or cmake will fail.  Moreover the exception for
sources having GENERATED property that can be missing is already handled
by WriteAssumedSourceDependencies.

This fixes unwanted phony rules for all regular source files when doing
in-source build, causing Ninja not complain when such files gets missing,
i.e. during development. Also this reduces number of rules in ninja.build.

Now only custom command dependencies are considered as possible side-effects.
2014-06-30 09:33:37 -04:00
Brad King 0b028c6f0a Merge topic 'ninja-avoid-double-phony'
04377f1b Ninja: Remove CMake includes from explicit depends (#14972)
2014-06-16 08:54:46 -04:00
Adam Strzelecki 04377f1b31 Ninja: Remove CMake includes from explicit depends (#14972)
It may happen that CMake include is an explicit dependency for some command,
while all CMake includes are set phony in WriteTargetRebuildManifest, this may
lead to duplicate phony generate rules which causes ninja warnings.

We need to remove implicit CMake includes in WriteUnknownExplicitDependencies.

This fixes FindCUDA ninja warnings.
2014-06-16 08:51:38 -04:00
Ben Boeckel 01b79c6385 ninja: Don't use a stringstream to build an argument list
Streams are expensive to construct (looks like some locale-related
stuff), so use strings instead.
2014-05-02 13:22:19 -04:00
Stephen Kelly d83ef53a12 Rename local 'dir_max' variables to 'dir'
The code is not computing the maximum length directory, as is the
case in cmLocalVisualStudioGenerator::ComputeLongestObjectDirectory.
2014-03-17 15:27:01 +01:00
Stephen Kelly 6c9dd0ec7b cmGlobalGenerator: Make ComputeTargetObjects non-virtual
Implement it in terms of the ComputeObjectFilenames virtual method
on the local generators.

Remove the reimplementation from the global generators which are
now all functionally identical.
2014-03-15 09:30:24 +01:00
Stephen Kelly f6da044080 cmLocalGenerator: Add ComputeObjectFilenames interface.
Implement it in the local generators and use it in the global
generators.
2014-03-13 15:28:02 +01:00
Stephen Kelly 9ad804ac7b cmGeneratorTarget: Constify cmSourceFile* in containers.
Some of them will be used with other APIs which require value_type
to be cmSourceFile const*.
2014-03-13 15:27:23 +01:00
Stephen Kelly cd43433de5 cmGlobalGenerator: Extract a ComputeTargetObjectDirectory interface.
Make it public for future external calls.
2014-03-13 15:27:23 +01:00
Stephen Kelly 21c573f682 Remove some c_str() calls.
Use the clang RemoveCStrCalls tool to automatically migrate the
code. This was only run on linux, so does not have any positive or
negative effect on other platforms.
2014-03-11 15:03:50 +01:00
Ben Boeckel 6557382dcf stringapi: Use strings for program paths 2014-03-08 13:05:38 -05:00
Ben Boeckel 24b5e93de2 stringapi: Use strings for directories 2014-03-08 13:05:38 -05:00
Ben Boeckel 84fdc9921c stringapi: Pass configuration names as strings 2014-03-08 13:05:36 -05:00
Ben Boeckel 270eb96df0 strings: Remove cmStdString references
Casts from std::string -> cmStdString were high on the list of things
taking up time. Avoid such implicit casts across function calls by just
using std::string everywhere.

The comment that the symbol name is too long is no longer relevant since
modern debuggers alias the templates anyways and the size is a
non-issue since the underlying methods are generated since it's
inherited.
2014-03-08 13:05:35 -05:00
Ben Boeckel c3833c7da4 stringapi: Use strings for VS project names 2014-03-08 13:05:33 -05:00
Ben Boeckel fabf1fbabb stringapi: Use strings in target name 2014-03-08 13:05:31 -05:00
Brad King 2c426bfb2d Ninja: Normalize paths of CMake re-run rule dependencies
Send all implicit dependencies through ConvertToNinjaPath.
Add CMakeCache.txt before uniquifying the list.
2014-01-21 14:29:55 -05:00
Brad King 9465242d01 Merge topic 'ninja_fix_rerun'
20e595ab Revert "Ninja: Track configured files so we can regenerate them."
2014-01-16 09:24:15 -05:00
Brad King ce362f27d6 Merge topic 'revert-ninja_fix_rerun'
79859689 Revert "Ninja: Avoid re-running CMake on next build after regeneration"
2014-01-16 09:24:13 -05:00
Brad King 20e595aba8 Revert "Ninja: Track configured files so we can regenerate them."
Revert commit 4a6397a7 (Ninja: Track configured files so we can
regenerate them, 2013-06-17).  The files reported by the method
cmMakefile::GetOutputFiles() must cause CMake to re-run only if they are
missing and without considering a timestamp.  This is not the meaning of
the implicit dependencies field so Ninja re-runs CMake too often.

Another solution will have to be found to the original problem.
2014-01-15 16:37:25 -05:00
Brad King 7985968900 Revert "Ninja: Avoid re-running CMake on next build after regeneration"
Revert commit 6fac24d7 (Ninja: Avoid re-running CMake on next build
after regeneration, 2014-01-09).  The files reported by the method
cmMakefile::GetOutputFiles() must cause CMake to re-run only if they are
missing and without considering a timestamp.  Therefore they cannot be
listed as outputs of the re-run rule or Ninja will re-run CMake every
time because the timestamp of configure_file outputs does not change.

Another solution will have to be found to the original problem.
2014-01-15 16:33:22 -05:00
Brad King 020006f936 Merge topic 'ninja_fix_rerun'
6fac24d7 Ninja: Avoid re-running CMake on next build after regeneration
2014-01-13 10:23:23 -05:00
Robert Maynard 6fac24d750 Ninja: Avoid re-running CMake on next build after regeneration
In commit 4a6397a7 (Ninja: Track configured files so we can regenerate
them, 2013-06-17) we accidentally started listing files generated by
CMake as inputs to the configuration process instead of outputs from it.
Move the list of files generated by CMake to the regeneration rule
outputs section and tell Ninja to restat after running it.
2014-01-13 10:09:48 -05:00
Stephen Kelly 38de54cf6f cmGeneratorTarget: Add methods to access source file groups.
These methods and others will be able to get a config parameter
later to implement the INTERFACE_SOURCES feature.
2014-01-09 19:38:07 +01:00
Stephen Kelly ef25ba8d06 Constify handling of target dependencies. 2013-12-11 15:30:11 +01:00
Brad King 123a0608df Teach GenerateBuildCommand to find its own make program
Add a cmGlobalGenerator::SelectMakeProgram method to select a
caller-provided make program, the CMAKE_MAKE_PROGRAM cache entry, or a
generator-provided default.  Call it from all implementations of the
GenerateBuildCommand method with the corresponding generator's default,
if any.
2013-11-18 11:30:48 -05:00
Brad King 8904d1410b cmGlobalGenerator: Cleanup GenerateBuildCommand API
All cmGlobalGenerator::GenerateBuildCommand call sites that need to
produce a string now generate "cmake --build" commands.  The remaining
call sites immediately pass the result to cmSystemTools::RunSingleCommand.
Avoid the intermediate string and argument parsing by directly producing a
vector of strings.  Also drop the ignoreErrors argument because no call
sites remain that use it.
2013-11-18 08:26:21 -05:00
Brad King 684063c036 Refactor tool selection for edit_cache (#14544)
Refactor edit_cache tool selection to ask each global generator for its
preference.  Teach the Ninja generator to always use cmake-gui because
Ninja by design cannot run interactive terminal dialogs like ccmake.
Teach the Makefile generator to use cmake-gui when also using an "extra"
generator whose IDE has no terminal to run ccmake, and otherwise fall
back to CMAKE_EDIT_COMMAND selection for normal Makefile build systems.
2013-11-12 08:47:19 -05:00
Brad King e378bc6441 Merge topic 'ninja-use-deps'
eeb4aec Ninja: use deps = gcc/msvc feature
2013-10-28 08:38:40 -04:00
Peter Kümmel eeb4aece1c Ninja: use deps = gcc/msvc feature
cmcldeps is now only used for .rc file processing
2013-10-24 19:48:18 +02:00
Brad King 0c39a757da Drop the 'Full' field from cmDocumentationEntry
We need only 'Brief' for usage documentation.  We no longer have builtin
'Full' documentation, which is now in Help/*/*.rst files.
2013-10-16 09:22:37 -04:00
Stephen Kelly fe732264e9 Add the INTERFACE_LIBRARY target type.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.

The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.

An ALIAS target may be created for an INTERFACE library.

At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.

The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
2013-10-07 19:56:31 -04:00
Brad King e6f93dc560 Merge topic 'windows_ninja_duplicate_paths'
a11da72 Ninja: Properly convert all paths to unix style before we do set intersection.
2013-07-24 11:02:33 -04:00
Robert Maynard a11da72e7b Ninja: Properly convert all paths to unix style before we do set intersection.
On windows we had a subset of the paths as unix style and a subset as windows
so when doing the set intersection it resulted in the same file being
found twice.
2013-07-22 10:42:37 -04:00
Clinton Stimpson 603bc5998f OS X: Fix regression handling frameworks for Ninja
Fix a regression created by commit 373faae5 (Refactor how bundles and
frameworks are supported, 2013-05-05).

Since the ninja file isn't aware of how framework symlinks work, we
suppress symlink creation and let cmOSXBundleGenerator handle it.  Also,
use the real name of framework library in build rules as was done
before, instead of the symlink.
2013-07-22 09:40:11 -04:00
Robert Maynard 539356f128 Ninja: Custom Command file depends don't need to exist before building
When converting custom commands for the ninja build system we
need to make sure that any file dependencies that exist in the build
tree are converted to phony targets. This tells ninja that these
files might not exist when starting the build, but could be generated
during the build.

This is done by tracking all dependencies for custom command targets.
After all have been written out we remove all items from the set
that have been seen as a target, custom command output, an alias,
or a file in the source directory. Anything that is left is considered
to be a file that will be generated as a side effect of another
custom command.
2013-07-01 09:01:01 -04:00
Robert Maynard 874e17120d Ninja: GlobalNinjaGenerator WriteBuild and WritePhonyBuild non static
To properly track the usage of dependencies that are generated at
compile time as the side effect of other build steps we need
to make the WriteBuild and WritePhonyBuild commands non static
2013-07-01 08:59:38 -04:00
Robert Maynard 4a6397a70c Ninja: Track configured files so we can regenerate them.
Unlike the Makefile generator the ninja generator did not tack any of
its output files, so if they are deleted the generator would not run.
2013-06-25 08:51:20 -04:00
Petr Kmoch de8be9ef7d Add projectDir parameter to GenerateBuildCommand
Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
2013-04-12 11:35:35 -04:00
Brad King a95968fec9 Merge topic 'ninja-escape-line-breaks'
3b4436a Ninja: escape line breaks in literals
2013-03-13 13:42:00 -04:00
Peter Kümmel 2271ca3496 Ninja: the Ninja generator does not support Fortran yet. 2013-03-10 11:36:57 +01:00
Peter Kümmel 3b4436aa90 Ninja: escape line breaks in literals
BUG: 13591
2013-03-09 12:06:24 +01:00
Peter Kümmel 751f712e1a Ninja: use MinGW generator code in EnableLanguage() 2013-03-09 11:28:45 +01:00
Patrick Gansterer 5170a8800f Make cmGlobalGenerator::GetDocumentation() a static function
Making the function static allows us to call it directly,
without creating and removing an instance of the generator.
2012-11-19 12:54:50 -05:00
Peter Kümmel f1670ab18a Ninja: don't confuse ninja's rsp files with nmake's
Move response files into CMakeFiles/ which makes them different to nmake's.
2012-09-28 12:33:57 +02:00
David Cole a51e1529e7 Merge topic 'ninja-fix-macosx'
1fc8df9 Add missing this->.
7a3ecf5 Fix memory leak in Makefile generator.
9f7dc83 Ninja: also bootstrap ninja files
5d365b2 Ninja: enable ninja support everywhere
d569f3e Ninja: void function can't return a value
52160bf Ninja: enable ninja on Mac so all Mac CDash-builds are tested, cleanup later
56aeac6 Ninja: fixes for bcc
7a6bc9e Ninja: remove 'this' from member initializer list
44ba4cf Ninja: remove warnings
7751966 Ninja: remove 'friend' in ninja code
c3988ee Re-factor OS X content generator start up.
f8e0a51 Re-factor framework directory computation.
f36c7b0 Re-factor Mac OS X content directory computation.
5d885db Re-factor bundle content copying rules generation.
3b2a01e Ninja: Use same echo message as makefiles.
7bb56c5 Re-factor CFBundle generation.
...
2012-07-24 17:03:46 -04:00
Nicolas Despres 10686a17f4 Ninja: Copy resource files in the bundle.
This patch fixes test BundleTest on Darwin.
2012-07-17 14:03:08 +02:00
Peter Kümmel c864103748 Ninja: path is already declared 2012-07-16 17:09:10 +02:00
Peter Kümmel 6547f369e4 Ninja: more searching for windres
search for windres with and without prefix,
and also when only CXX compiler is set.
2012-07-15 19:59:37 +02:00
Peter Kümmel 78588e0343 Ninja: there could be null pointers 2012-07-15 18:48:31 +02:00
Peter Kümmel 0c89c10cfc Ninja: search for windres with prefix 2012-07-15 16:04:26 +02:00
Peter Kümmel 46546809f5 Ninja: windres is also used for cross-compiling
It makes no sense to set windres.exe as default,
especially when we are on Linux or Unix.
2012-07-15 15:19:15 +02:00
Peter Kümmel 3856e6698e Ninja: error on missing rspfile_content 2012-07-10 10:53:25 +02:00
Peter Kümmel 7f647cf5eb Ninja: also write link libraries to rsp file
and enable rspfile support on Linux, needed for commands longer than e.g. 2096152 characters on Ubuntu.
2012-07-10 10:53:24 +02:00
David Cole 2e43272187 Merge topic 'ninja-fixes'
6b31d39 Ninja: don't shadow 'outputs' variable
9b311fb Ninja: add soname test case
e3b1be2 Ninja: Clean all symlink created for libraries.
990f77e Ninja: remove int/size_t warning
2012-07-09 14:23:57 -04:00
David Cole ada7fe248a Merge topic 'ninja-cmdLineLimit'
6332ba5 Ninja: also consider rule command length for rsp file
0c42faf Ninja: also consider variables when checking command line length
2012-07-09 14:23:47 -04:00
David Cole b57dfb5f18 Merge topic 'fix-typo'
b163c45 Ninja: Fix typo: tagets -> targets
2012-07-09 14:22:30 -04:00
David Cole 8947f11d07 Merge topic 'Ninja-absolute-compile-commands'
ca403b8 Construct the full path before escaping it.
f9383a9 STYLE: Fix line length, remove extra blank line
e30d46e Use full paths in compile_commands.json for out of source builds.
2012-07-09 14:21:22 -04:00
Peter Kuemmel 990f77eab3 Ninja: remove int/size_t warning 2012-07-09 14:15:07 -04:00
Peter Kuemmel 6332ba5a58 Ninja: also consider rule command length for rsp file 2012-07-02 10:30:29 +02:00
Peter Kuemmel 0c42faf63a Ninja: also consider variables when checking command line length 2012-07-02 00:01:41 +02:00
David Cole b163c45445 Ninja: Fix typo: tagets -> targets
Thanks to Claus Klein for the report on the mailing list.
2012-06-26 10:35:39 -04:00
David Cole 565744bd3d Merge topic 'ninja-cldeps'
eb410e8 Ninja: disable cldeps for bcc32, it's too old, and ninja would also not build
5ead31d Ninja: try work around for bcc32 bug
1333b57 Ninja: build server fixes
9081e3a remove warning about unused parameter
f430bea Ninja: maybe this fixes the bcc32 build
f2c1288 Ninja: msvc6 for-scoping
44b9bbc Ninja: build with old msvc versions
57156a5 Ninja: build server fixes
f1abdce Ninja: some bytes of the rc files couldn't be piped correctly
2de963d Ninja: don't remove space between command and parameters
50b6f33 Ninja: build cmcldeps with mingw
c05653e Ninja: try to make GetProcessId visible
ab245ff Ninja: but cl supports /nologo ...
bf58e9a Ninja: no /nologo option in old rc.exe
2fb07fc Ninja: Eclipse and KDevelop fixes for ninja
518c065 Ninja: don't pollute build dir with preprocessed rc files
...
2012-06-19 14:42:41 -04:00
Stephen Kelly e30d46e20e Use full paths in compile_commands.json for out of source builds.
Clang tooling requires that paths in the directory and file JSON
fields are relative to the directory field, but clang doesn't normalize
the paths already. The result is that clang doesn't find the relevant
entry for files which begin with ../.
2012-06-19 09:01:28 +02:00
Peter Kuemmel 2fb07fc44c Ninja: Eclipse and KDevelop fixes for ninja
Thx to Claus Klein
2012-06-15 12:14:13 +02:00
Peter Kuemmel 41c28dc35b Ninja: be more accurate when estimating the command line length 2012-06-15 02:00:15 +02:00
Peter Kuemmel f13a6a087e Ninja: undo all the NOSHELL patches 2012-06-15 01:43:08 +02:00
Peter Kuemmel 69bc5131b2 Ninja: remove nop line 2012-06-14 18:16:19 +02:00
Peter Kuemmel f1aa026fb9 Ninja: build with old vc versions 2012-06-14 18:02:43 +02:00
Peter Kuemmel 6546086004 Ninja: don't use shell when cmake is called directly
When linking with cmake and vs_link_* the command line
could be too long for cmd.exe, which needs not to be
called in this case. (was not cached by a test)

Introduce rules which don't use the shell and use this
rule when there are no pre or post step.

For free we get a small speedup, because cmd is then
not called.

Also be more accurate when estimating the
command line length.
2012-06-14 14:22:56 +02:00
Peter Kuemmel 4b43999ca3 Ninja: remove unused CommentStream 2012-06-13 17:23:31 +02:00
Brad King 32313fd0d4 Merge branch 'ninja-rspfile' into no-std-stringstream
Conflicts:
	Source/cmGlobalNinjaGenerator.cxx
	Source/cmLocalNinjaGenerator.cxx
	Source/cmNinjaNormalTargetGenerator.cxx
2012-06-12 15:43:32 -04:00
Brad King 94de982902 Avoid direct use of std::(o|)stringstream (#13272)
Older C++ compilers do not provide a standard std::stringstream.
Use our compatibility interfaces instead.

Also avoid std::stringstream(openmode) signature.  Our approximate
stringstream implementation provided when the standard one is not
available does not support the openmode argument.
2012-06-12 15:40:24 -04:00
Peter Kuemmel ba8d0db217 Ninja: don't pollute the rules file with useless comments 2012-06-10 20:20:29 +02:00
Peter Kuemmel 941afa571c Ninja: allow spaces in source path
And make /showIncude prefix visible for all build rules
2012-06-08 22:59:18 +02:00
Peter Kuemmel 033a687acd Ninja: add wrapper for cl to extract dependencies
cmcldeps wraps cl and adds /showInclude before calling cl.
It parses the output of cl for used headers, drops system
headers and writes them to a GCC like dependency file.

cmcldeps uses ATM ninja code for process handling,
but could be ported later to SystemTools.

TODO: Why needs ninja multiple calls in the BuildDepends test?
2012-06-08 17:42:11 +02:00
Peter Kuemmel e3a1f727f7 Ninja: find mingw's resource compiler 2012-06-06 13:02:30 +02:00
Peter Kuemmel c60557e973 Ninja: don't break because of empty commands 2012-06-06 01:36:34 +02:00
Peter Kuemmel 0266c9bd19 Ninja: check for valid pointer 2012-06-05 23:29:29 +02:00
Peter Kuemmel ad4a768d59 Ninja: add response file support on Windows
When MinGW is used slashes are used for dependencies
because ar.exe can't read rsp files with backslashes.

Many thx to Claus Klein for starting working on this.
2012-06-05 22:39:42 +02:00
Stephen Kelly db839bec7d Make the CMAKE_EXPORT_COMPILE_COMMANDS option work with Ninja. 2012-06-04 23:42:37 +02:00
David Cole 8e9929d527 Merge topic 'ninja-error-failbit'
b94514f Ninja: mark rules/build file streams failed if error occurred (#13067, #13105)
2012-05-17 15:00:01 -04:00
Peter Collingbourne b94514f020 Ninja: mark rules/build file streams failed if error occurred (#13067, #13105)
This causes cmGeneratedFileStream to delete the temporary files,
rather than overwriting the (working) existing files.
2012-05-17 00:00:16 +01:00
Nicolas Despres 92cee7626c Ninja: Add a convenient 'help' target. 2012-05-09 19:08:12 +02:00
Nicolas Despres 3bd41f2eb5 Ninja: Add a convenient 'clean' target.
It has been asked on the mailing list:
http://public.kitware.com/pipermail/cmake-developers/2012-April/003805.html
2012-05-09 19:08:12 +02:00
Brad King 61124de4c0 Build object library targets in Ninja
Treat OBJECT libraries as STATIC libraries but leave out the archive
step.  The object files will be left behind for reference by other
targets later.
2012-03-16 10:18:36 -04:00
Brad King f5b06cda0f Pre-compute object file names before Ninja generation
Implement cmGlobalGenerator::ComputeTargetObjects in the Ninja generator
to pre-compute all the object file names.  Use the results during
generation instead of re-computing it later.
2012-03-16 10:18:35 -04:00
Peter Collingbourne 0643fee2fe Ninja: Shell encode various CMake invocations 2012-02-19 05:57:22 +00:00
Peter Collingbourne cea03e632b Ninja: Backslash rules for Windows
Generally these are only required in build statements, as Ninja wants
to be able to chop paths up.  But it doesn't hurt to also try to use
them in command line arguments.
2012-02-19 04:00:02 +00:00
Peter Collingbourne 9362440a0b Ninja: Identifier encoding rules for ' ' and ':' 2012-02-18 20:33:39 +00:00
Peter Collingbourne 99856d537c Ninja: Partially revert "win fixes: escape back slash/colon, use cd. as cmd.exe nop"
It introduced encoding rules in the wrong place, and broke the
CustomCommand test case.

This reverts commit 7fb2bb3e8b.
2012-02-18 20:33:33 +00:00
Peter Kuemmel 7fb2bb3e8b Ninja: win fixes: escape back slash/colon, use cd. as cmd.exe nop 2012-02-18 08:15:23 +01:00
Peter Collingbourne 5d19e8aa6a Ninja: Appease various compilers 2012-02-05 01:48:08 +00:00
Peter Collingbourne bfe56f6802 Ninja: Remove some default arguments 2012-02-05 01:48:01 +00:00
Peter Collingbourne 6dd410c2b9 Ninja: Add the Ninja generator 2012-02-02 23:40:21 +00:00