The memory checker command can't be quoted at this point, because previously it
has been tested that the given file exists, which will fail if the name is
quoted. The CTestTestMemcheckUnknown test aimed to test this case, has always
failed to do so and serves no useful purpose therefore.
This allows the ctest_build command's TARGET option to name a target
in a subdirectory and still build properly with msbuild.
Add test case covering use of ctest_build() with such a TARGET.
In cmCTestHandlerCommand::InitialPass call InitializeHandler after setting
the CTest "SourceDirectory" and "BuildDirectory" configuration values
instead of before. This makes the values available to InitializeHandler
methods in subclasses, so also drop the duplicate configuration of those
values from cmCTestConfigureCommand::InitializeHandler.
Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
The ctest_configure command already reads the CTEST_CMAKE_GENERATOR
variable to get the value for the cmake -G option. Read new variable
CTEST_CMAKE_GENERATOR_TOOLSET for -T.
The "ctest --build-and-test" mode already has "--build-generator" to
specify the -G option to CMake. Add a "--build-generator-toolset" option
to specify the -T value.
Note it is still possible for CTest to start more than the number of
processes specified by PARALLEL_LEVEL, but this prevents the number of
tests to start from being unbounded because of overflow.
This is for consistency throughout cmake. The cmsys version exists
becaues uses of auto_ptr types as return types does not work with
some implementations in ancient compilers.
995a35f CTest: add a check with a quoted memory checker
de8bffc CTest: add a test for CTEST_CUSTOM_MEMCHECK_IGNORE
d26c9b6 CTest: improve memory checker type detection
fcae1da CTest: add tests that simulate memcheck runs
6187876 CTest: fix pre and post test commands with spaces
95bc8aa CTest: fix usage of memory checker with spaces in path
If the checker was explicitely set with a "TypeCommand" variable (e.g.
ValgrindCommand) then we now just believe that this is valgrind, even if
nothing in the path matches "valgrind". Only when "MemoryCheckCommand" was used
we still scan the path to find out what checker we have.
Hack access to cmCTestVC::Revision on this compiler to avoid errors like
Source/CTest/cmCTestSVN.cxx, line 23: Error: cmCTestSVN::SVNInfo is not accessible from cmCTestSVN::Revision.
Source/CTest/cmCTestSVN.cxx, line 22: Error: cmCTestVC::Revision is not accessible from file level.
If the pre or post memcheck or test commands have spaces in the path these
were never escaped, leading to broken commands. This was not covered in the
test suite so it went unnoticed.
The filename was escaped in cmCTestMemCheckHandler::InitializeMemoryChecking()
and again before it was written to output in
cmCTestRunTest::ComputeArguments().
Once someone uses e.g. a valgrind path with spaces this leads to double escaping
making the memory checker fail completely because of the invalid path.
This call 'svn status' and parse the result to get the list of externals
repositories. The external repositories found are added to the
Repositories list.
- Suppress the URL, Root, Base fields from the cmCTestSVN class
- Update the code to use RootInfo instead
- LoadInfo(), GuessBase(), and a new LoadRevision() functions work on a given SVNInfo
- Use the implementation from the base class for LocalPath(), correct path is built by SVNInfo::BuildLocalPath() instead
The Repository list will contain the SVNInfo of all the repositories
(root and external ones). The RootInfo pointer will point to the
SVNInfo structure of the root repository.
c806b23 CDash now supports lots of files in coverage. So, show all files.
761d931 Do not try to run bullseye coverage if COVFILE env is empty.
5b69ce4 Update test data to match new coverage format.
1b418f1 Change GT.M Coverage Parser global
b0c07a1 Disable bullseye coverage for mumps coverage test.
0a169e6 Remove uncovered files from cache coverage data.
a7abf5e Add ability to specify more than one package directory or coverage directory.
220afca Use <TARGET_FILE> expression to run ctest so it works with Xcode and VS IDE.
62f6bce Use a script to run the test because WORKING_DIRECTORY is not in 2.8.2.
f5c5db0 Fix some warnings and a bug where it went past the length of a vector.
7955e99 Add support for Cache coverage.
a86cd33 Add virutal destructor to silence warning.
319eeb0 Add test for mumps coverage. Also refactor code to prepare for cache coverage.
72210c2 Fix line length.
dd07161 Fix warning about char* instead of const char*.
e6412e0 Add support to ctest for GTM mumps coverage.
The coverage global should be in the local namespace. This means the global
will be ^ZZCOVERAGE instead of ^COVERAGE. Change the parser to look for ^ZZCOVERAGE
instead of the old ^COVERAGE
Replace use of AppendEnv/RestoreEnv pairs with instances of
SaveRestoreEnvironment. Simplify the signature of AppendEnv and use it
in place of similar loops elsewhere. Move the RestoreEnv implementation
inside the SaveRestoreEnvironment destructor which is the only place
left that calls it.
Commit ffbe61bb (make sure english is used for output of gcov, 2008-05-10)
taught ctest_coverage to set LC_ALL=POSIX to get English output from gcov.
Use the more portable value LC_ALL=C and restore the original value when
finished.
Even if there are no lines covered in the file the gcov coverage report still
contains valueable information, the amount of uncovered lines and which exactly
they are. Set 'Covered="true"' for files we have a gcov report for even if they
have no lines covered. Otherwise CDash will neither show the uncovered line
count nor the detailed coverage report for this file.
When CTEST_EXTRA_COVERAGE_GLOB was used to collect otherwise uncovered files
'Covered="true"' was unconditionally set, so this can't be worse here.
Fix the regex meant to match errors of the form:
C:\some\dir\source.cpp(17): catastrophic error: could not open source file "some_header.h"
to make the space between ')' and ':' optional.
COVERAGE_EXTRA_FLAGS is a space separated value of extra flags
that will be passed to gcov when ctest's coverage handler invokes
gcov to do coverage analysis.
Map to CoverageExtraFlags in the CTest ini file. Use default value
of "-l" to match the coverage handler's earlier behavior from ctest
2.8.4 and earlier. The fix for related issue #11717 had added a " -p"
which was the cause of both #12415 and #12490. Here, we revert that
change to the default value, so -p is no longer there by default.
The people that care to add -p may do so in their own build trees
by appending " -p" to the new cache variable COVERAGE_EXTRA_FLAGS.
Previous code was missing some matches in the output. This commit
fixes the regular expressions used for output matching to detect
numbers reported with commas in them, too.
This deterministic ordering makes it easier for a developer
comparing the ctest output of two test runs to see what changed
from run to run.
Thanks to Fraser Hutchison for the patch.
When add_test(NAME) is called without the CONFIGURATIONS argument then
the test is intended to run in any configuration. In multi-config
generators like the VS IDE and Xcode tests created by add_test(NAME) can
only be run when testing a known configuration (otherwise there is no
way to generate the test command line). If no test command line is
known for a particular configuration, or if no configuration is given to
ctest, report the test as not run instead of silently skipping it.
Also fix CMake's own TestsWorkingDirectory test invocation to correct a
previously silent failure exposed by this change.
3e32db7 cmCTestUploadCommand::CheckArgumentKeyword should return false if not FILES
6b6f309 Add the FILES keyword to ctest_upload command
28cdd0a Don't tar/gz ctest_upload() files
fbe4356 Change 'Files' tag to 'Upload' in Upload.xml
350546d Implement ctest_upload command
Some samples of things that got unnoticed by our nightly builds:
$ JAVA_HOME= mvn
Warning: JAVA_HOME environment variable is not set.
...
$ mvn
[INFO] Scanning for projects...
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD FAILURE
...
Several major Linux distributions still do not provide Git >= 1.6.5.0 in
their stable package lists. Prior to commit 1173cc4a (Update Git
submodules with --recursive, 2011-02-22) CTest was able to use older Git
versions but simply silently failed to update submodules recursively.
Instead of failing with older Git versions preserve the status quo and
add a warning in the update log. Users testing projects with recursive
submodules may simply update to a Git new enough to support them.
Using sort results in a possibly-modified sorting
when all elements are "tied" - use stable_sort instead
to preserve the original ordering of tied elements.
To avoid name clashes.
Before this commit, name clashes can occur when invoking gcov on a
project that uses the same file name in different directories. The
--preserve-paths flag ensures all file names have a complete path,
avoiding name clashes.
Since commit e4beefeb (CTest: Do not munge UTF-8 output in XML files,
2009-12-08) we validate UTF-8 encoding of build and test output as it is
written to XML files. However, in cmCTestTestHandler::CleanTestOutput
we still processed test output one byte at a time and did not recognize
multi-byte UTF-8 characters. Presence of such characters caused early
truncation.
Teach CleanTestOutput to truncate test output at the limit but without
cutting it in the middle of a multi-byte encoding. Also, stop avoiding
truncation in the middle of an XML tag like "<MyElement>" because the
'<' and '>' will be properly escaped in the generated XML anyway.
667a90a Fix sentence break in add_test documentation
96309fc Make TestsWorkingDirectory test a C file
a4a5e37 Use iostream to make Borland happy
cfe53cd Fully specify the path to old-signature add_test
017d4e9 Group adding tests with its properties
561cc33 Only test the default cwd with Makefiles
d87bae7 Simplify the _default_cwd derivation
992c74f Use --><-- markers to denote the path
5249551 Flip slashes around on Windows
0a014da Add ctype.h include for toupper()
af12f83 Fix header includes for C++ and Visual Studio
5597aa2 Rename the project to match the test
9bf4165 Add tests for WORKING_DIRECTORY arg to add_test
42de5d0 Add WORKING_DIRECTORY argument to add_test
7679f9f Rename WorkingDirectory test
d95f817 Add the WORKING_DIRECTORY property to tests
Rolf Eike Beer
Andreas Mohr
Petr Kmoch
Brad King
Casey Goodlett
David Cole
Stephen Kelly
Nils Gladitz
Xavier Besseron
Kitware Robot
Bill Hoffman
Joseph Snyder
Alexandru Ciobanu
Yury G. Kudryashov
Nicolas Despres
Johannes Stallkamp
Thomas Jarosch
Johan Björk
Zach Mullen
Marco Craveiro
Chuck Atkins
Clinton Stimpson