A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
3c497f11 Help: Add notes for topic 'ExternalProject_UPDATE_DISCONNECTED'
aba5cec6 ExternalProject: Add unit tests for UPDATE_DISCONNECTED
3f606fa7 ExternalProject: Add UPDATE_DISCONNECTED option
c0b749cf ExternalProject: Always add a command to a step
The CPackComponentsForAll-*, GeneratorExpression, and
TestsWorkingDirectory tests all build binaries that they later
need to run or package for the tested configuration. Tell the
'ctest --build-and-test' call to use the same configuration
for driving the build process.
The evaluation files must be known before cmTargetTraceDependencies
attempts to find them, but we must actually generate the files after
cmTargetTraceDependencies, as that can add to target SOURCES. The
limitation is that the generated output name must not depend on the
SOURCES of a target if the generated file is used by that target.
Mark the output files as GENERATED so that trace dependencies does
not expect them to already exist in the filesystem.
Move the invokation of ForceLinkerLanguage in the Generate logic
to after the generated file names are known. ForceLinkerLanguage
tries to determine the sources of a target (in order to determine
an already-known language) and otherwise fails to get information
about the generated file.
Test that the output of file(GENERATE) can be used as a target source
file and that accessing the target SOURCES in the name of the output
file is an error. Accessing the TARGET_OBJECTS would be a similar
error if it was legal to use that generator expression in this
context. That is not currently possible and is a different error
condition, so test the current error output as a reminder to change
the expected output if that becomes possible in the future. Test
that generated rule files resulting from cmTargetTraceDependencies
appear in the SOURCES generated in the output file.
Since commit v3.1.0-rc1~227^2~1 (De-duplicate shared library targets in
generated link lines, 2014-07-30) we de-duplicate shared library targets
on the link line. However, some toolchains will fail linking if an
executable is linking to a shared library that is not used directly and
a static library that depends on the shared one. The linker may not
keep the reference to the shared library the first time and then the
symbols needed by the static library may not be found.
Fix this by reversing the direction of the for loop that removes the
duplicate shared libraries, in order to ensure that the last occurrence
of the library is left instead of the first one.
Extend Tests/Dependency with a case covering this behavior. Create an
executable that links to a shared library and a static library but only
needs the shared library as a dependency of the static library.
Co-Author: Brad King <brad.king@kitware.com>
c02c747b Tests: Update expected CTestTestFailedSubmit output
a427ed0c curl: Skip sanity check that triggers Clang warning
17b24d55 curl: Disable warnings to avoid changing 3rd party code
4c3bd340 curl: Skip check for inet_pton on Windows
54cb23c6 curl: Restore installation of OpenSSL DLLs
c50f0327 curl: Restore CURL_CA_BUNDLE option
681693c9 curl: Restore CMake-specific zlib selection code
10d80b68 curl: Restore CMake-specific test and install code
19593042 curl: Configure build to work within CMake
cf54aebb curl: Fix curl.h inclusion of curlbuild.h from CMake sources
c17e3207 curl: Use arch-aware CHECK_TYPE_SIZE results
1f7cb7e2 curl: Fix detection of headers with dependencies
b18c9044 curl: Drop inclusion of .rc file for static lib
860f0a2d curl: Select file APIs on Windows
5a3b55ed curl: Do not use 'dl' on HP-UX
59242702 curl: Simplify if() conditions on check result variables
...
b6b37e30 Makefile: Add assembly and preprocessed targets for Fortran
0842b084 Makefile: Refactor checks for lang-specific targets and export compile cmds
1531df2b configure_file: Warn about unknown arguments
4abbb140 Qt4: Fix configure_file call to use COPYONLY, not COPY_ONLY
bd7ba8e2 KWSys: Fix configure_file call to use COPYONLY, not COPY_ONLY
e9282782 Help: Fix configure_file call to use COPYONLY, not COPY_ONLY
Extend the RunCMake.configure_file test with a case covering possible
common typos of the COPYONLY option.
Reported-by: Iosif Neitzke <iosif.neitzke@gmail.com>
609037f4 ExternalProject: Add unit tests for CMAKE_CACHE_DEFAULT_ARGS
98cdb658 ExternalProject: Add CMAKE_CACHE_DEFAULT_ARGS arguments
36cf8a1e Tests/Tutorial: Fix when USE_MYMATH is OFF
This argument allows to set default arguments that are written in the
initial cache file, but that are not forced, and therefore allows the
user to change these values later (CMAKE_ARGS and CMAKE_CACHE_ARGS
always overwrite the values).
Also add some documentation to explain the differences between these 3
arguments.
Extend ExternalProjectLocal test to cover CMAKE_CACHE_DEFAULT_ARGS.
Unit tests for the square root of "-25" currently fail when USE_MYMATH
is disabled. The "mysqrt" method in the tutorials, returns "0" for a
negative value, while "sqrt" returns "NaN", and therefore the output is
not accepted by the test.
This patch checks if the number is negative and eventually returns "0"
before calling "sqrt" or "mysqrt" to fix this issue.
Printing a NaN might cause issues with the string catched by the tests
on some platform. Therefore assume that "0" is correct and "fix" the
USE_MYMATH=OFF version by checking if the number is negative and
eventually returning "0" before calling "sqrt" or "mysqrt".
Some compilers (e.g. MSVC) can have a different encoding than the build tool.
Changing the test to not use a full include path written to a header file by cmake.
6e1c359f QtAutogen: Regenerate qrc files if their input changes (#15074)
a2995318 QtAutogen: Expand rccfiles into a vector early in the autogen process.
506151af QtAutogen: Extract a GetRccExecutable method.
d1b62185 Merge branch 'parent-scope-tests' into variable-pull-failure
5f414cef Revert "cmDefinitions: Don't store parent lookups"
e0c0b1ac test: add a test for PARENT_SCOPE with multiple scopes
064c415d test: add test for PARENT_SCOPE behavior
Get dependencies from the output of ``rcc --list`` if using
Qt 5. Otherwise process the file in the same way as the
qt4_add_resources macro.
This does not work for RCC files which are generated.
The cmake_autogen build step is implemented as a PRE_BUILD step
of the target currently if possible, rather than a standalone
custom target. This is to keep the number of (synthesized)
custom targets that appear in the UI low, but in some cases
it is necessary to fall back to a full custom target.
Fall back to a full custom target for the VS builds if autorcc
is used.
* parent-scope-tests:
test: add a test for PARENT_SCOPE with multiple scopes
test: add test for PARENT_SCOPE behavior
Conflicts:
Tests/RunCMake/set/RunCMakeTest.cmake
Enable per-component description and summary setting through
CPACK_RPM_<component>_PACKAGE_DESCRIPTION,
CPACK_COMPONENT_<compName>_DESCRIPTION and
CPACK_RPM_<component>_PACKAGE_SUMMARY variables.
Extend the CPackComponentsForAll test to cover these.
In the case of:
-DCACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG:BOOL=TRUE
the variable is parsed out as:
CACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG
because the parser allows '=' in the variable name. Disallow such a name
on the command line.
Brad King
Peter Collingbourne
Stephen Kelly
Daniele E. Domenichelli
Tim Gallagher
Rolf Eike Beer
Joseph Snyder
Pascal Bach
Clinton Stimpson
Ben Boeckel
Domen Vrankar