489b1c23 Windows: Use response files to specify link libraries for GNU tools
745caae6 Makefile: Rename linker response file boolean to be more specific
5e8e4d0f cmLocalGenerator: Add response file option to OutputLinkLibraries
b9aa5041 cmLocalGenerator: Simplify GetIncludeFlags output formatting
971653b7 cmLocalGenerator: Add format option to ConvertToLinkReference
0c0ef9e7 cmLocalGenerator: Add format option to ConvertToIncludeReference
02bebd60 cmLocalGenerator: Add format option to ConvertToOutputForExisting
c8751709 Makefile: Factor out some duplicate link libraries generation
Work around the command-line-length limit by using an @linklibs.rsp
response file to pass the flags for link libraries. This allows
very long lists of libraries to be used in addition to the existing
support for passing object files via response file.
Suggested-by: Peter Keuschnigg <peter.keuschnigg@pmu.ac.at>
Recently used cmake-gui locations are searched only on Windows because
the Windows registry is used to record the values. This behavior is
historical and may be removed by a policy in the future so rather than
implementing it on other platforms simply document the current behavior.
This command does not support generator expressions. The documentation
was mistakenly extended to claim it in commit v3.0.0-rc1~60^2~3 (Help: Mark
up the buildsystem commands documentation, 2014-02-03).
Since commit v2.8.12~437^2~2 (VS: Separate compiler and linker PDB files
2013-04-05) we no longer set /Fd with the PDB_NAME or PDB_OUTPUT_DIRECTORY
properties. Those properties now exclusively handle linker PDB files.
Since STATIC libraries do not link their compiler PDB file becomes more
important. Add new target properties "COMPILE_PDB_NAME[_<CONFIG>]" and
"COMPILE_PDB_OUTPUT_DIRECTORY[_<CONFIG>]" to specify the compiler PDB
file location and pass the value to the MSVC /Fd option.
048be205 Help: Add release notes for the 'faster-parsers' topic
7c565d2f cmGeneratorExpression: Improve parsing in StripEmptyListElements
68eb1757 cmGeneratorExpressionLexer: Use a switch statement to parse
67253133 ExpandListArguments: Optimize the parser
Move the note about VS 6 into the PDB_NOTE.txt common include file
and include it from the per-config properties too. Also re-word
the note to clarify the separate compiler and linker flags involved
and state explicitly that compiler flags are not affected.
6e89c8a5 install: Support generator expressions in FILES and PROGRAMS mode
f11f7b34 cmInstallFilesGenerator: Add reference to calling cmMakefile
e190236c Help: Format install() command documentation
Teach the install(FILES) and install(PROGRAMS) commands to evaluate
generator expressions in the list of files.
Extend the ExportImport test to cover installation cases involving
generator expressions.
Historically CMake used three version components for the feature level.
We released new features while incrementing only the third version
component. Since commit v2.8.2~105^2~4 (New version scheme to support
branchy workflow, 2010-04-23) we used the fourth version component for
bug-fix releases and the development date:
<major>.<minor>.<patch>[.<tweak>][-rc<n>] = Release
<major>.<minor>.<patch>.<date>[-<id>] = Development
This solidified use of three components for the feature level, and was
necessary to continue releasing 2.x versions because:
* Some existing projects performed floating-point comparisons of
${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION} to 2.x numbers
so ``x`` could never be higher than 9.
* Version 2.9.<date> was used briefly in post-2.8.0 development in
CVS prior to the transition to Git, so using it in releases may
have caused confusion.
Now that we are moving to 3.x versions, these two restrictions go away.
Therefore we now change to use only two components for the feature
level and use the scheme:
<major>.<minor>.<patch>[-rc<n>] = Release
<major>.<minor>.<date>[-<id>] = Development
People will be tempted to put things there for convenience, thereby
causing conflicts similar to
http://thread.gmane.org/gmane.comp.compilers.clang.devel/35162/focus=35169
where it is conceivable that the LLVM developers could put a flag on
a target for convenience, which would cause conflicts for some downstreams.
When building boost with an alternate namespace the libraries generated
will have a different naming convention. This is often done to ensure
no symbol conflicts with external libraries built against a different
version of boost. If the namespace used is "myprivateboost::" instead
of "boost::" then the libraries built will be named myprivateboost_foo
instead of boost_foo. Add an option to specify a custom namespace used
to alter the library names that get searched for.
Manually read through version control history since the 2.8.12.2
release and write release notes for important user-facing changes.
Co-Author: Stephen Kelly <steveire@gmail.com>
Starting with 3.0 we will use only two components for the feature level,
and policies are only ever introduced with a bump to the feature level
version.
4b7f2f52 Help: Add hyperlink targets for argument types in cmake-language(7)
113df227 Remove ChangeLog.manual
79f55909 Remove ChangeLog.txt
d25dbc90 Tests/BundleTest: Drop use of ChangeLog.txt
ccc87047 Help: Add documents to collect notes between releases
70309e70 Help: Add documents for release notes
34ea1f15 Utilities/Sphinx: Add option to build 'text' format
Describe the meaning of each version component in more detail in the
documentation of CMAKE_VERSION. Simplify the per-component version
variable documentation by referencing the main variable.
Include information about how to compare version strings. Also add
an historical note about the version scheme used prior to commit
v2.8.2~105^2~4 (New version scheme to support branchy workflow,
2010-04-23).
Add a release/dev.txt file and include it from release/index.rst in
development versions. Add a "Changes Since Release" section with a
toctree that globs adjacent "dev/*" documents. Add a sample topic
document explaining how topic-specific release note documents work.
This approach will allow developers to write release notes for their
changes as they are made. The release manager may then consolidate and
organize the notes for a specific release version.
Add a release/index.rst document titled "CMake Release Notes" to hold
the toctree for release notes. Add a "Release Notes" section to the
top-level html document index to link to the new document.
The old documentation stated that "all header files" were considered,
which was not true for any sensible definition of "all header files".
Only header files with certain names are considered.
Document the filename patterns matched for parsing.
4271a4ed Help: Add information about INTERFACE_AUTOUIC_OPTIONS.
7935f4de Help: Note that AUTOMOC consumes the defines and includes from targets.
2739a6f9 Help: Move Qt tool invocation information to a generic cmake-qt manual.
Add an introduction about the use of different package types, and the
ability to use Qt 4 and 5 versions together in a single buildsystem.
Add a section about automatic linking of the qtmain.lib library and
how to disable it.
Teach the project() command to set variables
{PROJECT,<PROJECT-NAME>}_VERSION{,_MAJOR,_MINOR,_PATCH,_TWEAK}
holding the project version number and its components. Add project()
command option "VERSION" to specify the version explicitly, and default
to the empty string when it is not given.
Since this clears variables when no VERSION is given, this may change
behavior for existing projects that set the version variables themselves
prior to calling project(). Add policy CMP0048 for compatibility.
Suggested-by: Alex Neundorf <neundorf@kde.org>
Teach the project() command to recognize an optional "LANGUAGES"
keyword after the project name and prior to the list of languages.
Do not allow multiple copies of the keyword. If the keyword is
specified and no languages are listed, imply NONE.
Introduce policy CMP0047 to control resetting the id for
compatibility.
De-duplicate content in the QNX platform file by including the GNU
one. QNX is a form of GNU platform.
Do not clear CMAKE_SHARED_LIBRARY_${lang}_FLAGS variables. They
are populated again later by the Compiler/GNU.cmake file anyway.
Modify the CMAKE_CXX_COMPILE_OBJECT variable only when the QCC
compiler id is in use, and the language is CXX. Use the QNX
recommended flag for QCC instead of the gcc compatible -x flag.
Populate new module files to handle system includes and depfiles
when using the QCC compiler.
Remove code which unsets the system include and depfiles related
variables. When a GNU driver is used instead of the QCC one, the
appropriate flags will be used. These variables were previously
cleared for lowest-common-denominator compatibility with both
drivers.
Define a new 'CMAKE_CONFIGURE_DEPENDS' directory property that projects
can use to specify input files to the CMake configuration process.
Extend the RunCMake.Configure test to verify that the build system
re-runs CMake when this input changes.
Add documentation entries for variables
CMAKE_OSX_ARCHITECTURES
CMAKE_OSX_DEPLOYMENT_TARGET
CMAKE_OSX_SYSROOT
Explain what each does and when/how they should be set.
Remove independent doc listing for Qt4ConfigurationSettings, Qt4Macros
and UseQt4. These are implementation details.
Recommend the use of IMPORTED targets.
Remove references to the UseQt4 file, which is obsolete in light of
the IMPORTED targets.
Add documentation for automatic tool invocation and options.
Remove reference to variables which should not be needed in modern
implementations.
73e9340 get_target_property: Error on non-existent target.
ab9f58f FindQt4: Ensure target exists before calling get_target_property.
37ebeb9 FindQt4: Fix use of get_target_property to use actual target name.
6aabb6a Genex: Use case-sensitive comparison for COMPILER_ID.
5bb53f6 cmTarget: Deprecate COMPILE_DEFINITIONS_ properties with a policy.
3917d86 Genex: Add a nullary form for CONFIG
5169130 Help: Document the target properties exported to IMPORTED targets.
ee21f1c CompatibleInterface: Test debugging of not-set property.
80e9fe9 Help: Note that language-specific 'built-ins' are set by the project command.
0b5bf8a Help: Mention CMAKE_DISABLE_FIND_PACKAGE_<PackageName> in package docs.
28c865b Tests: simplify Qt4 target usage
6cfe6b8 Help: Fix typo: 'target' -> 'target property'
b7deca4 Test: Remove obsolete commented code.
9c9f69f Genex: Make EQUAL support upper case binary literals
6eb3218 Genex: Fix case of methods in the dag checker.
646c6ec Genex: Use a preprocessor loop to implement transitive DAG check.
711fb38 Genex: List transitive properties and methods as a table, not two lists.
802a28f Add cmHasLiteralSuffix API.
This is consistent with other similar expressions such as PLATFORM_ID,
and makes the CONFIGURATION expression obsolete.
Fix an off-by-one error in
GeneratorExpressionContent::EvaluateParameters exposed by a unit test.
Remove the test for 'bad' nullary use of $<CONFIG>.
Add a unit test to verify that $<CONFIG> and $<CONFIGURATION> have
the same value.
Describe how to define a buildsystem of binary targets, how to
express dependencies between them, how to add build specifications,
how to specify usage requirements, transitive and compatible
propagation and the various pseudo targets.
There is not really any need to. Downstreams can either rely on it
being provided by CMake, or copy and distribute it.
Change the documented include for the find_dependency macro.
Teach the export command to handle export sets defined by invocations
of install(TARGETS ... EXPORT foo). This makes maintenance of targets
exported to both the build tree and install tree trivial.
Revise the organization introduced in commit 2c7cd95c (Help: Organize
top-level index, 2013-10-28) to drop "Other Manuals" and put them in
"Reference Manuals" because the distinction between them has blurred.
Perhaps a better breakdown of the reference manuals will emerge in
the future.
While at it, sort the reference manual toctree by name.
Manually update reStructuredText formatting. Use a definition list
for the possible if() tests supported. Add inline literal markup
as appropriate. Also make minor wording tweaks to make it flow
better with the new markup.
259bf09 Make the cmStrictTargetComparison operate on const cmTarget*.
8cc3cdb Help: Fix up the VISIBILITY_INLINES_HIDDEN docs.
1396ab8 Don't generate self-references for system include directories.
Since commit 5f5c92b9 (VS: Add internal APIs to find MSBuild,
devenv/VCExpress, and msdev, 2013-11-13) the VS generators have
known how to lookup the locations of their build tools directly.
Expose this information to CMake language code by defining new
variables to hold the paths to these tools.
98093c4 QtAutoUic: Add INTERFACE_AUTOUIC_OPTIONS target property.
02542b4 QtAutoUic: Handle new -include command line parameter.
1242f4e Genex: Add {UPPER,LOWER}_CASE and MAKE_C_IDENTIFIER.
754b321 QtAutogen: Use config without prefix in map key.
5838aba Export: Report error on relative include with genex.
7a3e45b Export: Prefix relative items with genexes in INSTALL_INTERFACE.
f088a32 Export: Process INSTALL_INTERFACE in INCLUDES DESTINATION.
9eedc85 Export: Process relative includes after genex evaluation.
80790f3 Export: Test existing behavior of exporting includes with genexes.
38afc82 target_include_directories: Allow relative path with genex
Document PDB_NAME and PDB_OUTPUT_DIRECTORY as applying only to shared
libraries and executables. Add an explicit note to explain why they
do not work for static libraries.
Transitively consume the property from linked dependents.
Implement configuration-specific support by following the pattern
set out for compile definitions and includes in cmQtAutoGenerators.
Implement support for origin-tracking with CMAKE_DEBUG_TARGET_PROPERTIES.
This is motivated by the needs of KDE, which provides a separate
translation system based on gettext instead of the Qt linguist
translation system. The Qt uic tool provides command line options
for configuring the method used to translate text, and to add an
include directive to the generated file to provide the method.
http://thread.gmane.org/gmane.comp.kde.devel.frameworks/7930/focus=7992
Implement the interface to provide the uic options as a usage-requirement
on the KI18n target, as designed for KDE.
Diagnostics which check the sanity of exported include paths
previously skipped over any path containing a generator expression.
Introduce a policy to issue an error message in such cases.
The export files created in the OLD behavior are not usable, because
they contain relative paths or paths to the source or build location
which are not suitable for use on installation. CMake will report an
error on import.
Move "extra" generators to their own section instead of duplicating them
for each corresponding main generator. Divide the list of main
generators into command-line and IDE sections and sort the names within
each section. Document the environment from which each kind of
generator may be used.
Add a section to each "extra" generator documenting which main
generators may be used with it.
Use definition lists instead of a preformatted block to enumerate
the genex documentation.
Consistently capitalize the description.
Use ``...`` to format genex parameters in the description.
Turn references to commands into links.
Add high level documentation about the motivation for generator
expressions.
Regroup expressions into subsections for different genex types. Add
a high-level description and example of the expressions in each
section.
Explode the documentation for filesystem artifacts, instead of only
referring to the variations.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.
If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.
This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.
If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.
The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
Brad King
Jiri Malak
Stephen Kelly
Matthäus G. Chajdas
Ben Boeckel
Chuck Atkins
Alex Merry
Raphael Kubo da Costa
Rolf Eike Beer
Nils Gladitz
Eran Ifrah
Clinton Stimpson
Peter Kümmel
Alex Neundorf