882f48e5 Link libraries by full path even in implicit directories
318cd370 Help: Add link target for Find Modules section of cmake-developer.7
1535dcd8 Tests: Teach RunCMake to optionally merge command output to stdout
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
Prefix test commands with the CROSSCOMPILING_EMULATOR property
for target executables. This allows test suites to be run on the host
when crosscompiling.
If the CMAKE_CROSSCOMPILING_EMULATOR variable is defined, and
CMAKE_CROSSCOMPILING is TRUE, then use CMAKE_CROSSCOMPILING_EMULATOR to run
the try_run executables. This prevents the need to populate
TryRunResults.cmake when cross compiling.
Add CROSSCOMPILING_EMULATOR target property for executables. This is used by
subsequent patches to run exectuables created for the target system when
crosscompiling. The property is initialized by the
CMAKE_CROSSCOMPILING_EMULATOR variable when defined.
Some tests may need to read "cmake --build" output passed through from
native build tools and do not know if it will be on stdout or stderr.
Optionally use the same variable for the execute_process output so
that it merges them and we can always match using expected stdout.
RPM, DEB and archive packages were not created
in cases when CPACK_<generator>_COMPONENT_INSTALL
was set to ON and a single component existed.
Patch also changes CPackRPM test to implicitly
test for this case.
Otherwise an #include directive on the first line of a source file is
ignored if the file contains a Byte-Order-Mark.
Suggested-by: Aleksey Konovalov <konovalov.aleks@gmail.com>
Add policy CMP0059 to cover this change. The property has been
deprecated since CMake 2.4 anyway.
This will help clean up cmMakefile -- the DefineFlagsOrig member should
not need to exist.
When matching ctest command-line output, we must account for the
formatting of times that take 10 seconds or more. The values are
right-justified, so use " +" to match any amount of space before them.
Revert commit v3.0.0-rc1~175^2~20 (add_dependencies: Disallow use with
INTERFACE_LIBRARY, 2013-12-25). Teach our dependency analysis to
transitively follow INTERFACE target utility dependencies as was done or
IMPORTED targets in commit v2.8.6~127^2~1 (Allow add_dependencies() on
imported targets, 2010-11-19). Extend the InterfaceLibrary test with a
case to cover header generation for a header-only INTERFACE library via
a custom target.
Extend the ``DATA{Dir/,...}`` syntax with a new ``RECURSE:`` option
to enable recursive matching of associated files. This will allow
an entire directory tree of data to be referenced at once.
bd9c7f9b Ninja: Add policy to require explicit custom command byproducts
ed8e30b0 cmGlobalNinjaGenerator: Optimize handling of known build outputs
ad094f43 cmGlobalNinjaGenerator: Fix spelling of "unknown"
82a37d3c cmGlobalNinjaGenerator: Drop unused member
Add policy CMP0058 to avoid generating 'phony' ninja rules for unknown
custom command dependencies. This requires projects to specify their
custom command byproducts explicitly. With this requirement we no
longer have to assume that unknown custom command dependencies are
generated and can instead simply assume they are source files expected
to exist when the build starts. This is particularly important in
in-source builds. It is also helpful for out-of-source builds to allow
Ninja to diagnose missing files before running custom command rules that
depend on them.
GLOB lists directories by default and GLOB_RECURSE does not.
LIST_DIRECTORIES enables user to control the behavior explicitly for
consistently for both GLOB and GLOB_RECURSE.
Implement a brand new FindMatlab module:
- Add support for versions and components.
- Find Matlab and its version in a more precise and multiplatform way.
- Add API to create a new mex extension with documentation.
- Add API to add matlab unit tests (with or without the unit test framework).
- Find as much as possible based on a single Matlab_ROOT_DIR cache entry
and allow the user to change it to re-find everything.
232a6883 Help: Add release notes for target-language-genex.
9e168941 File(GENERATE): Process genex evaluation files for each language.
b734fa44 Genex: Allow COMPILE_LANGUAGE when processing include directories.
0b945ea9 Genex: Allow COMPILE_LANGUAGE when processing compile definitions.
5c559f11 Genex: Enable use of COMPILE_LANGUAGE for compile options.
e387ce7d Genex: Add a COMPILE_LANGUAGE generator expression.
4a0128f4 VS6: Compute CMAKE_*_FLAGS and COMPILE_DEFINITIONS* only when needed
Move the test cases from Tests/CMakeTests/ConfigureFileTest.cmake.in
over to use the RunCMake.configure_file infrastructure. This does much
more robust verification of CMake output for each test case, and would
have caught the regression fixed in our parent commit.
A more-specific error message is always displayed earlier in the
output if any real error occurred. This final summary message
is distracting to readers searching through the output for the
word "error". Simply drop it.
Allow URL templates to contain a %(algo:<key>) placeholder that is
replaced by mapping the canonical hash algorithm name through a map
defined by the <key>.
Extend the Module.ExternalData test to cover the behavior.
Extend the RunCMake.ExternalData test to cover error cases.
e2b9e7f7 Tests: Drop unnecessary stderr matching from RunCMake.ctest_memcheck
7ce9f6e2 Tests: Teach RunCMake to tolerate 'Error kstat returned' lines in test output
69de0f7e Tests: Teach RunCMake to tolerate Guard Malloc lines in test output
57f2aa7c Tests: Teach RunCMake to tolerate BullseyeCoverage lines in test output
b04c8ec3 Tests: Match curl error in RunCMake.ctest_submit FailDrop-* cases
1d82105e Tests: Rename RunCMake.{CTestMemcheck => ctest_memcheck}
d7662141 Tests: Rename RunCMake.{CTestSubmit => ctest_submit}
9b50388b Tests: Split RunCTest helper out of RunCMake.CTest(Submit|Memcheck)
76e7c22b Tests: Rename RunCMake.CTestMemcheck internals to match CTestSubmit
Otherwise find_library is unable to lookup the XCTest framework which
is not located in the SDK serach path:
In the 10.10 SDK the SDK frameworks are located here:
$DEVELOPER_DIR/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/System/Library/Frameworks
whereas the Platform SDKs are located here:
$DEVELOPER_DIR/Platforms/MacOSX.platform/Developer/Library/Frameworks
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
If a feature is added multiple times via ADD_FEATURE_INFO it should
appear only once in FEATURE_SUMMARY.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
bb9d71b4 Replace loops with algorithms.
4afe6c26 cmAlgorithms: Add cmReverseRange adaptor.
a3a0a8c2 cmAlgorithms: Add cmFindNot algorithm.
8c74a41f cmRST: Replace two erase with a rotate and larger erase.
61fe1919 cmAlgorithms: Update concept requirement to FowardIterator
09d6125b cmAlgorithms: Move cmRotate out of 'implementation detail' namespace.
8ed6ecac cmRST: Move two algorithms beside each other.
dfe49c20 cmRST: Use std::min where appropriate.
21b0654a cmGlobalGenerator: Convert set insert algorithm to vector algorithms.
416df93a Convert some raw loops to cmWrap.
37b88d34 cmAlgorithms: Add cmWrap.
a2818093 Use cmJoin where possible.
76207b08 cmCacheManager: Replace loop with algorithm.
60c3bb73 cmGlobalGenerator: Replace loop with algorithm.
05fec779 cmTarget: Port loop to algorithm.
9c225767 cmGlobalGenerator: Replace set::insert algorithm with cmRemoveDuplicates.
...
The Dummy*-stderr.txt files were needed only to match platform-specific
memcheck tooling output and verify that stderr is otherwise empty. Now
that the RunCMake infrastructure knows how to strip such lines before
matching, we can simply drop these files and use the default empty
string match.
When RunCMake tests run on Solaris, the output may contain unexpected
lines of the form "Error kstat returned...". These lines are printed by
SystemInformationImplementation::RunProcess when called from
SystemInformationImplementation::ParseValueFromKStat (see issue #12066).
Until someone investigates why kstat returns values outside the range it
documents, simply remove such lines from the actual output before
matching it against the expected output.
When RunCMake tests run under Xcode Guard Malloc, Guard Malloc may add
lines of the form "<tool>(<pid>) malloc:..." to the output. Remove such
lines from the actual output before matching it against the expected
output.
When RunCMake tests run under dynamic analysis, Bullseye may add lines
of the form "BullseyeCoverage..." to the output. Remove such lines from the
actual output before matching it against the expected output.
The find_package command already knows how to compute installation
prefixes from PATH. Use the same approach to establish prefixes for
find_library, find_file, and find_path to use to look in directories
like "<prefix>/lib[/<arch>]" and "<prefix>/include" for libraries and
headers. This will reduce the amount of configuration end users need to
do to establish a work environment rooted under a specific prefix.
Several tests use slight variations of the same logic to enable CPack
RPM tests. Consolidate this logic into one check before any tests are
added. Look for 'rpmbuild' only on Linux and only when the test build
tree does not have spaces in the path. In particular, this will make
the result available in time for the RunCMake.CPackRPM test to be
activated even if CMake is configured exactly once.
This will allow per-config destinations for targets in EXPORT sets.
Using multiple install(TARGETS) with separate CONFIGURATIONS is
rejected as a target appearing more than once in an export set.
Now instead one can write
install(TARGETS foo EXPORT exp DESTINATION lib/$<CONFIG>)
to get a single logical membership of the target in the export set
while still having a per-config destination.
The moved tests are related to paths in INTERFACE_INCLUDE_DIRECTORIES
in general, and when exporting, and covering cases of the install
location being within the build or source prefix etc. Other build
properties containing paths should have similar tests, so this
allows some parameterization while keeping the preparation of the
various directory structures.
Define an empty string in CMAKE_<LANG>_STANDARD_DEFAULT to mean that
the toolchain has no notion of lanuage standard levels. In this case
the <LANG>_STANDARD[_REQUIRED] properties will have no effect.
Update the RunCMake.CompileFeatures test to exclude the
LinkImplementationFeatureCycle test when there is no standard default.
It can never fail because no use of specific features will adjust the
CXX_STANDARD level required for any target since the standard levels
have no meaning in this case.
With the Makefile generators we expect that touching or modifying the
input file of a configure_file, or removing its output, will cause CMake
to re-run on the next build. Extend the RunCMake.configure_file test
with a case covering this. Also check that CMake does not re-run if
nothing has changed.
With the Makefile and Ninja generators we expect that touching the input
source file for a try_compile will cause CMake to re-run on the next
build. Extend the RunCMake.try_compile test with a case covering this.
Also check that CMake does not re-run if nothing has changed.
Read file names from the lines of a specified file. Reject input lines
starting in '-' to leave room for option parsing to be added later. Add
just '--add-file=' now to allow files starting in '-' to be specified.
d0adcccb try_run: Add tests for LINK_LIBRARIES with mock libraries.
223c5cb7 try_run: Add test for bad link libraries.
e2b1f058 try_run: Add support for LINK_LIBRARIES option.
Most functionality is already implemented in Source/cmCoreTryCompile.{h,cxx}.
Document and improve argument parsing.
This functionality is already being used by a number of modules, like
CheckCSourceCompiles.cmake, but it is not documented.
f3e0b6f1 CTestCoverageCollectGCOV: Add module to run gcov
6dd980e0 ctest_submit: Make CDASH_UPLOAD mode arguments more strict
5dc33f89 ctest_submit: Add CDASH_UPLOAD mode to upload files to CDash
When curl is given a URL of the form '<something>://' it tries to
resolve '<something>' as a host name. If the host happens to exist and
have a server then the drop might actually appear to work. Instead use
an explicit '-no-site-' host to ensure it cannot connect.
Reported-by: Gilles Khouzam <Gilles.Khouzam@microsoft.com>
Add an option to set the mtime of entries in a tarball so that one can
create a tarball with a consistent content hash (e.g. MD5) for a given
set of files regardless of their current timestamps on disk. This will
be useful for submission of tarballs to CDash, which tracks content
hashes to avoid duplication.
Inspired-by: Bill Hoffman <bill.hoffman@kitware.com>
004e1540 Features: Record for GNU 4.4.
2a5ca650 Features: Wrap failure-test in UNIX condition.
1ae2c6b2 Features: Blacklist cxx_constexpr test for GNU 4.5.
c66e3317 Features: Use a more-common feature in cycle-test.
c43a6dc5 Features: Update comment in test to match the code.
78259135 Features: Test presence of cxx_auto_type with genex.
7b9fc88b Features: Remove outdated comment.
Replace the TODO comment with calls to run_ctest_submit_FailDrop. For
now leave curl errors out of expected stderr. They can be ported over
from CTestTestFailedSubmit-* tests later.
Cover command invocation argument errors. Prepare infrastructure
to cover failed 'drop' cases, but do not cover them yet because
we need to collect error messages from each platform.
We require that the $<$<COMPILE_FEATURES:cxx_feature>:empty2> generates
a '1' when CXX11 is enabled. GNU 4.4 does not support cxx_nullptr, but
does support cxx_auto_type.
770ba876 Help: Add notes for topic 'GNU-4.6-compile-features'
b15c008f Features: Record for GNU 4.6.
f13a2eb1 Features: Adjust the RunCMake test to use more-common features.
1f19ac4d Features: Adjust cxx_variadic_templates unit test for GNU < 4.7.
0798d1e5 Features: Extend the generalized_initializers test for GNU < 4.7.
938bd94e Features: Test __GXX_EXPERIMENTAL_CXX0X__ macro for GNU < 4.7 compatibility.
462c630b Features: Don't test __cplusplus value for CXX98 on GNU.
222ec86f Features: Test an old value of __STDC_VERSION__ for GNU < 4.7 compatibility.
6e909035 Features: Record C/CXX dialect flags for GNU 4.6.
bfc995cc Features: Remove wrong content from else() condition.
1532b921 Features: Make cxx_noexcept available from GNU 4.6.
1f4649e6 Features: Update the default_dialect test for old GNU-like compilers.
a60027a6 Features: Ensure appropriate return value from feature test macros.
Add support for a special URL template to map the fetch operation
to a project-specified .cmake script insead of using file(DOWNLOAD).
Extend the Module.ExternalData test to cover the behavior.
Extend the RunCMake.ExternalData test to cover error cases.
The second hunk of commit 07d1f6fc (Features: Properly evaluate if the
compiler supports cxx_final, 2014-12-31) was a workaround for a bug in
the COMPILE_FEATURES generator expression that caused it never to return
0. Revert the workaround so we can fix the bug instead.
Revert commits:
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
This topic was merged to master prematurely, so remove it.
Commit v3.1.0-rc1~297^2~5 (cmTarget: Drop 'head' argument from
GetSourceFiles, 2014-07-10) exposed a dormant bug in source file computation,
causing the test case to regress. After that commit, the source file
computation and caching finds an existing container of source files. Prior to
that patch, the GetSourceFiles method was called with either a null pointer
for the head cmTarget, or it was called with the this pointer. The
processSources method is eventually called, which normalizes the difference
between the null pointer and the this pointer for the head target. However,
the cache key depends on the actual pre-normalized pointer. The change in
that commit caused the entry to be found in the cache where it was not before,
which resulted in incorrect behavior.
Prior to that commit, the test case also fails if the GetSourceFiles overload
taking a vector<cmSourceFile*> is changed to normalize the head target at
the beginning of the method:
cmTarget const* head = head_ ? head_ : this;
Such a construct was correctly used in other locations where similar caching
was in place, before being removed in commit v3.1.0-rc1~310^2~25 (cmTarget:
Remove 'head' argument from GetLinkInformation, 2014-06-12), but is not
neccessary anymore.
Commit v3.1.0-rc1~674^2~2 (cmTarget: Cache the cmSourceFiles in
GetSourceFiles., 2014-04-05) introduced the caching, but fails the test case
for an unrelated reason. That unrelated error was introduced in
commit v3.1.0-rc1~688^2~5 (cmTarget: Allow any generator expression in
SOURCES property., 2014-03-18) and fixed in
commit v3.1.0-rc1~561^2~1 (cmTarget: Fix listing of source files at
configure-time., 2014-04-13).
All commits which fail the test case in the testable way do so when such a
cached version of the source files is found and returned at generate
time. In the test case, the cached content is populated at configure-time
through the use of the deprecated LOCATION property with CMP0026 OLD. The
cached content is an empty container for the bar target in the test case,
because its source file 'foo.cpp.o' is not known until generate-time. That
means that no source files are available to compute the link language and
the reported error is issued.
The actual problem is that the SourceFilesMap should be cleared after
configure time by cmTarget::ClearLinkMaps. Clear it there now.
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
a15675ef Features: Quote all compiler names when comparing with COMPILER_ID
07d1f6fc Features: Properly evaluate if the compiler supports cxx_final.
6296192d Features: Add a comment explaining part of test.
c13656e7 Features: Test nullptr as a side-effect activation of static_assert.
3e34e833 Features: Test feature propagation with more-common features.
b3e86f4e Features: Test an expectation of whether OVERRIDE_CONTROL is expected
Notes:
VS2015 and above are the only MSVC versions to support cxx_final, so remove
usages from the tests, and instead only test for cxx_override.
VS2012 and above to conform to cxx_decltype_incomplete_return_types
proposal, but without support for auto return types the dcl.type.simple
example in the proposal doesn't compile.
VS2013 and above to conform to the updated cxx_contextual_conversions proposal,
but VS2010 and above pass the test.
Compilers such as MSVC have no explicit flags to enable C++11 mode,
it just is always on. So only run the link tests with compilers that require
a flag to specify the language version.
Previously we expanded HAVE_FINAL to determine what the copied_file number
would be, but when we don't have cxx_final than HAVE_FINAL is not defined.
What we really want is to use expected_result.
For complex*, CustomCommand and OutDir tests, non-ascii paths
are avoided in test code by using relative paths, and setting
the working when running the test. This also avoids the
need to internationalize the test code.
For RunCMake.GeneratorExpression, use a UTF-8 encoding in
file(STRINGS) to retrieve the compiled absolute path correctly.
Expect tests to specify stderr content if it is present.
Fix the CMP0019 test, which has only been testing the WARN status
until now. Specify in the CommandLine and FPHSA tests that content
is at least one character.
Set policies in the Language and CheckModules tests, which have empty
test output, modulo unrelated policies on some platforms.
Mark the generated source file with the GENERATED property explicitly
since it is not marked automatically as the output of any custom
command. Mark both the 0 and 1 variants so it works no matter the
outcome of the generator expression.
The CTestTestMemcheck test cases all try to check the ctest output with
a regular expression. They fail intermittently due to ordering of the
portions of the output that come from stdout and stderr being mixed.
Convert all the test cases to use the RunCMake infrastructure to match
stdout and stderr separately.
We use cmGlobalGenerator::GetDirectoryContent to avoid repeating
directory listings. However, GetDirectoryContent loads content from
disk at most once. This breaks find_library calls that occur when disk
content has changed since preceding find_library calls.
Teach cmGlobalGenerator::GetDirectoryContent to save the directory
modification time when content is loaded and re-load content if it
changes.
Create a RunCMake.find_library test with a case covering this.
Copy CMAKE_EXE_LINKER_FLAGS into the test project generated by
try_compile, just like we already copy CMAKE_<LANG>_FLAGS.
Add CMake Policy CMP0056 to activate this behavior in a compatible way,
but do not warn by default when the policy is not set since it will
affect all try_compile calls.
Extend the RunCMake.try_compile test with a case covering this behavior
for each policy setting.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
8a75c7ef Help: Document the export limitation of INTERFACE_SOURCES.
e1348056 Export: Disallow export of targets with INTERFACE_SOURCES
bb5905bb cmTarget: Don't allow relative paths in INTERFACE_SOURCES
This can be allowed in the next release, but it needs to have some
features present and tested such as
* Ensuring that relative paths do not appear in the generated property.
* Ensuring that paths to the source or build directories do not appear.
* Generating a check in the file for CMake 3.1 or later so that the
resulting property will be consumed.
* Ensuring that any referenced targets are part of an export set and
generating a check for them.
* INSTALL_INTERFACE and BUILD_INTERFACE content.
All of these checks are already done for INTERFACE_INCLUDE_DIRECTORIES,
but it is too late to add them for INTERFACE_SOURCES for CMake 3.1.
As the checks introduce some new error conditions, it is better to
disallow exporting fully for this case and introduce proper error
conditions later instead of policies.
Follow the pattern of checks that are made for INTERFACE_INCLUDE_DIRECTORIES.
Existence is already checked by cmSourceFile::GetFullPath. Add a check
to disallow relative paths in source directories. Otherwise code such as
target_sources(lib1 INTERFACE foo.cpp)
would fail if consumed by a target in a different directory.
Unlike the INTERFACE_INCLUDE_DIRECTORIES behavior, we don't care whether
the entry comes from an IMPORTED target or not. In the include directories
case, the directory for a non-imported target might not exist yet but
might be created. In the sources case, a file which does not yet
exist in the filesystem must be explicitly marked with the GENERATED
property.
Adjust existing tests and add a new test for the error.
Extend the write_compiler_detection_header interface to allow
specifying a location for supplementary files, and getting the
list of resulting files as a variable.
Re-run if the input file changes or if the output file is removed.
This only works with the Makefile generators currently. The limitation
of the Ninja generator is tracked as issue #15256. The IDE
generators will need larger refactoring as they currently rely on
being able to determine the depends and output files at the start of
generate-time, which is too early for the file(GENERATE) case.
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
The evaluation files must be known before cmTargetTraceDependencies
attempts to find them, but we must actually generate the files after
cmTargetTraceDependencies, as that can add to target SOURCES. The
limitation is that the generated output name must not depend on the
SOURCES of a target if the generated file is used by that target.
Mark the output files as GENERATED so that trace dependencies does
not expect them to already exist in the filesystem.
Move the invokation of ForceLinkerLanguage in the Generate logic
to after the generated file names are known. ForceLinkerLanguage
tries to determine the sources of a target (in order to determine
an already-known language) and otherwise fails to get information
about the generated file.
Test that the output of file(GENERATE) can be used as a target source
file and that accessing the target SOURCES in the name of the output
file is an error. Accessing the TARGET_OBJECTS would be a similar
error if it was legal to use that generator expression in this
context. That is not currently possible and is a different error
condition, so test the current error output as a reminder to change
the expected output if that becomes possible in the future. Test
that generated rule files resulting from cmTargetTraceDependencies
appear in the SOURCES generated in the output file.
1531df2b configure_file: Warn about unknown arguments
4abbb140 Qt4: Fix configure_file call to use COPYONLY, not COPY_ONLY
bd7ba8e2 KWSys: Fix configure_file call to use COPYONLY, not COPY_ONLY
e9282782 Help: Fix configure_file call to use COPYONLY, not COPY_ONLY
Extend the RunCMake.configure_file test with a case covering possible
common typos of the COPYONLY option.
Reported-by: Iosif Neitzke <iosif.neitzke@gmail.com>
609037f4 ExternalProject: Add unit tests for CMAKE_CACHE_DEFAULT_ARGS
98cdb658 ExternalProject: Add CMAKE_CACHE_DEFAULT_ARGS arguments
36cf8a1e Tests/Tutorial: Fix when USE_MYMATH is OFF
d1b62185 Merge branch 'parent-scope-tests' into variable-pull-failure
5f414cef Revert "cmDefinitions: Don't store parent lookups"
e0c0b1ac test: add a test for PARENT_SCOPE with multiple scopes
064c415d test: add test for PARENT_SCOPE behavior
* parent-scope-tests:
test: add a test for PARENT_SCOPE with multiple scopes
test: add test for PARENT_SCOPE behavior
Conflicts:
Tests/RunCMake/set/RunCMakeTest.cmake
In the case of:
-DCACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG:BOOL=TRUE
the variable is parsed out as:
CACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG
because the parser allows '=' in the variable name. Disallow such a name
on the command line.
Given that you have a foobar that identifies itself as 1.2.3 from now on a
find_package(foobar 1.2 EXACT)
will succeed, as 1.2.3 will now be considered as being 1.2. Until now this was
only the case for version 1.2.0.
Unlike with Unix Makefiles generator modifying compiler paths was not
protected with Ninja generator. It was possible to modify them in the
cache without the expected effect on the generated solution. Also
activate corresponding tests with Ninja.
be6a555d Tests: Test setting a generator platform in a toolchain file
d506fee8 Tests: Use -A option to pass generator platform selection
11c9ddd6 ExternalProject: Use -A option to pass generator platform
29bd843e CTest: Use -A option to pass generator platform selection
eb7d8156 cmake: Add -A option to specify a generator platform
858d5a0b Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin
e177e7af FPHSA: Avoid if() dereferencing of quoted variable
425acc52 cmcurl: Use if(DEFINED) to simplify conditions
cede5cbd libarchive: Avoid depending on if() to dereference a quoted variable
2d97178b FindGTK2: Avoid depending on if() to dereference a quoted variable
0b12815d Modules/Test*.cmake: Use if(DEFINED) to simplify conditions
188a1f23 If: Introduce policy CMP0054 - don't dereference quoted variables in if()
b900c1cc If: Extract cmConditionEvaluator from if() implementation
Define the 'cmake -A' option to set CMAKE_GENERATOR_PLATFORM
without having to spell out the whole variable name. We choose
the name '-A' for "platform" because '-P' is already taken, and
in the common use case the "platform" is actually an architecture
(e.g. x64).
Teach the RunCMake test infrastructure to use -A to pass the generator
platform. Extend the RunCMake.GeneratorPlatform test with a case to
verify that the -A option cannot be repeated.
For VS generator names that do not specify the platform name, read
CMAKE_GENERATOR_PLATFORM to get it.
Extend the RunCMake.GeneratorPlatform test with a case covering
use of the x64 platform when the test generator is a Visual Studio
generator whose name does not specify a platform.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
The lexer changes in commit v3.0.0-rc1~495^2 (Add Lua-style long
brackets and long comments to CMake language, 2013-08-06) accidentally
left out matching '[' as a single character in an unquoted argument.
Add a lexer rule to match it and extend the RunCMake.Syntax test to
cover this case.
After calls to ProcessSourceItemCMP0049, check for an empty return
string to detect a failure instead of trusting GetErrorOccuredFlag.
The latter could have been left from a preceding non-fatal error.
Extend the RunCMake.Configure test to cover a case that exposed this
problem.
The generator name is "Xcode", not "XCode". Fix this typo. Explicitly
exclude the SubDirSpaces test on Xcode because it does not work. Also
tell the RunCMake.File_Generate test when Xcode is not multi-config so
it can exlcude the OutputConflict case.
Inspired-by: Daniele E. Domenichelli <daniele.domenichelli@iit.it>
Fix cmTarget::GetSourceFiles to set EvaluateForBuildsystem on the
$<TARGET_PROPERTY:...,INTERFACE_SOURCES> generator expression so that
the $<TARGET_OBJECTS> generator expression is allowed within an
INTERFACE_SOURCES value.
Extend the InterfaceLibrary test to cover this case. Extend the
RunCMake.TargetObjects test to cover failure of $<TARGET_OBJECTS>
when used through $<TARGET_PROPERTY:...,INTERFACE_SOURCES> in a
non-buildsystem context.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
Use the AddInterfaceEntries helper to avoid duplication. In
TargetPropertyEntry, replace the TargetName string member with a
reference to the full cmLinkImplItem that produced the entry. This is
possible because the cmLinkImplItem is available in AddInterfaceEntries
(it was not available in GetIncludeDirectories). Having the full
cmLinkImplItem allows processIncludeDirectories to implement CMP0027 OLD
behavior without repeating the target name lookup.
Update the RunCMake.CompatibleInterface test DebugProperties case
expected output for the new order of the messages.
Commit v2.8.11~156^2~2 (Expand includes and defines transitively
in 'external' genexes., 2013-02-13) introduced a recursive loop
and a stack overflow during evaluation of a link implementation
which depends on a transitive property, such as
add_library(empty1 ...)
add_library(empty2 ...)
target_link_libraries(empty1
PRIVATE
$<$<STREQUAL:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>,/foo/bar>:empty2>
)
There is no use-case for code like that currently, but it should not
cause a stack overflow.
Avoid the recursion by reporting an error early if a case like this
is found.
9998d78d Tests: Speed up RunCMake.include_directories test
6eee5d74 Tests: Drop broken and now unused RunCMake_TEST_FILE option
f0f15b93 Tests: Refactor RunCMake.include_directories to drop RunCMake_TEST_FILE
8707814e Tests: Refactor RunCMake.File_Generate to drop RunCMake_TEST_FILE
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Remove unnecessary language initializations. Change the main
CMakeLists.txt project() call to specify NONE. Use enable_language(CXX)
instead of project() in cases that need it to avoid enabling C too.
We cannot use -DRunCMake_TEST=${RunCMake_TEST_FILE} because test cases
use project(${RunCMake_TEST}) and the project name cannot be a path to a
file. The parent and grandparent commits removed the only uses of the
option. Drop it now.
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Create options "MESSAGE_ALWAYS", "MESSAGE_LAZY", and "MESSAGE_NEVER" to
specify whether to print the "Installing" and "Up-to-date" messages.
Extend the RunCMake.file test with cases covering these options.
Teach cmFileCopier::InstallDirectory to detect whether the destination
directory exists. If so, report it as "Up-to-date" instead of
"Installing". This resolves message asymmetry with file installations.
Extend the RunCMake.file and RunCMake.install tests to check the
installation output on both the first and second run.
Suggested-by: J Decker <d3ck0r@gmail.com>
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
ddec418a Features: Add compiler version support to WriteCompilerDetectionHeader.
b7029576 Project: Add configurable name for version computation macros.
78acaafe Project: Separate simulated compiler id from version detection.
567af1a5 WCDH: Issue a better message for version compatibility.
Xcode 1.5 does not support multiple configurations. The generator also
adds some sources internally that cause extra OriginDebug output.
Update the expected output to tolerate it.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
If we fail to create the generator named by CMAKE_GENERATOR, exit
with an error message instead of crashing. While at it, fix the
wording of the error message when CMAKE_GENERATOR is not set.
Extend the RunCMake.CommandLine test with cases covering the
"cmake --build" option when the named directory does not provide
a CMakeCache.txt with a valid CMAKE_GENERATOR.
Teach set_property and get_property an "INSTALL" property type to be
associated with install-tree file paths. Make the properties available
to CPack for use during packaging. Add a "prop_inst" Sphinx domain
object type for documentation of such properties.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
Add source file properties to control Xcode file type attributes:
XCODE_EXPLICIT_FILE_TYPE => explicitFileType
XCODE_LAST_KNOWN_FILE_TYPE => lastKnownFileType
Add a RunCMake.XcodeProject test to verify generated project content.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Provide a function to write a portable header to detect compiler
features. Generate a preprocessor #error for unknown compilers
and compiler versions whose features are not yet recorded. This
error condition might be relaxed in the future, but for now it
is useful for verification of expectations.
bc9a8bba Makefile: Undef FEATURE_STRING iteration define after use.
eb638c75 Tests: Make CompileFeatures feature list lang-specific.
e2f09aff CMakeConfigurableFile: Remove excess newline.
5109b042 Features: Fix GNU 4.8.1 version test.
6a9fdbeb Test: Parameterize the language in the CompileFeature test.
f5bf9d43 Tests: Make CompileFeature tests use highest standard known.
These policies should be checked at the call site that tries to access
the LOCATION or SOURCES property, not the directory scope containing the
target. Thread the caller context through cmTarget::GetProperty to use
for checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 and RunCMake.CMP0051 tests with
cross-directory cases.
This policy should be checked at the call site that tries to access the
LOCATION property, not the directory scope containing the target.
Thread the caller context through cmTarget::GetProperty to use for
checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 test with a cross-directory case.
Include tests for:
- @ expansion during normal execution
- various characters in variable names for comparison between the new
and the old parser
- corner cases in the parsers
- correct messages when behavior is different
205215fb cmTarget: Add CXX_STANDARD_REQUIRED to control decay.
1df2116b Features: Decay language flag if requested is not available.
c4f4dac2 Project: Fix exit-on-error with compile feature tests.
5bb7ce72 Project: Use nullary form of main for compile feature tests.
64254e7a Project: Remove extern from static string in feature tests.
0d9c99bf Help: Fix order of help entries.
dc7639bd Tests: Fix name of cache variable.
Commit b8af2011 (cmTarget: Fix listing of source files at
configure-time., 2014-04-13) refactored a GetObjectLibrariesCMP0026
method out of GetLanguages. In flight, a conditional use of a target
if available was changed to an assert-available.
This code is only used to read the LOCATION property at configure
time, when the link information is incomplete, and not all targets
are defined, so the assert is inappropriate, even though it can lead
to incorrect information being generated. CMP0026 warns about the
potentially incorrect information anyway.
8d0b1cca Features: FATAL_ERROR on compilers with no recorded features.
447fbb3f Tests: Execute compile features tests unconditionally.
597bb72e Tests: Run RunCMake.target_compile_features unconditionally.
Users of the new target_compile_features command are expected to
check the existence of the CMAKE_CXX_COMPILE_FEATURES variable before
attempting to use it to require features.
When the primary source tree path named by a DATA{} reference does not
exist, produce an AUTHOR_WARNING instead of a FATAL_ERROR. This is
useful when writing a new DATA{} reference to a test reference output
that has not been created yet. This way the developer can run the test,
manually verify the output, and then copy it into place to provide the
reference and eliminate the warning.
If the named source tree path is expected to be a file but exists as a
directory, we still need to produce a FATAL_ERROR.
Since commit e5da9e51 (cmTarget: Allow any generator expression in
SOURCES property., 2014-03-18), source files are computed by
true evaluation of generator expressions, including TARGET_OBJECTS.
This evaluation requires the presence of cmGeneratorTarget objects
since commit bf98cc25 (Genex: Evaluate TARGET_OBJECTS as a normal
expression., 2014-02-26).
Ensure that we don't attempt to evaluate the TARGET_OBJECTS generator
expression at configure-time, as can happen if CMP0024 or CMP0026
are OLD. Use old-style parsing of the source item to extract
object target names in that case.
Avoid calling GetProperty("SOURCES") to bypass warnings from CMP0051.
Refactor existing logic in GetLanguages which is similar in intent to
the new GetSourceFiles code.
Allow directories in the source tree or build tree only if the
install tree is a subdirectory of the source tree or build tree,
as appropriate.
Re-use the test files in the RunCMake.include_directories test
to run in multiple scenarios. Bump the required CMake version
in the test to 3.0 to ensure that the new policy warnings are
emitted correctly.
This can be used to set the compiler features required by particular
targets. An error is issued at CMake time if the compiler does not
support the required feature. If a language dialect flag is required
by the features used, that will be added automatically.
Base the target_compile_features command on cmTargetPropCommandBase. This
gives us 'free' handling of IMPORTED, ALIAS, INTERFACE, non-compilable
and missing targets.
Extend the interface of the target_compile_features command with
PUBLIC and INTERFACE keywords. Populate the INTERFACE_COMPILER_FEATURES
target property if they are set. Consume the INTERFACE_COMPILER_FEATURES
target property from linked dependent targets to determine the final
required compiler features and the compile flag, if needed.
Use the same pattern of origin-debugging which is used for other
build properties.
Record the availability of this feature for GNU 4.8 on (UNIX AND
NOT APPLE) only. In the future, availability can be recorded for
earlier GNU, for other platforms and for other compilers. Initially
the affected configurations are as restricted as possible to allow
for easy testing while extending the features vector in only one
dimension.
The error message when using the set_property API directly is not
very good, but follow up commits will provide origin debugging of
the property and a target_compile_features command which will
provide a configure-time backtrace when possible.
This will allow decoupling the name of the test from the name and
location of the source file under test, which means one source
file can be used for multiple tests.
Rename the PARENT_SCOPE test in RunCMake.set to not use a keyword
of the if() command as a file name. As the filename is now used
with an if condition, this causes a conflict.
9407174b target_sources: New command to add sources to target.
81ad69e0 Make the SOURCES target property writable.
6e636f2e cmTarget: Make the SOURCES origin tracable.
3676fb49 cmTarget: Allow transitive evaluation of SOURCES property.
e6971df6 cmTarget: Make the source files depend on the config.
df753df9 cmGeneratorTarget: Don't add computed sources to the target.
869328aa cmComputeTargetDepends: Use valid config to compute target depends.
5de63265 Genex: Only evaluate TARGET_OBJECTS to determine target sources.
aa0a3562 cmGeneratorTarget: Compute target objects on demand
042c1c83 cmTarget: Compute languages from object libraries on demand.
fdcefe3c cmGeneratorTarget: Compute consumed object libraries on demand.
c355d108 cmComputeTargetDepends: Track object library depends.
e5da9e51 cmTarget: Allow any generator expression in SOURCES property.
5702e106 cmTarget: Include TARGET_OBJECTS genex in target SOURCES property.
857d30b5 cmGlobalGenerator: Add interface to call ForceLinkerLanguages
28e1d2f8 cmStringCommand: Add GENEX_STRIP subcommand.
bf98cc25 Genex: Evaluate TARGET_OBJECTS as a normal expression.
8cd113ad cmTarget: Store strings instead of cmSourceFile* to represent SOURCES.
4959f341 cmSourceFileLocation: Collapse full path for directory comparisons.
fcc92878 cmSourceFileLocation: Remove unused Update method.
59e8740a cmTarget: Remove AddSourceFile method
26d494ba cmTarget: Use string API to add sources to cmTarget objects.
d38423ec cmTarget: Add a method to obtain list of filenames for sources.
...
Disallow the use of config-specific source files with
the Visual Studio and Xcode generators. They don't have
any way to represent the condition currently.
Use the same common-config API in cmQtAutoGenerators. While
it accepts config-specific files, it doesn't have to support
multiple configurations yet.
Loop over the configs in cmTargetTraceDependencies
and cmGlobalGenerator::WriteSummary and consume all source
files.
Loop over the configs in cmComputeTargetDepends and compute the
object library dependencies for each config.
The output of this expression may contain macros for IDEs to replace
such as $(Configuration), $(CURRENT_ARCH) etc. To avoid generating
content which is not usable in other contexts, report an error if
there is an attempt to use it in other contexts.
This commit may be reverted in the future if a solution to the
above difference is implemented.
Remove use of UseObjectLibraries from Makefile and Ninja generators. It
is not needed now because those generators use GetExternalObjects
which already contains the objects from object libraries.
The VS10 generator calls both the UseObjectLibraries and the GetExternalObjects
methods. Ensure that duplicates are not created by skipping objects
from object libraries in handling of GetExternalObjects.
Similarly, fix VS6, VS7 and Xcode object handling by skipping
external objects from OBJECT_LIBRARY usage as appropriate.
The error message in the BadSourceExpression1 test is now reported
by the generator expression evaluator, so it has different text.
Use CMAKE_PREFIX_PATH, CMAKE_FRAMEWORK_PATH, and CMAKE_APPBUNDLE_PATH
cache and environment variables to extend PKG_CONFIG_PATH before calling
pkg-config.
In each of the path in these variables it searches for lib/pkgconfig.
Then, depending on the system, it searches for
lib/${CMAKE_LIBRARY_ARCHITECTURE}/pkgconfig (debian) or for
lib64/pkgconfig (other 64 bit unixes). If any of these path is found,
it is appended to the PKG_CONFIG_PATH enviromnent variable.
Add two new arguments to the pkg_check_module and pkg_search_module
macro, NO_CMAKE_PATH and NO_CMAKE_ENVIRONMENT_PATH. The new signature
are therefore:
pkg_check_modules(<PREFIX> [REQUIRED] [QUIET]
[NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
<MODULE> [<MODULE>]*)
pkg_search_module(<PREFIX> [REQUIRED] [QUIET]
[NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
<MODULE> [<MODULE>]*)
By default, if CMAKE_MINIMUM_REQUIRED_VERSION is 3.1 or later (in
order to keep compatibility with the previous behavior), or if
PKG_CONFIG_USE_CMAKE_PREFIX_PATH is set, the CMAKE_PREFIX_PATH,
CMAKE_FRAMEWORK_PATH, and CMAKE_APPBUNDLE_PATH cache and environment
variables will be added to pkgconfig search path.
The NO_CMAKE_PATH and NO_CMAKE_ENVIRONMENT_PATH arguments disable this
behavior for the cache variables and the environment variables,
respectively, similarly to the find_package() command.
Restore support for the undocumented <CONFIG>_LOCATION target property
removed by commit v3.0.0-rc1~175^2 (cmTarget: Remove support for
<CONFIG>_LOCATION property, 2013-12-30) as part of the CMP0026 OLD
behavior.
9608ef6f Tests: Optionally configure tests exclusively, with an external CMake
9f5bd180 Tests: Drop CMAKE_TEST_GENERATOR(|_TOOLSET) variables
76477267 Tests: Drop CMAKE_TEST_MAKEPROGRAM variable
a8a9fb7e Tests: Rename CMAKE_TEST_MAKEPROGRAM uses for explicit make program
40475573 Tests: Rename CMAKE_TEST_MAKEPROGRAM uses for nested test projects
f99734b2 Tests: Rename CMAKE_TEST_DEVENV -> CMake_TEST_DEVENV
3c01ee5a Tests: Drop CMAKE_TEST_MSVC and test MSVC directly
daf0a5fe Tests: Drop CMAKE_TEST_GENERATOR and CMAKE_TEST_MAKEPROGRAM options
e5096312 Tests: Drop kwsys test
On OS X we pass -DCMAKE_POLICY_DEFAULT_CMP0025=NEW to all tests.
Once tests start using cmake_minimum_required(VERSION 3.0) then
CMake will warn that CMAKE_POLICY_DEFAULT_CMP0025 is unused.
These warnings are not part of the expected test output and can
cause such tests to fail. Pass --no-warn-unused-cli to each test
cmake invocation to tell it not to produce these warnings.
f9d5b1fd Handle Mac OSX source flags for individual files lazily.
64d39841 cmGeneratorTarget: Classify sources on demand, not up front.
d3682d86 cmGeneratorTarget: Use a method to access the definition file.
5771f81d cmTarget: Add GetTransitiveTargetClosure method.
a6dd4990 cmTarget: Create a temporary cmTarget in checkInterfacePropertyCompatibility
b8b99cc1 cmTarget: Avoid computing languages when computing transitive targets.
01bca553 cmTarget: Move ComputeLinkInterface to the internal class.
d93e1af2 cmTarget: Extract a ComputeLinkInterfaceLibraries method.
3bcb197c cmTarget: Re-arrange the ComputeLinkInterface method.
326d07d2 cmTarget: Extract a ComputeLinkImplementationLanguages method.
21e91350 cmTarget: Change GetTransitivePropertyLinkLibraries to output targets.
f81eb49e cmTarget: Find source files on request.
84e5f5a0 cmTarget: Move SourceFileFlags to cmGeneratorTarget.
Replace calls to GetLinkInformation with calls to a method to get only
the target closure, not the link languages etc. The replaced calls
are used while evaluating generator expressions only. This makes
transitive generator expression evaluation independent from
the languages of a target. In a follow-up topic, it will be possible
to make the languages depend on generator expression evaluation, via
evaluation of the SOURCES and INTERFACE_SOURCES target properties.
Because the order of entries is not the same as the final link line,
the order of debug output is different in the RunCMake.CompatibleInterface
test, because the BOOL_PROP7 target property is evaluated first. Adjust
the test to account for that new order.
There are some corner cases in variable expansion which would be nice to
capture before going and rewriting the variable expansion code. The
majority of these are related to configuring files and strings with '@'
in them in conjunction with @ONLY being specified. Another is testing
for '(' usage inside of ENV variable references based on whether it is
quoted or not.
This has to be tested separately from the invalid_signature test because
target sources are evaluate at a later time, and earlier errors in the
invalid_signature test cause early exit.
Enable the C and CXX languages only in the test cases that really need
them. In the failure cases we do not get far enough to really use the
languages, so skip enabling them.
41d2f2c4 write_basic_package_version_file: use PROJECT_VERSION
7e142c5a project: Manage VERSION variables
16d040c9 project: Add optional LANGUAGES keyword
00007dcc Help: Format project command and variable documentation
Teach the project() command to set variables
{PROJECT,<PROJECT-NAME>}_VERSION{,_MAJOR,_MINOR,_PATCH,_TWEAK}
holding the project version number and its components. Add project()
command option "VERSION" to specify the version explicitly, and default
to the empty string when it is not given.
Since this clears variables when no VERSION is given, this may change
behavior for existing projects that set the version variables themselves
prior to calling project(). Add policy CMP0048 for compatibility.
Suggested-by: Alex Neundorf <neundorf@kde.org>
Teach the project() command to recognize an optional "LANGUAGES"
keyword after the project name and prior to the list of languages.
Do not allow multiple copies of the keyword. If the keyword is
specified and no languages are listed, imply NONE.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
Define a new 'CMAKE_CONFIGURE_DEPENDS' directory property that projects
can use to specify input files to the CMake configuration process.
Extend the RunCMake.Configure test to verify that the build system
re-runs CMake when this input changes.
Extend the RunCMake.Configure with a case to verify that the CMake
configuration process does not immediately re-run the first time that
the generated build system is invoked.
The logic added by commit ffc0b5e4 (Overwrite the symlink if it already
exists, 2007-02-15) does not recognize and remove existing broken links
before replacing them. Improve the logic to remove any existing
destination file or link (but not directory). On failure, report an
error message explaining why the existing path could not be removed or
the new one could not be created.
Add a RunCMake.CommandLine test to cover 'cmake -E' cases. Start with
test cases covering 'cmake -E create_symlink' behavior on UNIX platforms.
Add a 'run_cmake_command' function that can be used by tests to run a
given command-line and check the results rather than always running a
CMake configuration process. This can be used in the future to test
'cmake -E' for example.
73e9340 get_target_property: Error on non-existent target.
ab9f58f FindQt4: Ensure target exists before calling get_target_property.
37ebeb9 FindQt4: Fix use of get_target_property to use actual target name.
6aabb6a Genex: Use case-sensitive comparison for COMPILER_ID.
5bb53f6 cmTarget: Deprecate COMPILE_DEFINITIONS_ properties with a policy.
This is consistent with other similar expressions such as PLATFORM_ID,
and makes the CONFIGURATION expression obsolete.
Fix an off-by-one error in
GeneratorExpressionContent::EvaluateParameters exposed by a unit test.
Remove the test for 'bad' nullary use of $<CONFIG>.
Add a unit test to verify that $<CONFIG> and $<CONFIGURATION> have
the same value.
As a new feature it does not need to participate in CMP0024.
Store cmExportBuildFileGenerator instances which correspond to the
export(EXPORT) signature in a second map which does not own the
pointers. This avoids the need to add cmExportBuildFileGenerator
and dependencies to the bootstrap system.
Test that it is an error to read a number-compatible property to
determine the link implementation. An alternative would be to
consider the value to be "0", however, that is too arbitrary
given the use-cases of this feature. Values from this feature may
be used in setting a define, where "0" may have special or invalid
meaning and should be explicit.
If the dependent target sets the property to boolean false, ensure
that that appears in the debug report. Previously, the report
output contained whether the property was consistent among dependencies,
displaying 'TRUE', instead of the content of the property, which may
be 'FALSE'.
Return a std::pair from the consistentProperty method. This makes
it possible to make the return value for string types easier to
reason about. The return value of consistentProperty was previously
set to an empty static string to emulate a 'true' value for the caller
in commit 816b4a8a (cmTarget: Make consistentProperty
return consistent content., 2013-10-22). The pair makes the
consistency result properly typed.
Don't refer to 'both', but a 'mixture'. List all compatible interface
property types possible.
Add another test for a mixture of three compatibilities.
Teach the export command to handle export sets defined by invocations
of install(TARGETS ... EXPORT foo). This makes maintenance of targets
exported to both the build tree and install tree trivial.
The INTERFACE_LIBRARY type does not have any LOCATION at all, so
return early from GetMappedConfig. GetMappedConfig is called from
two locations, one of which already pre-checks the INTERFACE_LIBRARY
case. Remove that pre-check and handle that case inside the method
instead.
Revert the origin-tracking infrastructure from commit 98093c45 (QtAutoUic:
Add INTERFACE_AUTOUIC_OPTIONS target property., 2013-11-20). Use the
compatibility-tracking for compatible strings instead.
If two different dependencies require different AUTOUIC_OPTIONS,
cmake will now appropriately issue an error.
Commit 66b290e7 (export(): Process the export() command at generate
time., 2012-10-06 ) refactored export() so that it could evaluate
strings at generate-time. This was intended for evaluating target
properties, but that commit also removed a check for target
existence at configure-time. Restore that check and add a test for
this case.
5838aba Export: Report error on relative include with genex.
7a3e45b Export: Prefix relative items with genexes in INSTALL_INTERFACE.
f088a32 Export: Process INSTALL_INTERFACE in INCLUDES DESTINATION.
9eedc85 Export: Process relative includes after genex evaluation.
80790f3 Export: Test existing behavior of exporting includes with genexes.
38afc82 target_include_directories: Allow relative path with genex
Diagnostics which check the sanity of exported include paths
previously skipped over any path containing a generator expression.
Introduce a policy to issue an error message in such cases.
The export files created in the OLD behavior are not usable, because
they contain relative paths or paths to the source or build location
which are not suitable for use on installation. CMake will report an
error on import.
In code such as
install(TARGETS ...
INCLUDES DESTINATION $<FOO>include
)
the generator expressions are evaluated at generate-time. Delay
determining whether each entry is a relative path until after
the generator expressions are evaluated. Such relative paths
are based relative to the CMAKE_INSTALL_PREFIX.
4cce44b Help: Document the CMAKE_MAKE_PROGRAM variable in more detail
558c74d VS: Switch to internal CMAKE_MAKE_PROGRAM lookup by generators
5229f2d Tests: Do not use an explicit make program for VS generators
72dd738 Tests: Fix MFC test heuristic for empty CMAKE_TEST_MAKEPROGRAM
fd6076d Tests: Pass CMAKE_MAKE_PROGRAM instead of --build-makeprogram
68031ab Tests: Configure SubProject-Stage2 test more robustly
003d10c Tests: Simplify VSExcludeFromDefaultBuild configuration
e47d934 Tests: Simplify VSProjectInSubdir configuration
e965cb1 Tests: Simplify CTest.BuildCommand.ProjectInSubdir configuration
72bf255 Tests: Pass --build-options to every test
4d1d772 ctest: Teach --build-options to allow zero options
96966b5 ctest: Make the --build-makeprogram optional for --build-and-test
91a0211 Simplify some calls to cmGlobalGenerator::Build
123a060 Teach GenerateBuildCommand to find its own make program
5f5c92b VS: Add internal APIs to find MSBuild, devenv/VCExpress, and msdev
4ac75fd Prefer CMAKE_MAKE_PROGRAM over CMAKE_BUILD_TOOL (#14548)
...
Teach add_custom_target to check the policy too. Extend the policy to
disallow reserved target names that we use for builtin targets like
"all".
Extend the RunCMake.CMP0037 test to cover these cases.
Historically these were both added for the Makefile and Visual Studio
generators, respectively. Later the VS generators started using the
CMAKE_MAKE_PROGRAM cache entry to find the IDE build tool, and the
CMAKE_BUILD_TOOL was simply set as an alias.
Fix the documentation to explain that CMAKE_MAKE_PROGRAM is the modern
variable and that CMAKE_BUILD_TOOL is the compatibility alias, not the
other way around. Replace uses of CMAKE_BUILD_TOOL with
CMAKE_MAKE_PROGRAM in CMake-provided modules. Nothing needs to lookup
CMAKE_BUILD_TOOL in the cache, so simply set it as a normal variable.
Re-implement the build_command() command to use "cmake --build" instead
of generating a native build tool invocation directly. This command
will internally invoke the proper native build tool.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It will also allow us to later teach CMake to
delay the decision about which build tool to invoke until after the
project build system is generated to disk. For example, on Visual
Studio 10 and above the preferred command-line tool is MSBuild, but we
need to fall back to devenv if the .sln has Intel Fortran .vfproj files.
bf755c7 set: Add unit tests for set/unset PARENT_SCOPE
bc280f1 set: Fix handling of empty value with PARENT_SCOPE
20afbd5 set: Handle value-less PARENT_SCOPE explicitly
Since commit 7d47c693 (Drop compatibility with CMake < 2.4, 2013-10-08)
we no longer need to use the configure_file IMMEDIATE option to support
compatibility modes less than 2.0.
Allow ExternalData_URL_TEMPLATES to be empty if a value for
ExternalData_OBJECT_STORES is provided. Assume in this use case that
the object stores will already contain all needed objects. Extend the
Module.ExternalData test to cover this case (all objects in stores).
Extend the RunCMake.ExternalData test to cover the non-failure message
case when stores are provided without URL templates.
Split the test cases covering spaces and colons into separate units.
Run the space cases everywhere. Disable the colon cases where they
are known to fail. This approach increases platform coverage for the
test and makes the known-failure logic as local as possible.
No Makefile generator on Windows can generate targets with ':'
in their name because the CMakeFiles/<target>.dir directory cannot
be created. Skip this part of the test on all Windows Make tools.
Commit 239b0c6b (Don't add invalid content to static lib
INTERFACE_LINK_LIBRARIES., 2013-10-20) extended a test which
excercised the logic of the LINK_ONLY generator expression.
Commit ef10b87c (CMP0022: Plain target_link_libraries must populate
link interface, 2013-11-02) removed the instance of LINK_ONLY which
was excercised by that test.
Add a new test which excercises the other instance of LINK_ONLY by
setting the CMP0022 policy to NEW and consuming the contents of the
INTERFACE_LINK_LIBRARIES target property.
Resolve conflict in Source/cmTarget.cxx by integrating the changes to
the internal copy constructor from both sides. Also resolve a logical
conflict by dropping the special case for INTERFACE_LIBRARY targets.
Since cmTarget::SetMakefile already forces CMP0022 to NEW for such
targets we need no special handling.
Resolve conflict in Source/cmTargetLinkLibrariesCommand.h by dropping
the documentation change. We will make the same change in the new
location of the same documentation in a separate commit.
Resolve conflicts in
Tests/RunCMake/CMP0022/CMP0022-WARN-empty-old-stderr.txt
Tests/RunCMake/CMP0022/RunCMakeTest.cmake
by taking the side from the 'policy-CMP0022-fixes' branch.
Since cmTarget::ComputeLinkInterface is called separately for each
"head" target that links a target, the warning we produce when
CMP0022 is not set could be repeated. Add explicit logic to allow
the warning to appear at most once. Multiple copies of the warning
for the same target are almost always identical and therefore
redundant. In the rare case that two copies of the warning are
different, the second can appear in a future run after the first
is fixed.
When cmExportFileGenerator::SetImportLinkInterface exports the old
LINK_INTERFACE_LIBRARIES property values it skips doing so for
non-linkable targets because target->GetLinkInterface returns NULL for
such targets.
Since cmExportFileGenerator::PopulateInterfaceLinkLibrariesProperty
looks at the INTERFACE_LINK_LIBRARIES property directly instead of using
the computed link interface, teach it to skip exporting the property if
target->IsLinkable returns false.
Extend the RunCMake.CMP0022 test with a case covering this. Simply
export an executable target that links to a library that is not
exported.
The CMP0022 NEW behavior is that the INTERFACE_LINK_LIBRARIES property
exactly defines the link interface. The plain target_link_libraries
signature says linking is transitive by default, so it should populate
the property.
Teach the target_link_libraries plain signature to populate the
INTERFACE_LINK_LIBRARIES regardless of the CMP0022 setting. Refactor
the cmTarget::ComputeLinkInterface checks that warn when the policy is
not set to compare the new property to either the explicitly set old
link interface properties or the link implementation fallback for all
linkable target types, not just static libraries.
This fixes a regression in 2.8.12.0 that caused target_link_libraries to
not implement transitive linking in the plain signature once the policy
CMP0022 is set to NEW.
Teach cmGlobalGenerator::CheckTargets to include OBJECT_LIBRARY targets
in the check for source file existence.
Extend the RunCMake.ObjectLibrary test to cover this case.
Teach the cmGeneratorExpressionEvaluator filesystem artifact logic
to reject OBJECT_LIBRARY targets since they have no main artifact.
Without the explicit rejection evaluation falls through to an
internal CMake error message in cmTarget::GetOutputInfo.
Extend the RunCMake.GeneratorExpression test to cover these cases.
In certain scenarios, it is preferable to keep a 'dirty' install prefix
than to clear it, and to expect that content will not be found there.
Add a CMAKE_FIND_NO_INSTALL_PREFIX variable that can be set to disable
searching the install prefix.
Bracket arguments recorded in command invocations inside foreach,
function, and macro blocks should not have any replacements done when
the arguments are replayed later. Teach the RunCMake.Syntax test to
cover these cases.
Add an Escape1 test case covering \-escape cases inside bracket, quoted,
and unquoted arguments. Also cover comments immediately after quoted
and unquoted arguments on lines containing \# escapes.
3e04946 Require CMAKE_<LANG>_COMPILER to be found as a full path
6007f7c CMakeDetermineCompilerId: Always use compiler detected from IDE
332771c CMakeDetermine*Compiler: Remove temporary cache entry
All generators now support detection of the full path to the compiler, so
require it to be so. This will allow CMake<LANG>Information.cmake and
other logic to assume the full path to the compiler tool is available.
The Makefile generators already rejected CMAKE_<LANG>_COMPILER values
that did not name an existing compiler. Extend this error message to
all generators, make it occur as early as possible, and improve the
message with advice about how to set the compiler. If the full path to
the compiler is not known, finish enabling languages with a fatal error
so configuration does not continue.
For now, allow the RC language compiler to not be a full path. Later we
will need to detect the full path to "rc" under the VS IDE.
Add a RunCMake.CompilerNotFound test to cover failure cases.
Fix the RunCMake.CompilerChange test EmptyCompiler case to work
when configuration does not continue past enable_language.
Only valid target names or generator expressions may appear in
the target field of a LINK_ONLY expression.
Other content like link flags should still be added to that property
(wrapped in config-specific generator expressions), but not wrapped
in LINK_ONLY. Otherwise undue warnings would be issued for the
policy CMP0022.
The LINK_ONLY expression only has an effect for actual target
names anyway, so there is no logical deficit.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
It was a subtest of the RunCMake.ObjectLibrary test. However, we need
to test a build with ExternalProject after running CMake, which RunCMake tests
do not do.
Teach the CMake language lexer to treat the \-LF pair terminating a
line ending in an odd number of backslashes inside a quoted argument
as a continuation. Drop the pair from the returned quoted argument
token text. This will allow long lines inside quoted argument
strings to be divided across multiple lines in the source file.
It will also allow quoted argument text to start on the line after
the opening quote. For example, the code:
set(x "\
...")
sets variable "x" to the value "..." with no opening newline.
Previously an odd number of backslashes at the end of a line inside
a quoted argument would put a \-LF pair (or a \-CR pair) literally
in the argument. Then the command-argument evaluator would complain
that the \-escape sequence is invalid. Therefore this syntax is
available to use without changing behavior of valid existing code.
Teach the RunCMake.Syntax test to cover cases of quoted arguments
with lines ending in \, \\, and \\\. Odd counts are continuations.
Brad King
Matt McCormick
Bill Hoffman
Domen Vrankar
Gregor Jasny
Stephen Kelly
Raffi Enficiaud
Nils Gladitz
Zack Galbreath
Justin Borodinsky
Ben Boeckel
Robert Maynard
Clinton Stimpson
Ruslan Baratov
Peter Collingbourne
Daniele E. Domenichelli
Rolf Eike Beer
Sylvain Joubert