25d7399272
Remove WILL_FAIL property from BadExe test, since CTest was returning 0. Replaced with a pass regex.
2009-12-07 10:15:34 -05:00
f30c82f370
Added a unit test for running a test command which exists but is not an executable, because it previously caused the outer ctest process to fail.
2009-12-07 09:34:05 -05:00
0b38bb4c53
Fix issue #2336 - honor the -C arg to ctest. Honor it for all stages of running -D dashboards from the command line and running ctest_configure, ctest_build and ctest_test commands in -S scripts. Also, allow a script to change it by setting the CTEST_CONFIGURATION_TYPE variable: allows for multiple configuration build/test cycles within one script. Add a new signature for the cmake command build_command that accepts CONFIGURATION as one argument. The original build_command signature is still there, but now marked as deprecated in the documentation. Of course... also add CTestConfig tests to verify that -C is honored for -D dashboards and -S scripts.
2009-12-04 12:09:01 -05:00
7380d3ab7c
Always use a configuration for CTestTestTimeout
...
This test requires that the dashboard script it drives be invoked with
"ctest -C <config> -S ...". We create a "CTestTest_CONFIG" variable to
hold a configuration selected at test time. We use the configuration
given to the outer CTest, if any, and then default to either Debug or
the CMAKE_BUILD_TYPE.
2009-12-01 09:12:07 -05:00
88eefaced1
CTest: Test process tree kill on timeout
...
We extend the CTestTestTimeout test to check that when a test times out
its children (grandchildren of ctest) are killed. Instead of running
the timeout executable directly, we run it through a cmake script that
redirects the timeout executable output to a file. A second test later
runs and verifies that the timeout executable was unable to complete and
write data to the log file. Only if the first inner test times out and
the second inner test passes (log is empty) does the CTestTestTimeout
test pass.
2009-11-30 16:31:28 -05:00
5152bf5639
Cleanup CMakeBuildTest in test_clean target
...
The test_clean target is supposed to remove all test build directories.
We add the build directory for CMakeBuildTest because it was missing.
2009-11-30 11:16:13 -05:00
1d6e7ed71f
Improve fake $HOME test isolation code
...
The commit "Fake $HOME to isolate tests from user" started setting $HOME
in the CTest script environment. On some platforms tests depend on some
local configuration in the home directory, such as the "cvs login" for
KWSys in CTestTest3.
In this commit we now construct a fake home dir during CMake config step
and populate it with a .cvspass file needed by the test. We also check
CTEST_NO_TEST_HOME to optionally disable the test home.
See issue #9949 .
2009-11-24 12:15:33 -05:00
bb18790397
Test CMP0015 OLD and NEW link_directories behavior
...
We create a LinkDirectory test to check that the policy OLD and NEW
behaviors work as documented. See issue #9697 .
2009-11-24 11:17:16 -05:00
1da9b54a59
BUG 9950: increase timeout for BootstrapTest to 1.5 hours
2009-11-23 10:22:09 -05:00
1412cc442e
SimpleInstall test now builds an installer package if CTEST_TEST_CPACK is ON at the Tests/CMakeLists.txt level.
2009-11-16 15:35:04 -05:00
c9c0ee4056
Change logic of ctest subdirs command to allow for absolute paths. Also added test coverage for passing absolute paths to subdirs.
2009-11-10 10:40:24 -05:00
8658fcbe24
Fix TRY_RUN cross compile test to pass consistently
2009-11-09 12:05:49 -05:00
ef84e81011
Added test coverage for TRY_RUN in cross compile mode.
2009-11-09 11:14:21 -05:00
9c12894636
Add missing depend because of registry write with complex name, they can not be done in parallel.
2009-11-03 19:13:40 -05:00
cabd917460
Fix failed submit test 'failures'... Regular expression now matches [Cc]ouldn't and [Cc]ould not.
2009-10-30 12:08:10 -04:00
dae1011d26
Fixed CTestTestRunScript
2009-10-29 12:46:00 -04:00
8ca41ca7fb
Backout RunScript test again... (debugging on faraway)
2009-10-29 10:13:35 -04:00
5075c255f7
Fix RunScript test; it should now work on all platforms
2009-10-29 10:00:28 -04:00
06b0f676ce
Increase timeout for the nightly build tests so that the poor mac nightly build on dashmacmini2 might have enough time to complete successfully. Use CMAKE_LONG_TEST_TIMEOUT instead of a hard-coded number for the test TIMEOUT property so that a calling script may adjust it by setting a higher CTEST_TEST_TIMEOUT value.
2009-10-28 15:50:40 -04:00
b5615e9c34
Increase timeout for the nightly build tests so that the poor mac nightly build on dashmacmini2 might have enough time to complete successfully. Allow for up to 3 hours. After measuring successful runs for a few weeks, perhaps we can use a lower value.
2009-10-28 15:41:52 -04:00
5eb4372001
Changed RunScript test to be in-source build safe
2009-10-28 14:11:19 -04:00
28c3d59ed9
Test per-config OUTPUT_DIRECTORY properties
...
We test (ARCHIVE|LIBRARY|RUNTIME)_OUTPUT_DIRECTORY_<CONFIG> properties
by building COnly as a subdirectory and setting the properties to put
its files in specific locations. We build an executable that verifies
the targets actually appear where expected.
2009-10-28 13:35:53 -04:00
ae1e9900fa
Add test CMakeTestBadCommandLines. Also add --graphviz arg to cmake invoked during the CPackComponents test. The purpose of each is to increase coverage of cmake.cxx.
2009-10-27 12:18:41 -04:00
20fe27cda1
Add test to enable detecting differences between generation N and N+1 of a cmake generated build tree. Theoretically, each generation run with exactly the same arguments should be identical to the previous generation... Practically, there are differences. This is a tool to help us measure those differences. For now, the test always succeeds. Eventually, we may add the code to make it fail when there are differences.
2009-10-26 16:09:27 -04:00
857b5dc9f5
Disable run_script test for now, it is failing currently on linux
2009-10-26 14:37:37 -04:00
6e3dd78b8b
Added test coverage for cmCTestRunScriptCommand
2009-10-26 13:10:46 -04:00
99697308f3
Add a ctest test to cover cmCTestBatchTestHandler. Since its behavior isn't fully defined yet, we just run it as is and don't care much about the result.
2009-10-26 09:44:08 -04:00
62f80415a9
Turn on the NSIS binary for the CPackComponents test if NSIS is found. Should increase coverage of the NSIS generator on the dash16 coverage dashboard.
2009-10-25 17:00:51 -04:00
57214662ae
Add test of all cmake -G generators. Ignore any errors from this as not all generators are expected to be usable on all machines. Help to increase coverage of the various generators and cmake.cxx itself.
2009-10-22 10:14:40 -04:00
e4897a78b9
Test OSX_ARCHITECTURES target property
...
We test the property with a project that fails to link due to an
architecture mismatch between an executable and a static library.
See issue #8725 .
2009-10-21 13:01:17 -04:00
e1458ae4ab
Add test of all available CPack generators. Add this test with the goal of increasing coverage of the cpack source code, even/especially when the underlying packager tool is not installed. The test does not fail if there is a cpack problem with a certain generator. I expect some generators will fail on every machine running a CMake dashboard.
2009-10-20 14:31:10 -04:00
78174651b6
Added a ctest add_subdirectory test which fails before my patch made earlier today.
2009-10-20 13:35:44 -04:00
402fa2ceeb
Allow test to pass even if an expected-to-fail submit claims 'Submission successful' - apparently when there is a valid HTTP_PROXY involved, our submitting to an empty drop location appears to succeed. Presumably, the proxy simply takes it like a man, and then discards it...
2009-10-16 11:47:51 -04:00
7e53bcc115
add a test which checks that cmake can build the latest stable KDE4 (kdelibs) release
...
To enable this test, the option TEST_KDE4_STABLE_BRANCH must be switched on.
It can only be switched on if CMAKE_RUN_LONG_TESTS is ON.
Then the test will only be added if Qt >= 4.5 can be found, Perl can be
found and ZLIB can be found.
Alex
2009-10-15 18:18:23 -04:00
d03c6d970f
Use LABELS in some ctest_coverage calls to increase coverage in cmCTestCoverageHandler.cxx.
2009-10-15 12:07:14 -04:00
886ae02356
Fix crash on Windows. Remove trailing white space from regex. These changes should correct all failures of the new FailedSubmit tests.
2009-10-15 07:38:51 -04:00
e3dec97333
Add another possible error message that curl might emit with an empty drop location.
2009-10-14 15:02:16 -04:00
a85ac1a734
Use macro instead of function since DASH2 continuous dashboard still uses CMake 2.4.8 to drive the dashboard. Add clarifying comments so that a future developer does not delete seemingly unused variables: they are used: inside the input to the configure_file call.
2009-10-14 14:18:47 -04:00
2137955138
Increase ctest coverage. Add tests that intentionally call ctest_submit without any drop location so that the submits fail. Call for each possible type of submit. Also use the launchers from these scripts.
2009-10-14 13:32:46 -04:00
0653286dc6
Split Borland compiler information files
...
This commit re-writes Borland compiler build rules. We split the rules
into modern <os>-<id>-<lang> information modules but share a common
macro between languages to avoid duplication.
We also address a bug in the previous rules that would build some target
types against the static Borland runtime and others against the shared
Borland runtime in one build tree. Now we always use the shared runtime
as is the default in the rules for MS tools.
2009-10-08 11:56:07 -04:00
7dcfc8d23a
Make Complex test of CMakeLib more optional
...
Previously we passed inputs to the decision to each Complex test and let
the test source decide. This commit moves the decision out of the tests
and makes it an option() in their source. This makes it possible to
build the Complex tests from outside the CMake test tree.
2009-10-07 16:11:52 -04:00
a6facbcca3
Use the correct CMake (the freshly built one) to drive the CMakeWizardTest.
2009-10-07 06:33:09 -04:00
d8efcfc787
Increase coverage. Add test of class cmakewizard. (cmake -i 'mode')
2009-10-06 13:27:13 -04:00
b4ace1cca0
Test INTERPROCEDURAL_OPTIMIZATION build feature
...
This creates an "IPO" test that builds some other tests as subdirectories
while enabling INTERPROCEDURAL_OPTIMIZATION. See issue #9615 .
2009-10-02 13:52:29 -04:00
0db2c8505e
Test use of module .def files for MS tools
...
This adds a "ModuleDefinition" test enabled when using MSVC tools. It
checks that .def files can be used to export .dll and .exe symbols and
create corresponding .lib files that can be linked. See issue #9613 .
2009-09-29 16:39:43 -04:00
f321dbb17b
ENH: Added ctest test coverage for a test timeout
2009-09-29 15:18:46 -04:00
65a78ec5b8
Test support for OLD behavior of policy CMP0002
...
Policy CMP0002's OLD behavior allows duplicate non-custom targets. We
test it with a project that builds two executables of the same name by
setting CMP0002 to OLD.
2009-09-28 17:34:34 -04:00
815ec522ee
SEGFAULT does not work on watcom with ctest, so don't expect it to...
2009-09-24 14:14:23 -04:00
d33701abbb
Uncommented the dependency of CTestTestNoExe on CTestTestNoBuild so that it will work in parallel now.
2009-09-23 14:13:33 -04:00
fc921a021c
Add nightly builds for linux windows and mac.
2009-09-23 12:45:39 -04:00
Zach Mullen
David Cole
Brad King
Bill Hoffman
Alexander Neundorf