Xcode supports SDKROOT values that just name an SDK rather than
specifying the full path to it. Recognize these values and handle them.
For Xcode we just put the value directly in the generated project file.
For Makefile generators we ask xcodebuild to provide the full path to
the named SDK.
Suggested-by: Jason DiCioccio <jd@ods.org>
Simplify the search for OSX_DEVELOPER_ROOT and allow it to fail if no
"/Developer" exists. When it does exist, always find a MacOSX SDK
inside it to use as the default CMAKE_OSX_SYSROOT. Otherwise set
CMAKE_OSX_SYSROOT to empty.
Drop the last use of CMAKE_OSX_SYSROOT_DEFAULT. Replace internal
platform variable CMAKE_${lang}_HAS_ISYSROOT with a more general
CMAKE_${lang}_SYSROOT_FLAG variable. If the -isysroot flag exists and
CMAKE_OSX_SYSROOT points to an SDK (not "/") then always add it to
compiler command lines. This is already done in the Xcode IDE.
The GNU compiler information file tests for GNU >= 3.4 because earlier
versions do not have the flag. The version number test is not valid for
Clang compiler versions, but we know Clang supports the flag.
While Clang presents an almost identical interface to GNU there will be
some differences. Split the compiler information modules to allow
separate rules for Clang. Start by loading the GNU rules but leave a
place to add Clang-specific information.
Make the EXPECTED_HASH option take only a single value instead of two to
avoid handling sub-keyword arguments. This is also consistent with
URL_HASH in ExternalProject.
Some download URLs do not have the filename embedded in the url.
Add an interface to specify the local filename explicitly.
Suggested-by: James Goppert <james.goppert@gmail.com>
Use the registry entries that vsvars32.bat uses to detect the location of
MSBuild.exe in the framework directory. Invoke MSBuild with the option
/p:VisualStudioVersion=$version
so it knows from which VS version to load the system build rules. Teach
cmGlobalVisualStudio11Generator to set its ExpressEdition member using the
registry.
Clang has the same interface as GNU except that we do not need to test
for the deployment target and sysroot flags. Simply set variables
CMAKE_${lang}_HAS_ISYSROOT
CMAKE_${lang}_OSX_DEPLOYMENT_TARGET_FLAG
to true because every version of Clang available on OS X supports these
flags.
TLS has superseded SSL so rename the recently added file(DOWNLOAD) and
ExternalProject options using the newer terminology. Drop "CURLOPT"
from names because curl is an implementation detail.
This commit adds the ability to turn on and off ssl certificate
authority checking. It also adds the ability to specify a
certificate authority information file. This can be done
by setting global cmake variables CMAKE_CURLOPT_CAINFO_FILE
and or CMAKE_CURLOPT_SSL_VERIFYPEER in the project calling
ExternalProject_Add, or by passing those options to individual
ExternalProject_Add calls.
This triggered an unknown secondary bug when there is
no ABSOLUTE INSTALL file. This is fixed as well.
This is based on a fix of bug #0013468 from Viktor Dubrovsky.
...if the library file does not exist inside the .framework then do
not allow a library variable to be set to the path to the framework.
Force set it to NOTFOUND instead.
This enables CMake to create Makefiles targeting Windows CE devices.
CMake needs to be run within a cross compile command prompt and requires
a toolchain file which sets CMAKE_SYSTEM_NAME to "WindowsCE" and
optionally CMAKE_SYSTEM_VERSION.
In commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23) we
accidentally flipped the 0/1 values of MSVC_IDE. Flip them back and
teach the CheckCompilerRelatedVariables test to check the variable.
32b7c72 Merge branch 'cmake-platform-info-version' into msvc-compiler-info
f3ddfef Modernize MSVC compiler information files
485a940 VS: Simplify MSVC version reporting
32db033 VS: Remove support for "free" version 2003 tools
e5fee8a Store ABI detection results in compiler information files
3df81b4 Move CMAKE_<LANG>_COMPILER_WORKS to compiler information files
7195aca Make platform information files specific to the CMake version
Remove the old-style "Windows-cl.cmake" and its helper "cl.cmake". Load
the information through new-style "Platform/Windows-MSVC-<lang>.cmake"
files. Factor information common to C and CXX into a helper file
"Platform/Windows-MSVC.cmake" loaded from the per-language files.
Teach Windows-cl.cmake to use CMAKE_(C|CXX)_COMPILER_VERSION to set the
"MSVC##" and MSVC_VERSION variables. It no longer needs the IDE generator
to dictate the version or to detect the version by running the
command-line tool for NMake and Ninja generators. Drop configuration of
CMakeCPlatform.cmake and CMakeCXXPlatform.cmake from Windows-cl.cmake.in
because all the results it saved are now cheap to compute every time.
Drop use of cache entry CMAKE_DETERMINE_<LANG>_ABI_COMPILED and replace
it with variable CMAKE_<LANG>_ABI_COMPILED. Since the grandparent
commit this test result is specific to the version of CMake. Store it
in the version-specific compiler information files instead of
CMakeCache.txt so testing can be re-done to meet the requirements of the
current version of CMake even if another version of CMake was already
used to configure the build tree.
403ead6 Document CMAKE_<LANG>_COMPILER_(ID|VERSION) values
8be51f6 Test variables CMAKE_(C|CXX|Fortran)_COMPILER(|_ID|_VERSION)
ec22a9b Cleanly enable a language in multiple subdirectories
66cb335 VS: Detect the compiler id and tool location
89595d6 VS10: Define CMAKE_VS_PLATFORM_TOOLSET variable
965a69d Xcode: Detect the compiler id and tool location
9a9e1ee CMakeDetermineCompilerId: Prepare to detect IDE compiler id
b8b5c83 Re-order C/C++/Fortran compiler determination logic
e9bc502 Detect Analog VisualDSP++ compiler version with its id
cca386b Detect Cray compiler version with its id
622d9a7 Detect SDCC compiler version with its id
4ad7fa6 Detect Comeau compiler version with its id
952651c Detect TI compiler version with its id
74c57d9 Detect PathScale compiler version with its id
707aefd Detect Compaq compiler version with its id
Since the parent commit this test result is specific to the version of
CMake. Store it in the version-specific compiler information files
instead of CMakeCache.txt so testing can be re-done to meet the
requirements of the current version of CMake even if another version of
CMake was already used to configure the build tree.
At the top of a build tree we configure inside the CMakeFiles directory
files such as "CMakeSystem.cmake" and "CMake<lang>Compiler.cmake" to
save information detected about the system and compilers in use. The
method of detection and the exact results store varies across CMake
versions as things improve. This leads to problems when loading files
configured by a different version of CMake. Previously we ignored such
existing files only if the major.minor part of the CMake version
component changed, and depended on the CMakeCache.txt to tell us the
last version of CMake that wrote the files. This led to problems if the
user deletes the CMakeCache.txt or we add required information to the
files in a patch-level release of CMake (still a "feature point" release
by modern CMake versioning convention).
Ensure that we always have version-consistent platform information files
by storing them in a subdirectory named with the CMake version. Every
version of CMake will do its own system and compiler identification
checks even when a build tree has already been configured by another
version of CMake. Stored results will not clobber those from other
versions of CMake which may be run again on the same tree in the future.
Loaded results will match what the system and language modules expect.
Rename the undocumented variable CMAKE_PLATFORM_ROOT_BIN to
CMAKE_PLATFORM_INFO_DIR to clarify its purpose. The new variable points
at the version-specific directory while the old variable did not.
Several more recent Visual Studio Express editions are now available and
they support debug builds. Simplify our VS platform files by removing
support for these old tools. If anyone still uses them we can restore
support with a more modern way to test for them.
Configure a hand-generated Visual Studio project to build the compiler id
source file since we cannot run the compiler command-line tool directly.
Add a post-build command to print out the full path to the compiler tool.
Parse the full path to the compiler tool from the build output.
Configure a hand-generated Xcode project to build the compiler id source
file since we cannot run the compiler command-line tool directly. Add a
post-build shell script phase to print out the compiler toolset build
setting. Run xcodebuild to compile the identification binary. Parse
the full path to the compiler tool from the xcodebuild output.
Teach CMAKE_DETERMINE_COMPILER_ID to check for variable
CMAKE_${lang}_COMPILER_ID_TOOL after CMAKE_DETERMINE_COMPILER_ID_BUILD
to use as CMAKE_${lang}_COMPILER since it will not be known until after
the IDE runs.
In CMAKE_DETERMINE_COMPILER_ID_BUILD prepare a cascading "if" so we can
use a generator-specific method to compile the identification source
file. Leave "if(0)" as a placeholder for now and put the direct
compiler invocation in "else()". After running the compiler to build
the compiler identification source we file(GLOB) the list of output
files as candidates for extracting the compiler information. An IDE may
create directories, so exclude exclude directories from this list.
Re-organize CMakeDetermine(C|CXX|Fortran)Compiler.cmake to search for
the compiler command-line tool only under generators for which it makes
sense. For the Visual Studio generators we do not expect to find the
compiler tool from the environment, nor would we use the result anyway.
Furthermore, set CMAKE_${lang}_COMPILER_ID_TEST_FLAGS only when it has a
chance to be used. Extract _CMAKE_TOOLCHAIN_LOCATION from the compiler
path after running the compiler id step so in the future that step can
help find the path to the compiler.
Commit 4be67837 (read less from version headers into variables,
2012-08-19) switched from file(READ) and string(REGEX MATCHALL) to just
file(STRINGS) to extract the list of resource <file> entries. However,
the latter extracts entire lines that match the regex, not just the part
that matches the regex, so the subsequent string(REGEX REPLACE) fails to
match and replace anything. Return to the original parsing logic but
replace file(READ) with file(STRINGS) to load a minimal part of the file
before using string(REGEX MATCHALL) as before.
Added a new CUDA variable for specifying the CUDA_HOST_COMPILER. This will allow users to
be able to specify which host compiler to use for invoking NVCC with. By default it will
use the compiler used for host compilation. This is convenient for when you want to
specify a different compiler than the default compiler. You end up using the same
compiler for both the NVCC compilation and the host compilation instead of using the
default compiler in the path for NVCC.
a3815e6 -fix line length
9110d0e Eclipse on OSX: improve handling of framework include dirs (#13367)
d97b385 Eclipse on OSX: fix handling of framework include dirs (#13464)
Instead of reading the whole file using file(READ) and later matching on the
whole file use file(STRINGS ... REGEX) to get only those lines we are
interested in at all. This will make the list much smaller (good for debugging)
and also the regular expressions will need to match on much smaller strings.
Also unset the content variables once they are not used anymore.
The Spanish language MFC localization dll changed names from
VS 9 to 10. Use the correct file name ending with "esn.dll"
instead of the now non-existent one ending with "esp.dll"
Also, add the existing, but missing from our rules until now,
Russian language module.
Alphabetize the list while we're at it for easier reading in
the future.
We may want to consider adding some file(GLOB code here to
minimize the risk of missing files added in future versions
of VS.
On OSX, the output from gcc looks like this:
/usr/include/c++/4.2.1
/usr/include/c++/4.2.1/i686-apple-darwin10/x86_64
/usr/include/c++/4.2.1/backward
/usr/lib/gcc/i686-apple-darwin10/4.2.1/include
/usr/include
/System/Library/Frameworks (framework directory)
/Library/Frameworks (framework directory)
End of search list.
The "(framework directory)" part needs to be removed so that Eclipse handles it properly
Alex
Remove old search paths that aren't needed.
Keep using PATHS instead of HINTS because a Windows machine may have
a different Qt in its PATH and putting QTDIR and the registry entry
ahead of PATH could cause apps to fail when run.
Add options HG_REPOSITORY and HG_TAG to specify an external project
hosted in a Mercurial repository. Teach ExternalProject to clone the
repository and update from it. Extend the ExternalProject test to try a
Mercurial repository when hg is available.
Previously, it was inconsistent in that some platforms/compilers
had this flag for the RelWithDebInfo configuration and some didn't.
This fixes issue #11366.
Since commit 571dc748 (Recognize Clang C and C++ compilers, 2010-05-17)
we recognize Clang C and C++ support. Add Compiler/Clang-ASM.cmake to
enable use of Clang for ASM too. Also teach Assembler test to try Clang
as an assembler.
Suggested-by: Tobias Pape <tobiaspape@gmail.com>
Especially remove "lib64" when the given paths are all Unix ones and "lib" is
also explicitely given. In that case CMake will search "lib64" anyway for
platforms where it is known to make sense.
Instead of directly passing $ENV{SOMEVAR} to a find_* call pass in ENV SOMEVAR.
This will make sure the paths will get correctly handled through different
platforms, especially on Windows.
Also fixes one place where paths with windows delimiters (\) were hardcoded to
use forward slashes.
This was missed by commit 7bbaa428 (Remove trailing whitespace from most
CMake and C/C++ code, 2012-08-13) which only removed trailing spaces,
not TABs.
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the
block. This is no longer the preferred style.
Run the following shell code:
for c in else endif endforeach endfunction endmacro endwhile; do
echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
egrep -z -v 'Tests/CMakeTests/While-Endwhile-' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
7e58e5b Prefer generic system compilers by default for C, C++, and Fortran
796e337 Factor common code out of CMakeDetermine(ASM|C|CXX|Fortran)Compiler
b708f1a CMakeDetermine(C|CXX)Compiler: Consider Clang compilers
Since commit c198730b (Detect Watcom compiler version with its id,
2011-12-07) the CMAKE_(C|CXX)_COMPILER_VERSION variables are set for the
Watcom compiler. Use these in Windows-wcl386.cmake to set the old
WATCOM1* version variables. This avoids using the old EXECUTE_PROCESS
command which failed due to extra quotes anyway.
This fix bug #0013451. The bug prevents theorerically relocatable RPM package
to be installed properly.
Signed-off-by: Eric NOULARD <eric.noulard@gmail.com>
Teach CMake to prefer the system default compiler automatically when no
compiler is specified. By default use "cc" for C, "CC" for C++, and
"f95" for Fortran. Load a new Platform/<os>-<lang>.cmake module to
allow each platform to specify for each language its system compiler
name(s) and/or exclude certain names.
Create Platform/(CYGWIN|Darwin|Linux|Windows)-CXX.cmake modules to
specify "c++" as the system C++ compiler name for these platforms. On
systems that use case-insensitive filesystems exclude C++ compiler names
that are distinguished from C compiler names only by case.
This will change the default compiler selection for existing build
scripts that do not specify a compiler when run on machines with
separate system and GNU compilers both installed in the PATH. We do not
make this change in default behavior lightly. However:
(1) If a given build really needs specific compilers one should specify
them explicitly e.g. by setting CC, CXX, and FC in the environment.
(2) The motivating case is to prefer the system Clang on newer OS X
systems over the older GNU compilers typically also installed. On
such systems the names "cc" and "c++" link to Clang. This is the
first platform known to CMake on which "c++" is not a GNU compiler.
The old behavior selected "gcc" for C and "c++" C++ and therefore
chooses GNU for C and Clang for C++ by default. The new behavior
selects GNU or Clang consistently for both languages on older or
newer OS X systems, respectively.
(3) Other than the motivating OS X case the conditions under which the
behavior changes do not tend to exist in default OS installations.
They typically occur only on non-GNU systems with manually-installed
GNU compilers.
(4) The consequences of the new behavior are not dire. At worst the
project fails to compile with the system compiler when it previously
worked with the non-system GNU compiler. Such failure is easy to
work around (see #1).
In short this change creates a more sensible default behavior everywhere
and fixes poor default behavior on a widely-used platform at the cost of
a modest change in behavior in less-common conditions.
The compiler candidate list selection and search code for C, C++, ASM,
and Fortran languages was duplicated across four modules. To look for
compilers adjacent to already-enabled languages the C and CXX modules
each used _CMAKE_USER_(C|CXX)_COMPILER_PATH and the ASM module used
_CMAKE_TOOLCHAIN_LOCATION. Since commit 4debb7ac (Bias Fortran compiler
search with C/C++ compilers, 2009-09-09) CMake prefers Fortran compilers
matching the vendor and directory of an enabled C or C++ compiler.
Factor out the common functionality among the four languages into a new
CMakeDetermineCompiler module. Generalize the Fortran implementation so
that all languages may each use the vendor and directory of the other
languages that have already been enabled. For now do not list any
vendor-specific names for C, C++, or ASM so that only the directory
preference is used for these languages (existing behavior).
Look for "clang" or "clang++" compiler executables so Clang will be used
when it is the only compiler available. Prefer them last to avoid
changing compiler default preferences for existing scripts.
In case that any of the input variables that hold the library names contains
more than just a single library the "debug" or "optimized" keywords were only
prepended to the first item, making all other libs appear in all
configurations. Just treat both input variables as lists.
Thanks to Philipp Berger <newsletters@philippberger.de> for pointing me at
this.
4bb94c9 Ninja: sysconf() is declared in unistd.h
bb36759 Ninja: enable response file support on Mac (length 262144)
3a2c8e8 Ninja: disable work around when linking with mingw
3856e66 Ninja: error on missing rspfile_content
8c1e35c Ninja: remove some unused default arguments
7f647cf Ninja: also write link libraries to rsp file
The work around is only needed by older GCCs (only testet 4.4/4.7)
Ninja is very new so chances are high that there is also a new mingw.
Use slashes in link rsp file, because ar.exe can't handle \.
Among other flags this sets RPATH flags correctly so that CMake knows
how to treat CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH for the ASM language.
This is the GNU compiler equivalent to commit a0bab7ae (Add ASM platform
information for XL compiler on AIX, 2011-03-02), made for XL.
Fixes a problem where when specifying a version number without the REQUIRED
parameter, Boost_FOUND would be true on the first configure but false on
subsequent configures.
0331a5a Qt4Macros: add some quotes to prevent damage from spaces in the paths
f46903b Qt4Macros: improve basename extraction in QT4_ADD_DBUS_INTERFACES
aa841ae FindQt4: extend documentation
-convert the filename to lowercase before the extraction, this allows this to
work even if the filename as uppercase ".XML" extension
-use get_filename_component(... NAME) to strip the path
eb410e8 Ninja: disable cldeps for bcc32, it's too old, and ninja would also not build
5ead31d Ninja: try work around for bcc32 bug
1333b57 Ninja: build server fixes
9081e3a remove warning about unused parameter
f430bea Ninja: maybe this fixes the bcc32 build
f2c1288 Ninja: msvc6 for-scoping
44b9bbc Ninja: build with old msvc versions
57156a5 Ninja: build server fixes
f1abdce Ninja: some bytes of the rc files couldn't be piped correctly
2de963d Ninja: don't remove space between command and parameters
50b6f33 Ninja: build cmcldeps with mingw
c05653e Ninja: try to make GetProcessId visible
ab245ff Ninja: but cl supports /nologo ...
bf58e9a Ninja: no /nologo option in old rc.exe
2fb07fc Ninja: Eclipse and KDevelop fixes for ninja
518c065 Ninja: don't pollute build dir with preprocessed rc files
...
Add "LinearMath_Debug" to the list of names to search for
BULLET_MATH_LIBRARY_DEBUG. The _Debug name is present in all other
lines already. Now the script manages to find all debug&release
libraries on my system.
bd34963 Refactor generation of shared library flags
55d7aa4 Add platform variable for flags specific to shared libraries
31d7a0f Add platform variables for position independent code flags
Store in new platform variables
CMAKE_${lang}_COMPILE_OPTIONS_PIC
CMAKE_${lang}_COMPILE_OPTIONS_PIE
flags for position independent code generation.
In almost all cases, this means duplication of the
CMAKE_SHARED_LIBRARY_${lang}_FLAGS for the _PIC case and using the
assumed pie equivalent for the _PIE case. Note that the GNU compiler
has supported -fPIE since 3.4 and that there is no -fPIC on GNU for
Windows or Cygwin.
There is a possibility that the _PIE variables are not correct.
However, as there is no backwards compatibility to be concerned about
(as the POSITION_INDEPENDENT_CODE property is not used anywhere yet),
the current state suffices.
cmcldeps wraps cl and adds /showInclude before calling cl.
It parses the output of cl for used headers, drops system
headers and writes them to a GCC like dependency file.
cmcldeps uses ATM ninja code for process handling,
but could be ported later to SystemTools.
TODO: Why needs ninja multiple calls in the BuildDepends test?
The GnuWin32 "bzip2" installer stores in the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\GnuWin32\Bzip2
an "InstallPath" value. Use this entry as a search location.
3545645 Exclude the CompileCommandOutput test on WIN32.
fbaddf4 Escape the source file to be compiled if required.
db839be Make the CMAKE_EXPORT_COMPILE_COMMANDS option work with Ninja.
8778357 Add newline to the output.
2c04bc0 Move the EscapeJSON method to a sharable location.
The default for `CMAKE_FIND_FRAMEWORK`, defined in `Darwin.cmake` and
`Darwin-icc.cmake`, is now guarded so that it will not override command line
arguments passed by users.
Similarly for `CMAKE_FIND_APPBUNDLE`
If on APPLE, the phonon backend plugin is set to phonon_qt7. If on WIN32, the phonon backend plugin is set to phonon_ds9. I did not add any for generic UNIXes as they could have a whole host of things. A more comprehensive script would actually attempt to detect which phonon plugins were installed. However, this is a simple fix for now that will work for most people.
Using the QT4_ADD_RESOURCES() macro required the resource file to exist
already for dependency scanning. This prevented the use of resource
files that are generated by cmake because it needs the file before
resolving the dependency. This patch adds support for generated
resource files by not scanning the resource file for dependencies if it
doesn't exist yet. The add_custom_command() to generate the resource
file should add the dependencies on the files used by the resource file.
14b213c add test for #13241: empty SIZEOF_VOIDP in write_basic_package_version_file
00ae36f write_basic_package_version_file() now works with unset CMAKE_SIZEOF_VOID_P
Fix the build command when Ninja is the CMake Generator, but the
external project is created for a project that does not use CMake but
does use "make".
Until now an unnamed component was always named "Unspecified".
Now this name is taken from the new cmake variable CMAKE_INSTALL_DEFAULT_COMPONENT_NAME,
which is initialized to "Unspecified". But it can now be set to something
project-specific, per directory
Alex
Add a boolean target property NO_SONAME which may be used to disable
soname for the specified shared library or module even if the platform
supports it. This property should be useful for private shared
libraries or various plugins which live in private directories and have
not been designed to be found or loaded globally.
Replace references to <CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG> and
hard-coded -install_name flags with a conditional <SONAME_FLAG> which is
expanded to the value of the CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG
definition as long as soname supports is enabled for the target in
question. Keep expanding CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG in
rules in case third party projects still use it. Such projects would
not yet use NO_SONAME so the adjacent <TARGET_SONAME> will always be
expanded. Make <TARGET_INSTALLNAME_DIR> NO_SONAME aware as well. Since
-install_name is soname on OS X, this should not be a problem if this
variable is expanded only if soname is enabled.
The Ninja generator performs rule variable substitution only once
globally per rule to put its own placeholders. Final substitution is
performed by ninja at build time. Therefore we cannot conditionally
replace the soname placeholders on a per-target basis. Rather than
omitting $SONAME from rules.ninja, simply do not write its contents for
targets which have NO_SONAME. Since 3 variables are affected by
NO_SONAME ($SONAME, $SONAME_FLAG, $INSTALLNAME_DIR), set them only if
soname is enabled.
By tracking a stamp file within the git clone script itself.
Avoids a 2nd git clone operation after switching from Debug
to Release builds in Visual Studio, or vice-versa.
Add "private/internal-use-only" function _ep_get_step_stampfile
to get the name of the stamp file for a given step.
The functionality provided by this commit should be identical
to its parent commit.
In the case of git, only track the repository in the
repository info dependency tracking file. Not the tag.
The download step should only re-run if the repository changes.
The download step should NOT re-run if the tag changes.
The update step is an 'always' re-running step, and so should
already re-run, unless it's been eliminated by use of
UPDATE_COMMAND ""
Use of the deprecated option with Intel 2011 produces
icl: command line remark #10010: option '/GX' is deprecated and will
be removed in a future release. See '/help deprecated'
so use its replacement option which has been supported for several
older versions anyway.
If CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL is set to ON the NSIS installer will look for a previous installed version and ask the user about uninstall.
Commit f67139ae added running a verify script in between running
the download and extract scripts. Since then, it has always been
missing the COMMAND keyword added in this commit.
It worked anyway (semi-accidentally) by running a command line like:
cmake -P script1.cmake cmake -P script2.cmake
CMake, when running -P scripts on the command line, runs them in order,
and apparently ignores spurious arguments in between (the middle "cmake"
in the above example) and so, all appeared to work as intended.
This commit adds the missing keyword and the commands that run are
now two separate sequential cmake invocations like:
cmake -P script1.cmake
cmake -P script2.cmake
...which was the original intent of commit f67139ae
Allows custom NSIS commands to run prior to any installation
actions. Projects that need to run an uninstaller first,
especially one from a non-NSIS previous revision of a project
that is NOW using CPack and NSIS, may do so by putting custom
NSIS commands into this variable.
Inspired-by: David Golub
As Dave Abrahams pointed out CMAKE_CURRENT_SOURCE_PATH is wrong, it's of
course CMAKE_CURRENT_SOURCE_DIR.
Also wrap the path in quotes so the example would even work if the source path
has spaces.
6190415 OS X: Mark find_program results as advanced
d9edf46 OS X: Use correct extra path when searching for applicaton bundles (#13066)
98b9a7f OS X: Use OSX_DEVELOPER_ROOT for app search path (#13066)
Since commit 44d007b6 (CheckIncludeFiles: fix status output, 2012-02-01)
check_include_files reports the list of files tested instead of the name
of the variable storing the result. Some projects incrementally test
and concatenate very long lists leading to long messages that do not
provide much information. Users report confusion especially when the
lines wrap.
For lists of more than two files produce messages of the format
Looing for N include files first.h, ..., last.h
where N is the list length and "..." is literal. Leave the log file
entries and cache entry description unchanged as they should have the
full detail of the check performed.
The parent commit added a search path relative to OSX_DEVELOPER_ROOT.
But with Xcode 4.3 the nested Applications folder is in a different
relative location compared to that root. This commit makes the intent
of the previous commit work with older and newer Xcode directory layouts.
Furthermore, it only adds paths that exist to the search path.
Starting with Python3, standard Python installs may have additional ABI
flags attached to include directories and library names. As of 3.2, the
following flags are in the configure file:
d -> --with-debug
m -> --with-pymalloc
u -> --with-wide-unicode
Python 3.3 seems to no longer have --with-wide-unicode. Hopefully Python
will ensure that the possible flags always show up in a stable order.
The 'd' flag is ignored since the debug library is considered separate.
There is still the problem where ABI flags cannot be specified in
find_package since the letters confuse the version comparator.
If PYTHON_INCLUDE_PATH is put into the cache, then it will always
override whatever might be found and PYTHON_INCLUDE_DIR is never given a
chance to find something different. It being marked as INTERNAL also
means that it cannot be changed without editing CMakeCache.txt directly.
Basically, the scenario is that if the Python version is changed, then
deleting PYTHON_INCLUDE_DIR doesn't work because any cached
PYTHON_INCLUDE_PATH variable is set before find_path is even called. Any
build tree using a previous version will still need either manual
removal of PYTHON_INCLUDE_PATH or a complete reconfigure, but in the
future changing the Python version can be accomplished by deleting
PYTHON_INCLUDE_DIR and reconfiguring with the new version.
9b32475 automoc: add define to test which caused bug #130182066511 automoc: fix#13018, proper cmake escaping to avoid false rebuilds
c652812 make cmLocalGenerator::EscapeForCMake() static
The variables stored in the AutomocInfo.cmake file were not properly
escaped, so when reading them back they could turn into lists, if they
contained double quotes initially.
This patch fixes this by using cmLocalGenerator::EscapeForCMake() to
escape the variables properly.
Alex
Since commit 4693cf84 (Xcode: Detect new default locations of Xcode 4.3
bits and pieces) Darwin.cmake detects the developer application
directory instead of hard-coding /Developer. Replace the hard-coded
path in CMAKE_SYSTEM_APPBUNDLE_PATH using the computed result.
Patch by Amine Khaldi!
Also, start using the -MT flag to set a target name for depfiles.
This works around a bug observed in distcc, as explained in the
comment. Based on a patch by Alexander Usov.
This patch uses get_filename_component(REALPATH) so symlinks in the path
to Eclipse are resolved, which makes the version detection work in such cases.
Alex
Use the CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES to look for libraries
that are in the -showme output from mpi<lang> programs. This is because
some libraries reported by -showme are found there, and FindMPI will
fail if they are not found.
0f4dfa6 CPack: Use real path to PackageMaker to find its version file (#12621)
4693cf8 Xcode: Detect new default locations of Xcode 4.3 bits and pieces (#12621)
Brad King
Stephen Kelly
Peter Kuemmel
David Cole
Rolf Eike Beer
Bill Hoffman
Alex Neundorf
Eric NOULARD
Sergei Nikulov
Patrick Gansterer
Benjamin Eikel
Clinton Stimpson
James Bigler
Philip Lowman
Marcin Wojdyr
Kitware Robot
Andy Piper
Zack Galbreath
Alexey Ozeritsky
Jonathan Klein
Mario Bensi
Charlie Sharpsteen
Kurtis Nusbaum
Tobias Bieniek
Matt McCormick
Anthony J. Bentley
Minmin Gong
David Faure
Modestas Vainius
Ben Boeckel
Tom Hughes
Kashif Rasul
Peter Collingbourne