This can be allowed in the next release, but it needs to have some
features present and tested such as
* Ensuring that relative paths do not appear in the generated property.
* Ensuring that paths to the source or build directories do not appear.
* Generating a check in the file for CMake 3.1 or later so that the
resulting property will be consumed.
* Ensuring that any referenced targets are part of an export set and
generating a check for them.
* INSTALL_INTERFACE and BUILD_INTERFACE content.
All of these checks are already done for INTERFACE_INCLUDE_DIRECTORIES,
but it is too late to add them for INTERFACE_SOURCES for CMake 3.1.
As the checks introduce some new error conditions, it is better to
disallow exporting fully for this case and introduce proper error
conditions later instead of policies.
Follow the pattern of checks that are made for INTERFACE_INCLUDE_DIRECTORIES.
Existence is already checked by cmSourceFile::GetFullPath. Add a check
to disallow relative paths in source directories. Otherwise code such as
target_sources(lib1 INTERFACE foo.cpp)
would fail if consumed by a target in a different directory.
Unlike the INTERFACE_INCLUDE_DIRECTORIES behavior, we don't care whether
the entry comes from an IMPORTED target or not. In the include directories
case, the directory for a non-imported target might not exist yet but
might be created. In the sources case, a file which does not yet
exist in the filesystem must be explicitly marked with the GENERATED
property.
Adjust existing tests and add a new test for the error.
Extend the write_compiler_detection_header interface to allow
specifying a location for supplementary files, and getting the
list of resulting files as a variable.
Re-run if the input file changes or if the output file is removed.
This only works with the Makefile generators currently. The limitation
of the Ninja generator is tracked as issue #15256. The IDE
generators will need larger refactoring as they currently rely on
being able to determine the depends and output files at the start of
generate-time, which is too early for the file(GENERATE) case.
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
The evaluation files must be known before cmTargetTraceDependencies
attempts to find them, but we must actually generate the files after
cmTargetTraceDependencies, as that can add to target SOURCES. The
limitation is that the generated output name must not depend on the
SOURCES of a target if the generated file is used by that target.
Mark the output files as GENERATED so that trace dependencies does
not expect them to already exist in the filesystem.
Move the invokation of ForceLinkerLanguage in the Generate logic
to after the generated file names are known. ForceLinkerLanguage
tries to determine the sources of a target (in order to determine
an already-known language) and otherwise fails to get information
about the generated file.
Test that the output of file(GENERATE) can be used as a target source
file and that accessing the target SOURCES in the name of the output
file is an error. Accessing the TARGET_OBJECTS would be a similar
error if it was legal to use that generator expression in this
context. That is not currently possible and is a different error
condition, so test the current error output as a reminder to change
the expected output if that becomes possible in the future. Test
that generated rule files resulting from cmTargetTraceDependencies
appear in the SOURCES generated in the output file.
1531df2b configure_file: Warn about unknown arguments
4abbb140 Qt4: Fix configure_file call to use COPYONLY, not COPY_ONLY
bd7ba8e2 KWSys: Fix configure_file call to use COPYONLY, not COPY_ONLY
e9282782 Help: Fix configure_file call to use COPYONLY, not COPY_ONLY
Extend the RunCMake.configure_file test with a case covering possible
common typos of the COPYONLY option.
Reported-by: Iosif Neitzke <iosif.neitzke@gmail.com>
609037f4 ExternalProject: Add unit tests for CMAKE_CACHE_DEFAULT_ARGS
98cdb658 ExternalProject: Add CMAKE_CACHE_DEFAULT_ARGS arguments
36cf8a1e Tests/Tutorial: Fix when USE_MYMATH is OFF
d1b62185 Merge branch 'parent-scope-tests' into variable-pull-failure
5f414cef Revert "cmDefinitions: Don't store parent lookups"
e0c0b1ac test: add a test for PARENT_SCOPE with multiple scopes
064c415d test: add test for PARENT_SCOPE behavior
* parent-scope-tests:
test: add a test for PARENT_SCOPE with multiple scopes
test: add test for PARENT_SCOPE behavior
Conflicts:
Tests/RunCMake/set/RunCMakeTest.cmake
In the case of:
-DCACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG:BOOL=TRUE
the variable is parsed out as:
CACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG
because the parser allows '=' in the variable name. Disallow such a name
on the command line.
Given that you have a foobar that identifies itself as 1.2.3 from now on a
find_package(foobar 1.2 EXACT)
will succeed, as 1.2.3 will now be considered as being 1.2. Until now this was
only the case for version 1.2.0.
Unlike with Unix Makefiles generator modifying compiler paths was not
protected with Ninja generator. It was possible to modify them in the
cache without the expected effect on the generated solution. Also
activate corresponding tests with Ninja.
be6a555d Tests: Test setting a generator platform in a toolchain file
d506fee8 Tests: Use -A option to pass generator platform selection
11c9ddd6 ExternalProject: Use -A option to pass generator platform
29bd843e CTest: Use -A option to pass generator platform selection
eb7d8156 cmake: Add -A option to specify a generator platform
858d5a0b Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin
e177e7af FPHSA: Avoid if() dereferencing of quoted variable
425acc52 cmcurl: Use if(DEFINED) to simplify conditions
cede5cbd libarchive: Avoid depending on if() to dereference a quoted variable
2d97178b FindGTK2: Avoid depending on if() to dereference a quoted variable
0b12815d Modules/Test*.cmake: Use if(DEFINED) to simplify conditions
188a1f23 If: Introduce policy CMP0054 - don't dereference quoted variables in if()
b900c1cc If: Extract cmConditionEvaluator from if() implementation
Define the 'cmake -A' option to set CMAKE_GENERATOR_PLATFORM
without having to spell out the whole variable name. We choose
the name '-A' for "platform" because '-P' is already taken, and
in the common use case the "platform" is actually an architecture
(e.g. x64).
Teach the RunCMake test infrastructure to use -A to pass the generator
platform. Extend the RunCMake.GeneratorPlatform test with a case to
verify that the -A option cannot be repeated.
For VS generator names that do not specify the platform name, read
CMAKE_GENERATOR_PLATFORM to get it.
Extend the RunCMake.GeneratorPlatform test with a case covering
use of the x64 platform when the test generator is a Visual Studio
generator whose name does not specify a platform.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
The lexer changes in commit v3.0.0-rc1~495^2 (Add Lua-style long
brackets and long comments to CMake language, 2013-08-06) accidentally
left out matching '[' as a single character in an unquoted argument.
Add a lexer rule to match it and extend the RunCMake.Syntax test to
cover this case.
After calls to ProcessSourceItemCMP0049, check for an empty return
string to detect a failure instead of trusting GetErrorOccuredFlag.
The latter could have been left from a preceding non-fatal error.
Extend the RunCMake.Configure test to cover a case that exposed this
problem.
The generator name is "Xcode", not "XCode". Fix this typo. Explicitly
exclude the SubDirSpaces test on Xcode because it does not work. Also
tell the RunCMake.File_Generate test when Xcode is not multi-config so
it can exlcude the OutputConflict case.
Inspired-by: Daniele E. Domenichelli <daniele.domenichelli@iit.it>
Fix cmTarget::GetSourceFiles to set EvaluateForBuildsystem on the
$<TARGET_PROPERTY:...,INTERFACE_SOURCES> generator expression so that
the $<TARGET_OBJECTS> generator expression is allowed within an
INTERFACE_SOURCES value.
Extend the InterfaceLibrary test to cover this case. Extend the
RunCMake.TargetObjects test to cover failure of $<TARGET_OBJECTS>
when used through $<TARGET_PROPERTY:...,INTERFACE_SOURCES> in a
non-buildsystem context.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
Use the AddInterfaceEntries helper to avoid duplication. In
TargetPropertyEntry, replace the TargetName string member with a
reference to the full cmLinkImplItem that produced the entry. This is
possible because the cmLinkImplItem is available in AddInterfaceEntries
(it was not available in GetIncludeDirectories). Having the full
cmLinkImplItem allows processIncludeDirectories to implement CMP0027 OLD
behavior without repeating the target name lookup.
Update the RunCMake.CompatibleInterface test DebugProperties case
expected output for the new order of the messages.
Commit v2.8.11~156^2~2 (Expand includes and defines transitively
in 'external' genexes., 2013-02-13) introduced a recursive loop
and a stack overflow during evaluation of a link implementation
which depends on a transitive property, such as
add_library(empty1 ...)
add_library(empty2 ...)
target_link_libraries(empty1
PRIVATE
$<$<STREQUAL:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>,/foo/bar>:empty2>
)
There is no use-case for code like that currently, but it should not
cause a stack overflow.
Avoid the recursion by reporting an error early if a case like this
is found.
9998d78d Tests: Speed up RunCMake.include_directories test
6eee5d74 Tests: Drop broken and now unused RunCMake_TEST_FILE option
f0f15b93 Tests: Refactor RunCMake.include_directories to drop RunCMake_TEST_FILE
8707814e Tests: Refactor RunCMake.File_Generate to drop RunCMake_TEST_FILE
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Remove unnecessary language initializations. Change the main
CMakeLists.txt project() call to specify NONE. Use enable_language(CXX)
instead of project() in cases that need it to avoid enabling C too.
We cannot use -DRunCMake_TEST=${RunCMake_TEST_FILE} because test cases
use project(${RunCMake_TEST}) and the project name cannot be a path to a
file. The parent and grandparent commits removed the only uses of the
option. Drop it now.
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Create options "MESSAGE_ALWAYS", "MESSAGE_LAZY", and "MESSAGE_NEVER" to
specify whether to print the "Installing" and "Up-to-date" messages.
Extend the RunCMake.file test with cases covering these options.
Teach cmFileCopier::InstallDirectory to detect whether the destination
directory exists. If so, report it as "Up-to-date" instead of
"Installing". This resolves message asymmetry with file installations.
Extend the RunCMake.file and RunCMake.install tests to check the
installation output on both the first and second run.
Suggested-by: J Decker <d3ck0r@gmail.com>
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
ddec418a Features: Add compiler version support to WriteCompilerDetectionHeader.
b7029576 Project: Add configurable name for version computation macros.
78acaafe Project: Separate simulated compiler id from version detection.
567af1a5 WCDH: Issue a better message for version compatibility.
Xcode 1.5 does not support multiple configurations. The generator also
adds some sources internally that cause extra OriginDebug output.
Update the expected output to tolerate it.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
If we fail to create the generator named by CMAKE_GENERATOR, exit
with an error message instead of crashing. While at it, fix the
wording of the error message when CMAKE_GENERATOR is not set.
Extend the RunCMake.CommandLine test with cases covering the
"cmake --build" option when the named directory does not provide
a CMakeCache.txt with a valid CMAKE_GENERATOR.
Teach set_property and get_property an "INSTALL" property type to be
associated with install-tree file paths. Make the properties available
to CPack for use during packaging. Add a "prop_inst" Sphinx domain
object type for documentation of such properties.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
Add source file properties to control Xcode file type attributes:
XCODE_EXPLICIT_FILE_TYPE => explicitFileType
XCODE_LAST_KNOWN_FILE_TYPE => lastKnownFileType
Add a RunCMake.XcodeProject test to verify generated project content.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Provide a function to write a portable header to detect compiler
features. Generate a preprocessor #error for unknown compilers
and compiler versions whose features are not yet recorded. This
error condition might be relaxed in the future, but for now it
is useful for verification of expectations.
bc9a8bba Makefile: Undef FEATURE_STRING iteration define after use.
eb638c75 Tests: Make CompileFeatures feature list lang-specific.
e2f09aff CMakeConfigurableFile: Remove excess newline.
5109b042 Features: Fix GNU 4.8.1 version test.
6a9fdbeb Test: Parameterize the language in the CompileFeature test.
f5bf9d43 Tests: Make CompileFeature tests use highest standard known.
These policies should be checked at the call site that tries to access
the LOCATION or SOURCES property, not the directory scope containing the
target. Thread the caller context through cmTarget::GetProperty to use
for checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 and RunCMake.CMP0051 tests with
cross-directory cases.
This policy should be checked at the call site that tries to access the
LOCATION property, not the directory scope containing the target.
Thread the caller context through cmTarget::GetProperty to use for
checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 test with a cross-directory case.
Include tests for:
- @ expansion during normal execution
- various characters in variable names for comparison between the new
and the old parser
- corner cases in the parsers
- correct messages when behavior is different
205215fb cmTarget: Add CXX_STANDARD_REQUIRED to control decay.
1df2116b Features: Decay language flag if requested is not available.
c4f4dac2 Project: Fix exit-on-error with compile feature tests.
5bb7ce72 Project: Use nullary form of main for compile feature tests.
64254e7a Project: Remove extern from static string in feature tests.
0d9c99bf Help: Fix order of help entries.
dc7639bd Tests: Fix name of cache variable.
Commit b8af2011 (cmTarget: Fix listing of source files at
configure-time., 2014-04-13) refactored a GetObjectLibrariesCMP0026
method out of GetLanguages. In flight, a conditional use of a target
if available was changed to an assert-available.
This code is only used to read the LOCATION property at configure
time, when the link information is incomplete, and not all targets
are defined, so the assert is inappropriate, even though it can lead
to incorrect information being generated. CMP0026 warns about the
potentially incorrect information anyway.
8d0b1cca Features: FATAL_ERROR on compilers with no recorded features.
447fbb3f Tests: Execute compile features tests unconditionally.
597bb72e Tests: Run RunCMake.target_compile_features unconditionally.
Users of the new target_compile_features command are expected to
check the existence of the CMAKE_CXX_COMPILE_FEATURES variable before
attempting to use it to require features.
When the primary source tree path named by a DATA{} reference does not
exist, produce an AUTHOR_WARNING instead of a FATAL_ERROR. This is
useful when writing a new DATA{} reference to a test reference output
that has not been created yet. This way the developer can run the test,
manually verify the output, and then copy it into place to provide the
reference and eliminate the warning.
If the named source tree path is expected to be a file but exists as a
directory, we still need to produce a FATAL_ERROR.
Since commit e5da9e51 (cmTarget: Allow any generator expression in
SOURCES property., 2014-03-18), source files are computed by
true evaluation of generator expressions, including TARGET_OBJECTS.
This evaluation requires the presence of cmGeneratorTarget objects
since commit bf98cc25 (Genex: Evaluate TARGET_OBJECTS as a normal
expression., 2014-02-26).
Ensure that we don't attempt to evaluate the TARGET_OBJECTS generator
expression at configure-time, as can happen if CMP0024 or CMP0026
are OLD. Use old-style parsing of the source item to extract
object target names in that case.
Avoid calling GetProperty("SOURCES") to bypass warnings from CMP0051.
Refactor existing logic in GetLanguages which is similar in intent to
the new GetSourceFiles code.
Allow directories in the source tree or build tree only if the
install tree is a subdirectory of the source tree or build tree,
as appropriate.
Re-use the test files in the RunCMake.include_directories test
to run in multiple scenarios. Bump the required CMake version
in the test to 3.0 to ensure that the new policy warnings are
emitted correctly.
This can be used to set the compiler features required by particular
targets. An error is issued at CMake time if the compiler does not
support the required feature. If a language dialect flag is required
by the features used, that will be added automatically.
Base the target_compile_features command on cmTargetPropCommandBase. This
gives us 'free' handling of IMPORTED, ALIAS, INTERFACE, non-compilable
and missing targets.
Extend the interface of the target_compile_features command with
PUBLIC and INTERFACE keywords. Populate the INTERFACE_COMPILER_FEATURES
target property if they are set. Consume the INTERFACE_COMPILER_FEATURES
target property from linked dependent targets to determine the final
required compiler features and the compile flag, if needed.
Use the same pattern of origin-debugging which is used for other
build properties.
Record the availability of this feature for GNU 4.8 on (UNIX AND
NOT APPLE) only. In the future, availability can be recorded for
earlier GNU, for other platforms and for other compilers. Initially
the affected configurations are as restricted as possible to allow
for easy testing while extending the features vector in only one
dimension.
The error message when using the set_property API directly is not
very good, but follow up commits will provide origin debugging of
the property and a target_compile_features command which will
provide a configure-time backtrace when possible.
This will allow decoupling the name of the test from the name and
location of the source file under test, which means one source
file can be used for multiple tests.
Rename the PARENT_SCOPE test in RunCMake.set to not use a keyword
of the if() command as a file name. As the filename is now used
with an if condition, this causes a conflict.
9407174b target_sources: New command to add sources to target.
81ad69e0 Make the SOURCES target property writable.
6e636f2e cmTarget: Make the SOURCES origin tracable.
3676fb49 cmTarget: Allow transitive evaluation of SOURCES property.
e6971df6 cmTarget: Make the source files depend on the config.
df753df9 cmGeneratorTarget: Don't add computed sources to the target.
869328aa cmComputeTargetDepends: Use valid config to compute target depends.
5de63265 Genex: Only evaluate TARGET_OBJECTS to determine target sources.
aa0a3562 cmGeneratorTarget: Compute target objects on demand
042c1c83 cmTarget: Compute languages from object libraries on demand.
fdcefe3c cmGeneratorTarget: Compute consumed object libraries on demand.
c355d108 cmComputeTargetDepends: Track object library depends.
e5da9e51 cmTarget: Allow any generator expression in SOURCES property.
5702e106 cmTarget: Include TARGET_OBJECTS genex in target SOURCES property.
857d30b5 cmGlobalGenerator: Add interface to call ForceLinkerLanguages
28e1d2f8 cmStringCommand: Add GENEX_STRIP subcommand.
bf98cc25 Genex: Evaluate TARGET_OBJECTS as a normal expression.
8cd113ad cmTarget: Store strings instead of cmSourceFile* to represent SOURCES.
4959f341 cmSourceFileLocation: Collapse full path for directory comparisons.
fcc92878 cmSourceFileLocation: Remove unused Update method.
59e8740a cmTarget: Remove AddSourceFile method
26d494ba cmTarget: Use string API to add sources to cmTarget objects.
d38423ec cmTarget: Add a method to obtain list of filenames for sources.
...
Disallow the use of config-specific source files with
the Visual Studio and Xcode generators. They don't have
any way to represent the condition currently.
Use the same common-config API in cmQtAutoGenerators. While
it accepts config-specific files, it doesn't have to support
multiple configurations yet.
Loop over the configs in cmTargetTraceDependencies
and cmGlobalGenerator::WriteSummary and consume all source
files.
Loop over the configs in cmComputeTargetDepends and compute the
object library dependencies for each config.
The output of this expression may contain macros for IDEs to replace
such as $(Configuration), $(CURRENT_ARCH) etc. To avoid generating
content which is not usable in other contexts, report an error if
there is an attempt to use it in other contexts.
This commit may be reverted in the future if a solution to the
above difference is implemented.
Remove use of UseObjectLibraries from Makefile and Ninja generators. It
is not needed now because those generators use GetExternalObjects
which already contains the objects from object libraries.
The VS10 generator calls both the UseObjectLibraries and the GetExternalObjects
methods. Ensure that duplicates are not created by skipping objects
from object libraries in handling of GetExternalObjects.
Similarly, fix VS6, VS7 and Xcode object handling by skipping
external objects from OBJECT_LIBRARY usage as appropriate.
The error message in the BadSourceExpression1 test is now reported
by the generator expression evaluator, so it has different text.
Use CMAKE_PREFIX_PATH, CMAKE_FRAMEWORK_PATH, and CMAKE_APPBUNDLE_PATH
cache and environment variables to extend PKG_CONFIG_PATH before calling
pkg-config.
In each of the path in these variables it searches for lib/pkgconfig.
Then, depending on the system, it searches for
lib/${CMAKE_LIBRARY_ARCHITECTURE}/pkgconfig (debian) or for
lib64/pkgconfig (other 64 bit unixes). If any of these path is found,
it is appended to the PKG_CONFIG_PATH enviromnent variable.
Add two new arguments to the pkg_check_module and pkg_search_module
macro, NO_CMAKE_PATH and NO_CMAKE_ENVIRONMENT_PATH. The new signature
are therefore:
pkg_check_modules(<PREFIX> [REQUIRED] [QUIET]
[NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
<MODULE> [<MODULE>]*)
pkg_search_module(<PREFIX> [REQUIRED] [QUIET]
[NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
<MODULE> [<MODULE>]*)
By default, if CMAKE_MINIMUM_REQUIRED_VERSION is 3.1 or later (in
order to keep compatibility with the previous behavior), or if
PKG_CONFIG_USE_CMAKE_PREFIX_PATH is set, the CMAKE_PREFIX_PATH,
CMAKE_FRAMEWORK_PATH, and CMAKE_APPBUNDLE_PATH cache and environment
variables will be added to pkgconfig search path.
The NO_CMAKE_PATH and NO_CMAKE_ENVIRONMENT_PATH arguments disable this
behavior for the cache variables and the environment variables,
respectively, similarly to the find_package() command.
Restore support for the undocumented <CONFIG>_LOCATION target property
removed by commit v3.0.0-rc1~175^2 (cmTarget: Remove support for
<CONFIG>_LOCATION property, 2013-12-30) as part of the CMP0026 OLD
behavior.
Stephen Kelly
Brad King
Gregor Jasny
Peter Collingbourne
Daniele E. Domenichelli
Ben Boeckel
Rolf Eike Beer
Sylvain Joubert
Nils Gladitz
Clinton Stimpson