Extend the range of valid target names with the + sign. This character
can commonly be used for target names, such as those containing 'c++'.
Add a test but skip it for Borland and Watcom tools which do not support
the character.
Suggested-By: Benjamin Kloster
12fb50d GetPrerequisites: Add documentation for objdump
8eb2fe9 GetPrerequisites: Enable test for BundleUtilities on MinGW
33c94c8 GetPrerequisites: Add support for objdump
5260a86 GetPrerequisites: Move tool search paths up
cbf0756 Revert "Add the TARGET_DEFINED generator expression"
21a342c Remove use of TARGET_DEFINED from the target_link_libraries test.
47b8d32 Remove use of TARGET_DEFINED from the ExportImport test.
2e39d21 Remove use of TARGET_DEFINED from target_include_directories test.
8dfdf1c Fix the tests for evaluating includes and defines.
98a6725 Fix constness of accessors.
7e70744 Expand includes and defines transitively in 'external' genexes.
d1a2729 Fix DAG checker finding cycling dependencies.
e72eaad Workaround broken code where a target has itself in its link iface.
ec2c67b Strip stray semicolons when evaluating generator expressions.
236133e Handle targets in the LINK_LIBRARIES of try_compile.
1c0597c Add a new Export generator for IMPORTED targets.
f2ab17d Keep track of all targets seen while evaluating a genex.
This reverts commit 2bee6f5ba5.
This expression is not used, and has a semantic which is not completely
optimal (namely considering utility targets to be targets, though
usually we are interested in linkable targets).
Remove it so that we have more freedom to define better expressions in
the future.
Conflicts:
Source/cmGeneratorExpressionEvaluator.cxx
Tests/CMakeCommands/target_compile_definitions/CMakeLists.txt
Tests/CMakeCommands/target_compile_definitions/consumer.cpp
Update the unit test introduced in commit 57175d55 (Only use early
evaluation termination for transitive properties., 2013-02-07) to
not use the expression, but still test the appropriate code.
Update the unit test introduced in commit 5daaa5c4 (Fix TARGET_PROPERTY
target extractions., 2013-01-26) to not use the expression, but still
test the appropriate code.
Change the unit test introduced in commit 24dcf0c0 (Make sure
generator expressions can be used with target_include_directories.,
2013-01-16) to not use the expression, but still test the appropriate
code.
We should also check whether the INTERFACE_ variant of a property
is being read, and in the case of the compile definitions, we should
test the _<CONFIG> suffixed variants. That is already available
through the use of the methods.
This way, we use the ALREADY_SEEN optimization when evaluating
the includes of a target in 'external' generator expressions, ie, those
used in a add_custom_command invokation, as opposed to evaluating the
INCLUDE_DIRECTORIES of a target itself via GetIncludeDirectories.
This means that we can use expressions of the form
$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>
to get a list of the interface include directories of foo, including
those coming from dependencies.
We can't have a test of a target which has a single include directory in
its INCLUDE_DIRECTORIES because the shell on the MSYS platforms transforms
a single include directory to include a prefix, which is not what the test
expects. We test a target with two directories instead as a means to
test a target with no link dependencies.
Move the Tests/FPHSA_InvalidFOUND_VAR test case over to a new
RunCMake.FPHSA test with a BadFoundVar case. The RunCMake tests are
built to cover failure cases easily and robustly.
Imported targets are re-exported so that they can be used by the
try_compile generated code with target_link_libraries.
This makes the use of the cmake_expand_imported_targets macro
obsolete. The macro is not able to expand the generator expressions
which may appear in the IMPORTED_LINK_INTERFACE_LIBRARIES content.
Instead it just sees them as 'not a target'.
In the new mode FPHSA now accepts a FOUND_VAR option, which can be set
either to ExactCase_FOUND or UPPERCASE_FOUND, no other values are
accepted. Also add tests for that, including failure.
Alex
Previously, GetIncludeDirectories was called before calling
target->AddSourceFile(mocCppSource). Since commit a1c4905f (Use the
link information as a source of compile definitions and
includes., 2013-02-12), the include directories are determined by
the link information.
Valid link information requires that the linker language can be
determined, which depends on the source files languages and the
dependent targets languages. In the case of the no_link_languages
target in the unit test, there are no dependencies and the additional
source file no_link_languages_automoc.cpp is added to the target
at generate-time. That file can be used to determine the linker
language, but it must be added to the target before calling
GetIncludeDirectories.
Extend the Module.ExternalData test to cover a DATA{} reference whose
name contains a space. Skip the case when the native build tool does
not support spaces.
Some make tools do not support spaces inside the source tree paths.
Decide early whether to add tests that depend on support for spaces so
we can use the result in a decision for any test.
e83e6a1 Test Unix Makefiles generator support for changing compilers
c307e1c Tests/RunCMake: Allow tests to control build tree behavior
2963c98 Merge branch 'empty-compiler-crash' into compiler-change-cleanup
1df09e5 Delete entire CMakeFiles directory when deleting CMakeCache.txt (#13756)
Add RunCMake.CompilerChange test to cover use of -DCMAKE_C_COMPILER=cc
to change the compiler of an existing build tree. Also test for proper
failure with -DCMAKE_C_COMPILER="" and no CC in the environment.
This reverts commit 2c3654c3de.
The removal of some tests added in commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05) are also squashed
into this commit.
This is a partial revert of commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05).
As the interface includes and defines are now determined by the link
closure, there is no need to populate the corresponding properties
explicitly.
ba48e63 Generate config-specific interface link libraries propeties.
deb51a7 Remove unused forward declarations.
9712362 Don't allow utility or global targets in the LINKED expression.
faa927e Make sure INTERFACE properties work with OBJECT libraries.
510fdcb Whitelist target types in target_{include_directories,compile_definitions}
4de7178 Ensure that the build interface includes have been added.
df74bc3 Only append build interface include dirs to particular targets.
d4e5c67 Don't keep track of content determined by target property values.
1fb545a Move a special case for PIC from the genex to the cmTarget code.
57175d5 Only use early evaluation termination for transitive properties.
4cf161a Fix determination of evaluating link libraries.
3a298c0 Fix generation of COMPILE_DEFINITIONS in DependInfo.cmake.
655e98b Ensure type specific compatible interface properties do not intersect.
46e2896 The COMPATIBLE_INTERFACE does not affect the target it is set on.
5f926a5 Test printing origin of include dirs from tll().
7c0ec75 De-duplicate validation of genex target names.
...
This is needed in the case that Automoc is used, as that calls
GetIncludeDirectories, which may cache the resulting include dirs
too early in the generate step.
Also, because the automoc step is so early, we can't cache the
include directories at that point. At that point the build interface
of all dependencies are not populated yet, so we'd be caching the
includes before appending the build interface. Only start caching
when we're definitely generating the buildsystem. At that point, the
includes should be stable.
We still need to invoke AppendBuildInterfaceIncludes
in the GlobalGenerator because the build interface includes affect
mostly the dependencies of targets (such as the automoc targets),
rather than the targets themselves, so the build interface needs
to be appended for all targets before generation is done.
All ctest --build-and-test invocations require the options
--build-generator ${CMAKE_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
to be passed and have consistent values, except for a few special cases.
Collect the generator options in a variable instead of repeating the
options everywhere explicitly.
Implement generator toolset selection (cmake -T) for VS >= 10 by setting
the PlatformToolset. Extend the RunCMake.GeneratorToolset test case to
verify CMAKE_GENERATOR_TOOLSET when the generator supports -T.
Since commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23)
all MSVC version information is detected during the compiler id step
from the actual compiler invoked by generated build systems rather than
hard-coded in VS generators. Therefore we can set the PlatformToolset
in VS >= 10 project files and support toolsets from other VS versions.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_TOOLSET and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorToolset test to cover basic "-T" option cases.
Verify that CMAKE_GENERATOR_TOOLSET is empty without -T, that -T is
rejected when the generator doesn't support it, and that two -T options
are always rejected.
We need to make sure expressions which evaluate TARGET_PROPERTY:TYPE
multiple times for example get the correct result each time, and
not an empty string instead.
Teach CMakeParseImplicitLinkInfo to convert implicit link library full
paths to a canonical form. This makes them more reproducible in case
different language compiler front-ends add the same library by different
paths e.g. ".../libA.a" and "...//libA.a".
Add a case to the CMake.ImplicitLinkInfo test to cover removal of extra
slashes from both library and directory paths.
e48d842 Cache context-independent includes on evaluation.
089fe1c Optimize genex evaluation for includes and defines.
179f495 find_package: Reword <package>_NO_INTERFACES documentation
e7b579b Test workaround of bad interface include directories from depends.
77cecb7 Add includes and compile definitions with target_link_libraries.
0b92602 Add the $<LINKED:...> generator expression.
0fa7f69 Add API to check if we're reading a includes or defines property.
2c3654c Add a way to exclude INTERFACE properties from exported targets.
d4297d5 Export targets to a targets file, not a Config file.
df4d2b2 Make it an error for INSTALL_PREFIX to be evaluated.
7ceeba9 Advance more when preprocessing exported strings.
30268b4 Handle reading empty properties defined by the link interface.
5484c60 Merge branch 'vs6-rule-files' into add-ExternalData-module
1fd8d01 ExternalData: Attach download rules to content links in IDEs
a6d3ffc Fix Module.ExternalData test on VS 6
aed590a Fix Module.ExternalData test on Cygwin
06e8ded Merge branch 'fix-atomic-rename-on-Windows' into add-ExternalData-module
e2e0d2e ExternalData: Collapse ../ components in DATA{} paths
ee2abfd ExternalData: Add support for SHA 1 and 2 hash algorithms
aa8b228 ExternalData: Generalize hash algo/ext handling
9e518a8 ExternalData: Allow DATA{} syntax to reference directories
175ed02 ExternalData: Allow ()-groups in series match regex
4befecc ExternalData: Add tests covering interfaces and errors
bcd2580 ExternalData: Improve series matching using an explicit syntax
c0cebcb ExternalData: Remove unused private interface
5275993 ExternalData: Cleanup stray TODO and typo in comments
7bb8344 ExternalData: Do not match directory names when resolving DATA{}
00d801f ExternalData: Remove compatibility with CMake < 2.8.5
...
Run the test with the ctest --build-noclean option. The test
CMakeLists.txt file already uses file(REMOVE_RECURSE) to clean out
downloaded data anyway. Some file removed by "msdev ... /clean" causes
CMake to re-run in the middle of the build step and file(REMOVE_RECURSE)
wipes out already-generated files.
This establishes that linking is used to propagate usage-requirements
between targets in CMake code. The use of the target_link_libraries
command as the API for this is chosen because introducing a new command
would introduce confusion due to multiple commands which differ only in
a subtle way.
This is both a short form of using a TARGET_DEFINED expression
together with a TARGET_PROPERTY definition, and a way to strip
non-target content from interface properties when exporting.
The test added by commit e378ba5f (Add CTestLimitDashJ test, 2012-12-26)
crashes with CTest compiled by Borland 5.8. There seems to be interaction
among the large number of internal ctest runs. It is probably related to
the undiscovered underlying issue mentioned in commit 32478069 (CTest:
Prevent creation of unbounded number of tests in ctest, 2012-12-18) when
fixing the symptom covered by the CTestLimitDashJ test.
Add --force-new-ctest-process to avoid the crash. Further investigation
will still be needed to identify the true problem.
Use a trailing slash to reference a directory. Require that a list
of associated files be specified to select from within the directory.
One may simply use DATA{Dir/,REGEX:.*} to reference all files but
get a directory passed on the command line.
Refactor use of the ExternalData_SERIES_MATCH value to avoid assuming
that it has no ()-groups that interfere with group indexing.
Extend the Module.ExternalData test to cover this case.
Add a Module.ExternalData test to verify data retrieval and test
argument DATA{} references.
Add a RunCMake.ExternalData test to verify error handling and automatic
transformation of a raw data to a content link and staged object.
7bf490e Make subclasses responsible for joining content.
f6b16d4 Don't allow targets args in the new target commands.
b3a7e19 Make the Property name protected so that subclasses can use it.
We need to make sure we can export targets which have content such
as $<0:$<TARGET_PROPERTY:not_a_target,INTERFACE_INCLUDE_DIRECTORIES>
That means making not finding a target non-fatal here.
These interface-related link-libraries properties are used to determine
the value of the other INTERFACE properties, so we were getting infinite
recursion and segfaults otherwise.
6063fef Output include directories as LOG messages, not warnings.
aa66748 Specify the target whose includes are being listed.
d70204a Only output includes once after the start of 'generate-time' when debugging.
0d46e9a Store includes from the same include_directories call together.
830246e Export the COMPATIBLE_INTERFACE_BOOL content properties
bd82bb4 Clear the link information in ClearLinkMaps.
e987991 Make INTERFACE determined properties readable in generator expressions.
d9afacc Exit early if we find an inconsistent property.
1800f70 Populate the link information cache before checking dependent properties.
With similar reasoning to the parent commit, as downstreams, we can't
determine what $<CONFIG> generator expressions would be appropriate.
Upstream would have populated the INTERFACE_INCLUDE_DIRECTORIES with
config-specific generator expressions, possibly appropriate for
their DEBUG_CONFIGURATIONS. In theory, if we would add include
directories for a DEBUG intent, we would have to match the upstream
configurations for that.
Rather than attempting to discover the appropriate configurations
at this time, simplify the feature instead. The use of IMPORTED targets
with these commands could still be added in the future if targets
would export their DEBUG_CONFIGURATIONS somehow.
This reverts commit 9cfe4f1b76.
It turns out that correctly adding the content to
the IMPORTED_LINK_INTERFACE_LIBARIES_<CONFIG> of an upstream target
from the buildsystem of a downstream project is not simple.
If upstream had added the INTERFACE content, the config-specific
properties would be determined by the DEBUG_CONFIGURATIONS of
upstream.
As downstream, we don't have any information about what
the DEBUG_CONFIGURATIONS of upstream were, so we can't determine
which configuration-specific properties to populate. The best we can do
is add it to all of them or add it to the ones downstream considers to
be DEBUG_CONFIGURATIONS, neither of which is a good solution.
So, removing the porcelain API for that is the best approach. A human
can still determine which properties to populate and use
the set_property API to populate the desired properies.
Another solution to this would be for upstream targets to publish
what they consider DEBUG_CONFIGURATIONS, but that can be added in
a future release.
Otherwise, we get a separate IncludeDirectoriesEntry for each include,
and that causes unnecessary and confusing splitting in the output when
debugging the INCLUDE_DIRECTORIES property.
This new expression allows checking how a policy was set when a target
was created. That information is only recorded for a subset of policies,
so a whitelist is used.
Set CMAKE_SUPPRESS_REGENERATION in the Lib1 and Lib2 projects so that
their .vcxproj files do not contain references to ZERO_CHECK. Such
references do not make sense when using the files in another .sln file.
This does not reduce the effectiveness of the test because real projects
that use include_external_msproject will have their own .vcxproj files not
generated by CMake anyway.
The ExternalProject_Add DEPENDS option adds two types of dependencies.
It adds a target-level build order dependency between the external
project target and the named targets. It also adds a file-level
dependency on the "done" stamp file of the named external project
targets. Targets not created by ExternalProject_Add have no such stamp
file and no _EP_STAMP_DIR property. Prior to commit d14c0243 (Refactor
repeated code into function, 2012-04-26) we unconditionally accepted an
empty stamp dir and generated a dependency on a non-existent file.
After that commit we generate an error that no stamp dir is set.
Skip the file-level dependency when the named dependency is not an
external project target in order to allow this use case. Teach the
ExternalProject test to cover the case.
1d74ba2 Test evaluation target via export for generator expressions
522bdac Export the INTERFACE_PIC property.
4ee872c Make the BUILD_INTERFACE of export()ed targets work.
1d47cd9 Add a test for the interfaces in targets exported from the build tree.
6c828f9 Move the exported check for file existence.
cfd4f0a Move the exported check for dependencies of targets
d8fe1fc Only generate one check per missing target.
f623d37 Don't write a comment in the export file without the code.
b279f2b Strip consecutive semicolons when preprocessing genex strings.
The Config and IMPORTED_ variants may also contain generator
expressions.
If 'the implementation is the interface', then the result of
evaluating the expressions at generate time is used to populate
the IMPORTED_LINK_INTERFACE_LIBRARIES property.
1) In the case of non-static libraries, this is fine because the
user still has the option to populate the LINK_INTERFACE_LIBRARIES
with generator expressions if that is what is wanted.
2) In the case of static libraries, this prevents a footgun,
enforcing that the interface and the implementation are really
the same.
Otherwise, the LINK_LIBRARIES could contain a generator
expression which is evaluated with a different context at build
time, and when used as an imported target. That would mean that the
result of evaluating the INTERFACE_LINK_LIBRARIES property for
a static library would not necessarily be the 'link implementation'.
For example:
add_library(libone STATIC libone.cpp)
add_library(libtwo STATIC libtwo.cpp)
add_library(libthree STATIC libthree.cpp)
target_link_libraries(libtwo
$<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,STATIC_LIBRARY>:libone>)
target_link_libraries(libthree libtwo)
If the LINK_LIBRARIES content was simply copied to the
IMPORTED_LINK_INTERFACE_LIBRARIES, then libthree links to libone, but
executables linking to libthree will not link to libone.
3) As the 'implementation is the interface' concept is to be
deprecated in the future anyway, this should be fine.
Make a C executable instead of attempting to make a C++ static
library (and not really succeeding). This was introduced in
commit 894f52f3 (Handle INTERFACE properties transitively for
includes and defines., 2012-09-23).
3581b96 Process the INTERFACE_PIC property from linked dependencies
042ecf0 Add API to calculate link-interface-dependent bool properties or error.
bf5ece5 Keep track of properties used to determine linker libraries.
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
This makes
set(CMAKE_BUILD_INTERFACE_INCLUDES ON)
add the equivalent of
set_property(TARGET tgt APPEND PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR};${CMAKE_CURRENT_BINARY_DIR}>
)
to every target.
If the headers are in CMAKE_CURRENT_SOURCE_DIR, and the generated headers
are in CMAKE_CURRENT_BINARY_DIR, this is a convenient way to build a target
bar, which depends on foo, just by using target_link_libraries() and adding
the INTERFACE_INCLUDE_DIRECTORIES to the INCLUDE_DIRECTORIES of the target
being linked. There will be more-convenient porcelain API to consume the
property in the future.
This makes it possible to use:
target_link_libraries(foo LINK_INTERFACE_LIBRARIES bar)
where foo is an IMPORTED target. Other tll() signatures are not
allowed.
Previously we kept direct link dependencies in OriginalLinkLibraries.
The property exposes the information in the CMake language through the
get/set_property commands. We preserve the OriginalLinkLibraries value
internally to support old APIs like that for CMP0003's OLD behavior, but
the property is now authoritative. This follows up from commit d5cf644a
(Split link information processing into two steps, 2012-11-01).
This will be used later to populate the link interface properties when
exporting targets, and will later allow use of generator expressions
when linking to libraries with target_link_libraries.
Also make targets depend on the (config-specific) union of dependencies.
CMake now allows linking to dependencies or not depending on the config.
However, generated build systems are not all capable of processing
config-specific dependencies, so the targets depend on the union of
dependencies for all configs.
cc676c3 OS X: Detect implicit linker framework search paths
2dd67c7 OS X: Detect implicit link directories on modern toolchains
ba58d0c OS X: Link with all framework search paths, not just the last
894f52f Handle INTERFACE properties transitively for includes and defines.
f5b1980 Populate the ExportedTargets member early in GenerateMainFile
c67b812 Make cycles in target properties ignored, not an error.
d0f950f Use mapped config properties to evaluate $<CONFIG>
26def17 Make all relevant targets available in the genex context.
0c657dc Add API to populate INTERFACE properties in exported targets.
e04f737 Add API to extract target names from a genex string.
b0c8f73 Add the TARGET_NAME generator expression.
77475fe Allow generator expressions to require literals.
b2f1700 GenEx: Add expressions to specify build- or install-only values
This means for example, that consumers can use:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES})
instead of also needing to specify all 'public' dependencies:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES} ${QT_QTCORE_LIBRARIES} )
when using the IMPORTED targets. Also populate the
IMPORTED_LINK_DEPENDENT_LIBRARIES property so CMake can help the linker
find shared library dependencies.
This is for specifying INCLUDE_DIRECTORIES relevant to the build-location
or the install location for example:
set_property(TARGET foo PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
"$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR};${CMAKE_CURRENT_SOURCE_DIR}>"
"$<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include>"
)
A 'bar' target can then use:
set_property(TARGET bar PROPERTY
INCLUDE_DIRECTORIES
"$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>"
)
and it will work whether foo is in the same project, or an imported target
from an installation location, or an imported target from a build location
generated by the export() command.
Because the generator expressions are only evaluated at build-time, these
new expressions are equivalent to the ZeroNode and OneNode.
The GeneratorExpression test is split into parts. Some shells can't run
the custom command as it is getting too long.
0941d62 Add a way to print the origins of used include directories.
18a3195 Keep track of INCLUDE_DIRECTORIES as a vector of structs.
76ea420 Use cmsys::auto_ptr to manage cmCompiledGeneratorExpressions
Resolve this warning:
".../Tests/CMakeCommands/target_link_libraries/depB.cpp", line 8: warning:
variable "a" was declared but never referenced
DepA a;
^
Add a test that verifies that when ctest -j 4 is called, at most, 4 tests
are executed at any one time.
The test works by running the same script as each of 100 tests. And then setting
up test properties for DEPENDS, RUN_SERIAL, PROCESSORS and COST in order to get
the tests to run in a semi-deterministic ordering, even in parallel. The script
writes a file, sleeps for a bit, and then deletes the file. In the meantime, it
counts files that currently exist, and emits output that triggers a test failure
if the count of files is ever greater than 4.
Prior to the commit that fixed bug #12904, this would result in a failed test
because the output of some of the tests would indicate that more than 4 tests
were running simultaneously.
Now that this issue is resolved, this test will help guarantee that it stays
resolved moving forward.
Previously we hard-coded a list of implicit framework directories but
did not account for CMAKE_OSX_SYSROOT or for changes to the list across
OS X versions. Instead we should automatically detect the framework
directories for the active toolchain.
The parent commit added the "-Wl,-v" option to ask "ld" to print its
implicit directories. It displays a block such as:
Framework search paths:
/...
Parse this block to extract the list of framework directories.
Detection may fail on toolchains that do not list their framework
directories, such as older OS X linkers. Always treat the paths
<sdk>/Library/Frameworks
<sdk>/System/Library/Frameworks
<sdk>/Network/Library/Frameworks # Older OS X only
/System/Library/Frameworks
as implicit. Note that /System/Library/Frameworks should always be
considered implicit so that frameworks CMake finds there will not
override the SDK copies.
We detect the implicit link directories for the toolchain by adding a
flag to get verbose output from the compiler front-end while linking the
ABI detection binary. Newer OS X toolchains based on Clang do not add
the implicit link directories with -L options to their internal
invocation of "ld". Instead they use a linker that comes with the
toolchain and is already configured with the proper directories.
Add the "-Wl,-v" option to ask "ld" to print its implicit directories.
It displays them in a block such as:
Library search paths:
/...
Parse this block to extract the implicit link directories.
While at it, remove the checks introduced by commit efaf335b (Skip
implicit link information on Xcode, 2009-07-23) and commit 5195a664
(Skip implicit link info for multiple OS X archs, 2009-09-22). Discard
the non-system link directories added by Xcode. Discard all detected
implicit libraries in the multi-architecture case but keep the
directories. The directories are still useful without the libraries
just to suppress addition of explicit -L options for them.
Historically CMake has always expanded ${} variable references in the
values given to include_directories(), link_directories(), and
link_libraries(). This has been unnecessary since general ${}
evaluation syntax was added to the language a LONG time ago, but has
remained for compatibility with VERY early CMake versions.
For a long time the re-expansion was a lightweight operation because it
was only processed once at the directory level and the fast-path of
cmMakefile::ExpandVariablesInString was usually taken because values did
not have any '$' in them. Then commit d899eb71 (Call
ExpandVariablesInString for each target's INCLUDE_DIRECTORIES,
2012-02-22) made the operation a bit heavier because the expansion is
now needed on a per-target basis. In the future we will support
generator expressions in INCLUDE_DIRECTORIES with $<> syntax, so the
fast-path in cmMakefile::ExpandVariablesInString will no longer be taken
and re-expansion will be very expensive.
Add policy CMP0019 to skip the re-expansion altogether in NEW behavior.
In OLD behavior perform the expansion but improve the fast-path
heuristic to match ${} but not $<>. If the policy is not set then warn
if expansion actually does anything. We expect this to be encountered
very rarely in practice.
Brad King
Stephen Kelly
James Bigler
Michael Tänzer
Alex Neundorf
Rolf Eike Beer
Yury G. Kudryashov
David Cole
Nils Gladitz