PASS_REGULAR_EXPRESSION and FAIL_REGULAR_EXPRESSION both take a list of expressions.
Stop searching if the first of those has matched the output as the result will not
change anymore.
Because of clock scew between processors or just because of someone changing
the system time the end timestamp may be before the start time. Reporting a
negative time doesn't any sense, just report zero there as it already happens
for really fast tests.
The --workaround-gcc296-bugs has been part of the default Valgrind flags since
Valgrind support was added in commit 5b232ded15
(ENH: Add initial memory check support which works for Valgrind, 2003-12-15).
The Valgrind manpage says that this option should be avoided if not really
needed as it may cause real errors to get ignored. If someone uses a compiler
that really needs the flag this flag should be set by the user explicitely.
Most users will never set any flags and probably never notice that they use a
flag they shouldn't.
The memory checker command can't be quoted at this point, because previously it
has been tested that the given file exists, which will fail if the name is
quoted. The CTestTestMemcheckUnknown test aimed to test this case, has always
failed to do so and serves no useful purpose therefore.
The phrase "flag used" is somewhat imprecise, so extend it to stress
intentions.
Also correct:
- "Flag" => "Flags"
- "[CMAKE_BUILD_TYPE]" => "<CONFIG>"
dea1df4 Memoize usage requirement include directories in a config-specific map
26dba6a Fix include dir propagation from conditionally linked targets
b8259c3 Centralize maintenance of usage requirement include directories
Commit 42ebb188 (Memoize includes and defines from interface libraries.,
2013-02-22) introduced caching of the includes. Fix the memoization to
be configuration-specific so that we do not accumulate entries across
multiple evaluations in a multi-config generator.
Generator expressions, including configuration-specific expressions may
be used as link libraries of targets. The old-style keywords of
target_link_libraries are handled in terms of new generator expressions.
However, the generator expressions expect target names to be valid
against a regular expression, whereas target_link_libraries does not
require validation. In generator expression constructed without any
action from the user we need to ensure that only valid expressions are
generated. Ensure that strings which are not valid target names are not
used in generator expressions which validate the argument.
Code like
target_link_libraries(B debug A)
generates usage requirement references such as "$<$<CONFIG:DEBUG>:A>".
When cmTarget::GetIncludeDirectories uses such references it generates
expressions like:
$<TARGET_PROPERTY:$<$<CONFIG:DEBUG>:A>,INTERFACE_INCLUDE_DIRECTORIES>
When the conditions are false such references evaluate as an empty
string and the expression fails with an error such as:
$<TARGET_PROPERTY:tgt,prop> expression requires a non-empty target name.
Fix this by teaching cmTarget::GetIncludeDirectories to wrap the above
expression inside a conditional:
$<$<BOOL:$<$<CONFIG:DEBUG>:A>>:...>
so that $<TARGET_PROPERTY:...> will not be evaluated with an empty
target.
Maintain a target's internal list of usage requirement include
directories whenever the LINK_LIBRARIES property is set by either
target_link_libraries or set_property.
Re-word the documentation to make clear that CMake integrates usage
requirements during generation and not synchronously during
configuration or execution of target_link_libraries.
In commit 236133e7 (Handle targets in the LINK_LIBRARIES of try_compile,
2013-02-09) an error return case was added without closing the file in
progress. Add the missing fclose() call.
Spotted by sevenhill.
This allows the ctest_build command's TARGET option to name a target
in a subdirectory and still build properly with msbuild.
Add test case covering use of ctest_build() with such a TARGET.
In cmCTestHandlerCommand::InitialPass call InitializeHandler after setting
the CTest "SourceDirectory" and "BuildDirectory" configuration values
instead of before. This makes the values available to InitializeHandler
methods in subclasses, so also drop the duplicate configuration of those
values from cmCTestConfigureCommand::InitializeHandler.
Use cmVisualStudioSlnParser in GenerateBuildCommand() to provide correct
command line for MSBuild even when target project is stored in a
subdirectory.
Create class cmVisualStudioSlnParser as a generic parser for Visual
Studio .sln files. Implement minimum functionality but keep class
extensible. Add tests for the class.
Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
Use the suggestion from http://support.microsoft.com/kb/2262855 to escape
semicolons in preprocessor definitions for VS >= 10. Update the
COMPILE_DEFINITIONS documentation disclaimer list of known limitations
accordingly. Update our "Preprocess" test to cover the case.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
Transform the path using ConvertToNinjaPath just as we do for all other
paths. This fixes the OutOfSource test for objects in the ../OutOfBinary
directory by computing the proper full path for the /Fd option.
The MS tools create two types of PDB files as explained here:
http://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.71%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.80%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.90%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.100%29.aspx
One is created by the compiler (/Fd) and the other by the linker (/pdb).
The two options should not specify the same file. Split them up.
In the VS IDE generators, simply drop ProgramDataBaseFileName to
take the VS default "/Fd$(IntDir)vc$(PlatformToolsetVersion).pdb".
In the Makefile generators, set "/Fd" on the compile line to be
the directory containing object files (with a trailing slash the
compiler will add the "vc$(PlatformToolsetVersion).pdb" filename
automatically). Drop the /Fd option from the exe link command
line and add "/pdb" instead (already done for dll linking).
Update these rules for both MSVC and Intel tools.
Drop support for PDB_OUTPUT_DIRECTORY and PDB_NAME in STATIC
libraries because the generated .pdb files are only from /Fd
and not real linker-generated .pdb files. Update documentation to
clarify that the PDB_* properties are only for linker .pdb files.
This regresses the PDBDirectoryAndName test for STATIC libraries.
Since it is not clear at this time what should be done for STATIC
library .pdb files, comment out the relevant portion of the test
and leave a TODO comment.
In commit 0c727b90 (install(EXPORT): Force absolute paths for usr-move,
2013-03-08) and commit d4774140 (configure_package_config_file: force
absolute paths for usr-move, 2013-01-24) we supported Linux
distributions implementing the "/usr move" by assuming that installation
to (/usr)?/lib(64)? represents a non-relocatable system package.
When cross-compiling one may prepare a package for installation into a
system location on a target machine but install the package files on the
*host* machine inside another path for use with CMAKE_FIND_ROOT_PATH.
In this case the package development files must still be relocatable.
Handle "/usr move" with a new approach that works with relocatable
files. Teach configure_package_config_file and install(EXPORT) to
generate special logic in a package configuration file or targets file
for installation under (/usr)?/lib(64)?. Teach the file to recognize
when it is loaded through a symlink that refers to the same realpath as
its original install destination. In such a case, use the original
install prefix. Otherwise, compute the prefix relative to the current
file location to make it relocatable.
In VS IDE generators add a pre-build event to perform automoc instead of
using a separate custom target. This reduces the number of targets in the
.sln that need to be loaded by the IDE.
This also works around a VS 11 bug as discussed in issue 13900.
Suggested-by: Hauke Heibel <hauke.heibel@gmail.com>
When called with a non-existent LHS target name the user may be trying
to add file-level dependencies. Clarify the error message to explain
the difference between target-level and file-level dependencies. Point
the reader at the commands and options needed for the latter.
We can do this check only if the TargetName is non-empty, which means
that we're evaluating INTERFACE_INCLUDE_DIRECTORIES from a linked
dependency which was set using target_link_libraries.
It is possible to have relative paths in INCLUDE_DIRECTORIES already
in CMake 2.8.10.2, so that part will require a policy to fix.
It is considered an error if the INTERFACE_INCLUDE_DIRECTORIES contains
a directory which does not exist, which indicates a programmer error
by the upstream, or a packaging error.
One of the RunCMake.CompatibleInterface tests also needs to be updated
due to this change. Non-existant includes were used in the test, but
are not needed.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
The VS version we generate in the .sln header is used by VS when opening
the file through Windows Explorer and possibly elsewhere. Fix our
generators to use version strings known to VS to avoid a drop-down box.
For VS 10, since commit 4f96af44 (Fix VS 10 .sln files for Windows
Explorer, 2009-10-22) we use "Visual Studio 2010" instead of just
"Visual Studio 10". This is correct except that for the Express edition
we need "Visual C++ Express 2010".
For VS 11, since commit f0d66ab4 (VS11: Fix comment generated at the top
of *.sln files, 2011-10-20) we use "Visual Studio 11" in the .sln header
but the preferred value is "Visual Studio 2012" (just as the first
commit mentioned above fixed for VS 10). Also for the Express edition
we need "Visual Studio Express 2012 for Windows Desktop".
The API for retrieving per-config COMPILE_DEFINITIONS has long
existed because of the COMPILE_DEFINITIONS_<CONFIG> style
properties. Ensure that the provided configuration being generated
is also used to evaluate the generator expressions
in cmTarget::GetCompileDefinitions.
Both the generic COMPILE_DEFINITIONS and the config-specific
variant need to be evaluated with the requested configuration. This
has the side-effect that the COMPILE_DEFINITIONS does not need to
be additionally evaluated with no configuration, so the callers can
be cleaned up a bit too.
In some languages the compiler may need to know the path of the final
target file for which an object is being compiled. Honor the <TARGET>
placeholder for compilation rules to support such cases.
Note that this cannot work with OBJECT library targets because the final
target path is not known during compilation (there can even be more than
one final target).
Suggested-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The commit d2536579 (Automoc: fix regression #13667, broken build in
phonon, 2012-11-19) changed Automoc to try to re-add the Qt header dir
if it was stripped out as an implicit include from the moc command
line. When invoking a compiler, those directories are stripped out
because they are built-in, but for moc, there are no built-in directories.
The follow-up commit acc22400 (Automoc: get include dirs without
stripping implicit include dirs off, 2012-12-07) went further by not
removing the implicit include dirs, if they were specified specifically
by the user.
This had the remaining problem that the implicit include dirs appeared
in a different order of precedence for moc compared to the compiler.
Resolve that by stripping out the include dirs, where specified for
the moc command line to, and then appending them at the end. Note that
the order of the appended implicit include directories is the order
they are specified in the CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES, not
the order specified by the user.
Rename the variable added by commit 9ce1b9ef (Add
CMAKE_BUILD_INTERFACE_INCLUDES build-variable, 2012-11-25) to
CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE to be more consistent with the
existing CMAKE_INCLUDE_CURRENT_DIR variable.
Suggested-by: Alex Neundorf <neundorf@kde.org>
If there is a Qt 5.0.3 release, it may or may not contain the patch
that fixes this issue.
http://thread.gmane.org/gmane.comp.lib.qt.releasing/882
Just use the workaround until 5.1.0 which certainly will contain the
fix. Don't use the workaround before Qt 5.0.0.
We can't find both preprocessing expressions at once, because then
the BUILD_INTERFACE will always be favored if both are present, even
if INSTALL_INTERFACE appears first.
This was affecting the behavior of install(EXPORT) because the
INTERFACE_INCLUDE_DIRECTORIES contained entries like
/foo/include;$<INSTALL_INTERFACE:/bar/include>
As the INSTALL_INTERFACE always evaluates to '0', it always needs
to be preprocessed properly.
27e6f6e TI compiler: add automatic detection of prefix and suffixes
b301586 rename TI_DSP toolchain to TI, since it works also for the ARM compiler
12b25df Determine C/CXX/Fortran compiler: fix indentation
7baa55a Determine C/CXX/Fortran compiler: minor restructuring
Kitware Robot
Rolf Eike Beer
Robert Maynard
Andreas Mohr
Brad King
Stephen Kelly
Jack O'Connor
Victor Zverovich
Alex Neundorf
Marc Bartholomaeus
Ian Monroe
Petr Kmoch
Paul Kunysch