The hash_fun.hxx header is configured whether FundamentalType is enabled
or not and so cannot depend on it. Run the relevant platform tests
whether or not FundamentalType is on and configure the result directly
into hash_fun. While at it, remove the dependence of SystemInformation
on FundamentalType too since it needs only information that we now
always compute.
d931ce9 VS10: Generate relative source paths when possible (#12570)
b2e7c7a VS11: Do not use source path conversion workaround specific to VS 10
4248132 VS10: Convert paths normally unless forced to relative
c2ba6ba VS10: Simplify vcxproj.filter file generation
4f2d9d2 VS10: Refactor custom commands to use WriteSource
Add a boolean target property NO_SONAME which may be used to disable
soname for the specified shared library or module even if the platform
supports it. This property should be useful for private shared
libraries or various plugins which live in private directories and have
not been designed to be found or loaded globally.
Replace references to <CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG> and
hard-coded -install_name flags with a conditional <SONAME_FLAG> which is
expanded to the value of the CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG
definition as long as soname supports is enabled for the target in
question. Keep expanding CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG in
rules in case third party projects still use it. Such projects would
not yet use NO_SONAME so the adjacent <TARGET_SONAME> will always be
expanded. Make <TARGET_INSTALLNAME_DIR> NO_SONAME aware as well. Since
-install_name is soname on OS X, this should not be a problem if this
variable is expanded only if soname is enabled.
The Ninja generator performs rule variable substitution only once
globally per rule to put its own placeholders. Final substitution is
performed by ninja at build time. Therefore we cannot conditionally
replace the soname placeholders on a per-target basis. Rather than
omitting $SONAME from rules.ninja, simply do not write its contents for
targets which have NO_SONAME. Since 3 variables are affected by
NO_SONAME ($SONAME, $SONAME_FLAG, $INSTALLNAME_DIR), set them only if
soname is enabled.
Since commit ed0075bd (Use relative paths for custom command inputs,
2011-06-22) CMake generates full paths to source files in VS 10 project
files to avoid trouble with deep source/build tree paths. However, the VS
10 IDE will not populate the source file property dialog for a file
referenced by full path. Instead use a relative path when possible. When
not possible produce a detailed warning explaining the problem and
suggesting use of shorter directory paths.
CMake <= 2.8.4 generated VS 10 project files with a relative path to
source files. Then commit ed0075bd (Use relative paths for custom command
inputs, 2011-06-22) switched to using relative paths only for source files
holding custom commands and full paths for other sources. This behavior
was inhereted by the VS 11 generator but is not needed so use the
workaround only for exactly VS 10. Explain the behavior in comments.
Most CMake generators produce relative paths within the build tree and
full paths to files outside the build tree. Make VS 10 and VS 11
project files consistent with this approach except for paths forced to
be relative to work around a VS 10 bug.
Remove the duplicate source file classification logic used to generate
the filter files. Instead record during the main vcxproj file
generation the source files generated for each tool. Also record
whether or not each source file is converted to a relative path. Use
the recorded result during filter generation to ensure consistency
between the project file and filter file.
The SystemTools::PutEnv function tries to provide the "putenv" API
without leaking memory. However, the kwsysDeletingCharVector singleton
frees memory that may still be referenced by the environment table,
having been placed there by putenv. If any static destruction or
processing by an external tool happens after the singleton is destroyed
and accesses the environment it will read invalid memory.
Replace use of putenv with setenv/unsetenv when available. The latter
manage internal copies of the values passed instead of referencing the
original memory. When setenv/unsetenv are not available use putenv with
a singleton that removes its values from the environment before freeing
their memory. This requires an "unputenv" implementation. On at least
some platforms it must be written in terms of "putenv" because other
APIs are not available and direct modification of the "environ" global
is not safe (e.g. on Windows there is interaction with "wenviron").
Fortunately either putenv("A=") or putenv("A") will remove "A" from the
environment on these platforms. On other platforms fall back to direct
manipulation of "environ".
Also add UnPutEnv to the API and add a test for the behavior of both.
Generate anchors of the form
<a name="..."></a>
instead of
<a name="..."/>
to ensure browsers know that the anchor contains no text and do not try
to guess an end of the range. Also make the "section_Index" and item
label anchors empty instead of containing the section header or label
text. This ensures that the text associated with target anchors is not
rendered as if it were a hyperlink.
Since commit 4fbdce2b (try_compile: Use random executable file name,
2012-02-13) a different <target>.dir is used for each try-compile.
Cleanup the directories as well as their content to avoid accumulating
leftover temporary directories.
c9747f3 Ninja: CMAKE_USE_NINJA is the name of the macro
2a081a2 Ninja: no additional variable needed to enable ninja
b8c3e8c Ninja: enable Ninja for CodeBlocks
11bd9b5 Ninja: remove GCC -Wshadow warning
f93e818 Ninja: add option to enable ninja where it is not enabled by default
73426ac Ninja: no 16:9 screens for the cmake team ;)
8217c26 Ninja: ensure output directories exist
KWSys is no longer shared in projects via a server-side directory
symlink in CVS. An automated nightly date stamp commit can no longer be
shared by multiple projects directly. It needs a per-project replay
robot so the nightly commits end up needing N+1 robots instead of N.
Remove the DateStamp feature because it is no longer useful or
maintained by nightly commits.
Replace use of AppendEnv/RestoreEnv pairs with instances of
SaveRestoreEnvironment. Simplify the signature of AppendEnv and use it
in place of similar loops elsewhere. Move the RestoreEnv implementation
inside the SaveRestoreEnvironment destructor which is the only place
left that calls it.
Move the CMake version number components out of "CMakeLists.txt" into
dedicated file "Source/CMakeVersion.cmake". Set the TWEAK level to the
date explicitly. Add a "Source/CMakeVersion.bash" script to update the
date, thus replacing KWSys DateStamp for CMake. Teach the bootstrap
script to extract the version components from their new location.
It seems that file.seekg(0) will, in some circumstances, cause the next
file.getline() to omit the first character it reads. Workaround the
bug by seeking from ios::beg explicitly.
Hide custom command .rule files inside the CMakeFiles directory. Ensure
a short, deterministic, and unique name by using a hash of the directory
path containing the output file. Preserve the file name so the entry in
the IDE is human-readable. Clarify the comment that explains why the
rule file must be created on disk.
Add cmGlobalGenerator::GenerateRuleFile to compute a generator-specific
rule file location. This will allow specific generators to override the
location of .rule files without changing the behavior of other
generators.
Teach cmMakefile::AddCustomCommandToOutput to return the cmSourceFile
instance to which the custom command is attached. Use the return value
instead of separately adding a .rule extension and searching for the
source. Mark CMake-generated .rule files explicitly with a property
instead of trusting the file extension.
When loading a find module or package config file the find_package
command defines several variables to provide information about the
caller's request. Previously this was documented only in the
Modules/readme.txt file which is not distributed. Document the
behavior explicitly in the main find_package documentation.
Since commit ed1ea24c (Fix INSERT to allow inserting to empty list,
2006-05-15) the list command allows insertion into an empty list at
index 0. Fix rejection of insertion at non-zero (negative) indices to
present an error message instead of crashing.
While at it, fix the error message of the GET and REMOVE_AT operations
when the list is empty to not present a bogus allowed range.
Add a "RunCMake.list" test to cover failure cases on empty lists.
Commit ffbe61bb (make sure english is used for output of gcov, 2008-05-10)
taught ctest_coverage to set LC_ALL=POSIX to get English output from gcov.
Use the more portable value LC_ALL=C and restore the original value when
finished.
This commit creates a dummy text file for each OBJECT library for
the CodeBlocks generator, so the generated project file can reference
a unique file for each target. Most probably these files are unused.
Alex
01e979a VS: Add CMakeLists.txt re-run rules at start of generation
9a2c60e Classify known header file extensions as headers
1c48992 Always compile sources with known language
Previously, we were setting the default configuration for a generated
Xcode project to the hard-coded string "Debug" even in cases where users
customized their configuration types such that the list did not contain
"Debug". Now, we use the first string listed in CMAKE_CONFIGURATION_TYPES
as the default config for generated Xcode projects.
Refactoring in commit a2514f15 (Simplify cmNinjaTargetGenerator using
cmGeneratorTarget, 2012-03-13) accidentally removed mapping of .def file
paths through ConvertToNinjaPath (via GetSourceFilePath). Take the
ModuleDefinitionFile value from cmGeneratorTarget and map it correctly
through ConvertToNinjaPath.
In addition to generating cleaner paths in the ninja build files this
correctly links up references to a generated .def file with the custom
command output that produces it.
Since commit 328c0f65 (Simplify cmVisualStudio10TargetGenerator source
classification, 2012-03-19) the VS 10 generator uses the
cmGeneratorTarget source classification instead of directly getting the
list of source files from the target. This accidentally dropped the
CMakeLists.txt files from generated projects because they are added too
late for cmGeneratorTarget.
All generator-specific source files must be added to targets prior to
cmGeneratorTarget construction. Refactor addition of the CMakeLists.txt
files with CMake re-run custom commands to take place before normal
generation begins, and therefore early enough to be included in the
cmGeneratorTarget classification.
Commit 328c0f65 (Simplify cmVisualStudio10TargetGenerator source
classification, 2012-03-19) introduced the first use of source
classification from cmGeneratorTarget (which originated as Makefile
generator logic) in a Visual Studio generator for handling of header
files. Fix classification of header files to match known header
extensions instead of only the HEADER_FILE_ONLY property. Make it
consistent with the "Header Files" source group.
Refactoring by commit 11d9b211 (Add cmGeneratorTarget to represent a
target during generation, 2012-03-07) and commit 45c2f932 (Simplify
cmMakefileTargetGenerator using cmGeneratorTarget, 2012-03-07) preserved
behavior introduced by commit 7740ccd1 (some cleanup of the makefile
generator, 2006-02-14) that favored the IgnoreFile extension test over
the availability of a known compilation language associated with a
source file. If a source is not marked as HEADER_FILE_ONLY and has a
known language extension or an explicit LANGUAGE property it should be
treated as that language. The LANGUAGE source file property
documentation says so.
9b32475 automoc: add define to test which caused bug #130182066511 automoc: fix#13018, proper cmake escaping to avoid false rebuilds
c652812 make cmLocalGenerator::EscapeForCMake() static
The variables stored in the AutomocInfo.cmake file were not properly
escaped, so when reading them back they could turn into lists, if they
contained double quotes initially.
This patch fixes this by using cmLocalGenerator::EscapeForCMake() to
escape the variables properly.
Alex
Patch by Amine Khaldi!
Also, start using the -MT flag to set a target name for depfiles.
This works around a bug observed in distcc, as explained in the
comment. Based on a patch by Alexander Usov.
Commit 9a6ff950 (Fix for bug where VS2010 did not use .obj files,
2011-04-01) assumed that if an external object is GENERATED that it is
the output of a custom command in the current target. If it is
generated by another target then VS will not automatically include the
external object in the current target. This bug was preserved by the
refactoring in the parent commit.
Instead use <None> for external objects generated by a custom command in
the current target and <Object> for all other external objects. Update
the ExternalOBJ test to cover this case.
Combine WriteCLSources and WriteObjSources into a single method. Use
the cmGeneratorTarget source classification to simplify tool selection
for each source file. Extend the classification to handle .idl files.
0cf8447 find_package: additional test for checking the error message
56ae3f9 find_package: add test for setting Foo_FOUND to FALSE in a Config file
16c0c73 find_package: allow <pkg>Config.cmake to set <pkg>_FOUND to FALSE
Alex Neundorf
Kitware Robot
David Cole
Bill Hoffman
Modestas Vainius
Brad King
Clinton Stimpson
Jim Hague
Eric NOULARD
Leonid Yurchenko
Peter Kuemmel
Rolf Eike Beer
Sean McBride
Peter Collingbourne
Stephen Kelly