Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
The API for retrieving per-config COMPILE_DEFINITIONS has long
existed because of the COMPILE_DEFINITIONS_<CONFIG> style
properties. Ensure that the provided configuration being generated
is also used to evaluate the generator expressions
in cmTarget::GetCompileDefinitions.
Both the generic COMPILE_DEFINITIONS and the config-specific
variant need to be evaluated with the requested configuration. This
has the side-effect that the COMPILE_DEFINITIONS does not need to
be additionally evaluated with no configuration, so the callers can
be cleaned up a bit too.
Generate a unique PBXTargetDependency and PBXContainerItemProxy for
every edge in the dependency graph as required by the Xcode format.
Xcode only accidentally loads project files that re-use the same
PBXTargetDependency for every edge leading to a single target. If one
is removed by hand in the IDE then Xcode may crash due to dangling
references from the others.
Since cmGlobalXCodeGenerator::AddDependTarget is called exactly once for
every edge in the target dependency graph we do not need to keep track
of which edges have been visited to avoid generating duplicates.
The modern cmComputeTargetDepends guarantees there will by no cycles.
Drop the Xcode generator's check which only handled length 1 and 2
cycles anyway.
Since the topic merged to master by commit 34a02846 (Merge topic
'ide-compiler-id', 2012-08-24), these variables are not used by
CMakeDetermine*Compiler.cmake for VS and Xcode generators. Drop the
code that sets them.
Since Xcode doesn't sort the files on its own, let's sort them in our
generator to make navigation easier. Visual Studio, QtCreator, and
kdevelop all display files sorted.
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
The 'head' is the dependent target to be linked with the current target.
It will be used to evaluate generator expressions with proper handling
of mapped configurations and is used as the source target of properties.
This requires that memoization is done with a key of a pair of target
and config, instead of just config, because now the result also depends
on the target. Removing the memoization entirely is not an option
because it slows cmake down considerably.
The Xcode generator produces FRAMEWORK_SEARCH_PATHS from:
(1) Include directories of the form /path/to/Foo.framework become
-F/path/to so '#include <Foo/H>' can find H in the framework.
(2) Linked frameworks of the form /path/to/Foo.framework become
-F/path/to -framework Foo so the linker can find the framework.
Originally commit 82bb6fae (add framework support to FIND_FILE,
2005-12-27) added these and used the (then current) old-style link
dependency analysis results to get the frameworks. Later a second
setting was added by commit 2ed6191f (add initial xcode framework stuff,
2007-05-08) to transform -F/path/to linker options produced by the old
link line generation into entries appended to FRAMEWORK_SEARCH_PATHS.
Then commit 96fd5909 (Implement linking with paths to library files,
2008-01-22) updated the second setting to directly use the results of
full modern link dependency analysis, but forgot to remove the use of
old-style link results from the original setting location.
The two settings worked together for a while, with the second one
appending to the first. Then commit f33a27ab (Generate native Xcode 3.0
and 3.1 projects, 2009-06-29) changed the internal representation format
produced by the first setting but did not update the second setting to
append to the new representation. As a result, if the first setting
added any paths (usually via the old-style link analysis) then the
second setting containing the modern link analysis results would not be
applied at all.
Fix this by removing use of the old-style link analysis results.
Replace it using the modern link dependencies and remove the second
setting altogether. Now all values for FRAMEWORK_SEARCH_PATHS are
collected in one place so no special append logic is needed.
Pass the name of the requested generator to the generator factory,
which is now responsible to check if it can create a matching
generator for the name. This allows us to add more logic to the
factory in a next step, so that not every possible generator needs
to get registered explicit in cmake::AddDefaultGenerators().
The path must be either absolute or relative to the working directory
from which the makefile will be loaded. In subprojects this is not
relative to the top of the build tree.
Reported-by: David Weese <tre@gmx.de>
Commit 08cb4fa4 (Process generator expressions in the
INCLUDE_DIRECTORIES property, 2012-09-18) contained an incorrect
assumption that CMAKE_BUILD_TYPE was set on the makefile for each
generated configuration in multi-config generators. Fix that by making
the GetIncludeDirectories API depend on the config.
083de7e Process generator expressions in the COMPILE_DEFINITIONS target property.
08cb4fa Process generator expressions in the INCLUDE_DIRECTORIES property.
0ef091d Early return if there is no target.
eb250cd Add a self-reference check for target properties.
7e80747 Add API to check that dependent target properties form a DAG.
239ac84 Add a generator expression for target properties.
e028381 Extend the generator expression language with more logic.
b8e61d6 Refactor GetCompileDefinitions a bit.
2c2b25b Return a std::string from GetCompileDefinitions.
b7e48e0 Add an AppendDefines std::string overload.
9a16087 Convert paths in INCLUDE_DIRECTORIES property to Unix slashes.
4557c8d Don't prepend a path before generator expressions in include_directories.
c6abc41 Add include guard for cmGeneratorExpression.
0ff4e3f Port remaining code to GetCompileDefinitions().
f178d53 Fix indentation in the code blocks generator.
879fd35 Revert "Move GenerateTargetManifest to cmGeneratorTarget."
6674583 Fix compiler warning with initialization order.
5285458 Add convenience for getting a cmGeneratorTarget to use.
c31f3d9 Add a wrapper for accessing config-specific compile-definitions.
d1446ca Append the COMPILE_DEFINITIONS from the Makefile to all targets.
290e92a Move GetIncludeDirectories to cmGeneratorTarget.
f9146f6 Port cmLocalGenerator::GetTargetFlags to cmGeneratorTarget.
9facfd1 Move GetCreateRuleVariable to cmGeneratorTarget.
78bfee3 Make cmLocalGenerator::AddArchitectureFlags take a cmGeneratorTarget.
4f5384e Move GetLinkInformation to cmGeneratorTarget
987e12e Move GenerateTargetManifest to cmGeneratorTarget.
14bf778 Store cmGeneratorTargets with the makefile.
f428ca2 Add more forwarding API to cmGeneratorTarget.
Multiple versions of Xcode may be installed in different locations.
Run "xcode-select --print-path" to detect the active Xcode location
and parse its Contents/version.plist file. Note that the Xcode.app
directory name may vary in developer versions.
In cmGlobalXCodeGenerator::Generate we generate a .xcodeproj for each
directory in the tree containing a project() command. First we
iteratively use SetGenerationRoot to add "ALL_BUILD" and other targets
to each project. This leaves "CurrentProject" set to the last project
when we invoke cmGlobalGenerator::Generate, which is not the same as the
top-level project if any subdirectories invoke the project() command.
When cmGlobalGenerator::Generate reaches CreateGeneratorTargets it
constructs cmGeneratorTarget and calls ComputeTargetObjects exactly once
per target. In this context the value of CurrentProject is undefined so
we cannot pass it to GetObjectsNormalDirectory. Use "$(PROJECT_NAME)"
instead so it will adapt automatically to each project.
Also teach Tests/ObjectLibrary to cover this case.
CMAKE_SHARED_LIBRARY_<lang>_FLAGS has flags on various platforms for a
variety of purposes that are correlated with shared libraries but not
exclusive to them. Refactor generation of these flags to use new
purpose-specific platform variables
CMAKE_<lang>_COMPILE_OPTIONS_DLL
CMAKE_<lang>_COMPILE_OPTIONS_PIC
CMAKE_<lang>_COMPILE_OPTIONS_PIE
Activate the DLL flags specifically for shared libraries. Add a new
POSITION_INDEPENDENT_CODE target property to activate PIC/PIE flags, and
default to true for shared libraries to preserve default behavior.
Initialize the new property from CMAKE_POSITION_INDEPENDENT_CODE to
allow easy global configuration in projects.
Although the default behavior is unchanged by this refactoring, the new
approach ignores CMAKE_SHARED_LIBRARY_<lang>_FLAGS completely. We must
leave it set in case projects reference the value. Furthermore, if a
project modifies CMAKE_SHARED_LIBRARY_<lang>_FLAGS it expects the new
value to be used. Add policy CMP0018 to handle compatibility with
projects that modify this platform variable.
Add a PositionIndependentCode test on platforms where we can get
meaningful results.
Previously, we were setting the default configuration for a generated
Xcode project to the hard-coded string "Debug" even in cases where users
customized their configuration types such that the list did not contain
"Debug". Now, we use the first string listed in CMAKE_CONFIGURATION_TYPES
as the default config for generated Xcode projects.
0f4dfa6 CPack: Use real path to PackageMaker to find its version file (#12621)
4693cf8 Xcode: Detect new default locations of Xcode 4.3 bits and pieces (#12621)
Treat OBJECT libraries as STATIC libraries. The Xcode project file
format provides no way to avoid running the libtool so hide the
resulting .a away next to the object files as it should never be
referenced. The object files will be left behind for reference by other
targets later.
Rename cmGlobalGenerator::GetCMakeCFG{InitDirectory => IntDir} to
have a shorter name without a typo. Add a 'const' qualifier since
the method is only for lookup and never needs to modify anything.
Xcode 4.3 installs into "/Applications" by default, from the Mac App Store.
Also, the paths to the available SDKs changed: they are now within the
Xcode.app bundle.
PackageMaker is installed as a separate program, and may be installed
anywhere. It is not installed with Xcode 4.3 by default anymore.
Download the "Auxiliary Tools for Xcode" to get PackageMaker.
Put PackageMaker inside the Xcode.app bundle, in its nested Applications
folder, or put it alongside Xcode in "/Applications" and CMake will find
it.
Update references to "find" paths: add new possible locations for finding
Xcode.app and PackageMaker.app. Prefer the most recent version's locations
first, but keep the old locations as fallback search paths, too.
Thanks to all the contributors who provided and tested out various patches
for fixing this issue. Especially, but by no means limited to:
Francisco Requena Espí, Jamie Kirkpatrick and drfrogsplat.
Remove partial implementation added by commit ca0230a3 (check in initial
conv library stuff, 2007-02-16) since it was never finished. It does
not make sense for multi-configuration generators since no specific
build configuration is processed at CMake time.
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
Generate the rerun dependency file for the top-level project() and each
subdirectory project() into the corresponding build directory. Do not
clobber them all with the one for the last subproject. This mistake was
left from when the Xcode generator did not produce subprojects.
90efed6 Xcode: Honor Fortran_FORMAT target and source file property
5c0c635 Fortran: Add support for free- and fixed-form flags
47a0c75 VS: Map Fortran free- and fixed-format flags to IDE options
d6e2a06 VS: Map per-source Fortran flags to IDE options
For project and target objects, save their ids in CMakeCache.txt.
Hopefully, that will be enough to allow user settings to be saved
across multiple CMake generate operations. Other object types may
also need their ids saved: if so, more code than this commit
will be necessary...
f09ba0f Fix style errors added by parent and grandparent
eeeeca1 XCode: Support target folders on XCode.
59ed84e Xcode: Support multiple level nesting of XCode folders (#10039)
d0a403f CMake: Move tokenize to cmSystemTools
A post-build phase of each target invokes the XCODE_DEPEND_HELPER.make
file to erase any targets that link to it. Narrow the set of targets
tested by each post-build phase to those that depend on the newly
completed target. This avoids removing files from partially built
unrelated targets that happen to be building in parallel.
Previously the Xcode generator would rerun CMake only if input file
dependencies in the top-level directory changed. Teach it to depend on
input files from all directories. Other generators already do this.
Reported-by: Johan Björk <phb@spotify.com>
The Makefile, VS, and Xcode generators previously duplicated some custom
command line generation code. Factor this out into a separate class
cmCustomCommandGenerator shared by all generators.
Reverting abandoned topic xcode_source_group_fix_7932 left this source
slightly different due to trailing whitespace removal on some lines.
Remove all trailing whitespace from the file to make it consistent.
With CMAKE_OSX_ARCHITECTURE settings such as $(ARCHS_STANDARD_32BIT),
the space inserted by the for loop would confuse Xcode if quoted. In
this particular example, what would be output would be:
ARCHS = "$(ARCHS_STANDARD_32BIT) ";
The Xcode UI does not recognize this as the built-in "Standards 32-bit"
architecture setting unless the space is removed.
Factor out reading of CMAKE_CONFIGURATION_TYPES and CMAKE_BUILD_TYPE
into cmMakefile::GetConfigurations. Read the former only in
multi-config generators.
The LINK_FLAGS property is defined only for targets that really link.
These include executables and shared libraries. For static libraries we
define the STATIC_LIBRARY_FLAGS property. Teach the Xcode generator to
make this distinction.
Previously the Xcode generator set SYMROOT to be the target output
directory. This told Xcode to put the "<proj>.build" directory in the
output path too.
This commit sets SYMROOT, CONFIGURATION_BUILD_DIR, and OBJROOT to put
intermediate files in the build directory corresponding to the source
directory that created each target. This is more consistent with the VS
IDE generators. Now only the build output files (actual targets) go to
the target output directory.
The commit "Set version info for shared libs on OSX" taught the Xcode
generator to honor VERSION and SOVERSION properties. However, it also
set version '1.0.0' as the default when no version property is set,
which is inconsistent with the Makefiles generator. This commit fixes
the default to '0.0.0' for consistency.
See issue #9773.
Intel Fortran on Mac OS X enables Fortran support in Xcode. This commit
teaches CMake to associate Fortran sources properly in Xcode projects.
See issue #9739.
The CMAKE_OSX_ARCHITECTURES variable works only as a global setting.
This commit defines target properties
OSX_ARCHITECTURES
OSX_ARCHITECTURES_<CONFIG>
to specify OS X architectures on a per-target and per-configuration
basis. See issue #8725.
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
Xcode 1.5 writes helper scripts at the projectDirPath location for
targets that do not set SYMROOT. We now add SYMROOT to custom targets
so that all targets set it. This prevents Xcode 1.5 from touching the
source directory now that we always set projectDirPath.
See issue #8481.
Xcode project source file references need to always be relative to the
top of the source tree in order for SCM and debug symbols to work right.
We must even allow the relative paths to cross outside of the top source
or build directories.
For subdirectory project() command Xcode projects we use the source
directory containing the project() command as the top. Relative paths
are generated accordingly for each subproject.
See issue #8481.
This subclass of cmGlobalXCodeGenerator only provided two virtual method
overrides, and it made construction of the Xcode generator instance
complicated. This commit removes it and replaces the virtual methods
with tests of the Xcode version. The change removes duplicate code.
Xcode does not seem to support direct requests for using the linker for
a particular language. It always infers the linker using the languages
in the source files. When no user source files compile with target's
linker language we add one to help Xcode pick the linker.
A typical use case is when a C executable links to a C++ archive. The
executable has no C++ source files but we need to use the C++ linker.
This passes the build configuration to most GetLinkerLanguage calls. In
the future the linker language will account for targets linked in each
configuration.
This simplifies computation of the lastKnownFileType attribute for
header files in Xcode projects. We now use a fixed mapping from
header file extension to attribute value. The value is just a hint to
the Xcode editor, so computing the target linker language is overkill.
This method previously required the global generator to be passed, but
that was left from before cmTarget had its Makefile member. Now the
global generator can be retrieved automatically, so we can drop the
method argument.
Xcode 2.0 and below supported only one configuration, but 2.1 and above
support multiple configurations. In projects for the latter version we
have been generating a "global" set of buildSettings for each target in
addition to the per-configuration settings. These global settings are
not used by Xcode 2.1 and above, so we should not generate them.
The cmGlobalXCodeGenerator::CreateBuildSettings had the three arguments
productName, productType, and fileType that returned information used by only
one of the call sites. This change refactors that information into separate
methods named accordingly.
Previously we named Xcode targets using the output file name from one of the
configurations. This is not very friendly, especially because it changes with
CMAKE_BUILD_TYPE. Instead we should use the original logical target names for
the Xcode target names. This is also consistent with the way the other IDE
generators work.
CMake previously generated Xcode project files labeled as 2.4-compatible
by recent versions of Xcode (3.0 and 3.1). It is better to generate
native Xcode 3.0 and 3.1 projects. In particular, this can improve
build times by using the "Build independent targets in parallel"
feature.
Patch from Doug Gregor. See issue #9216.
Long ago the native build system generators needed HEADER_FILE_ONLY to
be set on header files to stop them from building. The modern
generators correctly handle headers without the help of this property.
This removes automatic setting of the property so that it can be used
reliably as an indicator of project author intention. It fixes VS IDE
project files to show header files normally instead of excluded (broken
by the fix for issue #7845).
Previously cmTarget::GetLocation and cmTarget::GetFullPath would return
for Mac AppBundles the top-level bundle directory but without the .app
extension. We worked around this at the call sites. This fixes the
methods and removes the work-arounds. See issue #8406.
In cmGlobalGenerator we use cmComputeTargetDepends to construct a safe,
non-circular set of inter-target dependencies. This change enables use
of the results by the Xcode generator. It also removes a lot of old
code and another use of the old-style linking logic. See issue #7652.
A Mac OS X Framework should provide a Resources/Info.plist file
containing meta-data about the framework. This change generates a
default Info.plist for frameworks and provides an interface for users to
customize it.
This change cleans up the implementation of cmXCodeObject to avoid
un-escaping and re-escaping string values. There is no need to store
the string in escaped form. It can be escaped once when it is printed
out to the generated project file.
- The Info.plist file in app bundles should not be built.
- User-specified files such as foo.txt should not be built.
- Only files with a recognized language should be built,
just as in the Makefiles generators.
- See bug #7277.
- Generated Xcode projects for application bundles list the
CMake-generated Info.plist input file as a resource.
- The location of the input file was moved by a previous commit,
but the reference to it as a resource file was not updated.
- This change moves the file to CMakeFiles/<tgt>.dir/Info.plist
to give it a more intuitive name in the Xcode project.
- We also update the reference to point at the correct location.
- See bug #7277.
- The Xcode generator creates one Info.plist input file which is
converted at build time by Xcode and placed in the final bundle.
- The <CONFIG>_OUTPUT_NAME target property can place different content
for the exe name in Info.plist on a per-configuration basis.
- Instead of generating a per-config Info.plist input file just let
Xcode put the name in at build time using the $(EXECUTABLE_NAME) var.
Brad King
Petr Kmoch
Stephen Kelly
Alexander Chehovsky
Robert Maynard
Patrick Gansterer
David Cole
Jan Schaffmeister
Johan Bjork
Sean McBride
Richard Bateman
Ben Boeckel
Mikkel Krautz
Bill Hoffman