When the COPY_FILE operation fails optionally capture the error message
with a COPY_FILE_ERROR option instead of reporting the error
immediately. This gives callers a chance to do something else or report
the error.
Teach the RunCMake.try_compile test to cover bad argument combinations
involving COPY_FILE_ERROR. Teach the TryCompile test to cover the case
of a COPY_FILE error message captured by COPY_FILE_ERROR.
Copy cmGlobalVisualStudio11Generator to cmGlobalVisualStudio12Generator
and update version numbers accordingly. Add the VS12 enumeration value.
Add module CMakeVS12FindMake to find MSBuild. Look for MSBuild in its
now-dedicated Windows Registry entry. Teach the platform module
Windows-MSVC to set MSVC12 and document the variable. Teach module
InstallRequiredSystemLibraries to look for the VS 12 runtime libraries.
Teach tests CheckCompilerRelatedVariables, Preprocess, VSExternalInclude,
and RunCMake.GeneratorToolset to treat VS 12 as they do VS 10 and 11.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
Extend the signature
try_compile(RESULT_VAR <bindir> <srcfile> ...)
to allow multiple sources as
try_compile(RESULT_VAR <bindir> SOURCES <srcfile>... ...)
Process the sources to generate a CMakeLists.txt that enables all needed
languages.
Teach the TryCompile test to try cases with two sources of the same
language and of mixed languages. Teach RunCMake.try_compile to cover
error cases for the signature.
Use makefile->IssueMessage() to print the unprocessed watch message in a
format consistent with other CMake messages and with a more complete
call stack for the access.
When a watch does not specify a command to call then variable_watch
prints out a message to stderr. Remove code after that which collects
all variable values to construct a message that is never printed.
Otherwise such code causes a READ_ACCESS watch to trigger on all
variables in the currents scope.
Reported-by: Yichao Yu <yyc1992@gmail.com>
This is initialized by CMAKE_<LANG>_VISIBILITY_PRESET. The target
property is used as the operand to the -fvisibility= compile option
with GNU compilers and clang.
Process all arguments in a single loop using a simple state machine.
While at it, fix some error message typos. Also allow LINK_LIBRARIES
with no actual libraries to disable use of the -DLINK_LIBRARIES=...
from the CMAKE_FLAGS. This was already possible in the old logic if
LINK_LIBRARIES was immediately followed by another keyword argument
instead of the end of the argument list, so allow it in general.
Update the RunCMake.try_compile test cases accordingly.
7378792 if: Add test for IS_DIRECTORY
4ab10e0 Merge branch 'master' into fix-FileIsDirectory-SEGV
045d6ae KWSys: Fix SystemTools::FileIsDirectory with long paths (#14176)
Add a RunCMake.if test to cover if() command behavior. Start with a
test for IS_DIRECTORY cases with an existing directory and a long path,
both with a trailing slash.
The ExternalData_LINK_CONTENT option tells ExternalData to convert real
data files it finds into content links and to "stage" the original
content in a ".ExternalData_<algo>_<hash>" file. However, after a data
object has been staged it is possible that a user-provided pattern in
the "REGEX:" option will later match the staged object file. We must
not process staged object files even when a user pattern matches them.
Fix the implementation to not match a staged object file as a normal
data file for conversion. Extend the RunCMake.ExternalData test to
cover this case.
The idea is to write to a temp file which contains generator
expressions, and at generate time, evaluate the generator expressions,
and write the result to a file.
Because executables on Windows are limited in the length of command line
it is possible to use, it is common to write command line arguments to a
file instead and specify the file as a source of arguments.
This new FILE(GENERATE) subcommand allows the use of generator
expressions to create such files so that they can be used with
add_custom_command for example.
Commit b8259c3d (Centralize maintenance of usage requirement include
directories, 2013-04-29) changed the handling of the property.
Previously setting the property directly instead of via
target_link_libraries would not result in transitive include
directory handling.
When called with a non-existent LHS target name the user may be trying
to add file-level dependencies. Clarify the error message to explain
the difference between target-level and file-level dependencies. Point
the reader at the commands and options needed for the latter.
The commit to add the INTERFACE_QT_MAJOR_VERSION in qtbase.git
is 14054d45 (Set the INTERFACE_QT_MAJOR_VERSION to 5., 2013-03-16)
which will be part of Qt 5.1.0.
If there is a Qt 5.0.3 release, there is no guarantee it will
contain that commit. Make sure such a Qt version does not fail
with this test if not.
We can do this check only if the TargetName is non-empty, which means
that we're evaluating INTERFACE_INCLUDE_DIRECTORIES from a linked
dependency which was set using target_link_libraries.
It is possible to have relative paths in INCLUDE_DIRECTORIES already
in CMake 2.8.10.2, so that part will require a policy to fix.
It is considered an error if the INTERFACE_INCLUDE_DIRECTORIES contains
a directory which does not exist, which indicates a programmer error
by the upstream, or a packaging error.
One of the RunCMake.CompatibleInterface tests also needs to be updated
due to this change. Non-existant includes were used in the test, but
are not needed.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
d90f49b CTest: Fail early without PROJECT_BINARY_DIR (#14005)
2e1c2bd build_command: Fail early without CMAKE_MAKE_PROGRAM (#14005)
4e5cb37 Refactor RunCMake.build_command test to allow more cases
Do not use PROJECT_BINARY_DIR before it is defined. If it is not
defined when needed, fail with an error message suggesting that the
project() command be invoked first.
If CMAKE_MAKE_PROGRAM is not set fail with an error message instead of
crashing. Suggest calling project() or enable_language() first to
ensure that CMAKE_MAKE_PROGRAM is set.
Move the ErrorsOFF/ON common logic from CMakeLists.txt into an
ErrorsCommon file to allow other test cases to be added that do not use
the Errors test logic.
The CMake language implicitly flattens lists so a ";" in a list element
must be escaped with a backslash. List expansion removes backslashes
escaping semicolons to leave raw semicolons in the values. Teach
ExternalData_Add_Test and ExternalData_Expand_Arguments to re-escape
semicolons found in list elements so the resulting argument lists work
as if constructed directly by the set() command.
For example:
ExternalData_Add_Test(Data NAME test1 COMMAND ... "a\\;b")
ExternalData_Expand_Arguments(Data args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
should be equivalent to
set(args1 "a\\;b")
add_test(NAME test1 COMMAND ... ${args1})
set(args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
which is equivalent to
add_test(NAME test1 COMMAND ... "a;b")
add_test(NAME test2 COMMAND ... "c;d")
Note that it is not possible to make ExternalData_Add_Test act exactly
like add_test when quoted arguments contain semicolons because the CMake
language flattens lists when constructing function ARGN values. This
re-escape approach at least allows test arguments to have semicolons.
While at it, teach ExternalData APIs to not transform "DATA{...;...}"
arguments because the contained semicolons are non-sensical.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
Move the Tests/FPHSA_InvalidFOUND_VAR test case over to a new
RunCMake.FPHSA test with a BadFoundVar case. The RunCMake tests are
built to cover failure cases easily and robustly.
e83e6a1 Test Unix Makefiles generator support for changing compilers
c307e1c Tests/RunCMake: Allow tests to control build tree behavior
2963c98 Merge branch 'empty-compiler-crash' into compiler-change-cleanup
1df09e5 Delete entire CMakeFiles directory when deleting CMakeCache.txt (#13756)
Add RunCMake.CompilerChange test to cover use of -DCMAKE_C_COMPILER=cc
to change the compiler of an existing build tree. Also test for proper
failure with -DCMAKE_C_COMPILER="" and no CC in the environment.
This is a partial revert of commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05).
As the interface includes and defines are now determined by the link
closure, there is no need to populate the corresponding properties
explicitly.
Brad King
Stephen Kelly
Andreas Mohr