415900ba77
Eliminate -Wconversion warnings.
...
Change types of local variables, or casting, or re-arrange
expressions to get rid of "conversion may alter value" warnings
as seen on recent dashboard submissions from londinium.kitware.
2010-06-27 11:22:05 -04:00
960dc2b10f
Do not exit if stoptime is passed.
2010-06-15 10:29:35 -04:00
767ffba8ff
Added RESOURCE_LOCK test property.
2010-03-02 15:38:02 -05:00
b4d27dc041
Use historical average of test times to schedule tests.
2010-02-26 11:02:05 -05:00
ff916b48bd
CTest output submitted to the dashboard is now compressed by default.
2009-12-17 11:14:49 -05:00
9add940eb6
Added an option to conditionally attach files to a test submission only if the test does not pass. Also some preliminary changes for test output compression.
2009-12-16 14:50:16 -05:00
5bfe1a1962
Changed XML formatting of files attached to test so that each file is archived and marked up individually, in order to make things easier on the CDash side. Also switched to using the NamedMeasurement tag instead of a new tag.
2009-12-15 14:24:24 -05:00
dc66139f7c
CTest-side changes to allow users to attach arbitrary files to test results that will be submitted to cdash using the ATTACHED_FILES test property.
2009-12-15 12:07:15 -05:00
4de7cc3621
Unfortunately, I noticed the comment on bug 8668 too late. This changes my last implementation of the exe wrapper to something which makes much more sense: a REQUIRED_FILES property on tests.
2009-12-10 15:37:04 -05:00
48b6133928
[0008668: CTest Dev: Missing executables shown as failed tests when using MPI.] Added a wrapping option to add_test so that exes built by the project can be safely wrapped in other exes and be listed as "not run" rather than "failed" if they are not built.
2009-12-10 14:38:32 -05:00
c32088cfee
Local test timeouts will now always take precedence over the global --timeout option.
2009-12-08 10:26:43 -05:00
b30f627190
CMake global timeout (--timeout option) should prevail over individual test timeouts if it is lower than the individual timeout.
2009-12-07 13:25:54 -05:00
22c37b2b19
Hanle the case where a test can not be run because it is a bad executable.
2009-12-02 16:37:43 -05:00
a52c0118d4
Added the --timeout option to ctest command line. This sets a global timeout on all tests if no more specific timeout is set on them.
2009-11-30 16:08:11 -05:00
c9c0ee4056
Change logic of ctest subdirs command to allow for absolute paths. Also added test coverage for passing absolute paths to subdirs.
2009-11-10 10:40:24 -05:00
17afd5257b
Bug 9090: CTest does not handle absolute paths in CTestTestfile SUBDIR( ) entries.
...
The ctest subdirs command now checks the relative path first, and if that does not exist, also checks if the given path was absolute. Thanks vodall for the patch.
2009-11-09 14:07:36 -05:00
8612aa10b6
Hook for scheduling tests in a random order
...
This may help statistically detect implicit dependencies among unit
tests while running in parallel.
2009-10-29 15:30:12 -04:00
7fd3d7cf80
BUG: #0009648 Change "The following tests FAILED" message to print on stdout rather than stderr
2009-10-05 12:47:09 -04:00
ccb0cf1306
Fix warnings in CMake source code.
2009-10-02 15:30:01 -04:00
96afb12087
Convert CMake to OSI-approved BSD License
...
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
2009-09-28 11:43:28 -04:00
8a690289c2
Add label summary times to ctest default output. Also, remove parallel time output. Add flag to disable label summary.
2009-09-11 13:34:35 -04:00
4b4e801eba
BUG: Fixed segfault and bad reporting if a ctest executable could not be found. Also added some batch testing code that is not yet complete.
2009-09-10 11:16:08 -04:00
a516040579
ENH: ctest now writes time cost data to a file after a test set is run, and uses these time costs to schedule the processes the next time ctest is run in that build tree.
2009-09-08 17:10:35 -04:00
39e5f9d963
ENH: Replaced the EXPENSIVE test property with a COST test property taking a floating point value. Tests are now started in descending order of their cost, which defaults to 0 if none is specified.
2009-09-08 13:39:13 -04:00
5fb958fde9
ENH: Added ctest test options PROCESSORS and RUN_SERIAL. These allow specification of resource allocation for given tests running with the ctest -j N option. RUN_SERIAL ensures that a given test does not run in parallel with any other test. Also forced appending of "..." to the longest test name in ctest.
2009-09-07 10:26:17 -04:00
c6e5dd21fd
Added the test property EXPENSIVE, which denotes that the given test(s) should be started prior to tests that are not marked as such. Also fixed test dependencies, and a few uninitialized variables in cmProcess.
2009-09-04 10:16:06 -04:00
20713ab89d
Fixed warnings
2009-09-03 11:14:13 -04:00
659171d1f7
ENH: Added PARALLEL_LEVEL option for ctest_memcheck(). Added PROCESSORS option to set_tests_properties (implementation to come).
2009-09-03 10:47:14 -04:00
7e20db0224
ENH: Added PARALLEL_LEVEL option to ctest_test() command.
2009-09-02 12:35:42 -04:00
59b34a6a1a
Fixed Dart time recording for ctest
2009-08-31 10:28:39 -04:00
5a5cc52230
Fixed conversion warning on 64 bit machines
2009-08-31 09:50:35 -04:00
b0b5ffcf5c
MemCheck should now work again in ctest
2009-08-28 15:08:03 -04:00
b427d1985e
Added ctest -N test. Fixed ctest working directory bug. MemCheck fix coming soon...
2009-08-28 11:08:39 -04:00
177edc5ed1
Fixed ctest -N segfault issue. Further refactored ctest. Enabled failover for ctest
2009-08-27 10:37:30 -04:00
8ffd8d0a03
ENH: refactored ctest. All testing is now parallel. If no -j option is specified, defaults to a MP level of 1 (non parallel)
2009-08-26 12:09:06 -04:00
a2ef34d344
Fixed overwriting of a previous change set
2009-08-19 09:24:55 -04:00
b9daa192af
ENH: Refactored CTest test execution code into an object
2009-08-19 08:58:36 -04:00
c02c8c287c
Add test times to log file as well as the stdout.
2009-08-18 14:03:50 -04:00
3c34d0440c
If labels are found on the tests, then print a time summary for all the tests run with each label.
2009-08-18 13:34:05 -04:00
a696fe8183
Output total time when using -j N
2009-08-11 22:02:49 -04:00
e9d7ebb3ec
BUG: Do not double-initialize local generators
...
All global generator CreateLocalGenerator methods automatically
initialize the local generator instances with SetGlobalGenerator. In
several places we were calling SetGlobalGenerator again after receiving
the return value from CreateLocalGenerator. The double-initializations
leaked the resources allocated by the first call to SetGlobalGenerator.
This fix removes the unnecessary calls.
2009-07-28 10:47:02 -04:00
40850e7f1f
ENH: add test times and a total time to the output of command line ctest
2009-07-27 14:17:38 -04:00
a5b06dcbb6
ENH: fix warning
2009-07-19 13:40:38 -04:00
eb5d0a7f61
ENH: fix warning
2009-07-17 16:15:11 -04:00
3250cb3d3b
ENH: compute the max test name width based on the length of the tests
2009-07-17 10:06:38 -04:00
5b51ad580b
ENH: Reports "Passed" for WILL_FAIL tests
...
Previously tests marked with WILL_FAIL have been reported by CTest as
...............***Failed - supposed to fail
when they correctly failed. Now we just report ".....Passed" because
there is no reason to draw attention to something that works as
expected.
2009-07-02 16:13:55 -04:00
3043ddf144
BUG: #8611 add pass fail reasons into log file
2009-02-27 16:28:07 -05:00
3b73cdc89f
ENH: add a CDash measured value showing the reason for passed and failed tests based on regular expressions
2009-02-24 17:23:51 -05:00
4e710a9ebe
ENH: add the ability to run tests by labels
2009-02-10 14:24:24 -05:00
dc13914cd6
ENH: Create cmXMLSafe to help escapes in XML
...
This class provides easy syntax to efficiently insert blocks of data
into XML documents with proper escapes. It replaces the old
cmCTest::MakeXMLSafe and cmSystemTools::MakeXMLSafe methods which
allocated extra memory instead of directly streaming the data.
2009-02-05 16:31:37 -05:00
David Cole
Zach Mullen
Bill Hoffman
Brad King