Since commit e03f83f3 (ProcessorCount test: fix path to cmsysTestsCxx
executable, 2013-01-24) the directory references a target that is not
built when BUILD_TESTING is OFF. It makes no sense to add tests without
BUILD_TESTING anyway.
While at it, use add_subdirectory instead of subdirs to add CMakeTests.
Commit 79568f95 (automoc: Add source file to target early to set the
linker language, 2013-02-20) changed automoc initialization to a two
step process. In the first step, the generated source file was added
to the target, which allows the link language to be determined.
However, this bypassed the check for the availability of Qt itself.
At build-time the automoc file could not be generated because the moc
tool was not available to create it.
The solution is to only add the automoc file to the target if Qt is
found.
Extend the Module.ExternalData test to cover a DATA{} reference whose
name contains a space. Skip the case when the native build tool does
not support spaces.
Some make tools do not support spaces inside the source tree paths.
Decide early whether to add tests that depend on support for spaces so
we can use the result in a decision for any test.
All ctest --build-and-test invocations require the options
--build-generator ${CMAKE_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
to be passed and have consistent values, except for a few special cases.
Collect the generator options in a variable instead of repeating the
options everywhere explicitly.
5484c60 Merge branch 'vs6-rule-files' into add-ExternalData-module
1fd8d01 ExternalData: Attach download rules to content links in IDEs
a6d3ffc Fix Module.ExternalData test on VS 6
aed590a Fix Module.ExternalData test on Cygwin
06e8ded Merge branch 'fix-atomic-rename-on-Windows' into add-ExternalData-module
e2e0d2e ExternalData: Collapse ../ components in DATA{} paths
ee2abfd ExternalData: Add support for SHA 1 and 2 hash algorithms
aa8b228 ExternalData: Generalize hash algo/ext handling
9e518a8 ExternalData: Allow DATA{} syntax to reference directories
175ed02 ExternalData: Allow ()-groups in series match regex
4befecc ExternalData: Add tests covering interfaces and errors
bcd2580 ExternalData: Improve series matching using an explicit syntax
c0cebcb ExternalData: Remove unused private interface
5275993 ExternalData: Cleanup stray TODO and typo in comments
7bb8344 ExternalData: Do not match directory names when resolving DATA{}
00d801f ExternalData: Remove compatibility with CMake < 2.8.5
...
Run the test with the ctest --build-noclean option. The test
CMakeLists.txt file already uses file(REMOVE_RECURSE) to clean out
downloaded data anyway. Some file removed by "msdev ... /clean" causes
CMake to re-run in the middle of the build step and file(REMOVE_RECURSE)
wipes out already-generated files.
The test added by commit e378ba5f (Add CTestLimitDashJ test, 2012-12-26)
crashes with CTest compiled by Borland 5.8. There seems to be interaction
among the large number of internal ctest runs. It is probably related to
the undiscovered underlying issue mentioned in commit 32478069 (CTest:
Prevent creation of unbounded number of tests in ctest, 2012-12-18) when
fixing the symptom covered by the CTestLimitDashJ test.
Add --force-new-ctest-process to avoid the crash. Further investigation
will still be needed to identify the true problem.
Add a Module.ExternalData test to verify data retrieval and test
argument DATA{} references.
Add a RunCMake.ExternalData test to verify error handling and automatic
transformation of a raw data to a content link and staged object.
This means for example, that consumers can use:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES})
instead of also needing to specify all 'public' dependencies:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES} ${QT_QTCORE_LIBRARIES} )
when using the IMPORTED targets. Also populate the
IMPORTED_LINK_DEPENDENT_LIBRARIES property so CMake can help the linker
find shared library dependencies.
Add a test that verifies that when ctest -j 4 is called, at most, 4 tests
are executed at any one time.
The test works by running the same script as each of 100 tests. And then setting
up test properties for DEPENDS, RUN_SERIAL, PROCESSORS and COST in order to get
the tests to run in a semi-deterministic ordering, even in parallel. The script
writes a file, sleeps for a bit, and then deletes the file. In the meantime, it
counts files that currently exist, and emits output that triggers a test failure
if the count of files is ever greater than 4.
Prior to the commit that fixed bug #12904, this would result in a failed test
because the output of some of the tests would indicate that more than 4 tests
were running simultaneously.
Now that this issue is resolved, this test will help guarantee that it stays
resolved moving forward.
This new CPack generator produces an *.msi installer file.
Requires having the WiX Toolset installed in order to work
properly.
Download the WiX Toolset installer "WiX36.exe" here:
http://wix.codeplex.com/releases/view/93929
These tests were not running properly on Visual Studio or
Xcode dashboards before this commit because of the "Debug"
or "Release" sub-directory. The scripts already have
CMAKE_CPACK_COMMAND since the correct CMake executable is
used to run the scripts, so just use that, rather than
passing down an incorrect path to the CPack executable.
a41d3a4 ExternalProjectUpdateTest: Only support Git 1.6.5 and greater.
de760c1 ExternalProject: Verify when a fetch occurs during update test.
0a34433 ExternalProject: Make sure the ExternalProjectUpdate setup is available.
9b66c8f ExternalProject: Always do a git fetch for a remote ref.
2619f4d ExternalProject: Add tests for UPDATE_COMMAND.
378aa12 ExternalProject: Do smoke tests for Git Tutorial builds.
d075829 ExternalProject: Only run 'git fetch' when required.
This prepares the numberous tests that occur in the ExternalProjectUpdate
test. The tests were passing previously because a fresh build was not performed.
Tests are added for UPDATE_COMMAND to ensure it is working properly. Testing
infrastructure is added along with tests for Git, but tests for other version
control systems could easily be added in the future.
995a35f CTest: add a check with a quoted memory checker
de8bffc CTest: add a test for CTEST_CUSTOM_MEMCHECK_IGNORE
d26c9b6 CTest: improve memory checker type detection
fcae1da CTest: add tests that simulate memcheck runs
6187876 CTest: fix pre and post test commands with spaces
95bc8aa CTest: fix usage of memory checker with spaces in path
Move it out of the condition that also accepts MinGW/MSYS.
Teach the test to allow the Intel for Windows compiler but
do not verify the results because the compiler does not
seem to write PDB output in all cases.
This enables changing the name and output folder of the debug symbol
files produced by MS compilers.
Inspired-by: Thomas Bernard <thomas.bernard@ipetronik.com>
f0a1065 Rename files from main.cpp to more meaningful names.
ca7fb14 Fix the test setting COMPILE_DEFINITIONS target property
733deb6 Fix CompileDefinitions test on Visual Studio.
3dae652 Don't duplicate -D defines sent to the compiler.
There is no need to do so. Be consistent with include directories and
ensure uniqueness.
This requires changing the API of the cmLocalGenerator::AppendDefines
method, and changing the generators to match.
The test unfortunately can't test for uniqueness, but it at least verifies
that nothing gets lost.
Add generator expressions that combine and use boolean test results:
$<0:...> = empty string (ignores "...")
$<1:...> = content of "..."
$<AND:?[,?]...> = '1' if all '?' are '1', else '0'
$<OR:?[,?]...> = '0' if all '?' are '0', else '1'
$<NOT:?> = '0' if '?' is '1', else '1'
These will be useful to evaluate (future) boolean query expressions and
condition content on the results. Include tests and documentation.
After conversion of Modules .cmake files to lower case the
FAIL_REGULAR_EXPRESSION for this test matched warnings in modules other
than the test line itself. Make the pass and fail regular expressions
specific to the file containing the lines they are testing.
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the
block. This is no longer the preferred style.
Run the following shell code:
for c in else endif endforeach endfunction endmacro endwhile; do
echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
egrep -z -v 'Tests/CMakeTests/While-Endwhile-' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
1fc8df9 Add missing this->.
7a3ecf5 Fix memory leak in Makefile generator.
9f7dc83 Ninja: also bootstrap ninja files
5d365b2 Ninja: enable ninja support everywhere
d569f3e Ninja: void function can't return a value
52160bf Ninja: enable ninja on Mac so all Mac CDash-builds are tested, cleanup later
56aeac6 Ninja: fixes for bcc
7a6bc9e Ninja: remove 'this' from member initializer list
44ba4cf Ninja: remove warnings
7751966 Ninja: remove 'friend' in ninja code
c3988ee Re-factor OS X content generator start up.
f8e0a51 Re-factor framework directory computation.
f36c7b0 Re-factor Mac OS X content directory computation.
5d885db Re-factor bundle content copying rules generation.
3b2a01e Ninja: Use same echo message as makefiles.
7bb56c5 Re-factor CFBundle generation.
...
b47cffa CPack: Use bin subdir when looking for dpkg and rpmbuild
a8c659c Find dpkg and rpmbuild in usual Fink and MacPort paths
848f220 Do not run cpack at CMake time it is not available.
cpack was used to get the list of available i.e. ACTIVE CPack generators
in the CMake tests suite. This was done in order to get dynamically
available CPack generators like DEB or RPM that may or may not be
available on some platform like MacOSX depending on the fact that
some command are installed or not. We may do that but not during
initial configuration.
The current patch fixes the problem and we may do better in the future
like configuring CPack tests later.
bd34963 Refactor generation of shared library flags
55d7aa4 Add platform variable for flags specific to shared libraries
31d7a0f Add platform variables for position independent code flags