In commit 0c727b90 (install(EXPORT): Force absolute paths for usr-move,
2013-03-08) and commit d4774140 (configure_package_config_file: force
absolute paths for usr-move, 2013-01-24) we supported Linux
distributions implementing the "/usr move" by assuming that installation
to (/usr)?/lib(64)? represents a non-relocatable system package.
When cross-compiling one may prepare a package for installation into a
system location on a target machine but install the package files on the
*host* machine inside another path for use with CMAKE_FIND_ROOT_PATH.
In this case the package development files must still be relocatable.
Handle "/usr move" with a new approach that works with relocatable
files. Teach configure_package_config_file and install(EXPORT) to
generate special logic in a package configuration file or targets file
for installation under (/usr)?/lib(64)?. Teach the file to recognize
when it is loaded through a symlink that refers to the same realpath as
its original install destination. In such a case, use the original
install prefix. Otherwise, compute the prefix relative to the current
file location to make it relocatable.
In VS IDE generators add a pre-build event to perform automoc instead of
using a separate custom target. This reduces the number of targets in the
.sln that need to be loaded by the IDE.
This also works around a VS 11 bug as discussed in issue 13900.
Suggested-by: Hauke Heibel <hauke.heibel@gmail.com>
When called with a non-existent LHS target name the user may be trying
to add file-level dependencies. Clarify the error message to explain
the difference between target-level and file-level dependencies. Point
the reader at the commands and options needed for the latter.
We can do this check only if the TargetName is non-empty, which means
that we're evaluating INTERFACE_INCLUDE_DIRECTORIES from a linked
dependency which was set using target_link_libraries.
It is possible to have relative paths in INCLUDE_DIRECTORIES already
in CMake 2.8.10.2, so that part will require a policy to fix.
It is considered an error if the INTERFACE_INCLUDE_DIRECTORIES contains
a directory which does not exist, which indicates a programmer error
by the upstream, or a packaging error.
One of the RunCMake.CompatibleInterface tests also needs to be updated
due to this change. Non-existant includes were used in the test, but
are not needed.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
The VS version we generate in the .sln header is used by VS when opening
the file through Windows Explorer and possibly elsewhere. Fix our
generators to use version strings known to VS to avoid a drop-down box.
For VS 10, since commit 4f96af44 (Fix VS 10 .sln files for Windows
Explorer, 2009-10-22) we use "Visual Studio 2010" instead of just
"Visual Studio 10". This is correct except that for the Express edition
we need "Visual C++ Express 2010".
For VS 11, since commit f0d66ab4 (VS11: Fix comment generated at the top
of *.sln files, 2011-10-20) we use "Visual Studio 11" in the .sln header
but the preferred value is "Visual Studio 2012" (just as the first
commit mentioned above fixed for VS 10). Also for the Express edition
we need "Visual Studio Express 2012 for Windows Desktop".
The API for retrieving per-config COMPILE_DEFINITIONS has long
existed because of the COMPILE_DEFINITIONS_<CONFIG> style
properties. Ensure that the provided configuration being generated
is also used to evaluate the generator expressions
in cmTarget::GetCompileDefinitions.
Both the generic COMPILE_DEFINITIONS and the config-specific
variant need to be evaluated with the requested configuration. This
has the side-effect that the COMPILE_DEFINITIONS does not need to
be additionally evaluated with no configuration, so the callers can
be cleaned up a bit too.
In some languages the compiler may need to know the path of the final
target file for which an object is being compiled. Honor the <TARGET>
placeholder for compilation rules to support such cases.
Note that this cannot work with OBJECT library targets because the final
target path is not known during compilation (there can even be more than
one final target).
Suggested-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The commit d2536579 (Automoc: fix regression #13667, broken build in
phonon, 2012-11-19) changed Automoc to try to re-add the Qt header dir
if it was stripped out as an implicit include from the moc command
line. When invoking a compiler, those directories are stripped out
because they are built-in, but for moc, there are no built-in directories.
The follow-up commit acc22400 (Automoc: get include dirs without
stripping implicit include dirs off, 2012-12-07) went further by not
removing the implicit include dirs, if they were specified specifically
by the user.
This had the remaining problem that the implicit include dirs appeared
in a different order of precedence for moc compared to the compiler.
Resolve that by stripping out the include dirs, where specified for
the moc command line to, and then appending them at the end. Note that
the order of the appended implicit include directories is the order
they are specified in the CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES, not
the order specified by the user.
Rename the variable added by commit 9ce1b9ef (Add
CMAKE_BUILD_INTERFACE_INCLUDES build-variable, 2012-11-25) to
CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE to be more consistent with the
existing CMAKE_INCLUDE_CURRENT_DIR variable.
Suggested-by: Alex Neundorf <neundorf@kde.org>
If there is a Qt 5.0.3 release, it may or may not contain the patch
that fixes this issue.
http://thread.gmane.org/gmane.comp.lib.qt.releasing/882
Just use the workaround until 5.1.0 which certainly will contain the
fix. Don't use the workaround before Qt 5.0.0.
We can't find both preprocessing expressions at once, because then
the BUILD_INTERFACE will always be favored if both are present, even
if INSTALL_INTERFACE appears first.
This was affecting the behavior of install(EXPORT) because the
INTERFACE_INCLUDE_DIRECTORIES contained entries like
/foo/include;$<INSTALL_INTERFACE:/bar/include>
As the INSTALL_INTERFACE always evaluates to '0', it always needs
to be preprocessed properly.
27e6f6e TI compiler: add automatic detection of prefix and suffixes
b301586 rename TI_DSP toolchain to TI, since it works also for the ARM compiler
12b25df Determine C/CXX/Fortran compiler: fix indentation
7baa55a Determine C/CXX/Fortran compiler: minor restructuring
d90f49b CTest: Fail early without PROJECT_BINARY_DIR (#14005)
2e1c2bd build_command: Fail early without CMAKE_MAKE_PROGRAM (#14005)
4e5cb37 Refactor RunCMake.build_command test to allow more cases
ab079ee Avoid crash when checking property compatibility without link info
92a2ab7 Avoid crash when checking property link dependencies without link info
The commit in qtbase 9dfba89c (Add implementations of QAIM::sibling in
public APIs., 2012-09-26) added a buggy implementation of sibling(), and
the commit f136701b (Use the base implementation of
QAbstractItemModel::sibling in QSIM., 2013-02-21) resolves it.
Workaround the bug for Qt releases that have it.
If CMAKE_MAKE_PROGRAM is not set fail with an error message instead of
crashing. Suggest calling project() or enable_language() first to
ensure that CMAKE_MAKE_PROGRAM is set.
Commit 79568f95 (automoc: Add source file to target early to set the
linker language, 2013-02-20) changed automoc initialization to a two
step process. In the first step, the generated source file was added
to the target, which allows the link language to be determined.
However, this bypassed the check for the availability of Qt itself.
At build-time the automoc file could not be generated because the moc
tool was not available to create it.
The solution is to only add the automoc file to the target if Qt is
found.
Teach the compatibility check added by commit 042ecf04 (Add API to
calculate link-interface-dependent bool properties or error, 2013-01-06)
to return early if no link information is available. This avoids
crashing in a case that should fail with an error message.
Teach the isLinkDependentProperty helper added by commit e9879910 (Make
INTERFACE determined properties readable in generator expressions,
2013-01-19) to return early if no link information is available.
Extend the range of valid target names with the + sign. This character
can commonly be used for target names, such as those containing 'c++'.
Add a test but skip it for Borland and Watcom tools which do not support
the character.
Suggested-By: Benjamin Kloster
When the command is invoked without an explicit build directory path we
compute it from the source directory path. When either the source or
build tree is the root of a Windows drive letter it will have a trailing
slash. Handle slashes consistently when substituting the current output
directory for the current source directory.
While at it, use cmSystemTools::IsSubDirectory instead of FindLastString
to verify that the source directory is a subdirectory.
Inspired-by: Graham Menhennitt <graham@menhennitt.com.au>
* Clarify accepted values of <LANG> suffix in CMAKE_COMPILER_IS_GNU<LANG>.
* Clarify fact that target property GENERATOR_FILE_NAME usually cannot be
used at configure time.
* Clarify that enable_language() can only be used in global scope of
top-level project using language.
* State that enable_language(... OPTIONAL) currently doesn't work.
* Document regular expression operator precedence.
Kitware Robot
Robert Maynard
Brad King
Petr Kmoch
Stephen Kelly
Paul Kunysch
Alex Neundorf
Jean-Christophe Fillion-Robin
Peter Kümmel