After calls to ProcessSourceItemCMP0049, check for an empty return
string to detect a failure instead of trusting GetErrorOccuredFlag.
The latter could have been left from a preceding non-fatal error.
Extend the RunCMake.Configure test to cover a case that exposed this
problem.
Since the Sanitizers write out one log file per process, a single
test might have more than one log file. This commit allows ctest
to read all of the log files found for a particual test.
When running CMake under Leak or Address Sanitizer tools, the fake reporting
would get picked up by the outer CMake and reported as leaks and address
failures on the CMake dashboard. This commit makes sure the test only
reports simulated errors when asked to.
These tests cover the OLD behavior of some policies. Set them to
OLD to avoid warnings in the test output. Leave a comment that
explains why this is done here but not recommended in general.
The generator name is "Xcode", not "XCode". Fix this typo. Explicitly
exclude the SubDirSpaces test on Xcode because it does not work. Also
tell the RunCMake.File_Generate test when Xcode is not multi-config so
it can exlcude the OutputConflict case.
Inspired-by: Daniele E. Domenichelli <daniele.domenichelli@iit.it>
Callers of cmTarget::GetLinkImplementationClosure are interested in the
set of targets whose interface properties propagate to the current
target. This excludes targets guarded by $<LINK_ONLY>.
Teach the CompatibleInterface test to cover suppression of interface
compatibility tests with $<LINK_ONLY>. Although this is not recommended
in practice, it is a way of covering the above behavior.
Previously this generator expression was used internally by the
target_link_libraries command to honor private linking requirements of
static libraries in their INTERFACE_LINK_LIBRARIES. Remove the check
that limits $<LINK_ONLY> to this use case to make it available for
project code to use too.
This adds support for memory and leak sanitizers. This is built into
clang and gcc 4.8 and new compilers. It is activated with a -f switch
during compile.
Fix cmTarget::GetSourceFiles to set EvaluateForBuildsystem on the
$<TARGET_PROPERTY:...,INTERFACE_SOURCES> generator expression so that
the $<TARGET_OBJECTS> generator expression is allowed within an
INTERFACE_SOURCES value.
Extend the InterfaceLibrary test to cover this case. Extend the
RunCMake.TargetObjects test to cover failure of $<TARGET_OBJECTS>
when used through $<TARGET_PROPERTY:...,INTERFACE_SOURCES> in a
non-buildsystem context.
This commit adds support for ThreadSanitizer to ctest. ThreadSanitizer
is part of the clang compiler and also gcc 4.8 and later. You have to
compile the code with special flags. Then your code gets the the
ThreadSanitizer ability built into it. To pass options to the
ThreadSanitizer you use an environment variable. This commit teaches
ctest to parse the output from ThreadSanitizer and send it to CDash.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
Use the AddInterfaceEntries helper to avoid duplication. In
TargetPropertyEntry, replace the TargetName string member with a
reference to the full cmLinkImplItem that produced the entry. This is
possible because the cmLinkImplItem is available in AddInterfaceEntries
(it was not available in GetIncludeDirectories). Having the full
cmLinkImplItem allows processIncludeDirectories to implement CMP0027 OLD
behavior without repeating the target name lookup.
Update the RunCMake.CompatibleInterface test DebugProperties case
expected output for the new order of the messages.
Move the subtests that test with local projects into their own test. The reason
is that on slower or crowded machines the test may reach the limit of 25
minutes and therefore fail while it would pass if it was given enough time.
The split is roughly 3:1 with regard to the execution time, with the new
ExternalProjectLocal test being the faster one.
Print the "timeout correctly killed" message using message(STATUS) so
that 'ctest -S' puts it in the same pipe as the rest of the test command
handler output. This ensures it shows up in the same order every time.
Commit v2.8.11~156^2~2 (Expand includes and defines transitively
in 'external' genexes., 2013-02-13) introduced a recursive loop
and a stack overflow during evaluation of a link implementation
which depends on a transitive property, such as
add_library(empty1 ...)
add_library(empty2 ...)
target_link_libraries(empty1
PRIVATE
$<$<STREQUAL:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>,/foo/bar>:empty2>
)
There is no use-case for code like that currently, but it should not
cause a stack overflow.
Avoid the recursion by reporting an error early if a case like this
is found.
A library or executable target that consists only of a reference to an
object library may have no sources to compile or custom commands to run.
The command in the target is the link (or archive) command. Add missing
order-only dependencies to link commands so that target ordering
dependencies are satisfied for it without depending on an intermediate
compilation rule.
Extend the ObjectLibrary test to cover this case.
Co-Author: Brad King <brad.king@kitware.com>
9998d78d Tests: Speed up RunCMake.include_directories test
6eee5d74 Tests: Drop broken and now unused RunCMake_TEST_FILE option
f0f15b93 Tests: Refactor RunCMake.include_directories to drop RunCMake_TEST_FILE
8707814e Tests: Refactor RunCMake.File_Generate to drop RunCMake_TEST_FILE
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Remove unnecessary language initializations. Change the main
CMakeLists.txt project() call to specify NONE. Use enable_language(CXX)
instead of project() in cases that need it to avoid enabling C too.
We cannot use -DRunCMake_TEST=${RunCMake_TEST_FILE} because test cases
use project(${RunCMake_TEST}) and the project name cannot be a path to a
file. The parent and grandparent commits removed the only uses of the
option. Drop it now.
Drop out-of-place coverage of CheckFunctionExists module. The "printf"
symbol is not available on VS 14 without including the <stdio.h> header
to get a definition.
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
f5c18c9c cmTarget: Drop GetDirectLinkLibraries methods
281eb3d8 cmTarget: Improve HaveBuildTreeRPATH implementation
d912220e cmTarget: Lookup targets in LinkInterface and LinkImplementation
edce4351 cmExportFileGenerator: Make SetImportLinkProperty a template
097be413 cmTarget: Add GetUtilityItems to get target ordering dependencies
4dad5fd2 cmTarget: Add cmLinkItem to refer to a target by name and pointer
a2723442 Fix scope of transitive target name lookups
069d60fe cmTarget: Add method to lookup other targets in a target's scope
47ab3ca6 cmTarget: Constify GetLinkImplementationClosure results
9f3ed029 cmTarget: Constify GetTransitivePropertyTargets results
6f0951af cmTarget: Drop 'head' target from GetImportInfo
0dc9e88d cmTarget: Remove 'head' argument from GetLinkImplementation
4ac72455 cmTarget: Drop 'head' argument from GetLinkClosure
bcdb7ff9 cmTarget: Remove 'head' argument from GetLinkerLanguage
bd9b667b cmComputeLinkInformation: Remove 'head' argument
06328dd5 cmTarget: Remove 'head' argument from GetLinkInformation
...
Since commit v2.8.12~436^2 (VS 10: Escape ; as %3B in preprocessor
definitions, 2013-04-11) the Tests/Preprocessor/CMakeLists.txt file no
longer uses the PP_VS1XX values, so stop setting them.
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Create options "MESSAGE_ALWAYS", "MESSAGE_LAZY", and "MESSAGE_NEVER" to
specify whether to print the "Installing" and "Up-to-date" messages.
Extend the RunCMake.file test with cases covering these options.
Teach cmFileCopier::InstallDirectory to detect whether the destination
directory exists. If so, report it as "Up-to-date" instead of
"Installing". This resolves message asymmetry with file installations.
Extend the RunCMake.file and RunCMake.install tests to check the
installation output on both the first and second run.
Suggested-by: J Decker <d3ck0r@gmail.com>
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
In cmTarget, cmGeneratorTarget, and cmGeneratorExpressionEvaluator, fix
target name lookups to occur in the cmMakefile context of the target
that referenced the name, not the current 'head' target. The context
matters for imported targets because they are directory-scoped instead
of globally unique. We already do this in cmComputeLinkDepends and
cmComputeTargetDepends.
Extend the InterfaceLibrary test with an example covering this behavior.
cb67509b VS: Remove unused parameter of WriteTargetConfigurations
790e1677 VS: Fix subproject .sln dependencies on custom targets
5fba44cf VS: Move VS-only API out of cmGlobalGenerator
Each project listed in a .sln must be marked (or not) as part of the
"default build" for each configuration. For targets created by the
add_custom_target() command we add them to the default build if they
are not excluded in some way or if another target depends on them.
In the top-level .sln, a custom target is excluded if it is not
created with the ALL option to add_custom_target. In subdirectory
.sln files, a target may also be excluded if it is not within the
directory and is brought into the solution only due to a dependency
from another target in the solution.
Fix the "IsPartOfDefaultBuild" and "IsDependedOn" methods to check
every target to be included in the .sln for a dependency on the
custom target. Otherwise transitive dependencies through targets
not in the current subdirectory will not be considered.
Extend the SubProject test with a custom target to cover this case.
Reported-by: William Deurwaarder <William.Deurwaarder@tomtom.com>
Reported-by: Dirk Steenpass <dirk.steenpass@gmail.com>
Add the ability to parse the XML output of the Jacoco tool.
Jacoco (www.eclemma.org/jacoco) is a Java coverage tool.
Add and integrate a class for the parser and
include a test which utilizes the new parser.
ddec418a Features: Add compiler version support to WriteCompilerDetectionHeader.
b7029576 Project: Add configurable name for version computation macros.
78acaafe Project: Separate simulated compiler id from version detection.
567af1a5 WCDH: Issue a better message for version compatibility.
86be733f cmGeneratorExpression: Add workaround for Borland compiler
3495ab0a tests: update unused variable test expected output
2a1b2d84 backtrace: Convert to local paths in IssueMessage
a0829205 genex: remove the need for backtraces
efc20569 cmake: remove dummy backtraces for IssueMessage
d46c650d cmMakefile: return a backtrace
Xcode 1.5 does not support multiple configurations. The generator also
adds some sources internally that cause extra OriginDebug output.
Update the expected output to tolerate it.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
Add support for Cobertura coverage files written by Java.
Add a test which uses the report from a Java run of Cobertura to calculate coverage.
In the documentation of CTEST_COVERAGE_COMMAND, give a sample .sh file to merge
the Cobertura .ser files and generate the XML report from the merged file.
If we fail to create the generator named by CMAKE_GENERATOR, exit
with an error message instead of crashing. While at it, fix the
wording of the error message when CMAKE_GENERATOR is not set.
Extend the RunCMake.CommandLine test with cases covering the
"cmake --build" option when the named directory does not provide
a CMakeCache.txt with a valid CMAKE_GENERATOR.
While tracing dependencies of a target, cmTargetTraceDependencies
follows sources by full path to determine if the source is to be
produced by a custom command. Commit 4959f341 (cmSourceFileLocation:
Collapse full path for directory comparisons., 2014-03-27) changed
the storage of target sources to be in the form of a normalized
path instead of an unnormalized path.
The path is followed by looking it up in a mapping via
cmMakefile::GetSourceFileWithOutput to acquire an appropriate
cmSourceFile. The mapping is populated with the OUTPUT components
of add_custom_command invocations, however it is populated with
unnormalized paths. This means that the tracing logic does not
find appropriate cmSourceFiles, and does not generate appropriate
build rules for the generated sources.
Normalize the paths in the OUTPUT components of add_custom_command
to resolve this.
The paths in the DEPENDS component of add_custom_command are also
not normalized, leading to the same problem again. Normalize the
depends paths after generator evaluation and expansion.
Teach set_property and get_property an "INSTALL" property type to be
associated with install-tree file paths. Make the properties available
to CPack for use during packaging. Add a "prop_inst" Sphinx domain
object type for documentation of such properties.
Write to the timeout test log file before sleeping and flush to be sure
it is created. Move the check that the after-sleep line is not written
out to the ctest script. Rename the CheckChild test to TestSleep since
it no longer checks. Do not try to read the log file if it does not
exist.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
Brad King
Nils Gladitz
Bill Hoffman
Clinton Stimpson
Rolf Eike Beer
Stephen Kelly
Ben Boeckel
Joseph Snyder