Refactor the -Wdev and -Wno-dev options parser to use a generic -W
parser that follows the GCC pattern, excluding support for
-Werror=TYPE and -Wno-error=TYPE formats for now.
Explicitly enable author warnings by default, via the
cmake::GetSuppressDevWarnings method, which signals suppression
is turned off unless the CMake variables are set as required.
Add test cases for author and deprecated messages displayed by
default.
Make the message suppression more consistent, by adding a check
for the message related CMake variables in cmake::IssueMessage,
which allows callers of IssueMessage other than the message
command to behave as expected. Also added a check for
CMAKE_SUPPRESS_DEVELOPER_WARNINGS in the message command to
mirror the deprecated message type behaviour.
Added a 'force' flag to the cmake::IssueMessage method, to
make the message suppression consistent, when setting the
message related CMake variables directly in a CMake file.
Expand message command tests to cover the AUTHOR_WARNING message
type as well.
Change the Cobertura handler to look for an environment variable
called "COBERTURADIR" which contains the directory where the
coverage.xml file is found. If that variable doesn't exist,
continue to use the default of the binary directory.
Update the test to use an appropriate value in the environment
variables.
This fixes a bug where 64 bit builds with /bigobj incorrectly determined
that the object files were not 64 bit. This manifested itself with
printf type functions showing up as undefined because the leading
underscore was being removed and should not be removed.
If a custom command has a SYMBOLIC output (that is never actually
created) then do not mark the custom command build statement as
'restat'. Otherwise other custom commands that depend on the symbolic
output may not always re-run because after running the first custom
command Ninja 'restat' will detect that the output timestamp did not
change and skip its dependents.
This was observed with the ExternalProject BUILD_ALWAYS option where
Ninja would not re-run the 'install' step each time 'build' re-runs.
Refactoring in commit v3.4.0-rc1~74^2~1 (MSVC: Rewrite manifest file
handling with Makefile and Ninja, 2015-09-15) broke handling of this
option. Fix it and add a test case.
Commit c389f8bb (cmLocalGenerator: Port Find method away from
GetGeneratorTarget, 2015-10-25) ported the implementation of
FindGeneratorTargetToUse away from the FindTargetToUse method,
but neglected to handle alias targets.
The latter method has a parameter to determine whether to
include alias targets in the search, but as that is only
needed at configure time, this generate-time equivalent does
not need the condition.
Changes in commit v3.4.0-rc1~124^2~1 (cmFindProgramCommand: Re-implement
search using more flexible approach, 2015-09-01) did not preserve the
behavior of looking for the given name with no search path at all.
Fix this and add a test case covering finding an absolute path with
no search directories.
In some cases, CMake returned the following error:
-- Checking for module 'foo'
-- Package 'foo' not found
When the actual error returned by pkg-config was:
Package 'bar', required by 'foo', not found
Now, the actual error is forwarded to the user.
-- Checking for module 'foo'
-- Package 'bar', required by 'foo', not found
For the standard case (i.e. the package was indeed not found), the
CMake error was:
-- Checking for module 'foo'
-- Package 'foo' not found
But it now prints:
-- Checking for module 'foo'
-- No package 'foo' found
The associated test was also updated. ${last} refers to the last
CLI argument.
Refactoring in commit v3.4.0-rc1~390^2~1 (cmCTestMultiProcessHandler:
Refactor RUN_SERIAL implementation, 2015-06-01) forgot to update a code
path for cleaning up after a failed RUN_SERIAL test. This causes an
infinite loop after a RUN_SERIAL test fails. Fix it and add a test.
a4bbdc5e cmLocalGenerator: Remove cmGeneratorTargetsType from setter API.
04b6bb16 cmLocalGenerator: Simplify semantic of adding generator targets.
400e3d19 cmLocalGenerator: Don't store imported generator targets
726e461b CMP0063: Split unit test by target type.
Commit v3.4.0-rc1~494^2~4 (cmMakefile: Add API for elseif to create
backtrace., 2015-05-29) removed the use of cmMakefileCall to push/pop
execution context in favor of a new way to create backtraces.
However, a call to cmMakefile::GetExecutionContext is still invoked to
issue a contextual CMP0054 warning through cmConditionEvaluator. As
the elseif is not part of the call stack, this resulted in trying to
access an empty vector.
Avoid the attempt at getting execution context when evaluating elseif by
constructing a context and backtrace on behalf of the cmConditionEvaluator
in all cases.
The HTML file for the Delphi Code coverage was being found by the
Dashboard coverage run of CMake itself. Switch it to be a configured
file to eliminate this extra reading.
Add new API for the subdirs command to cmState.
This fixes a regression introduced in commit f716460e (cmMakefile: Move
invokation to initialize snapshot., 2015-10-06).
Revert commit v3.4.0-rc1~10^2~2 (Features: Disable support for Oracle
SolarisStudio on non-Linux, 2015-09-29) and two follow-up commits.
The support of compile features and language standards on Orcale
SolarisStudio needs more investigation so for CMake 3.4 we should
just act as 3.3 did.
2402bb8c Help: Document Windows 10 Universal Applications in cmake-toolchains(7)
1be2f12c VS: Add support for Windows 10 Universal (Store) Applications
2798dbda VS: Refactor indentation of LinkLibraryDependencies
8c426183 MSVC: Add system libs for WindowsStore on VS 2015
d1b87d72 VS: Select Windows 10 Store SDK and toolset for VS 2015
Teach the VS 2015 generator to support WindowsStore 10.0 applications.
Add target properties to customize them:
* VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION: Specifies the minimum version
of the OS that the project can target.
* VS_DESKTOP_EXTENSIONS_VERSION, VS_MOBILE_EXTENSIONS_VERSIONS,
VS_IOT_EXTENSIONS_VERSION: Add a reference to the version of the SDK
specified to the target allowing to target the extended functionality in
a universal project.
* VS_IOT_STARTUP_TASK: Specifies that the target should be
built as an IOT continuous background task.
5fdf7594 Tests: Suppress WriteCompilerDetectionHeader failure on SunPro
c824b23d Features: Fix C++98 flags on Oracle SolarisStudio 12.4 on Linux
61bc0f73 Features: Disable support for Oracle SolarisStudio on non-Linux
On an Oracle 12.4 build the c_using_fortran executable cannot find the
"fsu" library at runtime. Since this is an implementation detail of the
"hello" library, link that library to it privately so that "-lfsu" does
not propagate to the executables consuming it.
Rather than using the CXXFLAGS environment variable in the make-only
build, copy the CMAKE_CXX_FLAGS used to build the files on the CMake
side. This will account for any changes made by CompileFlags.cmake
or cache-provided flags.
Use the run_cmake() function to generate the test build tree with
the proper CMake generator and also to verify that it succeeds.
Drop our PreTestError helper as it is no longer needed.
The DEPENDENCIES test case uses install(TARGETS) and so generates a warning:
CMake Warning in CMakeLists.txt:
WARNING: Target "test_prog" has runtime paths which cannot be changed
during install. To change runtime paths, OS X version 10.6 or newer is
required. Therefore, runtime paths will not be changed when installing.
CMAKE_BUILD_WITH_INSTALL_RPATH may be used to work around this limitation.
Set CMAKE_BUILD_WITH_INSTALL_RPATH to avoid the warning since we do not
need to run the binaries from the build tree anyway.
We do support SunPro 5.13 compiler features, but only on Linux.
Suppress the portion of the test that fails on Solaris until
the larger problem can be addressed.
9298f56d CPack: allow packaging of empty directories
ecd71c9c SystemTools: time operations on directories
19c6f4ee SystemTools: set time file permissions
749a140a CPackDeb: allow empty directories in component packages
The Ninja generator and Visual Studio generators are special-cased for the
QtAutogen feature. In order to reduce the number of custom targets, the Visual
Studio generators prefer to create custom commands instead, and in order to
create appropriate Ninja files, generated rcc files are listed as byproducts.
This requires the use of the GetConfigCommonSourceFiles API of the
cmGeneratorTarget for those generators when initializing the autogen target.
The initializer method is called from Compute() after the cmGeneratorTarget
objects are created, however the initialization of the object directory occurs
later in the InitGeneratorTargets method. That means that the resulting object
locations are computed incorrectly and cached before the object directory is
determined, so the generated buildsystem can not find the object files.
The initialization of the object directory was split from the creation of
cmGeneratorTarget instances in commit 0e0258c8 (cmGlobalGenerator: Split
creation of generator object from initialization., 2015-07-25). The motivation
for the split was to do only what is essential to do early in cases where
cmGeneratorTargets need to be created at configure-time. That is required for
the purpose of implementing policies CMP0024 and CMP0026, and for
try_compile(LINK_LIBRARIES). However, the split was not really necessary.
Compute the object directory in the cmGeneratorTarget constructor instead.
The QtAutogen unit test already tests the use of TARGET_OBJECTS with AUTOMOC,
and that test already passes on Ninja. The reason it already passes is that
the QtAutogen target also uses the AUTORCC feature, and specifies several qrc
files in its SOURCES. Later in the Compute algorithm (after the
InitGeneratorTargets call), the rcc files are determined and target->AddSource
is called. The AddSource call clears the previously mentioned cache of source
files, causing it to be regenerated when next queried, this time taking account
of the object directory.
Extend the test suite with a new target which does not make use of AUTORCC with
qrc files so that the test added alone would break without the fix in this
commit.
Some commands on Windows do not understand forward slash paths and
require backslashes. In order to help projects generate shell
invocations of such commands, provide a generator expression to convert
paths to the shell-preferred path format for the current generator.
This will allow custom commands to generate paths the same way CMake
does for compiler command invocations.
The latter is now the preferred URL for visiting cmake.org with a
browser. Convert using the shell code:
git ls-files -z | xargs -0 sed -i 's|http://www\.cmake|https://cmake|g'
In the Ninja generator we run all build rules from the top of the build
tree rather than changing into each subdirectory. Therefore we convert
all paths relative to the HOME_OUTPUT directory. However, the Convert
method on cmLocalGenerator restricts relative path conversions to avoid
leaving the build tree with a "../" sequence. Therefore conversions
performed for "subdirectories" that are outside the top of the build
tree always use full paths while conversions performed for
subdirectories that are inside the top of the build tree may use
relative paths to refer to the same files.
Since Ninja always runs rules from the top of the build tree we should
convert them using only the top-level cmLocalGenerator in order to
remain consistent. Also extend the test suite with a case that fails
without this fix.
The changes in commit 47b060ae (CPackDeb: allow empty directories in
component packages, 2015-09-21), commit b58de9fe (CPack: allow packaging
of empty directories, 2015-09-21), and commit b761e90d (CPack: remove
accidental changes, 2015-09-22) regressed packaging of CMake itself.
Revert the changes until they can be revised and rebased on other
changes that make additional fixes.
fff9434d FindThreads: officially announce it works with only C++ enabled
66db914a FindThreads: fix printing a pointer value in test code
0b38424c FindThreads: make the call to try_run() work also if only C++ is enabled
9924a212 FindThreads: replace CheckIncludeFiles by CheckIncludeFile
a27bc0cc Check(Function|Library|Symbol)Exists: make it work if only C++ is enabled
7279f293 FindThreads: add simple testcase
The changes in commit c96fe0b4 (cmake: Add -W options to control
deprecation warnings and errors, 2015-07-28) fail to account for
-Wdev warnings produced by places in CMake other than message().
This causes a regression in which -Wno-dev fails to suppress such
warnings. Revert the feature until it can be revised accordingly.
2514e426 CMP0026: Use compatibility codepath until configure is finished (#15748)
b98f7712 cmGlobalGenerator: Add API for the configure step being finished.
b5de2bd9 cmLocalGenerator: Simplify condition.
If variable is set to TRUE, values of all variables prefixed with CPACK_
will be escaped so special characters such as dolar sign, quotes or
foreward slash will not be lost. By default variable is treated as set
to FALSE for back compatibility.
The cpack_encode_variables macro is changed into a function to remove
scope pollution. There should be no other effects.
Use it instead of the similar cmMakefile API. It is necessary to
know that the Configure step is completely done, not just that one
particular cmMakefile is finished configuring.
Prior to commit 611220f7 (cmTarget: Use reliable test for CMP0024 and CMP0026
OLD., 2015-07-25), this was determined by checking whether cmGeneratorTargets
exist yet, which happens after the Configure step.
Add ctest command-line options:
--test-output-size-passed <n>
--test-output-size-failed <n>
to set the amount of test output to store in Test.xml as a command-line
dashboard client.
Add documentation and tests for the existing
CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE
CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE
CTest variables.
e134e53b Add support for *.manifest source files with MSVC tools
da00be63 MSVC: Rewrite manifest file handling with Makefile and Ninja
d488b5c9 Ninja: Always add OBJECT_DIR variable to link rules
6d620f5a VS: Add manifest tool settings to VS 8 and 9 project files
f38625be Tests: Teach RunCMake to tolerate 'Bullseye Testing' lines in test output
1a75a966 Tests: Teach RunCMake to tolerate 'Time Machine' lines in test output
becb14c9 CPack/DEB: test preserve extra config file permissions
7044e8ee CPackDeb: use of libarchive and removal of fakeroot
415405a3 cmArchiveWrite: control user/group, permissions and recursive file adding
4f2ff601 Tests: Make RunCMake.CPack error messages more readable
81b748ae cmGeneratedFileStream: Fix spelling in comment
Classify .manifest sources separately, add dependencies on them, and
pass them to the MS manifest tool to merge with linker-generated
manifest files.
Inspired-by: Gilles Khouzam <gillesk@microsoft.com>
When testing under Bullseye coverage, some tests get lines on stderr of
the form:
... Bullseye Testing Technology ...
Remove such lines from output before matching because they are not
representative of the actual test output.
On some OS X machines some tests get lines on stderr of the form:
... attempting to exclude an item from Time Machine by path ...
produced by the system. Remove such lines from output before matching
because they are not representative of the actual test output.
7a6e5f06 Tests: Cover find_program when the environment duplicate some HINTS
40122975 Merge branch 'fix-bad-search-ordering' into test-search-ordering
02440154 find_*: Fix search order when the environment duplicates some HINTS
When compiling with
LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld'
the compiler output includes a line like
COLLECT_GCC_OPTIONS='-specs=/usr/lib/rpm/redhat/redhat-hardened-ld' ...
that our link line regex matches due to an argument ending in "-ld".
Since it is not really the link line no implicit link information is
dectected. Exclude "VAR=..." lines from consideration as link lines to
fix this.
Extend the RunCMake.set_property test with cases covering buildsystem
directory properties:
* COMPILE_DEFINITIONS
* COMPILE_OPTIONS
* INCLUDE_DIRECTORIES
Also test a non-buildsystem property to document the equivalence
in behavior.
This is a change in behavior from CMake 3.3, but there is no semantic meaning
to empty entries in buildsystem properties. This also restores behavior to
that of CMake 2.8.10.
Mangling is prevented by using a function instead of a macro for setting
default value of some CPack variables. Function is meant for internal use
in CPack.cmake only.
Old macro is deprecated but kept for backwards compatibility - was
intended for internal use only as it can't be used for CPack after
CPack.cmake script is included.
Patch removes local workarounds that were required by old macro,
fixes default setting of variables that by default inherit value from
another variable that already went through old default setting macro
(e.g. value of CPACK_PACKAGE_INSTALL_REGISTRY_KEY caused error for
wrong escapes if CPACK_PACKAGE_INSTALL_DIRECTORY contained escaped
back slashes) and provides a test for correct escaping of characters.
9cdf6ef4 Swift: Add proper Swift compiler test
1aa29f0d Swift: Remove positive Swift language tests
d778a1c2 Swift: Require Xcode 6.1 and for MacOS X at least SDK 10.10
4da60024 Swift: Fix Compiler-Id detection for Swift 2
874a265c Swift: Make SwiftMix compatible with Swift 2
b9856862 Tests: Cover set_property for buildsystem target properties
407ff47e cmTarget: Fix memory leak when SOURCES property is cleared
cf74fc24 cmTarget: Fix buildsystem property empty value set and append operations
8ea7611b find_program: Optionally consider all names in each directory
fc1990c9 cmFindProgramCommand: Re-implement search using more flexible approach
fdbfc9f6 Tests: Add explicit testing for find_program
907a919b cmSystemTools: Drop unused StringEndsWith method
ed4de3c9 cmFindProgramCommand: Use Names member instead of passing it
bf32b95e cmFindLibraryCommand: Avoid repeating search for the same name
It's relatively complex to determine in advance if a Xcode, SDK,
and Deployment Target configuration is capable of running Swift.
For example the following combinations do not work:
* deployment target < OS X 10.9
* Xcode 6.2 and macosx10.9 SDK
* Xcode 7 Beta 6 and macosx10.10 SDK
Until we found out how to query Xcode for Swift support in a reliable
way, the RunCMake.Swift test cases will be restricted to negative ones.
The Watcom compiler does not have stream operators for std::string.
Since KWSys no longer provides the operators for us, just use c_str()
to avoid the problem and allow the test to compile on Watcom.
Extend the RunCMake.set_property test with cases covering buildsystem
target properties:
* COMPILE_DEFINITIONS
* COMPILE_FEATURES
* COMPILE_OPTIONS
* INCLUDE_DIRECTORIES
* LINK_LIBRARIES
* SOURCES
Also test a non-buildsystem property to document the current difference
in behavior. Refactor the existing LINK_LIBRARIES case to the same
more-extensive test as the rest. Use the output generated by CMake 3.3
as the expected output for each test case.
The test case added to RunCMake.set_property by commit 675ef165 (Allow
LINK_SEARCH_{START,END}_STATIC props to have default values, 2015-08-07)
is not a test of the set_property command and so belongs in its own test
case. Create a new RunCMake.LinkStatic test to cover cases related to
static linking.
While at it, simplify the LINK_SEARCH_STATIC test case to enable only C.
When more than one value is given to the NAMES option this command by
default will consider one name at a time and search every directory for
it. Add a NAMES_PER_DIR option to tell this command to consider one
directory at a time and search for all names in it.
Previously this command was tested only implicitly as part of larger
tests. Add a RunCMake.find_program test to cover find_program cases
specifically and independently.
Michael Scott
Brad King
Roger Leigh
Joseph Snyder
Bill Hoffman
Gregor Jasny
Stephen Kelly
Raffi Enficiaud
Benjamin Chrétien
Tamas Kenez
Gilles Khouzam
Domen Vrankar
Stefan Kislinskiy
Rolf Eike Beer
Marc Chevrier
Robert Goulet
Chuck Atkins
Ben Boeckel
Ben Boeckel
Roman Donchenko
Roman Wüger