Commit Graph

1274 Commits

Author SHA1 Message Date
David Cole a61c5ab6e5 Add CMAKE_TESTS_CDASH_SERVER variable and CTestSubmitLargeOutput test.
If defined and non-empty, the value of CMAKE_TESTS_CDASH_SERVER should point
to a CDash server willing to accept submissions for a project named
PublicDashboard. On machines that also run a CDash dashboard, set this
variable to "http://localhost/CDash-trunk-Testing" so that the CMake tests
that submit dashboards do not have to send those submissions over the wire.

The CTestSubmitLargeOutput test runs a dashboard that has a test that produces
very large amount of output on stdout/stderr. Since we do not even want	 to
attempt to send such large output over the wire, this test is off by default
unless the CMAKE_TESTS_CDASH_SERVER server is localhost. This test is expected
to cause a submission failure when sent to CDash. It passes if the submit
results contain error output. It fails if the submit succeeds.

CMAKE_TESTS_CDASH_SERVER: CDash server used by CMake/Tests.

If not defined or "", this variable defaults to the server at
http://www.cdash.org/CDash.

If set explicitly to "NOTFOUND", curl tests and ctest tests that use the
network are skipped.

If set to something starting with "http://localhost/", the CDash is expected
to be an instance of CDash used for CDash testing, pointing to a
cdash4simpletest database. In these cases, the CDash dashboards should be
run first.
2010-03-08 13:25:58 -05:00
Zach Mullen 9d7e08de48 Remove empty_binary_dir command in new unit test 2010-03-03 10:49:21 -05:00
Zach Mullen 2fd9b8072b Add unit test for RESOURCE_LOCK test property 2010-03-03 10:33:09 -05:00
Bill Hoffman ab650f095f Different versions of cygwin report differet messages for cygwin
For cygwin pass the badexe test if either ***Failed or BAD_COMMAND
show up in the output of the test.
2010-02-26 13:45:23 -05:00
Bill Hoffman 0a1ecf197b Change the tag to be master from CVS for release scripts 2010-02-25 14:46:10 -05:00
David Cole b39fe9407e Fix problem with ExternalProject test in in-source builds. 2010-02-17 16:21:41 -05:00
Zach Mullen 1c13f57313 Add a high COST value to BootstrapTest so that it will be scheduled first in parallel ctest executions. 2010-02-11 11:58:04 -05:00
Brad King 2de33ebd58 Make CTest.UpdateCVS robust to some cvs clients
Commit "Teach CTest.Update tests to strongly check entries" (2010-02-09)
started checking Update.xml entries strongly.  This revealed that some
cvs clients report "U CTestConfig.cmake" during update even though the
file did not change and it selects the same revision.  As a result the
test fails with

  Update.xml has extra unexpected entries:

    Updated{CTestConfig.cmake}

We fix the test to tolerate this particular extra entry without failing.
2010-02-10 11:48:09 -05:00
David Cole 10750bff1c Fix configure time error that occurs when there is a backslash in the HOME environment variable. 2010-02-10 11:23:07 -05:00
Brad King 6e7e71e9b9 Teach CTest.UpdateGIT test to fake file timestamp
We wrap the git executable in a shell script that touches one source
file after 'git pull'.  This makes the file newer than the index even
though it has not actually changed.  If CTest does not refresh the index
properly then the test will fail with a bogus modified file.
2010-02-09 13:31:40 -05:00
Brad King 78a5727d49 Teach CTest.Update tests to strongly check entries
Previously these tests just checked for matching file names in the
Update.xml files.  Now we check the update types (Updated, Modified, or
Conflicting) and reject unexpected extra entries.
2010-02-09 13:31:20 -05:00
Zach Mullen c87282ce52 Re-enabled Scheduler test and fixed the underlying problem. 2010-02-03 16:32:26 -05:00
Zach Mullen 4864d48f27 Disable Scheduler test until underlying problem is resolved. 2010-02-03 16:17:02 -05:00
Zach Mullen fe7c4d0c2a Add unit test to ensure that CTestCostData scheduling works correctly 2010-02-03 15:06:29 -05:00
Brad King 3c2ecbe74e Add alternate per-vendor compiler id detection
At least one Fortran compiler does not provide a preprocessor symbol to
identify itself.  Instead we try running unknown compilers with version
query flags known for each vendor and look for known output.  Future
commits will add vendor-specific flags/output table entries.
2010-02-01 09:03:05 -05:00
Brad King 2b3eee4646 Avoid PathScale cmd-line bug in TryCompile test
The PathScale compiler silently accepts unknown options that start in
more than one '-':

  $ touch foo.c
  $ pathcc -c foo.c --junk
  $ echo $?
  0
  $ pathcc -c foo.c ---junk
  $ echo $?
  0
  $ pathcc -c foo.c -junk
  pathcc ERROR parsing -junk: unknown flag
  $ echo $?
  2

We teach the TryCompile to pass a bogus flag with only one '-' instead
of three '-'s for this compiler.
2010-01-25 08:47:32 -05:00
Brad King 4d1351e8d3 Skip Fortran module mangling test on PathScale
We disable this test because PathScale Fortran mangles module symbols as
"MYSUB.in.MYMODULE" so we cannot interface with it from C.  We already
did this for SunPro and MIPSpro.
2010-01-25 08:27:34 -05:00
Brad King cbfbb86b58 Fix escapes in Fortran depend.make entries
Makefile dependencies must be escaped using cmLocalGenerator::Convert
with the cmLocalGenerator::MAKEFILE option.  This fixes Fortran module
dependencies with spaces in the path.  We test the fix by adding a space
to one of the module paths in the Fortran test.
2010-01-04 10:18:44 -05:00
David Cole aad15c3abf Fix issue #10060 - add APPEND arg to ctest_start command.
If APPEND is given to ctest_start, it will read the tag from the current existing Testing/TAG file rather than creating a new one based on the current time stamp. This allows a developer to run several dashboard scripts in a row, all of which will share the same tag/stamp/buildid when they finally get submitted to CDash. Now you can split the running of build phases and test phases for the same dashboard row into multiple scripts.
2009-12-29 14:38:31 -05:00
Brad King 5cf77136cb Longer CTestTestTimeout default time on Cygwin
The commit "Make CTestTestTimeout time configurable" added a CMake cache
variable CTestTestTimeout_TIME to configure the length of the timeout
used by the inner CTestTestTimeout test.  The reason was to allow users
on slow machines to give this test some extra time without extending the
timeout for everyone.  However, Cygwin CMake seems to load slowly enough
that it is worth a longer default timeout for that platform.
2009-12-21 10:00:51 -05:00
Brad King 918355632c Test for SVNPath element in Update.xml
The commit "Submit Subversion directory path in Update.xml" added the
element <SVNPath>...</SVNPath> to Update.xml for Subversion work trees.
This commit teaches the CTest.UpdateSVN test to verify the presence of
the element.
2009-12-18 11:01:24 -05:00
Bill Hoffman bdcce34435 Fix BadExe test on cygwin. 2009-12-18 09:24:49 -05:00
Brad King a73833d037 Submit global tree revision in Update.xml
We teach CTest to report in a <Revision> element the revision of the
source tree that was tested.  This makes sense for all modern VCS tools
because they version the whole tree.  We simply omit this element for
CVS because it only versions files.  See issue #7541.
2009-12-18 08:13:51 -05:00
Brad King 11e6b513c2 Test the CheckTypeSize module
We create test "Module.CheckTypeSize" to verify that type sizes get
detected correctly.
2009-12-17 15:15:34 -05:00
Brad King 6c9f678098 Teach ADD_TEST_MACRO about test namespaces
We teach ADD_TEST_MACRO to transform names of the form "Namespace.Name"
to the directory "Namespace/Name" and the project name "Name".  This
will allow new tests to be better organized.
2009-12-17 15:14:14 -05:00
Zach Mullen 5c2a5e06fd Workaround for CTestTestBadExe on Cygwin 2009-12-17 12:51:40 -05:00
David Cole 5eb8e80b2a Add a test to build the CSE project if the optional cache entry CMAKE_TEST_PROJECT_CSE_DIR is set. 2009-12-15 16:52:27 -05:00
Brad King 1ac1058272 Honor real language flags in FortranC.Flags test
The test overrides the CMAKE_C_FLAGS and CMAKE_Fortran_FLAGS to test
passing a specific flag to the compiler wrapper scripts.  We fix it to
honor any outside flags needed for the real compiler.
2009-12-15 14:03:03 -05:00
Brad King 0306080e6e FortranCInterface: Support '=' in language flags
The commit "FortranCInterface: Honor language flags in checks" taught
the FortranCInterface module to pass C and Fortran flags into its
detection and verification checks.  We improve on the change to allow
the '=' character in the language flags.  This requires passing the
cache entry type with the -D options.
2009-12-15 14:02:52 -05:00
David Cole c31b7fcad0 Add one more possible error message from curl for the failed submit tests. 2009-12-14 22:43:40 -05:00
Brad King 555fcbd2e2 Test FortranCInterface flag propagation
We create test FortranC.Flags to try passing per-language flags from a
project into its FortranCInterface detect/verify checks.  We wrap the
compilers with scripts that enforce presence of expected flags.
2009-12-14 12:36:25 -05:00
Brad King 55275e017d New decision method to enable Fortran tests
CMake does not enable Fortran for its own build, but it needs to find a
Fortran compiler to know if it is possible to enable Fortran tests.
Previously we searched for a hard-coded list of Fortran compilers which
was duplicated from the CMakeDetermineFortranCompiler.cmake module.  We
now run CMake on a small test project that enables the Fortran language
and reports the compiler it found.  This represents a more realistic
check of whether the Fortran tests will be able to find a compiler.
2009-12-10 12:16:38 -05:00
Brad King faf6d82bd6 Always use a configuration for CMake tests
Previously our EnforceConfig script that loads at test-time would only
enforce a non-empty CTEST_CONFIGURATION_TYPE for CMake 2.6.2 and lower.
Now we simply always enforce use of a configuration, and select one of
the configurations that was built if none is given.

This is necessary to run tests like CMake.Install that need to know the
configuration with which CMake was built.
2009-12-10 11:19:23 -05:00
Brad King 6c79c96265 Test 'install' target of CMake itself
We create option CMake_TEST_INSTALL to enable a new CMake.Install test.
It tests running the "make install" target to install CMake itself into
a test directory.  We enable the option by default for dashboard builds.
2009-12-10 10:34:36 -05:00
Brad King 9d823f7847 Apply CMake test-time config to all tests
We configure an EnforceConfig.cmake script to load at CTest time.
Previously we loaded it from Tests/CTestTestfile.cmake, but now we load
it from the top level so it applies to all tests.
2009-12-10 10:33:42 -05:00
Brad King 9478ad0945 Create CMakeLibTests output dir for Xcode
Xcode 2.x forgets to create the target output directory before linking
the individual architecture pieces of a universal binary for the target
CMakeLibTests.  Then it passes the directory to -L and -F options when
linking the and warns that the directory does not exist.  We work around
the problem by using a pre-build rule on the target to create the output
directory.
2009-12-09 10:56:30 -05:00
Brad King f5ac85a29e Test XML encoding with UTF-8 character validation
This creates a unit test for cmXMLSafe.  See issue #10003.
2009-12-08 15:44:45 -05:00
Brad King 0a64936f49 Test UTF-8 decoding
This creates a unit test for cm_utf8.  See issue #10003.
2009-12-08 15:44:22 -05:00
Brad King 5872cc7c1f Create CMakeLib test driver and test cmXMLParser
We create a new CMakeLibTests driver executable in which to writes unit
tests for CMakeLib.  Our first test is a smoke-test of cmXMLParser.
2009-12-08 11:44:50 -05:00
Brad King d4ada9d0d5 Clean up CMake build tree 'bin' directory
We re-arrange EXECUTABLE_OUTPUT_PATH settings to avoid putting utility
and test executables in the 'bin' directory of the build tree.  This
makes the directory look like that in the installation tree, except that
on multi-configuration generators we still use a per-config
subdirectory.
2009-12-08 11:44:28 -05:00
Brad King 1d91bc64aa Remove unused DumpDocumentation code
The DumpDocumentation executable and some supporting code and tests were
completely unused by CMake.  Generation of documentation is done by the
individual executables with --help* options.  In this commit we simply
remove the unused code, executable, and test.
2009-12-08 09:38:36 -05:00
David Cole 1e04804e84 Force CheckSourceTree test to pass if the source tree is not a CVS checkout. The test can only do its checking if cvs is available and the source tree is a cvs checkout. Also, allow for the possibility that backslash characters exist in the HOME environment variable, because they may when built in a cygwin environment on Windows. 2009-12-07 11:54:23 -05:00
Zach Mullen 25d7399272 Remove WILL_FAIL property from BadExe test, since CTest was returning 0. Replaced with a pass regex. 2009-12-07 10:15:34 -05:00
Zach Mullen a8ab3005ae Cosmetic changes to previous commit, for consistency. 2009-12-07 09:37:32 -05:00
Zach Mullen f30c82f370 Added a unit test for running a test command which exists but is not an executable, because it previously caused the outer ctest process to fail. 2009-12-07 09:34:05 -05:00
David Cole 8d28ce8029 Fix cvs password problems during the CMake.CheckSourceTree test. Make sure cvs has access to the original value of the HOME environment variable and not the 'CMake testing' value of it so that any cvs passwords set up on the machine work to get the list of local modifications using 'cvs up'... 2009-12-04 14:50:37 -05:00
David Cole 0b38bb4c53 Fix issue #2336 - honor the -C arg to ctest. Honor it for all stages of running -D dashboards from the command line and running ctest_configure, ctest_build and ctest_test commands in -S scripts. Also, allow a script to change it by setting the CTEST_CONFIGURATION_TYPE variable: allows for multiple configuration build/test cycles within one script. Add a new signature for the cmake command build_command that accepts CONFIGURATION as one argument. The original build_command signature is still there, but now marked as deprecated in the documentation. Of course... also add CTestConfig tests to verify that -C is honored for -D dashboards and -S scripts. 2009-12-04 12:09:01 -05:00
Brad King 9daa4a6c3f Remove CMAKE_SHARED_MODULE_RUNTIME_${lang}_FLAG
This platform configuration variable is unused.  Modules are built using
the value of CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG.
2009-12-02 15:17:32 -05:00
Zach Mullen f3cd66577f Remove unnecessary configure time operations from CTestTest* tests 2009-12-02 09:42:06 -05:00
Brad King b14734b9b6 Make CTestTestTimeout time configurable
In this test we start up a cmake script that runs a process that sleeps,
and the timeout for the script is shorter than the sleep time.  However,
in order to properly detect that the sleeping grandchild is killed when
the script times out we need to give sufficient time for the script to
start the grandchild.  Otherwise the log file for the grandchild is not
available.

On some (cygwin) builds our previous 1 second timeout for the script was
not long enough to let the interpreter load and start the grandchild.
We make the timeout time configurable by setting CTestTestTimeout_TIME
in the cache for CMake itself.  It tells the test how long to let the
script run.  The grandchild always sleeps for 4 seconds longer to ensure
a comfortable window during which the process tree can be killed.
2009-12-02 09:31:49 -05:00