Commit Graph

47 Commits

Author SHA1 Message Date
Brad King d7938bff37 VS: Select WindowsPhone and WindowsStore default toolsets
Teach the VS >= 10 generators to recognize these system names and select
the appropriate default toolset for the system version.  Report an error
when the version is not known to be supported by VS.

Inspired-by: Gilles Khouzam <gillesk@microsoft.com>
2014-07-31 14:08:46 -04:00
Brad King 3abd150ce9 VS: Save WindowsPhone and WindowsStore system internally
Add boolean members to the VS >= 10 global generator to save
whether CMAKE_SYSTEM_NAME is WindowsPhone or WindowsStore
without having to repeat a string comparison.

Inspired-by: Gilles Khouzam <gillesk@microsoft.com>
2014-07-31 14:08:43 -04:00
Brad King 0a5fe2793a VS: Add internal API to get system name and version
Add cmGlobalVisualStudio10Generator::GetSystemName and GetSystemVersion
methods to access the corresponding members publicly.
2014-07-31 10:47:22 -04:00
Brad King e58f97531a VS: Add a hook to adapt to SystemName and SystemVersion
Add a virtual cmGlobalVisualStudio10Generator::InitializeSystem method
called from SetSystemName once the SystemName and SystemVersion members
have been populated.  This will give VS version-specific generators a
chance to recognize and adapt to the target system.
2014-07-28 16:26:00 -04:00
Brad King d0dd28fa92 VS: Save system name and version in global generator members
Add to cmGlobalVisualStudio10Generator members for SystemName and
SystemVersion and populate them in SetSystemName.
2014-07-28 16:25:08 -04:00
Brad King f5c0efdbe4 cmGlobalGenerator: Create a non-virtual 'DoGenerate' method
Make the virtual 'Generate' method protected.  Make 'DoGenerate'
the main entry point to generation.  This gives cmGlobalGenerator
a chance to do some early operations before the individual
generator-specific implementations take over.
2014-07-22 15:05:36 -04:00
Brad King 6e176e6d9e VS: Delay platform definitions until system name is known
Move the definition of CMAKE_VS_PLATFORM_NAME and other variables that
are not needed by CMakeDetermineSystem out of the AddPlatformDefinitions
method and into a SetSystemName method.  The latter may later use
CMAKE_SYSTEM_NAME to decide what platform-specific definitions to add.
2014-07-17 16:34:21 -04:00
Brad King eeb60102e8 VS: Refactor CMAKE_FORCE_*64 platform definitions
Remove the general infrastructure for these additional platform
definitions and hard-code the only two special cases that used
it.  They are only for historical reasons so no new such cases
should be added.
2014-07-17 16:17:35 -04:00
Brad King 528e8af19f Allow a toolchain file to specify a generator toolset
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command.  This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET.  This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.

The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.

Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
2014-06-04 14:27:02 -04:00
Brad King 98afb4549f VS: Split user- and generator-provided PlatformToolset
Divide the cmGlobalVisualStudio10Generator "PlatformToolset" member into
two members representing the generator-selected default toolset and the
user-specified CMAKE_GENERATOR_TOOLSET value.  Prefer the user-specified
value, if any, and then fall back to the generator-selected default.
2014-06-04 13:16:37 -04:00
Stephen Kelly c725bb3cbd Constify some APIs in generators. 2014-03-13 15:27:23 +01:00
Ben Boeckel 6557382dcf stringapi: Use strings for program paths 2014-03-08 13:05:38 -05:00
Ben Boeckel 1a1b737c99 stringapi: Use strings for generator names 2014-03-08 13:05:38 -05:00
Ben Boeckel 24b5e93de2 stringapi: Use strings for directories 2014-03-08 13:05:38 -05:00
Ben Boeckel 84fdc9921c stringapi: Pass configuration names as strings 2014-03-08 13:05:36 -05:00
Ben Boeckel c3833c7da4 stringapi: Use strings for VS project names 2014-03-08 13:05:33 -05:00
Ben Boeckel fabf1fbabb stringapi: Use strings in target name 2014-03-08 13:05:31 -05:00
Brad King 0c55729c13 VS: Add CMAKE_VS_(DEVENV|MSBUILD|MSDEV)_COMMAND variables
Since commit 5f5c92b9 (VS: Add internal APIs to find MSBuild,
devenv/VCExpress, and msdev, 2013-11-13) the VS generators have
known how to lookup the locations of their build tools directly.
Expose this information to CMake language code by defining new
variables to hold the paths to these tools.
2013-12-04 11:05:05 -05:00
Brad King 558c74d0ab VS: Switch to internal CMAKE_MAKE_PROGRAM lookup by generators
Drop the "Modules/CMakeVS*FindMake.cmake" files.  Override the
cmGlobalGenerator::FindMakeProgram method for VS generators to use their
internal APIs to locate the build tool.  Set the CMAKE_MAKE_PROGRAM as a
normal variable for use by project code, but do not cache it.  This will
allow CMake and CTest to select the proper tool at build time.
2013-11-18 11:30:50 -05:00
Brad King 5f5c92b9a2 VS: Add internal APIs to find MSBuild, devenv/VCExpress, and msdev
Teach the VS generators to compute the locations of these tools directly
from registry entries.  Add internal APIs to get the locations on demand.
2013-11-18 08:26:24 -05:00
Brad King 8904d1410b cmGlobalGenerator: Cleanup GenerateBuildCommand API
All cmGlobalGenerator::GenerateBuildCommand call sites that need to
produce a string now generate "cmake --build" commands.  The remaining
call sites immediately pass the result to cmSystemTools::RunSingleCommand.
Avoid the intermediate string and argument parsing by directly producing a
vector of strings.  Also drop the ignoreErrors argument because no call
sites remain that use it.
2013-11-18 08:26:21 -05:00
Brad King 29071fed2e VS: Add version year to generator names
Rename the Visual Studio >= 10 generators to indicate the version year:

 Visual Studio 10 => Visual Studio 10 2010
 Visual Studio 11 => Visual Studio 11 2012
 Visual Studio 12 => Visual Stduio 12 2013

Report the names with the year to the list of available generators so
that the cmake-gui drop-down shows the years.  When selecting a
generator from the "-G" option or from an existing CMAKE_GENERATOR cache
entry, recognize names without the years for compatibility and map them
to the names with years.

Update the generator names in the cmake-generators.7 manual.
2013-10-28 13:43:14 -04:00
Robert Maynard 3064f80d25 VS: Generate ToolsVersion matching each VS version
The MSBuild version for each Visual Studio generator isn't 4.0.  With
Visual Studo 2013 the ToolsVersion moved from being tied to the .NET
framework and now has its own version number.
2013-08-26 10:21:16 -04:00
Brad King 1ed726a46c Merge topic 'vs-masm'
28e770c VS10: Add support for assembler code (#11536)
2013-08-06 16:55:10 -04:00
Patrick Gansterer 28e770cf6e VS10: Add support for assembler code (#11536)
Use the masm BuildCustomizations, which are part of the Visual
Studio installation to allow compilation of asm files.
2013-08-05 16:34:10 +02:00
Patrick Gansterer b02f09d434 VS: Replace ArchitectureId with PlatformName
Since we do not need the information about the target architecture
we can use the PlatformName only to specify the this information.
This also removes setting of the MSVC_*_ARCHITECTURE_ID variable
which is not required, because this variable gets set by the
compiler detection code in CMAKE_DETERMINE_COMPILER_ID_CHECK().
2013-08-05 13:38:26 +02:00
Petr Kmoch de8be9ef7d Add projectDir parameter to GenerateBuildCommand
Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
2013-04-12 11:35:35 -04:00
Brad King 650c647160 VS: Implement generator toolset selection (#10722, #13774)
Implement generator toolset selection (cmake -T) for VS >= 10 by setting
the PlatformToolset.  Extend the RunCMake.GeneratorToolset test case to
verify CMAKE_GENERATOR_TOOLSET when the generator supports -T.

Since commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23)
all MSVC version information is detected during the compiler id step
from the actual compiler invoked by generated build systems rather than
hard-coded in VS generators.  Therefore we can set the PlatformToolset
in VS >= 10 project files and support toolsets from other VS versions.
2013-02-07 11:06:28 -05:00
Patrick Gansterer 75ebebc39c VS: Remove platform specific generator files
Move the whole logic into the base class and the factory.
2012-11-19 14:56:29 -05:00
Patrick Gansterer 5170a8800f Make cmGlobalGenerator::GetDocumentation() a static function
Making the function static allows us to call it directly,
without creating and removing an instance of the generator.
2012-11-19 12:54:50 -05:00
Patrick Gansterer e8f841473b Introduce the abstract class cmGlobalGeneratorFactory
This new abstract class allows us move some logic from the
cmGlobalGenerator into its own layer in a next step.
2012-11-19 12:54:30 -05:00
Brad King 89595d6bce VS10: Define CMAKE_VS_PLATFORM_TOOLSET variable
When the VS 10 generator selects a non-default PlatformToolset to
specify for MSBuild, report the selected name in this variable.
2012-08-22 16:35:46 -04:00
Patrick Gansterer 2c7a451de0 VS: Cleanup AddPlatformDefinitions() of Visual Studio generators
Move adding of definitions into cmGlobalVisualStudioGenerator to
share code and avoid duplicate architecture string literals.
2012-08-22 15:08:40 -04:00
Kitware Robot 7bbaa4283d Remove trailing whitespace from most CMake and C/C++ code
Our Git commit hooks disallow modification or addition of lines with
trailing whitespace.  Wipe out all remnants of trailing whitespace
everywhere except third-party code.

Run the following shell code:

git ls-files -z -- \
 bootstrap doxygen.config '*.readme' \
 '*.c' '*.cmake' '*.cpp' '*.cxx' \
 '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \
 '*.mm' '*.pike' '*.py' '*.txt' '*.vim' |
egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' |
egrep -z -v '^(Modules/CPack\..*\.in)' |
xargs -0 sed -i 's/ \+$//'
2012-08-13 14:18:39 -04:00
Peter Kuemmel a0700ba26c VC Express doesn't support folders, ignore USE_FOLDER property 2012-06-02 19:58:03 +02:00
Brad King d931ce9fe0 VS10: Generate relative source paths when possible (#12570)
Since commit ed0075bd (Use relative paths for custom command inputs,
2011-06-22) CMake generates full paths to source files in VS 10 project
files to avoid trouble with deep source/build tree paths.  However, the VS
10 IDE will not populate the source file property dialog for a file
referenced by full path.  Instead use a relative path when possible.  When
not possible produce a detailed warning explaining the problem and
suggesting use of shorter directory paths.
2012-04-27 14:14:36 -04:00
Brad King 72333a4648 VS10: Avoid creating .rule files next to outputs (#13141)
Hide custom command .rule files inside the CMakeFiles directory.  Ensure
a short, deterministic, and unique name by using a hash of the directory
path containing the output file.  Preserve the file name so the entry in
the IDE is human-readable.  Clarify the comment that explains why the
rule file must be created on disk.
2012-04-18 15:54:35 -04:00
Brad King 9c0a00d6dd Rename/constify build-time config placeholder lookup
Rename cmGlobalGenerator::GetCMakeCFG{InitDirectory => IntDir} to
have a shorter name without a typo.  Add a 'const' qualifier since
the method is only for lookup and never needs to modify anything.
2012-03-09 15:16:03 -05:00
Brad King 3d5632ed59 Add Visual Studio 11 generator for x86 and x64 tools 2011-09-23 10:10:01 -04:00
Matej Hribernik d44c68f39e VS: Factor Find64BitTools out of Win64 generator to parent
It will be shared with a forthcoming IA64 generator.
2011-06-20 08:29:40 -04:00
Brad King fb97ba6293 Enable 64-bit tools with VS 2010 Express (#9981, #10722)
The Express Edition does not come with 64-bit tools, but one can install
the "Microsoft Windows SDK v7.1" to get them.  Detect this case and
check for the SDK.  If found, set PlatformToolset to use the SDK tools.
Otherwise, fail with a concise and informative error.
2010-12-01 12:48:32 -05:00
Brad King c7b0dbb3fc Fix VS 10 value of CMAKE_CFG_INTDIR
VS 10 provides $(Configuration) and $(ConfigurationName) but only the
former is documented so we prefer it.  This also makes CMAKE_CFG_INTDIR
consistent with its documentation.  See issue #9916.
2009-11-18 15:50:29 -05:00
Brad King 96afb12087 Convert CMake to OSI-approved BSD License
This converts the CMake license to a pure 3-clause OSI-approved BSD
License.  We drop the previous license clause requiring modified
versions to be plainly marked.  We also update the CMake copyright to
cover the full development time range.
2009-09-28 11:43:28 -04:00
Brad King 09e398fa9f Create VS generator GetRegistryBase method
This method returns the registry key

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\<version>

A protected GetIDEVersion method retrieves the version-specific part of
the key name.
2009-09-16 11:44:08 -04:00
Bill Hoffman 5c4208f50e ENH: only 5 failing tests for VS 10 2009-07-10 09:12:39 -04:00
Bill Hoffman 798024bebf ENH: fix line length issues 2009-06-26 11:50:09 -04:00
Bill Hoffman 7491f52992 ENH: first pass at VS 10, can bootstrap CMake, but many tests still fail 2009-06-25 16:41:57 -04:00