Under Windows "locationURI" must be used for virtual folders, while
"location" must be used only for linked folders. Under Linux it doesn't
seem to matter.
Alex
08b9397 find_package: Fix system package registry test path conversion
93021ad find_package: Test system package registry when possible
b95f3ca find_package: Check both 32-bit and 64-bit registry views
a0d76c1 find_package: Search a "system package registry"
549458f find_package: Document user package registry locations
c9563db find_package: Cleanup user package registry less aggressively
4df1197 find_package: Rename implementation of user package registry
08fa5dd Also generate dependers-graphviz files.
4f96a76 GRAPHVIZ_IGNORE_TARGETS is now a list of regular expressions
5698ad2 Make it possible to exlude external libs from dot files
The system package registry is under HKEY_LOCAL_MACHINE\SOFTWARE which
has separate views for 32-bit and 64-bit applications. Look in both
views, but prefer the architecture matching the build target platform.
Generalize the "user package registry" created by commit ed0650f6 (Teach
find_package to search a "package registry", 2009-09-01). Define a
corresponding "system" registry key under HKEY_LOCAL_MACHINE. This
gives package installers a place to create a registry value that points
at the right location for find_package() to locate the package.
Delete only REG_SZ entries that are specifically detected to point to
invalid paths. This will allow future versions to add other value types
for different purposes.
This file has not been used in KWSys since commit "Moved test for large
file support into kwsysPlatformCxxTests.cxx", 2006-08-25. CMake 2.6.0
and above come with a copy of this module anyway, and KWSys has required
CMake 2.6.3 since commit "KWSys: Require at least CMake 2.6.3",
2011-03-01.
234bae7 VS10: Fix exit code of custom commands with setlocal/endlocal (#11938)
b98fdd5 VS: Use setlocal/endlocal only in VS 10 custom commands
06fcbc4 VS10: Fix working directory of consecutive custom commands (#11938)
Use the pattern
setlocal
...
endlocal & call :cmErrorLevel %errorlevel% & goto :cmDone
:cmErrorLevel
exit /b %1
:cmDone
if %errorlevel% neq 0 goto :VCEnd
in custom commands to preserve the %errorlevel% from inside the
setlocal/endlocal block.
The setlocal/endlocal and errorlevel pattern added by commit 06fcbc47
(VS10: Fix working directory of consecutive custom commands, 2011-04-08)
does not work well in VS 7.1. Restore the original behavior for VS
versions that do not need the new behavior.
Copy the files specified in CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA to the right
directory when packaging components. This fixes#12061.
Signed-off-by: Eric NOULARD <eric.noulard@gmail.com>
The parent commit assumed that "cd /d" would work in all Windows shells.
While all modern versions of windows have shells that support it, the
shells used by NMake and Borland make do not. Borland make does not
seem to even support changing drive letters with "d:". Just revert the
feature for all make tools except MinGW where the shell is known to
support this feature.
Teach cmLocalUnixMakefileGenerator3::CreateCDCommand to change working
directories for make tools using a Windows shell using "cd /d" instead
of just "cd". This tells the shell to change the current drive letter
as well as the working directory on that drive.
Commit abaa0267 (When the working directory for a custom command is on
another drive..., 2007-12-17) fixed the same problem for VS IDE
generators as reported by issue #6150.
The VS 10 msbuild tool uses a single command shell to invoke all the
custom command scripts in a project. Isolate the environment and
working directory of custom commands using setlocal/endlocal. The
form of each command is
set errlev=
setlocal
cd c:\work\dir
if %errorlevel% neq 0 goto :cmEnd
c:
if %errorlevel% neq 0 goto :cmEnd
command1 ...
if %errorlevel% neq 0 goto :cmEnd
...
commandN ...
if %errorlevel% neq 0 goto :cmEnd
:cmEnd
endlocal & set errlev=%errorlevel%
if %errlev% neq 0 goto :VCEnd
so that all changes to the environment and working directory are
isolated within the script and the return code is preserved.
Some find modules call find_package recursively to locate a package
configuration file for the package instead of searching for individual
pieces. Commit 79e9b755 (Help recursive find_package calls in modules,
2008-10-03) taught find_package to forward the version number and EXACT
arguments through the recursive call automatically. Do the same for the
component list.
When reading archive entries from disk strip any xattr and acl entry
headers that may have been loaded from the filesystem (e.g. selinux).
These fields are only useful for backup tools and not for packaging and
distribution of software. Furthermore, the GNU tar 1.15.1 on at least
one Linux distribution treats unknown entry headers as an error rather
than a warning. Therefore avoiding such fields is necessary for archive
portability.
Suggested-by: Tim Kientzle <tim@kientzle.com>
3e32db7 cmCTestUploadCommand::CheckArgumentKeyword should return false if not FILES
6b6f309 Add the FILES keyword to ctest_upload command
28cdd0a Don't tar/gz ctest_upload() files
fbe4356 Change 'Files' tag to 'Upload' in Upload.xml
350546d Implement ctest_upload command
For VS2010 if a precompiled .obj file was the output of a custom commad,
it was used as part of the build. If it was not, then VS did not
use it as part of the build. This commit updates the test to check
for this issue, and fixes the problem. This fixes bugs #0011891 and
Also allow generators to override the default packaging method.
Add a ONE_PER_GROUP option so that method can be specified by the user without relying on defaults.
All commands accepting file paths should normalize the slashes so that
the string-represented names can be compared reliably. The commands
add_library and add_executable have done this for years. We taught
add_custom_command to normalize its OUTPUT names in commit a75a0a14
(Normalize add_custom_command OUTPUT names, 2010-12-15). We handled a
special case of the DEPENDS option in commit 7befc007 (Handle trailing
slashes on add_custom_command DEPENDS, 2011-01-26).
Teach both add_custom_command and add_custom_target to normalize slashes
of DEPENDS files up front. This approach subsumes the above-mentioned
special case so remove the one line added for it but keep its test.
Extend the CustomCommand test to check that slash count mismatches
between custom command OUTPUT and DEPENDS can still be linked correctly.
A search-and-replace in commit 8d32d229 (make commands lower case by
default, 2007-10-10) accidentally changed the variable reference
CMAKE_INCLUDE_DIRECTORIES_BEFORE to CMAKE_include_directories_BEFORE.
Change it back.
The curses dialog (ccmake) allows variables to be specified on the
command line. If any of these variables is used during any configure
iteration or during generate we must not warn about it.
The Qt dialog (cmake-gui) allows variables to be added and removed in
the GUI interactively. If a variable is added, removed, and then added
again we must still warn if it is unused.
Set target property RUNTIME_OUTPUT_DIRECTORY explicitly on ProcessFwd9x
and EncodeExecutable so that we know exactly where the executables will
exist on disk.
At some point in the past VS 2010 failed some tests with custom commands when
relative paths were not used. It seems that those problems have been fixed.
However, the relative paths apparently are appended to the current working
directoy before vs accesses the file. So, with a long path, relative paths
cause it to create a combined path that is too long.
86cb17b Pass include directories with response files to GNU on Windows
9a0b9bc Optionally pass include directories with response files
6e8a67f Generate target-wide flags before individual build rules
d099546 Factor old-style -D flags out from -I flag generation
Some samples of things that got unnoticed by our nightly builds:
$ JAVA_HOME= mvn
Warning: JAVA_HOME environment variable is not set.
...
$ mvn
[INFO] Scanning for projects...
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD FAILURE
...
Create platform option CMAKE_<lang>_USE_RESPONSE_FILE_FOR_INCLUDES to
enable use of response files for passing the list of include directories
to compiler command lines.
This switches the internal generation order but does not affect the
results. The new order ensures that any internal state changed by
generating target-wide flags is known when the individual rules that use
those flags are generated.
Move the GetDefineFlags call from cmLocalGenerator::GetIncludeFlags to
all call sites so that the method exclusively constructs a string of
include search path flags.
Avoid GCC warning
warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
added by commit c6a8e4c7 (The link interface of MODULE libraries is
empty, 2011-03-09).
Several major Linux distributions still do not provide Git >= 1.6.5.0 in
their stable package lists. Prior to commit 1173cc4a (Update Git
submodules with --recursive, 2011-02-22) CTest was able to use older Git
versions but simply silently failed to update submodules recursively.
Instead of failing with older Git versions preserve the status quo and
add a warning in the update log. Users testing projects with recursive
submodules may simply update to a Git new enough to support them.
MODULE libraries cannot be linked into other libraries and executables
(just like executables without ENABLE_EXPORTS). Set the MODULE target
link interface to be empty. This allows such targets to be installed in
an EXPORT set without including all their private implementation
dependencies.
Commit afd7d4ca (Add target property LINK_SEARCH_END_STATIC, 2008-01-31)
defined a property to ensure that static runtime libraries get selected.
Add a property to specify that all libraries whose type is unknown, such
as "-lm", should be assumed static. Furthermore it assumes that an
option such as "-static" is also used so that no initial -Bstatic is
needed.
1a8eed1 Merge branch 'add-STRING-subcommand-FIND-issue-11795' into fix-2828-more-info-in-script-mode
006124b Avoid direct use of std::stringstream
8a8da36 Merge branch 'fix-2828-more-info-in-script-mode' into add-STRING-subcommand-FIND-issue-11795
1462561 Add a string(FIND) sub-command (#11795)
79e13af Add XML escaping for directory name in Eclipse projects (#11658)
8074bca Fix XML escaping for target names in Eclipse project files (#11658)
cb94587 Fix XML escaping for the project() name in Eclipse projects (#11658)
Using sort results in a possibly-modified sorting
when all elements are "tied" - use stable_sort instead
to preserve the original ordering of tied elements.
The Clang compiler warns about extra parenthesis in the code
if ((form->curpage == field->page))
~ ^ ~
because the idiom is commonly used when an assignment is intended
instead of a comparison. Remove the extra enclosing layer.
Since CMake 2.6.3 add_custom_target() has a SOURCES option, this was not
yet considered in the C::B generator.
Also, now GENERATED files are not added to the project.
Alex
Now a virtual folder "Subprojects" is created, and in this virtual folder
is a linked resource for each project().
This can be considered a fix for #11657
Alex
The Intel Fortran plugin forgets to create the output directory into
which it will write a DLL's import library. Utilize the fix added by
commit f4b3bdc6 (Create an exe's implib output dir for VS, 2009-06-15)
and generalized by commit 764ac980 (Generalize exe implib dir creation
for VS, 2009-06-16). Create a pre-link rule to make the directory.
To avoid name clashes.
Before this commit, name clashes can occur when invoking gcov on a
project that uses the same file name in different directories. The
--preserve-paths flag ensures all file names have a complete path,
avoiding name clashes.
Thanks to "McBen <viertelvor12@gmx.net>" for the patch.
(Did not preserve original commit author information because
we have a push check for first and last name, and do not
accept authors with only an alias...)
Make it clear that list subcommands that modify the list
do so in the current CMake variable scope, regardless of
the original scope of the list variable involved.
KWSys Robot
Brad King
Alex Neundorf
Zach Mullen
Manuel Klimek
Eric NOULARD
David Cole
Martin Konrad
Johan Björk
Bill Hoffman
Clinton Stimpson
Rolf Eike Beer
Modestas Vainius
Tim Hütz
Marco Craveiro