Extend the cmGeneratorExpressionDAGChecker with an interface
returning the name of the top target. Use that to determine
when there is a DAG violation, as required by the RunCMake.Languages
tests.
The output of this expression may contain macros for IDEs to replace
such as $(Configuration), $(CURRENT_ARCH) etc. To avoid generating
content which is not usable in other contexts, report an error if
there is an attempt to use it in other contexts.
This commit may be reverted in the future if a solution to the
above difference is implemented.
Remove use of UseObjectLibraries from Makefile and Ninja generators. It
is not needed now because those generators use GetExternalObjects
which already contains the objects from object libraries.
The VS10 generator calls both the UseObjectLibraries and the GetExternalObjects
methods. Ensure that duplicates are not created by skipping objects
from object libraries in handling of GetExternalObjects.
Similarly, fix VS6, VS7 and Xcode object handling by skipping
external objects from OBJECT_LIBRARY usage as appropriate.
The error message in the BadSourceExpression1 test is now reported
by the generator expression evaluator, so it has different text.
These policies are triggered by the use of a particular compiler rather
than outdated CMake code in a project. Avoid warning in every project
that enables a language by not displaying the policy warning by default.
Add variable CMAKE_POLICY_WARNING_CMP<NNNN> to control the warning
explicitly; otherwise enable the warning with --debug-output or --trace.
This breaks with strict policy convention because it does not provide
developers with any warning about the behavior change by default.
Existing projects will continue to build without a warning or change in
behavior. When a developer changes the minimum required version of
CMake in a project to a sufficiently high value (3.0), the project will
suddenly get the new compiler id and may break, but at least the
breakage comes with a change to the project rather than the version of
CMake used to build it.
Breaking strict policy convention is worthwhile in this case because
very few projects will be affected by the behavior change but every
project would have to see the warning if it were enabled by default.
Add inline reST markup as appropriate. Word CMP0047 docs more like
those of CMP0025. State explicitly that the policies must be set
before the project or enable_language command calls.
As well as the traditional variables, providing imported targets is
suggested, and the relative advantages and disadvantages briefly
discussed.
A mini-tutorial walking through creating a simple find module is
provided.
This changes the recommended version variable from Foo_VERSION_STRING to
Foo_VERSION, because there is really no need to have different variable
names for package version files vs. find modules. It notes the old
variable name, though, and suggests setting it for compatibility.
Not everything that isn't MSVC is GCC. I have support for LDC's depfile
format on its way upstream[1], but its future is uncertain. CMake should
at least support this for future depfile formats.
[1]https://github.com/martine/ninja/pull/721
Rely on evaluation in cmCustomCommandGenerator for the generators.
When tracing target dependencies, depend on the union of dependencies
for all configurations.
Restore support for the undocumented <CONFIG>_LOCATION target property
removed by commit v3.0.0-rc1~175^2 (cmTarget: Remove support for
<CONFIG>_LOCATION property, 2013-12-30) as part of the CMP0026 OLD
behavior.
489b1c23 Windows: Use response files to specify link libraries for GNU tools
745caae6 Makefile: Rename linker response file boolean to be more specific
5e8e4d0f cmLocalGenerator: Add response file option to OutputLinkLibraries
b9aa5041 cmLocalGenerator: Simplify GetIncludeFlags output formatting
971653b7 cmLocalGenerator: Add format option to ConvertToLinkReference
0c0ef9e7 cmLocalGenerator: Add format option to ConvertToIncludeReference
02bebd60 cmLocalGenerator: Add format option to ConvertToOutputForExisting
c8751709 Makefile: Factor out some duplicate link libraries generation
Work around the command-line-length limit by using an @linklibs.rsp
response file to pass the flags for link libraries. This allows
very long lists of libraries to be used in addition to the existing
support for passing object files via response file.
Suggested-by: Peter Keuschnigg <peter.keuschnigg@pmu.ac.at>
Recently used cmake-gui locations are searched only on Windows because
the Windows registry is used to record the values. This behavior is
historical and may be removed by a policy in the future so rather than
implementing it on other platforms simply document the current behavior.
This command does not support generator expressions. The documentation
was mistakenly extended to claim it in commit v3.0.0-rc1~60^2~3 (Help: Mark
up the buildsystem commands documentation, 2014-02-03).
Since commit v2.8.12~437^2~2 (VS: Separate compiler and linker PDB files
2013-04-05) we no longer set /Fd with the PDB_NAME or PDB_OUTPUT_DIRECTORY
properties. Those properties now exclusively handle linker PDB files.
Since STATIC libraries do not link their compiler PDB file becomes more
important. Add new target properties "COMPILE_PDB_NAME[_<CONFIG>]" and
"COMPILE_PDB_OUTPUT_DIRECTORY[_<CONFIG>]" to specify the compiler PDB
file location and pass the value to the MSVC /Fd option.
048be205 Help: Add release notes for the 'faster-parsers' topic
7c565d2f cmGeneratorExpression: Improve parsing in StripEmptyListElements
68eb1757 cmGeneratorExpressionLexer: Use a switch statement to parse
67253133 ExpandListArguments: Optimize the parser
Move the note about VS 6 into the PDB_NOTE.txt common include file
and include it from the per-config properties too. Also re-word
the note to clarify the separate compiler and linker flags involved
and state explicitly that compiler flags are not affected.
6e89c8a5 install: Support generator expressions in FILES and PROGRAMS mode
f11f7b34 cmInstallFilesGenerator: Add reference to calling cmMakefile
e190236c Help: Format install() command documentation
Teach the install(FILES) and install(PROGRAMS) commands to evaluate
generator expressions in the list of files.
Extend the ExportImport test to cover installation cases involving
generator expressions.
Historically CMake used three version components for the feature level.
We released new features while incrementing only the third version
component. Since commit v2.8.2~105^2~4 (New version scheme to support
branchy workflow, 2010-04-23) we used the fourth version component for
bug-fix releases and the development date:
<major>.<minor>.<patch>[.<tweak>][-rc<n>] = Release
<major>.<minor>.<patch>.<date>[-<id>] = Development
This solidified use of three components for the feature level, and was
necessary to continue releasing 2.x versions because:
* Some existing projects performed floating-point comparisons of
${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION} to 2.x numbers
so ``x`` could never be higher than 9.
* Version 2.9.<date> was used briefly in post-2.8.0 development in
CVS prior to the transition to Git, so using it in releases may
have caused confusion.
Now that we are moving to 3.x versions, these two restrictions go away.
Therefore we now change to use only two components for the feature
level and use the scheme:
<major>.<minor>.<patch>[-rc<n>] = Release
<major>.<minor>.<date>[-<id>] = Development
People will be tempted to put things there for convenience, thereby
causing conflicts similar to
http://thread.gmane.org/gmane.comp.compilers.clang.devel/35162/focus=35169
where it is conceivable that the LLVM developers could put a flag on
a target for convenience, which would cause conflicts for some downstreams.
When building boost with an alternate namespace the libraries generated
will have a different naming convention. This is often done to ensure
no symbol conflicts with external libraries built against a different
version of boost. If the namespace used is "myprivateboost::" instead
of "boost::" then the libraries built will be named myprivateboost_foo
instead of boost_foo. Add an option to specify a custom namespace used
to alter the library names that get searched for.
Manually read through version control history since the 2.8.12.2
release and write release notes for important user-facing changes.
Co-Author: Stephen Kelly <steveire@gmail.com>
Starting with 3.0 we will use only two components for the feature level,
and policies are only ever introduced with a bump to the feature level
version.
4b7f2f52 Help: Add hyperlink targets for argument types in cmake-language(7)
113df227 Remove ChangeLog.manual
79f55909 Remove ChangeLog.txt
d25dbc90 Tests/BundleTest: Drop use of ChangeLog.txt
ccc87047 Help: Add documents to collect notes between releases
70309e70 Help: Add documents for release notes
34ea1f15 Utilities/Sphinx: Add option to build 'text' format
Describe the meaning of each version component in more detail in the
documentation of CMAKE_VERSION. Simplify the per-component version
variable documentation by referencing the main variable.
Include information about how to compare version strings. Also add
an historical note about the version scheme used prior to commit
v2.8.2~105^2~4 (New version scheme to support branchy workflow,
2010-04-23).
Add a release/dev.txt file and include it from release/index.rst in
development versions. Add a "Changes Since Release" section with a
toctree that globs adjacent "dev/*" documents. Add a sample topic
document explaining how topic-specific release note documents work.
This approach will allow developers to write release notes for their
changes as they are made. The release manager may then consolidate and
organize the notes for a specific release version.
Add a release/index.rst document titled "CMake Release Notes" to hold
the toctree for release notes. Add a "Release Notes" section to the
top-level html document index to link to the new document.
The old documentation stated that "all header files" were considered,
which was not true for any sensible definition of "all header files".
Only header files with certain names are considered.
Document the filename patterns matched for parsing.
4271a4ed Help: Add information about INTERFACE_AUTOUIC_OPTIONS.
7935f4de Help: Note that AUTOMOC consumes the defines and includes from targets.
2739a6f9 Help: Move Qt tool invocation information to a generic cmake-qt manual.
Add an introduction about the use of different package types, and the
ability to use Qt 4 and 5 versions together in a single buildsystem.
Add a section about automatic linking of the qtmain.lib library and
how to disable it.
Teach the project() command to set variables
{PROJECT,<PROJECT-NAME>}_VERSION{,_MAJOR,_MINOR,_PATCH,_TWEAK}
holding the project version number and its components. Add project()
command option "VERSION" to specify the version explicitly, and default
to the empty string when it is not given.
Since this clears variables when no VERSION is given, this may change
behavior for existing projects that set the version variables themselves
prior to calling project(). Add policy CMP0048 for compatibility.
Suggested-by: Alex Neundorf <neundorf@kde.org>
Teach the project() command to recognize an optional "LANGUAGES"
keyword after the project name and prior to the list of languages.
Do not allow multiple copies of the keyword. If the keyword is
specified and no languages are listed, imply NONE.
Introduce policy CMP0047 to control resetting the id for
compatibility.
De-duplicate content in the QNX platform file by including the GNU
one. QNX is a form of GNU platform.
Do not clear CMAKE_SHARED_LIBRARY_${lang}_FLAGS variables. They
are populated again later by the Compiler/GNU.cmake file anyway.
Modify the CMAKE_CXX_COMPILE_OBJECT variable only when the QCC
compiler id is in use, and the language is CXX. Use the QNX
recommended flag for QCC instead of the gcc compatible -x flag.
Populate new module files to handle system includes and depfiles
when using the QCC compiler.
Remove code which unsets the system include and depfiles related
variables. When a GNU driver is used instead of the QCC one, the
appropriate flags will be used. These variables were previously
cleared for lowest-common-denominator compatibility with both
drivers.
Define a new 'CMAKE_CONFIGURE_DEPENDS' directory property that projects
can use to specify input files to the CMake configuration process.
Extend the RunCMake.Configure test to verify that the build system
re-runs CMake when this input changes.
Add documentation entries for variables
CMAKE_OSX_ARCHITECTURES
CMAKE_OSX_DEPLOYMENT_TARGET
CMAKE_OSX_SYSROOT
Explain what each does and when/how they should be set.
Remove independent doc listing for Qt4ConfigurationSettings, Qt4Macros
and UseQt4. These are implementation details.
Recommend the use of IMPORTED targets.
Remove references to the UseQt4 file, which is obsolete in light of
the IMPORTED targets.
Add documentation for automatic tool invocation and options.
Remove reference to variables which should not be needed in modern
implementations.
73e9340 get_target_property: Error on non-existent target.
ab9f58f FindQt4: Ensure target exists before calling get_target_property.
37ebeb9 FindQt4: Fix use of get_target_property to use actual target name.
6aabb6a Genex: Use case-sensitive comparison for COMPILER_ID.
5bb53f6 cmTarget: Deprecate COMPILE_DEFINITIONS_ properties with a policy.
Stephen Kelly
Brad King
Alex Merry
Ben Boeckel
Jiri Malak
Matthäus G. Chajdas
Ben Boeckel
Chuck Atkins
Alex Merry
Raphael Kubo da Costa
Rolf Eike Beer
Nils Gladitz
Eran Ifrah