Explain exactly why CMake is looking for a package configuration file
and who is expected to provide what:
CMake Error at CMakeLists.txt:7 (find_package):
By not providing "Find<pkg>.cmake" in CMAKE_MODULE_PATH the caller
has asked CMake to find a package configuration file provided by
"<pkg>", but CMake did not find one.
Could not find a package configuration file provided by "<pkg>"
with any of the names:
<pkg>Config.cmake
<pkg>-config.cmake
Add the installation prefix of "<pkg>" to CMAKE_PREFIX_PATH or
set "<pkg>_DIR" to a directory containing one of the above files.
If "<pkg>" provides separate development package or SDK be sure
it has been installed.
The first paragraph explains how CMake is interpreting the intention of
the caller. This puts the blame or credit at the call site in the
project code where it belongs both when it is a bug and when it is
intentional. It can be dropped in NO_MODULE mode.
Suggested-by: Brad King <brad.king@kitware.com>
In commit 41c2895b (Added version support to Config mode of find_package
command, 2008-01-28) the error message was computed but was not
reported. Add the SetError call to report it.
The purpose of the TargetType enumeration was overloaded for install
type because install rules were once recorded as targets. Factor the
install types out into their own enumeration.
This concerns all variables common to all CPack generators.
Variables mainly used and/or set in CPack.cmake are documented
therein. C++ built-in variables are documented in
cmCPackDocumentVariables.cxx.
The confluence of the ninja-generator and target-include-directories
branches conspired to produce a nice little compiler error when
they were both merged into 'next'...
Yay for Continuous dashboards!
For strict backwards compatibility only. This should be unnecessary at
this point, but introducing a policy to deprecate it properly is a
whole different topic branch...
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
35c48e1 Check*.cmake: Expand imported targets in CMAKE_REQUIRED_LIBRARIES
61cb4ea bootstrap: move while() and endwhile() into the bootstrap build
c9f2886 -don't pull in CheckTypeSize.cmake from the cmake which is being built
628f365 -remove trailing whitespace
Generally these are only required in build statements, as Ninja wants
to be able to chop paths up. But it doesn't hurt to also try to use
them in command line arguments.
This did not work because find_library() did only treat the given name as
complete filename if is matched "PREFIX.*SUFFIX":
find_library(MYLIB libfoo.so.2)
Now it is also taken as a whole if the name matches "PREFIX.*SUFFIX\..*".
If a variable exists called CMAKE_PROJECT_<projectName>_INCLUDE,
the file pointed to by that variable will be included as the last step
of the project command.
For Visual Studio using the Preprocessor Define _SBCS. This behavior
is similar to the way that _UNICODE and _MBCS work already.
Added tests to confirm this behavior.
Append a random number to the "cmTryCompileExec" file name to avoid
rapid creation and deletion of the same executable file name. Some
filesystems lock executable files when they are created and cause
subsequent try-compile tests to fail arbitrarily. Use a different
name each time to avoid conflict.
Even if there are no lines covered in the file the gcov coverage report still
contains valueable information, the amount of uncovered lines and which exactly
they are. Set 'Covered="true"' for files we have a gcov report for even if they
have no lines covered. Otherwise CDash will neither show the uncovered line
count nor the detailed coverage report for this file.
When CTEST_EXTRA_COVERAGE_GLOB was used to collect otherwise uncovered files
'Covered="true"' was unconditionally set, so this can't be worse here.
d4b77eb Avoid discovering system infos for documentation. Adding some path is enough.
9002f73 Fix non existent std::string::clear on VS6
02ccb32 Create getDocumentedModulesListInDir which may be used in other context.
24fbc28 Add missing section markup for CPackComponent
bafd8a9 Example of builtin variable documentation (i.e. only used in C++ source code).
543f1ad Make the load of script documentation more efficient and dynamic.
cdbd1a9 Fix another compiler warning due to a typo
52c53de Really avoid compiler warning about unused vars
37f90ed Calm down compiler warning about unused var
7c82b7f Fix potential bad memory access, thanks to Eike
62b589b Suppress unused var, beautify code, avoid 1 extra newline.
751713f Update bash completion file in order to handle new CPack doc options.
1629615 CPack Documentation extraction from CMake script begins to work
83e34dd Implement simple CMake script comment markup language.
c6a0169 CPack begin the implementation of --help-command* and --help-variables*
CPack help will be searched in any CPack*.cmake file located
near to CPack.cmake file. The script files is parsed iff
the first line begin with ##section. Moreover the documentation
section name is specified on the remaining part of the line
minus the space immediately following ##section.
OpenBSD shared library names end in a ".#.#" version number suffix.
Teach cmComputeLinkInformation to tolerate the extra suffix after
the normal library name suffixes when parsing library names.
5d18851 CPackArchive restore default behavior and provide new variable.
3cab24a CPack Add top level directory in component install for Archive Generators
When configuring or generating the 'ng' of the end of the second line
is not cleared. This patch fixes this.
The problem was introduced by commit fd632195 (ccmake: Align 'g' and 'q'
key instructions, 2011-01-07) which adjusted the length of lines that
need clearing.
The approach taken by commit 8704525f (Reject directory names containing
'=', 2011-01-14) was perhaps too heavy-handed for avoiding the obscure
cases when '=' in the path fails due to limitations of Make syntax.
Only two CMake tests:
LinkDirectory
OutOfSource
fail when the path contains '=' and they cover obscure cases. Instead
of rejecting such paths outright just warn when the problem may occur.
An implementation ;-separated list parsing was added by commit a1f976ce
(VS: Add support for three new project properties, 2011-11-23) and again
by commit 9e01aefd (VS: Add support for WinRT project properties,
2012-02-03). Refactor both instances to use ExpandListArgument.
VS_WINRT_EXTENSIONS: Boolean property that correspond to "Enable
Tailored Features" in Visual Studio 11 IDE.
VS_WINRT_REFERENCES: Semicolon-delimited list of *.winmd references to
add to the project, which creates a new <ItemGroup>.
CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY should be set by the user
in order to get the toplevel directory included in the archive
whenever a componentized archive is requested. This solves bug #12129
and keeps fully backward compatible behavior.
CMake doesn't find Visual C++ Express and uses "NMake Makefiles"
generator by default when one calls cmake WITHOUT using the -G options.
Teach CMake to find VC Express to use it as the default generator just
like the commercial versions.
Consider the case motivating commit e01cce28 (Allow add_dependencies()
on imported targets, 2010-11-19). An imported target references a file
generated at build time by a custom target on which it depends. Had the
file been built directly using add_library or add_executable its target
name would have been visible globally. Therefore the imported target
representing the file should be globally visible also.
Teach the IMPORTED signature of add_(executable|library) to accept a new
"GLOBAL" option to make the imported target visible globally.
- Enhance extract doc parser. Seems robust now. The legacy
module documentation parser works as before ignoring
the new markup.
- Proof of concept for CPack (generic), CPack RPM and CPack Deb
generator for macro and variables.
Try cpack --help-command and cpack --help-variables
The language is very simple. It use ##<keyword> special comment
which opens a structured documentation block and ##end closes it.
This may be used to extract documentation for macro as 'command'
and 'variables' such that cpack --help-command and --help-variable
does parse builtin modules files (CPack.cmake, CPackComponent.cmake,
...) in order to extract the corresponding doc.
This modifications set tries to keep the unified doc for cmake/ctest/cpack
while introducing tool specific documentation separated.
Some documentation sections for CMake do not fit well to CPack.
0df1942 Detect SGI MIPSpro compiler version with its id
a5e892c Document compiler version macro formats used for detection
d7c6f41 Detect HP compiler version with its id
3dd9fa9 Detect SunPro compiler version with its id
c198730 Detect Watcom compiler version with its id
5899b98 Detect Clang compiler version with its id
b8cfa65 Detect PGI compiler version with its id
6dae666 Detect IBM XL compiler version with its id
4080d55 Detect Borland compiler version with its id
2cc205a Detect Intel compiler version with its id (#11937)
a6d83cc Detect MSVC compiler version with its id
a662855 Detect GNU compiler version with its id (#6251)
fa7141f Add framework to detect compiler version with its id (#12408)
Since commit 183b9509 (Follow all dependencies of shared library private
dependencies, 2011-12-14) we honor LINK_INTERFACE_LIBRARIES when
following dependent shared libraries. The link interface properties may
form a cycle if set incorrectly by a project. Furthermore, the property
LINK_DEPENDENT_LIBRARIES may form a cycle if set incorrectly by hand
(though CMake should never generate one). In either case, do not follow
the cycle forever when following the dependent shared library closure.
We only need to add dependency edges to the constraint graph once.
Add "LinkInterfaceLoop" test to cover this case.
This wasn't necessary for TAR-like (TGZ, TBZ2, etc...) archive
because for those the size was 0. Either there is an error in
upstream libarchive concerning the size or we should not rely
on size of the entry for adding content.
6c611c6 libarchive: Restore CMake 2.6.3 as minimum version
2f5b677 libarchive: Update README-CMake.txt for new snapshot
156cb3b Merge branch 'libarchive-upstream' into update-libarchive
fd42bf1 libarchive: Set .gitattributes to allow trailing whitespace
4f4fe6e libarchive 3.0.2-r4051 (reduced)
65b6e19 libarchive: Avoid bogus conversion warning from PGI compiler
9ccaeb1 libarchive: Suppress PathScale compiler warnings
2309438 libarchive: Rename isoent_rr_move_dir parameter isoent => curent
b6ca96e libarchive: Include linux/types.h before linux/fiemap.h
f293b73 libarchive: Define _XOPEN_SOURCE=500 on HP-UX
6781a09 libarchive: Cleanup after ZLIB_WINAPI check
f15d757 libarchive: Remove hard-coded build configuration
3a9f449 libarchive: Use Apple copyfile.h API only if available
6af6b96 libarchive: Do not use MNT_NOATIME if not defined
02d5e40 libarchive: Check for 'struct statvfs' member 'f_iosize'
8b7ee30 libarchive: Do not use ST_NOATIME if not defined
...
Instead of enabling interrupt only when a progress or message callback is called, add a new callback specifically for
interrupt. This new callback is called from GetFatalErrorOccured() so cmake-gui can immediately report interrupt status
instead of calling queuing a call to cmSystemTools::SetFatalErrorOccured() and waiting for the progress or message
callback to be called to process that queued call.
Alex Neundorf
KWSys Robot
Peter Collingbourne
Brad King
Yury G. Kudryashov
Eric NOULARD
Bjoern Ricks
David Cole
Stephen Kelly
Peter Kuemmel
Rolf Eike Beer
Modestas Vainius
Bill Hoffman
Aaron C. Meadows
Nicolas Despres
Eugene Golushkov
Daniel Nelson
Clinton Stimpson