This is a partial revert of commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05).
As the interface includes and defines are now determined by the link
closure, there is no need to populate the corresponding properties
explicitly.
ba48e63 Generate config-specific interface link libraries propeties.
deb51a7 Remove unused forward declarations.
9712362 Don't allow utility or global targets in the LINKED expression.
faa927e Make sure INTERFACE properties work with OBJECT libraries.
510fdcb Whitelist target types in target_{include_directories,compile_definitions}
4de7178 Ensure that the build interface includes have been added.
df74bc3 Only append build interface include dirs to particular targets.
d4e5c67 Don't keep track of content determined by target property values.
1fb545a Move a special case for PIC from the genex to the cmTarget code.
57175d5 Only use early evaluation termination for transitive properties.
4cf161a Fix determination of evaluating link libraries.
3a298c0 Fix generation of COMPILE_DEFINITIONS in DependInfo.cmake.
655e98b Ensure type specific compatible interface properties do not intersect.
46e2896 The COMPATIBLE_INTERFACE does not affect the target it is set on.
5f926a5 Test printing origin of include dirs from tll().
7c0ec75 De-duplicate validation of genex target names.
...
Implement generator toolset selection (cmake -T) for VS >= 10 by setting
the PlatformToolset. Extend the RunCMake.GeneratorToolset test case to
verify CMAKE_GENERATOR_TOOLSET when the generator supports -T.
Since commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23)
all MSVC version information is detected during the compiler id step
from the actual compiler invoked by generated build systems rather than
hard-coded in VS generators. Therefore we can set the PlatformToolset
in VS >= 10 project files and support toolsets from other VS versions.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_TOOLSET and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorToolset test to cover basic "-T" option cases.
Verify that CMAKE_GENERATOR_TOOLSET is empty without -T, that -T is
rejected when the generator doesn't support it, and that two -T options
are always rejected.
e48d842 Cache context-independent includes on evaluation.
089fe1c Optimize genex evaluation for includes and defines.
179f495 find_package: Reword <package>_NO_INTERFACES documentation
e7b579b Test workaround of bad interface include directories from depends.
77cecb7 Add includes and compile definitions with target_link_libraries.
0b92602 Add the $<LINKED:...> generator expression.
0fa7f69 Add API to check if we're reading a includes or defines property.
2c3654c Add a way to exclude INTERFACE properties from exported targets.
d4297d5 Export targets to a targets file, not a Config file.
df4d2b2 Make it an error for INSTALL_PREFIX to be evaluated.
7ceeba9 Advance more when preprocessing exported strings.
30268b4 Handle reading empty properties defined by the link interface.
5484c60 Merge branch 'vs6-rule-files' into add-ExternalData-module
1fd8d01 ExternalData: Attach download rules to content links in IDEs
a6d3ffc Fix Module.ExternalData test on VS 6
aed590a Fix Module.ExternalData test on Cygwin
06e8ded Merge branch 'fix-atomic-rename-on-Windows' into add-ExternalData-module
e2e0d2e ExternalData: Collapse ../ components in DATA{} paths
ee2abfd ExternalData: Add support for SHA 1 and 2 hash algorithms
aa8b228 ExternalData: Generalize hash algo/ext handling
9e518a8 ExternalData: Allow DATA{} syntax to reference directories
175ed02 ExternalData: Allow ()-groups in series match regex
4befecc ExternalData: Add tests covering interfaces and errors
bcd2580 ExternalData: Improve series matching using an explicit syntax
c0cebcb ExternalData: Remove unused private interface
5275993 ExternalData: Cleanup stray TODO and typo in comments
7bb8344 ExternalData: Do not match directory names when resolving DATA{}
00d801f ExternalData: Remove compatibility with CMake < 2.8.5
...
This is both a short form of using a TARGET_DEFINED expression
together with a TARGET_PROPERTY definition, and a way to strip
non-target content from interface properties when exporting.
Use a trailing slash to reference a directory. Require that a list
of associated files be specified to select from within the directory.
One may simply use DATA{Dir/,REGEX:.*} to reference all files but
get a directory passed on the command line.
Add a Module.ExternalData test to verify data retrieval and test
argument DATA{} references.
Add a RunCMake.ExternalData test to verify error handling and automatic
transformation of a raw data to a content link and staged object.
6063fef Output include directories as LOG messages, not warnings.
aa66748 Specify the target whose includes are being listed.
d70204a Only output includes once after the start of 'generate-time' when debugging.
0d46e9a Store includes from the same include_directories call together.
Otherwise, we get a separate IncludeDirectoriesEntry for each include,
and that causes unnecessary and confusing splitting in the output when
debugging the INCLUDE_DIRECTORIES property.
This new expression allows checking how a policy was set when a target
was created. That information is only recorded for a subset of policies,
so a whitelist is used.
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
Historically CMake has always expanded ${} variable references in the
values given to include_directories(), link_directories(), and
link_libraries(). This has been unnecessary since general ${}
evaluation syntax was added to the language a LONG time ago, but has
remained for compatibility with VERY early CMake versions.
For a long time the re-expansion was a lightweight operation because it
was only processed once at the directory level and the fast-path of
cmMakefile::ExpandVariablesInString was usually taken because values did
not have any '$' in them. Then commit d899eb71 (Call
ExpandVariablesInString for each target's INCLUDE_DIRECTORIES,
2012-02-22) made the operation a bit heavier because the expansion is
now needed on a per-target basis. In the future we will support
generator expressions in INCLUDE_DIRECTORIES with $<> syntax, so the
fast-path in cmMakefile::ExpandVariablesInString will no longer be taken
and re-expansion will be very expensive.
Add policy CMP0019 to skip the re-expansion altogether in NEW behavior.
In OLD behavior perform the expansion but improve the fast-path
heuristic to match ${} but not $<>. If the policy is not set then warn
if expansion actually does anything. We expect this to be encountered
very rarely in practice.
This command works only when building projects using the same
architecture as the running CMake binary. Since it was introduced
CMake has learned macro() and function() to add commands, and the
execute_process() command to launch advanced external computations.
Add a RunCMake.load_command test to verify the warning appears.
It should be possible for example to do this:
"$<AND:${FOO},$<BOOL:${TGT}>,$<BOOL:$<TARGET_PROPERTY:${TGT},PROP>"
such that it works simliarly to the C code:
if (foo && tgt && tgt->prop())
{
}
The example of generator expression code is a little bit contrived as
it could be written other ways with the same functionality. Nevertheless,
as these cases already work and are intentional, test for them.
This fixes a regression introduced in commit 290e92ad (Move
GetIncludeDirectories to cmGeneratorTarget, 2012-09-16) which loops over
cmGeneratorTargets before they get created, so the container is empty.
Otherwise the comma is treated as plain text by ParseContent.
$<STREQUAL:,> should be valid and true.
$<STREQUAL:,something> should be valid and false.
$<STREQUAL:,,> should be non-valid as it is 3 parameters.
$<STREQUAL:something,,> should be non-valid as it is 3 parameters.
Additionally, this allows reporting the correct error for other
expressions. For example $<TARGET_PROPERTY:,> should be invalid
because it has an empty target and empty property. It shouldn't
attempt to read the property ',' on the 'implicit this' target.
The expressions may be parsed and then cached and evaluated multiple
times. They are evaluated lazily so that literals such as ',' can be
treated as universal parameter separators, and can be processed from
results without appearing literally, and without interfering with the
parsing/evaluation of the entire expression.
This expression evaluates to '1' or '0' to indicate whether the build
configuration for which the expression is evaluated matches tha named
configuration. In combination with the "$<0:...>" and "$<1:...>"
expressions this allows per-configuration content to be generated.
Stephen Kelly
Brad King
Petr Kmoch