The git submodule porcelain must be executed from the top level of the
work tree. Use 'git rev-parse --show-cdup' to find the top level
relative to the source tree. This is better than searching up the tree
for .git ourselves because it will always work the same way Git does and
thus honors settings like GIT_DISCOVERY_ACROSS_FILESYSTEM.
Commit c3781efb (Support Git upstream branch rewrites, 2010-06-08)
assumed that ".git/FETCH_HEAD" exists inside the source tree. Fix the
implementation to handle a work tree using a ".git file" to link to its
repository. Use "git rev-parse --git-dir" to locate the real .git dir.
If .git/FETCH_HEAD provides no merge candidate do not attempt to update.
Also log FETCH_HEAD lines as we parse them since they are essentially
output from the git fetch command.
38c762c Merge 'remove-CTestTest3' into ctest-file-checksum
46df0b4 Activate retry code on any curl submit failure.
8705497 Checksum test should use CMAKE_TESTS_CDASH_SERVER
d0d1cdd Mock checksum failure output for old CDash versions
af5ef0c Testing for CTest checksum
86e81b5 CTest should resubmit in the checksum failed case
d6b7107 Fix subscript out of range crash
082c87e Cross-platform fixes for checksum/retry code
e525649 Checksums on CTest submit files, and retry timed out submissions.
Previously, we were only going into the retry block
for time out conditions. But a "could not connect"
response, or really any sort of curl failure, is
also a condition where we should retry the submit
if the user has requested a retry.
Fix niggly in ExternalProject that would inadvertently
create a log file of output when a command was explicitly
set to the empty string.
Also, increase the default value for showing context
around build errors to 10 lines, up from 6. Also add
the ability to customize this setting so that users
can put it back to 6 or even lower if they want, or
show more if they want.
Clang is smart enough to recognize that "*(int*)0=0" invokes undefined
behavior, warns, and produces an "undefined instruction". The message
in commit "Avoid Clang optimizer bug in testProcess-[45]" (2010-07-02)
is incorrect; this is not a Clang bug. It really is undefined
behavior. Use "*(int*)1=0" to produce a crash instead.
Clang's optimizer, as of clang version 2.8 (trunk 107463), produces the
undefined instruction 'ud2' for the code "*(int*)0=0" on OS X x86_64.
It causes our crash tests to fail because the child process exits with
an invalid instruction instead of a segmentation fault. Work around the
bug by using "*(int*)1=0" in this case.
Add option KWSYS_TEST_BOGUS_FAILURES that can be set by a containing
project or in the CMake cache to list tests known to fail consistently
on a buggy system.
Commit ff1f8d0b (Fix or cast more integer conversions in cmake) changed
a member type from int to size_t. Update the types of variables
compared to these values to be unsigned also.
Both possible result values need to be convertible to the same type.
Some compilers fail to recognize that they can construct std::string
from the empty string literal, so state it explicitly.
Since commit "Provide unix-sytle command line parsing" (2009-07-13) the
reference to KWSYS_C_HAS_PTRDIFF_T in System.c has been meaningless
because the macro was never passed to the compiler!
Separation by ',' only works in VS 2008 and below and does not work in
the PlayStation3 VS plugin. Separation by ';' works in VS 10 and all
prior versions.
Change types of local variables, or casting, or re-arrange
expressions to get rid of "conversion may alter value" warnings
as seen on recent dashboard submissions from londinium.kitware.
I naively assumed in my previous commit that the Convert call
would correctly convert a relative path file name correctly
relative to the makefile's current output directory. It actually
converts it relative to the process's current working directory.
So it would be different depending on how you launched cmake-gui.
This commit ensures that the generated files are always the same
by starting with a full path to begin with, based on the makefile
GetCurrentOutputDirectory method.
Git's diff-tree format has no '\n'-terminated blank line at the end of
its commit message body block if there are no diff lines. Instead the
message body is terminated by '\0' and there is no diff section. Teach
CTest to parse the format in this case.
This is especially important for the Visual Studio 10
generator and its quirky current working directory
behavior.
Also, emit more information about exactly what files are
out of date when cmakeCheckStampFile returns false.
Commit 02f7cfbc (Need to remove the MAKEFLAGS when cmake starts,
2003-05-13) removed the MAKEFLAGS environment variable when CMake starts
to prevent try_compile() from inheriting "make -i". This is unnecessary
in script mode (cmake -P). Instead remove the variable only when
configuring a project.
Tru64's make(1) resolves relative paths in "include" directives with
respect to the includer. This is inconsistent with all other known make
tools. Note that this make tool treats the path literally so we cannot
use our standard FULL path code which escapes spaces. Instead qualify
the paths with $(CMAKE_BINARY_DIR) to avoid the problem.
GCC places the vtable in the object implementing the first non-pure,
non-inline virtual method. Since the symbol is not weak on Tru64, make
the location unique by putting the destructor in a single object file.
The DynamicLoader::LibPrefix and DynamicLoader::LibExtension methods
previously hard-coded the module name components for each platform. Set
them from the CMAKE_SHARED_MODULE_PREFIX and CMAKE_SHARED_MODULE_SUFFIX
CMake variables instead. This ensures consistency in a program that
uses these methods to construct the file names for its own modules.
Use 'git fetch' followed by 'git reset' to update the source tree. This
is better than 'git pull' because it can handle a rewritten upstream
branch and does not leave local modifications. After fetch, parse
FETCH_HEAD to find the merge head that 'git pull' would choose to track
the upstream branch. Then reset to the selected head.
In the normal fast-forward case the behavior remains unchanged.
However, now local modifications and commits will be erased, and
upstream rewrites are handled smoothly. This ensures that the upstream
branch is tested as expected.
Commit 67277bac (Teach ctest_update about Git submodules, 2010-05-04)
accidentally logged "git submodule update" with the prefixes "pull-out"
and "pull-err". Fix it to use "submodule-out" and "submodule-err"
instead.
The CopyFileIfDifferent, CopyFileAlways, CopyAFile and CopyADirectory
methods should always copy permissions. The special cases in which a
caller would pass copyPermissions=false should be handled at the call
site. The parameter needlessly complicates the interface and semantics
of these methods.
If there is a .bat or .cmd file used as a custom command
then the Borland Makefiles generator (specifically) requires
using the "call " syntax before the name of the .bat or .cmd
file. This fix applies to all Makefile based generators where
WindowsShell is true.
On Windows 7 the file size reported by 'stat' on a new file sometimes
reports zero even though the real size is correct. This causes our
CopyFileAlways method to falsely detect copy failure. Work around the
problem by trusting the state of ofstream after writing the file.
Commit 0fafdb7e (Do not copy permissions of files when making the copy
in an install rule, 2008-12-18) added special behavior to KWSys file
copy methods for this special case. Use a local solution to avoid use
of the special behavior so it can be removed later.
Commit 8d0161c8 (Trust umask for file permissions, 2010-01-12) taught
these commands to set permissions to 0666 explicitly. The intention was
to let the open() call inside ofstream handle permsisions so that umask
would be honored. Now we set permissions only when we need to preserve
those on an existing file. New files will be created with umask-based
permissions.
The LINK_FLAGS property is defined only for targets that really link.
These include executables and shared libraries. For static libraries we
define the STATIC_LIBRARY_FLAGS property. Teach the Xcode generator to
make this distinction.
Improve FILE(DOWNLOAD ...):
- Add percent complete progress output to the FILE DOWNLOAD
command. This progress output is off by default to
preserve existing behavior. To turn it on, pass
SHOW_PROGRESS as an argument.
- Add EXPECTED_MD5 argument. Verify that the downloaded
file has the expected md5 sum after download is complete.
- Add documentation for SHOW_PROGRESS and EXPECTED_MD5.
When the destination file exists already and has the
expected md5 sum, then do not bother re-downloading
the file. ("Short circuit" return.)
Also, add a test that checks for the status output
indicating that the short circuit behavior is actually
occurring. Use a binary file for the test so that the
md5 sum is guaranteed to be the same on all platforms
regardless of "shifting text file line ending" issues.
Improve ExternalProject:
- Add argument URL_MD5.
- Add verify step that compares md5 sum of .tar.gz file
before extracting it.
- Add md5 check to download step, too, to prevent
unnecessary downloads.
- Emit a warning message when a file is not verified.
Indicate that the file may be corrupt or that no
checksum was specified.
Only generate .filters files if they are different than the last time
they were generated. This should prevent the unnecessary reloads
being triggered with Visual Studio 2010 builds.
kFreeBSD and Hurd have the same userland as Linux. This change is
necessary to enable kwsysProcessKill() to kill child processes on
kFreeBSD. The bug was detected by CTestTestTimeout test.
Patch from "Modestas Vainius <modestas@vainius.eu>".
See issue #10432.
This is #10466. It didn't crash for me, but also didn't work.
The issue was that a line ending with something else than a # was considered as the
end of the documentation block. If there was simply the end of the file we didn't
get into the correct branch.
Alex
Add the <Email>...</Email> element in Update.xml for each commit
reported. This field was defined by Dart but never really used.
Distributed version control systems use author name and email
instead of a user id, so now it makes sense to use this field.
The expectation of users of the MSVC60, MSVC70, MSVC71, MSVC80, MSVC90
and the new MSVC10 variables is that at most one of them will be set
for any given build tree. This change enforces that expectation for
build trees using Makefile generators. It also fixes the one mismatch
in that expectation to be found in the Visual Studio generator world:
previously, the VS 7.1 generator would set *both* MSVC70 and MSVC71;
now, it only sets MSVC71.
With these changes, user expectations are now met, and the recently
introduced CheckCompilerRelatedVariables test should pass everywhere.
Since commit "Switch to using libarchive from libtar" (2009-10-30) the
the implementation of "tar xz" has printed all paths from the tarball as
a single line with no separator. This fixes the logic to extract
silently as expected.
Git does not automatically checkout the matching version of a submodule
when it checks out a new version of the parent project in the work tree.
If the submodule reference changed in the parent project then we were
reporting the submodule path as a local modification. Work around the
problem in ctest_update using "git submodule update" after "git pull".
For projects with no submodules this is a no-op. See issue #10662.
Also add a submodule to the test project for CTest.UpdateGIT to test the
work-around.
The PDB file name for VCLinkerTool is specified by the xml attribute
"ProgramDatabaseFile", not "ProgramDataBaseFile" (note the lower-case
character 'b'). VS seems to cope with the incorrect capitalization but
the combination of VS 7.1 and Incredibuild does not. See issue #10614.
Report in <UpdateReturnStatus> when the update command line returns
non-zero. Otherwise the failure may be silently ignored since the error
was previously recorded only in the local log file.
These were implementation details of the unused methods
cmMakefile::RegisterData
cmMakefile::LookupData
We simply remove the methods, members, and class cmData.
For builds from Git repositories, add "-g<commit>" to the end of the
version number. If the source tree is modified, append "-dirty".
For builds from CVS checkouts, add "-cvs-<branch>".
Add the [.tweak] version component throughout the policy implementation.
Document all components for the cmake_policy(VERSION) command. Record
the tweak level in which each policy was introduced (0 for all current
policies). In generated documentation we report the tweak level only if
it is not zero. This preserves existing documentation.
The command now accepts four version components in the format
major[.minor[.patch[.tweak]]]
This corresponds to the new versioning scheme introduced recently.
Prepare to switch to the workflow described by "git help workflows". In
this workflow, the "master" branch is always used to integrate topics
ready for release. Brand new work merges into a "next" branch instead.
We need a new versioning scheme to work this way because the version on
"master" must always increase.
We no longer use an even/odd minor number to distinguish releases from
development versions. Since we still support cvs checkout of our source
tree we cannot depend on "git describe" to compute a version number
based on the history graph. We can use the CCYYMMDD nightly date stamp
to get a monotonically increasing version component.
The new version format is "major.minor.patch.(tweak|date)". Releases
use a tweak level in the half-open range [0,20000000), which is smaller
than any current or future date. For tweak=0 we do not show the tweak
component, leaving the format "major.minor.patch" for most releases.
Development versions use date=CCYYMMDD for the tweak level. The
major.minor.patch part of development versions on "master" always
matches the most recent release.
For example, a first-parent traversal of "master" might see
v2.8.1 2.8.1.20100422 v2.8.2
| | |
----o----o----o----o----o----o----o----o----
Since the date appears in the tweak component, the next release can
increment the patch level (or any more significant component) to be
greater than any version leading to it. Topic branches not ready for
release are published only on "next" so we know that all versions on
master lead between two releases.
Commit "Support more special characters in file(STRINGS)" (2009-10-06)
attempted to support parsing strings from binaries produced by the
Portland Group Fortran compiler. The compiler seems to put an extra
byte just at the end of its string literals. Previously we dealt with
this by explicitly enumerating bytes known to occur, but it seems that
many such possibilities exist. Now we support extraction of strings
that end in any non-ASCII character.
The SaveRestoreEnvironment helper object makes sure that the
original environment is restored immediately after the
StartProcess call returns rather than waiting for the end
of the test. When tests are executed in parallel, there is
no guarantee about the ordering of EndTest calls relative
to StartTest calls. In fact, it would be odd for them to
be nested nicely. Therefore, to avoid the corruption of
the calling ctest's environment, the original environment
must be restored before ForkProcess returns.
Detect the runtime linker's search path and add to the compile time
linker's search path. This is needed because OpenBSD's static linker
does not search for shared library dependencies in the same places as
the runtime linker.
Teach kwsysProcessKill to identify processes on this platform using the "ps"
command just as on Linux. Patch from Modestas Vainius <modax@debian.org>.
See issue #10432.
The compiler id is checked for C++ and C, if there is not one
of those available, then just default to gcc. This makes it
work with Fortran, or None projects.
This makes the behavior of the build with the Visual Studio generators
equivalent to the behavior of makefile based builds. After an error
in a custom command sequence, the build stops and reports an error
rather than executing the remaining commands in the sequence.
Create platform variable "CMAKE_<LANG>_RESPONSE_FILE_LINK_FLAG" to
specify an alternative to "@" for referencing response files. It
applies specifically to response files with linker options.
See issue #10401.
Response files are parsed by tools, not by shells. We teach
cmLocalGenerator::Convert() a new "RESPONSE" output format and use it
for objects listed in response files. It does not do special slash or
MSYS root translation like the "SHELL" format does. This is necessary
for GNU tools on Windows to understand response file content.
See issue #10401.
Allow the user to set the CMake variable CTEST_COST_DATA_FILE, which will be used to store the cost data from test runs. If not set, defaults to the original location in the build tree Testing/Temporary dir.
Ensure that the HTML documentation generated by CMake complies with
"XHTML 1.0 Strict":
- All tags are properly closed and DOCTYPE is specified
- Useful for downstream XML-processors (e.g. for extracting section
titles)
See issue #10338.
Signed-off-by: Simon Harvey <simon.harvey@cambridgeflowsolutions.com>
http://public.kitware.com/Bug/view.php?id=9978
Now instead of one linked resource for each project() just one linked
resource to the top level source directory is created.
This should really avoid this type of name clashes. And to me it looks also
much less confusing.
Hopefully the name "[Source directory]" containing a space and square
brackets doesn't lead to problems somewhere. Here it works.
Alex
In commit 'Create KWSYS_PLATFORM_INFO_TEST macro' (2009-11-20) we
implemented the macro to use a cache entry to avoid re-running the
try_compile(). However, the output copied from the try_compile is
needed on every configure. If the user wipes out the build tree but not
the cache file then the try_compile() will not re-run to recreate the
needed file. We address the problem by teaching the macro to run the
try_compile() whenever its output file does not exist.
We store custom command rule hashes in CMakeFiles/CMakeRuleHashes.txt
persistently across CMake runs. When the rule hash changes we delete
the custom command output file and write a new hash into the persistence
file.
This functionality was first added by the commit 'Introduce "rule
hashes" to help rebuild files when rules change.' (2008-06-02).
However, the implementation in cmGlobalGenerator::CheckRuleHashes kept
the file open for read when attempting to rewrite a new file. On
Windows filesystems this prevented the new version of the file from
being written! This caused the first set of rule hashes to be used
forever within a build tree, meaning that all custom commands whose
rules changed would be rebuilt every time CMake regenerated the build
tree.
In this commit we address the problem by splitting the read and write
operations into separate methods. This ensures that the input stream is
closed before the output stream opens the file.
We use 'git diff-index' to detect local modifications after pull. On
some filesystems the work tree timestamps of a few files may be dated
after the index, making them appear as locally modified. We address the
problem by using 'git update-index --refresh' to refresh the index and
avoid false local modifications.
Our internal path processing methods assume no trailing slashes, but bzr
adds trailing slashes to updated directories. This can lead to empty
entries in Update.xml files. We address the problem by stripping the
slashes as soon as they are parsed.
Brad King
KWSys Robot
Kai Wasserbäch
Bill Hoffman
David Cole
Zach Mullen
David Genest
Christoph Watzl
Clinton Stimpson
Alex Neundorf
Ruben Van Boxem
Dave Partyka
Chuck Atkins
Pat Marion
Simon Harvey