Revert commit v3.6.0-rc1~160^2 (try_compile: Honor
CMAKE_<LANG>_FLAGS_<CONFIG> changes, 2016-04-11). The behavior it
introduced can break projects that depend on the lack of such behavior.
We will have to introduce a policy or other mechanism to enable the
behavior in a compatible way. Simply revert it for now.
See issue #16174.
Even in relatively small projects using `--trace` (and `--trace-expand`)
may produce a lot of output. When developing a custom module usually
one is interested in output of only a few particular modules.
Add a `--trace-source=<file>` option to enable tracing only a subset of
source files. The final output would be only from requested modules,
ignoring anything else not matched to given filename(s).
Create a LINK_WHAT_YOU_USE target property and corresponding
CMAKE_LINK_WHAT_YOU_USE variable to enable this behavior.
Extend link commands by running `ldd -u -r` to detect shared
libraries that are linked but not needed.
The makefile is only used when called by the cmMessageCommand, so inline
the use of it there. It otherwise creates an undesirable dependency on
cmMakefile for issuing messages in the cmake instance, a violation of
the Interface Segregation Principle.
https://en.wikipedia.org/wiki/Interface_segregation_principle
This also makes it more explicit that the variable definitions only
affect the message() command. If an AUTHOR_WARNING is issued for any
other reason, it is not affected. To affect that, it is necessary to
set the cache variable instead of the regular variable.
This is an unfortunate interface quirk, but one which can't be fixed
easily now.
Add a ``FIND_LIBRARY_USE_LIB32_PATHS`` global property analogous to the
``FIND_LIBRARY_USE_LIB64_PATHS`` property. This helps find commands on
multilib systems that use ``lib32`` directories and either do not have
``lib`` symlinks or point ``lib`` to ``lib64``.
After finding it in `foo.Framework/Headers/dir/header.h`, we should
report the `foo.Framework/Headers` directory, not
`foo.Framework/Headers/dir`, because the former is what actually
contains the path the caller wishes to include.
Policy CMP0026 deprecated the LOCATION property, and we have long
provided a $<TARGET_FILE:...> generator expression. However, if
a project tries to use $<TARGET_PROPERTY:...,LOCATION> we should
at least not crash.
The compatibility implementation of the LOCATION property uses
cmGlobalGenerator::CreateGenerationObjects to create the structures
needed to evaluate the property before generation starts. The
implementation assumed that accessing the property could only be done
during configuration (via the typical get_property command use case).
The $<TARGET_PROPERTY:...,LOCATION> genex causes the LOCATION property
to be accessed during generation. Calling CreateGenerationObjects
during generation blows away all the objects currently being used for
generation and is not safe. Add a condition to call it only when
configuration is not finished.
Add a `CMAKE_TRY_COMPILE_PLATFORM_VARIABLES` variable to specify a list
of custom variables to be forwarded to a `try_compile` test project.
This will be useful for platform information modules or toolchain files
to forward some platform-specific set of variables from the host project
(perhaps set in its cache) to the test project so that it can build the
same way.
This patch preserves backward compatibility of
deb package names with previous CMake versions
but similarly to CPack/RPM allows to change
package name format and supports DEB-DEFAULT
setting that produces proper Debian package names.
eb076692 Tests: Select RunCMake.Ninja test cases based on ninja version
8a862a4d Ninja: Support embedding of CMake as subninja project
038e7716 Ninja: Pass all build paths through a central method
7c26a6a2 Ninja: Fix path to soname-d target file
ac3cdd9a Ninja: Convert object file names to ninja paths earlier
d4381cb1 Ninja: Convert link library file names like all other output paths
0397c92a Ninja: Pre-compute "CMakeCache.txt" build target name
3b3ecdfa Ninja: Pre-compute "all" build target name
5ca72750 Ninja: Simplify generation of custom target logical path
Even though the `file(GLOB)` documentation specifically warns against
using it to collect a list of source files, projects often do it anyway.
Since it uses `readdir()`, the list of files will be unsorted.
This list is often passed directly to add_executable / add_library.
Linking binaries with an unsorted list will make it unreproducible,
which means that the produced binary will differ depending on the
unpredictable `readdir()` order.
To solve those reproducibility issues in a lot of programs (which don't
explicitly `list(SORT)` the list manually), sort the resulting list of
the `file(GLOB)` command.
A more detailed rationale about reproducible builds is available
[here](https://reproducible-builds.org/).
Add a `CMAKE_NINJA_OUTPUT_PATH_PREFIX` variable. When it is set, CMake
generates a `build.ninja` file suitable for embedding into another ninja
project potentially generated by an alien generator.
Run the `Utilities/Scripts/clang-format.bash` script to update
all our C++ code to a new style defined by `.clang-format`.
Use `clang-format` version 3.8.
* If you reached this commit for a line in `git blame`, re-run the blame
operation starting at the parent of this commit to see older history
for the content.
* See the parent commit for instructions to rebase a change across this
style transition commit.
Packagers may now set their own rpm package
file names or request that rpmbuild tool
chooses one for them. It also supports handing
of situations where one spec file may produce
multiple rpm packages.
Since commit v3.3.0-rc1~430^2 (Teach find_(library|file|path) to get
prefixes from PATH, 2015-02-18) we search in <prefix>/include and
<prefix>/lib directories for prefixes with bin directories in the PATH
environment variable. The motivation was to support MSYS, MinGW and
similar Windows platforms in their default environments automatically.
At the time this behavior was thought to be worthwhile in general.
Suggested-by: Chuck Atkins <chuck.atkins@kitware.com>
Teach the `add_custom_command` and `add_custom_target' commands to
substitute argv0 with the crosscompiling emulator if it is a target with
the `CROSSCOMPILING_EMULATOR` property set.
A `$<TARGET_FILE:tgt>` generator expression does not cause insertion of
the emulator. Add a test covering this. While at it, extend the test
case to cover executables in a subdirectory. Also make the test
matching expressions more robust to support multiple add_test calls
without mixing them while matching.
e1c77472 Format include directive blocks and ordering with clang-format
180538c7 Source: Stabilize include order
0e7bca92 Utilities/Release: Stabilize include order in WiX custom action
eb817be0 Tests: Stabilize include order in MFC, VSXaml, and VSWinStorePhone
eda313b4 Tests: Stabilize include order in StringFileTest
7110b754 CursesDialog: add missing cmState include
d7a5f255 Modules: Remove unused CMakeTestWatcomVersion.c file
Sort include directives within each block (separated by a blank line) in
lexicographic order (except to prioritize `sys/types.h` first). First
run `clang-format` with the config file:
---
SortIncludes: false
...
Commit the result temporarily. Then run `clang-format` again with:
---
SortIncludes: true
IncludeCategories:
- Regex: 'sys/types.h'
Priority: -1
...
Commit the result temporarily. Start a new branch and cherry-pick the
second commit. Manually resolve conflicts to preserve indentation of
re-ordered includes. This cleans up the include ordering without
changing any other style.
Use the following command to run `clang-format`:
$ git ls-files -z -- \
'*.c' '*.cc' '*.cpp' '*.cxx' '*.h' '*.hh' '*.hpp' '*.hxx' |
egrep -z -v '(Lexer|Parser|ParserHelper)\.' |
egrep -z -v '^Source/cm_sha2' |
egrep -z -v '^Source/(kwsys|CursesDialog/form)/' |
egrep -z -v '^Utilities/(KW|cm).*/' |
egrep -z -v '^Tests/Module/GenerateExportHeader' |
egrep -z -v '^Tests/RunCMake/CommandLine/cmake_depends/test_UTF-16LE.h' |
xargs -0 clang-format -i
This selects source files that do not come from a third-party.
Inspired-by: Daniel Pfeifer <daniel@pfeifer-mail.de>
Since commit v3.4.0-rc1~321^2~2 (Genex: Store a backtrace, not a pointer
to one, 2015-07-08) we treat cmListFileBacktrace instances as
lightweight values. This was true at the time only because the
backtrace information was kept in the cmState snapshot hierarchy.
However, that forced us to accumulate a lot of otherwise short-lived
snapshots just to have the backtrace fields available for reference by
cmListFileBacktrace instances. Recent refactoring made backtrace
instances independent of the snapshot hierarchy to avoid accumulating
short-lived snapshots. This came at the cost of making backtrace values
heavy again, leading to lots of string coying and slower execution.
Fix this by refactoring cmListFileBacktrace to provide value semantics
with efficient shared storage underneath. Teach cmMakefile to maintain
its call stack using an instance of cmListFileBacktrace. This approach
allows the current backtrace to be efficiently saved whenever it is
needed.
Also teach cmListFileBacktrace the notion of a file-level scope. This
is useful for messages about the whole file (e.g. during parsing) that
are not specific to any line within it. Push the CMakeLists.txt scope
for each directory and never pop it. This ensures that we always have
some context information and simplifies cmMakefile::IssueMessage.
Push/pop a file-level scope as each included file is processed. This
supersedes cmParseFileScope and improves diagnostic message context
information in a few places. Fix the corresponding test cases to expect
the improved output.
Create a <LANG>_CLANG_TIDY target property (initialized by a
CMAKE_<LANG>_CLANG_TIDY variable) to specify a clang-tidy command line
to be run along with the compiler.
In the `try_compile` source file signature we propagate the caller's
value of `CMAKE_<LANG>_FLAGS` into the test project. Extend this to
propagate `CMAKE_<LANG>_FLAGS_<CONFIG>` too instead of always using the
default value in the test project. This will be useful, for example, to
allow the MSVC runtime library to be changed (e.g. `-MDd` => `-MTd`).
The Custom-Symbolic-and-Byproduct case fails strangely on some
filesystems used by our nightly testing. Somehow on the first build the
`use-byproduct` output ends up with a timestamp older than
`gen-byproduct-stamp` even though the build log clearly shows them build
in the correct order (and must according to build system dependencies).
Work around this problem by adding an extra delay before building
`use-byproduct`.
Tested-by: Gerhard Grimm <gerhard.grimm@detec.com>
The change in commit v3.5.0-rc1~198^2 (Ninja: Always re-run custom
commands that have symbolic dependencies, 2015-11-19) broke the
byproducts feature added by commit v3.2.0-rc1~340^2~2 (Add an option for
explicit BYPRODUCTS of custom commands, 2014-11-13) when SYMBOLIC
outputs also appear. This case occurs with AUTORCC-generated custom
targets because the output is SYMBOLIC (to always run) and the generated
file is a byproduct (for restat so dependents do not run unnecessarily).
The two use cases conflict because Ninja does not support per-output
restat. Favor restat whenever byproducts are present because it is
required for byproducts to work correctly. In use cases where we want
an always-run chain we simply will not be able to also use byproducts.
b06e17da Help: Add notes for topic 'cmake-depend-in-project-only'
52540245 Tests: Add test for CMAKE_DEPENDS_IN_PROJECT_ONLY variable
b1e1aa1e Makefile: Optionally scan only source and build trees for dependencies
Brad King
Domen Vrankar
Alex Turbov
Bill Hoffman
Stephen Kelly
Daniel Scharrer
Harry Mallon
Reiner Herrmann
Nicolas Despres
Kitware Robot
Rolf Eike Beer
Jean-Christophe Fillion-Robin
Daniel Pfeifer