Unlike other target properties, this does not have a corresponding
non-INTERFACE variant.
This allows propagation of system attribute on include directories
from link dependents.
3e30d9e TLL: Don't populate old link interface if CMP0022 is NEW.
574fec9 Export: Generate INTERFACE_LINK_LIBRARIES property on targets.
d0a76ea Introduce the INTERFACE_LINK_LIBRARIES property.
ddde61c Introduce the LINK_ONLY generator expression.
5aa9731 GenexEval: Add abstracted access to link interface for a target.
When the COPY_FILE operation fails optionally capture the error message
with a COPY_FILE_ERROR option instead of reporting the error
immediately. This gives callers a chance to do something else or report
the error.
Teach the RunCMake.try_compile test to cover bad argument combinations
involving COPY_FILE_ERROR. Teach the TryCompile test to cover the case
of a COPY_FILE error message captured by COPY_FILE_ERROR.
If CMAKE_<lang>_FLAGS contains quotes or other CMake language characters
they must be escaped when written into the generated CMakeLists.txt file
so that the test project parses them properly.
Teach the TryCompile test to cover this case by adding a flag with
quotes into CMAKE_C_FLAGS during a C language try_compile.
Use preprocessor loops and add a unit test for the appropriate
policies. All policies whose value is recorded at target creation
time should be part of this list.
When CMake reports failure to configure a project, especially when the
toolchain does not initialize properly, the true reason may be clear
from reading the CMakeFiles/CMake(Output|Error).log files. Advise users
to look at these files if they exist when configuration fails.
Add RunCMake.Configure test to check that the log files are mentioned
when configuration fails.
Always populate the INTERFACE_LINK_LIBRARIES for interface
entries. Don't populate the old interface properties
matching (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?
if CMP0022 is NEW.
Because the INTERFACE_LINK_LIBRARIES property is now populated by
the target_link_libraries when operating on a static library,
make an equivalent change which populates the property with
the same value when the old link_libraries() command is used. This
silences the policy warning in that case.
This property is generated only for targets which have recorded
policy CMP0022 as NEW, and a compatibility mode is added to
additionally export the old interfaces in that case too.
If the old interfaces are not exported, the generated export files
require CMake 2.8.12. Because the unit tests use a version which
is not yet called 2.8.12, temporarily require a lower version.
This property replaces the properties which
match (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?, and is enabled
for IMPORTED targets, and for non-IMPORTED targets only with a policy.
For static libraries, the INTERFACE_LINK_LIBRARIES property is
also used as the source of transitive usage requirements content.
Static libraries still require users to link to all entries in
their LINK_LIBRARIES, but usage requirements such as INCLUDE_DIRECTORIES
COMPILE_DEFINITIONS and COMPILE_OPTIONS can be restricted to only
certain interface libraries.
Because the INTERFACE_LINK_LIBRARIES property is populated unconditionally,
we need to compare the evaluated result of it with the link implementation
to determine whether to issue the policy warning for static libraries. For
shared libraries, the policy warning is issued if the contents of
the INTERFACE_LINK_LIBRARIES property differs from the contents of the
relevant config-specific old LINK_INTERFACE_LIBRARIES property.
If a non-IMPORTED library is added to the INTERFACE_LINK_LIBRARIES
of a IMPORTED target, the non-IMPORTED target needs to become a
target dependency and link dependency of the consuming target.
This is already the case since commit 30962029 (Make targets depend
on the link interface of their dependees, 2012-12-26), and fixed in
the parent commit, so test that it works.
9a76d83 VS12: Find proper MSBuild for VSProjectInSubdir test
4e5cb39 Merge branch 'master' into vs12-generator
78fdbbc FindBoost: Add -vc120 mangling for VS 12
e99d7b1 VS12: Generate flag tables from MSBuild v120 tool files
77ac9b8 VS12: Add Visual Studio 12 generator (#14251)
539356f Ninja: Custom Command file depends don't need to exist before building
874e171 Ninja: GlobalNinjaGenerator WriteBuild and WritePhonyBuild non static
88d27ad Add a test to expose a bug with add_custom_command and ninja.
If the CTest make program is not msbuild we find the msbuild
corresponding to the current test generator. In the case of
VS 12 search for the msbuild it provides.
Copy cmGlobalVisualStudio11Generator to cmGlobalVisualStudio12Generator
and update version numbers accordingly. Add the VS12 enumeration value.
Add module CMakeVS12FindMake to find MSBuild. Look for MSBuild in its
now-dedicated Windows Registry entry. Teach the platform module
Windows-MSVC to set MSVC12 and document the variable. Teach module
InstallRequiredSystemLibraries to look for the VS 12 runtime libraries.
Teach tests CheckCompilerRelatedVariables, Preprocess, VSExternalInclude,
and RunCMake.GeneratorToolset to treat VS 12 as they do VS 10 and 11.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
In my project group we are using CMake to generate c++/cli winform
projects and I noticed the work done in commit 79ec7868 (VS: Add Windows
Forms Support, 2013-04-29) was in the right direction for solving some
of the problems we were facing.
The changes as submitted was breaking some functionality in our
projects, so I made some changes that fixes our problems and I believe
that it will also work for others.
* Resx files did not link correctly with the winform h-file so I added
the Resx configuration to the vcxproj file.
* I removed the functionality for setting <CLRSupport> true for the
project based on if an resx-file is pressent. This is preventing
us from using native cpp code. Also this do not address that some
projects will need to set other options like clr:pure, clr:safe.
This could be implemented as a cmake option, so it is possible to
specify exactly what is needed. Existing VSWindowsFormsResx Test
project is updated so it will be working with my changes.
Factor appending of individual flags out into an AppendFlagEscape method
in cmLocalGenerator and teach it to use EscapeForShell. Update all
COMPILE_OPTIONS handling to use AppendFlagEscape.
Override the method in the Xcode generator to use its custom escape
implementation.
Teach the CompileOptions test to add an option that requires escaping
everywhere instead of just with the GNU tools.
ff015ee Genex: Report error if a target file is needed to evaluate link libraries.
b58aff9 Genex: Extend EvaluatingLinkLibraries to also check the top target name.
b1c19ce Genex: Make LINK_LANGUAGE report an error when evaluating link libraries.
0e1cb07 Add missing return after error report.
Expose the internal system information API to the CMake language. For
example, it is useful to see how much memory the system has available to
estimate an upper limit of tests that can run in parallel.
Even with the NMake Makefiles generator, it is not able to properly
clean up after the test.
http://open.cdash.org/testDetails.php?test=193424220&build=2934501
Internal cmake changing into directory: C:/Dashboards/My Tests/CMake-nmake10-x64-continuous/Tests/WarnUnusedCliUnused
Error: cmake execution failed
CMake Error: Error: generator : NMake Makefiles
Does not match the generator used previously: Visual Studio 10
Either remove the CMakeCache.txt file or choose a different binary directory.
Extend the signature
try_compile(RESULT_VAR <bindir> <srcfile> ...)
to allow multiple sources as
try_compile(RESULT_VAR <bindir> SOURCES <srcfile>... ...)
Process the sources to generate a CMakeLists.txt that enables all needed
languages.
Teach the TryCompile test to try cases with two sources of the same
language and of mixed languages. Teach RunCMake.try_compile to cover
error cases for the signature.
If the expression $<TARGET_PROPERTY:prop> appears in the content
of a target property, the target that prop is read from is
the 'head target' of the expression. In contexts such as evaluating
the content of a target property during generation, such
as INCLUDE_DIRECTORIES, the 'head target' is the one on which the
initial request was made.
If evaluating a generator expression which is not a target property
content, the target must be explicitly specified. Such contexts
include add_custom_command and file(GENERATE). The content might
then look like
$<TARGET_PROPERTY:tgt,prop>
However, as there is no HeadTarget set, any generator expressions
evaluated as part of reading prop from tgt which do not specify
the tgt directly report an error.
Modify the logic of the TARGET_PROPERTY generator expression so
that in such contexts, the 'head target' is set to the appropriate
target which was first encountered.
It is common to specify a CMAKE_TOOLCHAIN_FILE and get a warning
for using it despite it not being used.
The WarnUnusedCliUnused test relies on the warning being emitted
each time cmake is run on an existing build. That behavior is changed
by this patch to warn only on the first invokation of CMake, and not
on subsequent invokations (because the variable is in the cache with
the same value). For that test, a clean target is added which clears
the cache and cause the warning to be emitted each time.
As the Ninja generator does not support the feature needed to test
this, it is not tested with that generator.
This command is similar to add_definitions, in that it affects
the compile options of all targets which follow it. The implementation
is similar to the implementation of the include_directories command,
in that it is based on populating a COMPILE_OPTIONS directory property
and using that to initialize the same property on targets.
Unlike the include_directories command however, the add_compile_options
command does not affect previously defined targets. That is, in
the following code, foo will not be compiled with -Wall, but bar
will be:
add_library(foo ...)
add_compile_options(-Wall)
add_library(bar ...)
Use makefile->IssueMessage() to print the unprocessed watch message in a
format consistent with other CMake messages and with a more complete
call stack for the access.
When a watch does not specify a command to call then variable_watch
prints out a message to stderr. Remove code after that which collects
all variable values to construct a message that is never printed.
Otherwise such code causes a READ_ACCESS watch to trigger on all
variables in the currents scope.
Reported-by: Yichao Yu <yyc1992@gmail.com>
Checkout [1] as an example of the test failures. In that particular cases, the
failures is caused by the plus sign in the path being pass unescaped
(buildd-cmake_2.8.9-1~bpo60+1-armel-3Lvkef) to the regexp.
In addition to failures in the log, the following new tests also fail in 2.8.11:
243 - CTestTestMemcheckUnknown (Failed)
244 - CTestTestMemcheckUnknownQuoted (Failed)
248 - CTestTestMemcheckDummyValgrindFailPre (Failed)
249 - CTestTestMemcheckDummyValgrindFailPost (Failed)
250 - CTestTestMemcheckDummyPurify (Failed)
251 - CTestTestMemcheckDummyBC (Failed)
253 - CMake.List (Failed)
[1] https://buildd.debian.org/status/fetch.php?pkg=cmake&arch=armel&ver=2.8.9-1~bpo60%2B1&stamp=1369243896
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
This fixes bug #13797.
The kinds of changes applied in 373faae5 for frameworks are now
applied to CFBundle. The prefix and suffix for CFBundles are
now handled in cmTarget::GetFullNameInternal.
That will allow things like this:
find_package(Qt4)
qt4_generate_moc(myfile.h moc_myfile.cpp TARGET foo) # Note, foo target doesn't
# exist until below.
add_library(foo ...)
The qt4_generate_moc call would use the INCLUDE_DIRECTORIES from
the foo target using generator expressions. Currently it reads
the INCLUDE_DIRECTORIES directory property, meaning that include_directories()
is required.
Support for the TARGET is also added to qt4_wrap_cpp, but not qt4_automoc,
as that is deprecated in favor of the AUTOMOC target property.
The moc tool reports failure if the Q_INTERFACES macro is used with
an argument which has not appeared with Q_DECLARE_INTERFACE, so that is
the basis of the unit test.
The command line arguments are now always written to a file, which is
passed to moc as the @atfile. This was already the case on Windows, but
now it is used everywhere. The reason for that is that it is not currently
possible to expand the list of includes from a target directly in
a add_custom_command invokation (though that may become possible in the
future). There is not a big disadvantage to using the file anyway on
unix, so having one code path instead of two is also a motivation.
This corresponds to the g++ and clang++
option -fvisibility-inlines-hidden on linux. On Windows with MinGW,
this corresponds to -fno-keep-inline-dllexport. That option is
not supported by clang currently.
This is initialized by CMAKE_<LANG>_VISIBILITY_PRESET. The target
property is used as the operand to the -fvisibility= compile option
with GNU compilers and clang.
Process all arguments in a single loop using a simple state machine.
While at it, fix some error message typos. Also allow LINK_LIBRARIES
with no actual libraries to disable use of the -DLINK_LIBRARIES=...
from the CMAKE_FLAGS. This was already possible in the old logic if
LINK_LIBRARIES was immediately followed by another keyword argument
instead of the end of the argument list, so allow it in general.
Update the RunCMake.try_compile test cases accordingly.
7378792 if: Add test for IS_DIRECTORY
4ab10e0 Merge branch 'master' into fix-FileIsDirectory-SEGV
045d6ae KWSys: Fix SystemTools::FileIsDirectory with long paths (#14176)
Add a RunCMake.if test to cover if() command behavior. Start with a
test for IS_DIRECTORY cases with an existing directory and a long path,
both with a trailing slash.
In Qt 5.1, Qt5::Core has a INTERFACE_QT_MAJOR_VERSION property
of '5', and since CMake 2.8.11, Qt4::QtCore has an
INTERFACE_QT_MAJOR_VERSION of '4'. This was introduced in
commit 4aa10cd6 (FindQt4: Set the INTERFACE_QT_MAJOR_VERSION for
Qt4::QtCore, 2013-03-16), to produce an error if Qt 4 and Qt 5
are erroneously used by the same target. This can also be used
however to determine the Qt major version, and therefore the
particular moc executable to use during automoc steps. This means
that targets in a single buildsystem can use a selection of Qt 4
and Qt 5, and still take advantage of the CMAKE_AUTOMOC feature
without conflicting.
The ExternalData_LINK_CONTENT option tells ExternalData to convert real
data files it finds into content links and to "stage" the original
content in a ".ExternalData_<algo>_<hash>" file. However, after a data
object has been staged it is possible that a user-provided pattern in
the "REGEX:" option will later match the staged object file. We must
not process staged object files even when a user pattern matches them.
Fix the implementation to not match a staged object file as a normal
data file for conversion. Extend the RunCMake.ExternalData test to
cover this case.
The VS 6 IDE does not like spaces in definition values so CMake drops
them and warns. The Tests/CompileDefinitions test C code that looks for
the dropped definitions already knows to skip them, but CMake still
warns. Silence the warnings by avoiding such values in the first place
on VS 6.
The variables in this module are used to configure a header file
with defines whose name depends on the name of the target.
As valid names of targets may be invalid for use as defines, convert
the names of the defines used to C identifiers first. This is already
done in C++ code for the DEFINE_SYMBOL property.
This is not as simple as ensuring that the BASE_NAME is a C identifier,
because most of the define names are configurable, and because use of
a BASE_NAME which is not a C identifier, such as 4square can become a
C identifier by specifying a prefix in the generate_export_header
macro.
They can't be used when evaluating link libraries, but they can be
used for include directories and compile definitions. Later they can
be used for compile options.
The idea is to write to a temp file which contains generator
expressions, and at generate time, evaluate the generator expressions,
and write the result to a file.
Because executables on Windows are limited in the length of command line
it is possible to use, it is common to write command line arguments to a
file instead and specify the file as a source of arguments.
This new FILE(GENERATE) subcommand allows the use of generator
expressions to create such files so that they can be used with
add_custom_command for example.
Make handling of directory separators consistent between
non-bundle and bundle code.
Remove xcode specific flag from cmTarget when getting install_name.
Add (more) consistent convenience functions in cmTarget to get
directories inside of bundles and frameworks to add files to.
This refactor also fixes bug #12263 where frameworks
had the wrong install name when SKIP_BUILD_RPATH.
Also make install_name for frameworks consistent between Makefile
and Xcode generator.
The parent commit added a empty_entry_test shared library to the
IncludeDirectories test. Some toolchains fail to create a shared
library with no user-defined symbols, so provide a dummy symbol.
Stephen Kelly
Clinton Stimpson
Brad King
Jonas Andersen
Robert Maynard
Nils Gladitz
Rolf Eike Beer
Modestas Vainius