Teach cmGlobalGenerator::CheckTargets to include OBJECT_LIBRARY targets
in the check for source file existence.
Extend the RunCMake.ObjectLibrary test to cover this case.
Teach the cmGeneratorExpressionEvaluator filesystem artifact logic
to reject OBJECT_LIBRARY targets since they have no main artifact.
Without the explicit rejection evaluation falls through to an
internal CMake error message in cmTarget::GetOutputInfo.
Extend the RunCMake.GeneratorExpression test to cover these cases.
In certain scenarios, it is preferable to keep a 'dirty' install prefix
than to clear it, and to expect that content will not be found there.
Add a CMAKE_FIND_NO_INSTALL_PREFIX variable that can be set to disable
searching the install prefix.
Bracket arguments recorded in command invocations inside foreach,
function, and macro blocks should not have any replacements done when
the arguments are replayed later. Teach the RunCMake.Syntax test to
cover these cases.
Add an Escape1 test case covering \-escape cases inside bracket, quoted,
and unquoted arguments. Also cover comments immediately after quoted
and unquoted arguments on lines containing \# escapes.
3e04946 Require CMAKE_<LANG>_COMPILER to be found as a full path
6007f7c CMakeDetermineCompilerId: Always use compiler detected from IDE
332771c CMakeDetermine*Compiler: Remove temporary cache entry
All generators now support detection of the full path to the compiler, so
require it to be so. This will allow CMake<LANG>Information.cmake and
other logic to assume the full path to the compiler tool is available.
The Makefile generators already rejected CMAKE_<LANG>_COMPILER values
that did not name an existing compiler. Extend this error message to
all generators, make it occur as early as possible, and improve the
message with advice about how to set the compiler. If the full path to
the compiler is not known, finish enabling languages with a fatal error
so configuration does not continue.
For now, allow the RC language compiler to not be a full path. Later we
will need to detect the full path to "rc" under the VS IDE.
Add a RunCMake.CompilerNotFound test to cover failure cases.
Fix the RunCMake.CompilerChange test EmptyCompiler case to work
when configuration does not continue past enable_language.
Only valid target names or generator expressions may appear in
the target field of a LINK_ONLY expression.
Other content like link flags should still be added to that property
(wrapped in config-specific generator expressions), but not wrapped
in LINK_ONLY. Otherwise undue warnings would be issued for the
policy CMP0022.
The LINK_ONLY expression only has an effect for actual target
names anyway, so there is no logical deficit.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
It was a subtest of the RunCMake.ObjectLibrary test. However, we need
to test a build with ExternalProject after running CMake, which RunCMake tests
do not do.
Teach the CMake language lexer to treat the \-LF pair terminating a
line ending in an odd number of backslashes inside a quoted argument
as a continuation. Drop the pair from the returned quoted argument
token text. This will allow long lines inside quoted argument
strings to be divided across multiple lines in the source file.
It will also allow quoted argument text to start on the line after
the opening quote. For example, the code:
set(x "\
...")
sets variable "x" to the value "..." with no opening newline.
Previously an odd number of backslashes at the end of a line inside
a quoted argument would put a \-LF pair (or a \-CR pair) literally
in the argument. Then the command-argument evaluator would complain
that the \-escape sequence is invalid. Therefore this syntax is
available to use without changing behavior of valid existing code.
Teach the RunCMake.Syntax test to cover cases of quoted arguments
with lines ending in \, \\, and \\\. Odd counts are continuations.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
Other warnings for the same policy already have similar output since
commit 81d2793e (Add differing target property content to policy CMP0022
warning, 2013-09-11).
Add cmCommand::Disallowed helper to check the setting of a policy that
disallows the command. Add a RunCMake.DisallowedCommands test
placeholder. Add a Help/policy/DISALLOWED_COMMAND.txt file for
inclusion by each policy document to avoid duplication of the common
text.
Add a string(CONCAT) command to simply concatenate input arguments
together. This will be useful for combining strings from different
quoting syntaxes. Add a RunCMake.string test covering these cases.
Introduce a policy to control the behavior.
The AliasTargets unit test already tests that using a
double-semicolon in the name is not an error. Change the ExportImport
test to use a namespace with a double-semicolon too.
daa0f6f Add Lua-style long brackets and long comments to CMake language
a8c6523 cmListFileLexer: Convert CRLF -> LF newlines explicitly
dbd9333 cmListFileLexer: Allow a leading UTF-8 Byte-Order-Mark (#11137)
5645783 cmListFileLexer: Allow command names with one letter (#14181)
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Read input files in binary mode instead of text mode and convert CRLF
newlines to LF newlines explicitly in our own buffer. This is necessary
to read CMake source files with CRLF newlines on platforms whose C
runtime libraries do not transform newlines in text mode. For example,
a Cygwin or Linux binary may not transform CRLF -> LF in files read from
a Windows filesystem. Perform the conversion ourselves to ensure that
multi-line string literals in CMake source files have LF newlines
everywhere.
Teach the lexer to read a UTF-8, UTF-16 BE/LE, or UTF-32 BE/LE
Byte-Order-Mark from the start of a file if any is present. Report an
error on files using UTF-16 or UTF-32 and accept a UTF-8 or missing BOM.
Teach the lexer to treat a single letter as an identifier instead of an
unquoted argument. Outside of a command invocation, the parser treats
an identifier as a command name and an unquoted argument as an error.
Inside of a command invocation, the parser treats an identifier as an
unquoted argument. Therefore this change to the lexer will make what
was previously an error case work with no other behavioral change.
The final location and name of a build-target is not determined
until generate-time. However, reading the LOCATION property from
a target is currently allowed at configure time. Apart from creating
possibly-erroneous results, this has an impact on the implementation
of cmake itself, and prevents some major cleanups from being made.
Disallow reading LOCATION from build-targets with a policy. Port some
existing uses of it in CMake itself to use the TARGET_FILE generator
expression.
Make the API for adding targets string based so that it can easily
use cmGeneratorTarget.
Teach the cmIncludeCommand to generate the exported file at
configure-time instead if it is to be include()d.
The RunCMake.ExportWithoutLanguage test now needs a dummy header.h
file as expected error from export() is now reported after the
missing file error.
f973737 GenerateExportHeader: Port to use message(DEPRECATION)
f69606d Qt4Macros: Port to use message(DEPRECATION)
509c142 message: Add a DEPRECATION mode
1763c31 Set policy CMP0025 to NEW while building CMake itself
aa53ee5 Add policy CMP0025 for Apple Clang compiler id compatibility
ab65862 Clang: Add separate "AppleClang" compiler id
By default, the message is not issued. If CMAKE_ERROR_DEPRECATED
is on, the message is fatal. If CMAKE_WARN_DEPRECATED is on, the
message is a warning.
Previously if headers required to check if a struct has a member can be
compiled with C++ compiler only, the check would fail because the C
compiler fails. As a consequence, the result variable would be set to
false, even if the struct has that particular member.
Teach CHECK_STRUCT_HAS_MEMBER to accept a new optional argument LANGUAGE
that allows one to explicitly set the compiler to use. The new
signature is therefore:
CHECK_STRUCT_HAS_MEMBER (<struct> <member> <header> <variable>
[LANGUAGE <language>])
CMake is aware of the policy's NEW behavior and the AppleClang compiler
id. Set the policy to NEW explicitly to avoid the warning and get the
NEW behavior.
Also teach the RunCMake test infrastructure to build tests with
-DCMAKE_POLICY_DEFAULT_CMP0025=NEW to avoid the policy warning
in test output that must match specific regular expressions.
Currently, export() is executed at configure-time.
One problem with this is that certain exported properties like
the link interface may not be complete at the point the export() is
encountered leading to an incorrect or incomplete exported
representation. Additionally, the generated IMPORTED_LOCATION
property may even be incorrect if commands following the export()
have an effect on it.
Another problem is that it requires the C++ implementation of cmake
to be capable of computing the exported information at configure time.
This is a limitation on the cleanup and maintenance of the code. At
some point in the future, this limitation will be dropped and more
implementation will be moved from cmTarget to cmGeneratorTarget.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
When RunCMake tests run during dynamic analysis, valgrind may add lines
of the form "==[0-9]+==..." to the output. Remove such lines from the
actual output before matching it against the expected output.
Since commit 58e52416 (Warn about arguments not separated by whitespace,
2013-02-16) we warn about arguments not separated by spaces. Loosen the
warning to not complain about left parens not separated by spaces from
the preceding token. This is common in code like "if(NOT(X))".
Teach the RunCMake.Syntax test to cover cases of left parens not
separated by spaces and check that no warning appears.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
In the future CMake will introduce Lua-style long bracket syntax.
Warn about unquoted arguments that in the future will be treated
as opening long brackets.
Teach the RunCMake.Syntax test to cover such cases and ensure that the
warning appears.
Teach the lexer to return tokens for whitespace. Teach the parser to
tolerate the space tokens where whitespace is allowed. Also teach the
parser to diagnose and warn about cases of quoted arguments followed
immediately by another argument. This was accidentally allowed
previously, so we only warn.
Update the RunCMake.Syntax test case StringNoSpace expected stderr to
include the warnings.
If a line inside a string ends in a backslash count the following
newline character as a line increment. Add a test covering this case to
verify that subsequent line numbers are correct.
Test basic unquoted and quoted argument parsing cases including failure
on an unterminated string and an unterminated command invocation. Also
cover arguments not separated by any spaces, which is accidentally
allowed by the current parser.
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
Commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced an error case for
using the install(TARGETS) command with specified INCLUDES DESTINATION,
but no specified EXPORT set.
It is convenient to use a variable to set the various destinations
for different outputs (as KDE does), and some targets such as
executables are installed but not exported. This was triggering
the error case, but as it is a common case, remove the error.
First, it prevents a NULL dereference and second it reiterates that
targets without languages are not supported by CMake.
Add a RunCMake.ExportWithoutLanguage test exporting a library without a
languages.
Add a new signature to help populate INTERFACE_LINK_LIBRARIES and
LINK_LIBRARIES cleanly in a single call. Add policy CMP0023 to control
whether the keyword signatures can be mixed with uses of the plain
signatures on the same target.
Export the INCLUDES DESTINATION without appending to the
INTERFACE_INCLUDE_DIRECTORIES of the target itself. That way, a target
can be exported multiple times with different INCLUDES DESTINATION
without unintended cross-pollution of export sets.
It accepted an optional argument to test for equality, but no way
to get the linker language of a particular target.
TARGET_PROPERTY provides this flexibility and STREQUAL provides
the necessary API for equality test.
Extend the CompileDefinitions test to cover accessing the
property of another target.
In CMakeDetermineCompilerABI we use try_compile with the COPY_FILE
option to get a copy of the compiled binary used to detect the ABI
information. We already tolerate the case when compilation fails.
However, when compilation appears to succeed but does not produce the
expected executable the try_compile command immediately reports an error
because the COPY_FILE fails.
Tolerate COPY_FILE failure without stopping the overall configuration
process by using the try_compile COPY_FILE_ERROR option to capture the
error message. Log the full error to CMakeError.log and simply report
failure to detect the ABI as if compilation had failed.
Teach the RunCMake.Configure test to cover this case and verify that the
messages show up as expected both in stdout and in CMakeError.log.
3e30d9e TLL: Don't populate old link interface if CMP0022 is NEW.
574fec9 Export: Generate INTERFACE_LINK_LIBRARIES property on targets.
d0a76ea Introduce the INTERFACE_LINK_LIBRARIES property.
ddde61c Introduce the LINK_ONLY generator expression.
5aa9731 GenexEval: Add abstracted access to link interface for a target.
Brad King
Stephen Kelly
Daniele E. Domenichelli
Ben Boeckel
Ben Boeckel