These interface-related link-libraries properties are used to determine
the value of the other INTERFACE properties, so we were getting infinite
recursion and segfaults otherwise.
6063fef Output include directories as LOG messages, not warnings.
aa66748 Specify the target whose includes are being listed.
d70204a Only output includes once after the start of 'generate-time' when debugging.
0d46e9a Store includes from the same include_directories call together.
830246e Export the COMPATIBLE_INTERFACE_BOOL content properties
bd82bb4 Clear the link information in ClearLinkMaps.
e987991 Make INTERFACE determined properties readable in generator expressions.
d9afacc Exit early if we find an inconsistent property.
1800f70 Populate the link information cache before checking dependent properties.
With similar reasoning to the parent commit, as downstreams, we can't
determine what $<CONFIG> generator expressions would be appropriate.
Upstream would have populated the INTERFACE_INCLUDE_DIRECTORIES with
config-specific generator expressions, possibly appropriate for
their DEBUG_CONFIGURATIONS. In theory, if we would add include
directories for a DEBUG intent, we would have to match the upstream
configurations for that.
Rather than attempting to discover the appropriate configurations
at this time, simplify the feature instead. The use of IMPORTED targets
with these commands could still be added in the future if targets
would export their DEBUG_CONFIGURATIONS somehow.
This reverts commit 9cfe4f1b76.
It turns out that correctly adding the content to
the IMPORTED_LINK_INTERFACE_LIBARIES_<CONFIG> of an upstream target
from the buildsystem of a downstream project is not simple.
If upstream had added the INTERFACE content, the config-specific
properties would be determined by the DEBUG_CONFIGURATIONS of
upstream.
As downstream, we don't have any information about what
the DEBUG_CONFIGURATIONS of upstream were, so we can't determine
which configuration-specific properties to populate. The best we can do
is add it to all of them or add it to the ones downstream considers to
be DEBUG_CONFIGURATIONS, neither of which is a good solution.
So, removing the porcelain API for that is the best approach. A human
can still determine which properties to populate and use
the set_property API to populate the desired properies.
Another solution to this would be for upstream targets to publish
what they consider DEBUG_CONFIGURATIONS, but that can be added in
a future release.
Otherwise, we get a separate IncludeDirectoriesEntry for each include,
and that causes unnecessary and confusing splitting in the output when
debugging the INCLUDE_DIRECTORIES property.
This new expression allows checking how a policy was set when a target
was created. That information is only recorded for a subset of policies,
so a whitelist is used.
Set CMAKE_SUPPRESS_REGENERATION in the Lib1 and Lib2 projects so that
their .vcxproj files do not contain references to ZERO_CHECK. Such
references do not make sense when using the files in another .sln file.
This does not reduce the effectiveness of the test because real projects
that use include_external_msproject will have their own .vcxproj files not
generated by CMake anyway.
The ExternalProject_Add DEPENDS option adds two types of dependencies.
It adds a target-level build order dependency between the external
project target and the named targets. It also adds a file-level
dependency on the "done" stamp file of the named external project
targets. Targets not created by ExternalProject_Add have no such stamp
file and no _EP_STAMP_DIR property. Prior to commit d14c0243 (Refactor
repeated code into function, 2012-04-26) we unconditionally accepted an
empty stamp dir and generated a dependency on a non-existent file.
After that commit we generate an error that no stamp dir is set.
Skip the file-level dependency when the named dependency is not an
external project target in order to allow this use case. Teach the
ExternalProject test to cover the case.
1d74ba2 Test evaluation target via export for generator expressions
522bdac Export the INTERFACE_PIC property.
4ee872c Make the BUILD_INTERFACE of export()ed targets work.
1d47cd9 Add a test for the interfaces in targets exported from the build tree.
6c828f9 Move the exported check for file existence.
cfd4f0a Move the exported check for dependencies of targets
d8fe1fc Only generate one check per missing target.
f623d37 Don't write a comment in the export file without the code.
b279f2b Strip consecutive semicolons when preprocessing genex strings.
The Config and IMPORTED_ variants may also contain generator
expressions.
If 'the implementation is the interface', then the result of
evaluating the expressions at generate time is used to populate
the IMPORTED_LINK_INTERFACE_LIBRARIES property.
1) In the case of non-static libraries, this is fine because the
user still has the option to populate the LINK_INTERFACE_LIBRARIES
with generator expressions if that is what is wanted.
2) In the case of static libraries, this prevents a footgun,
enforcing that the interface and the implementation are really
the same.
Otherwise, the LINK_LIBRARIES could contain a generator
expression which is evaluated with a different context at build
time, and when used as an imported target. That would mean that the
result of evaluating the INTERFACE_LINK_LIBRARIES property for
a static library would not necessarily be the 'link implementation'.
For example:
add_library(libone STATIC libone.cpp)
add_library(libtwo STATIC libtwo.cpp)
add_library(libthree STATIC libthree.cpp)
target_link_libraries(libtwo
$<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,STATIC_LIBRARY>:libone>)
target_link_libraries(libthree libtwo)
If the LINK_LIBRARIES content was simply copied to the
IMPORTED_LINK_INTERFACE_LIBRARIES, then libthree links to libone, but
executables linking to libthree will not link to libone.
3) As the 'implementation is the interface' concept is to be
deprecated in the future anyway, this should be fine.
Make a C executable instead of attempting to make a C++ static
library (and not really succeeding). This was introduced in
commit 894f52f3 (Handle INTERFACE properties transitively for
includes and defines., 2012-09-23).
3581b96 Process the INTERFACE_PIC property from linked dependencies
042ecf0 Add API to calculate link-interface-dependent bool properties or error.
bf5ece5 Keep track of properties used to determine linker libraries.
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
This makes
set(CMAKE_BUILD_INTERFACE_INCLUDES ON)
add the equivalent of
set_property(TARGET tgt APPEND PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR};${CMAKE_CURRENT_BINARY_DIR}>
)
to every target.
If the headers are in CMAKE_CURRENT_SOURCE_DIR, and the generated headers
are in CMAKE_CURRENT_BINARY_DIR, this is a convenient way to build a target
bar, which depends on foo, just by using target_link_libraries() and adding
the INTERFACE_INCLUDE_DIRECTORIES to the INCLUDE_DIRECTORIES of the target
being linked. There will be more-convenient porcelain API to consume the
property in the future.
This makes it possible to use:
target_link_libraries(foo LINK_INTERFACE_LIBRARIES bar)
where foo is an IMPORTED target. Other tll() signatures are not
allowed.
Previously we kept direct link dependencies in OriginalLinkLibraries.
The property exposes the information in the CMake language through the
get/set_property commands. We preserve the OriginalLinkLibraries value
internally to support old APIs like that for CMP0003's OLD behavior, but
the property is now authoritative. This follows up from commit d5cf644a
(Split link information processing into two steps, 2012-11-01).
This will be used later to populate the link interface properties when
exporting targets, and will later allow use of generator expressions
when linking to libraries with target_link_libraries.
Also make targets depend on the (config-specific) union of dependencies.
CMake now allows linking to dependencies or not depending on the config.
However, generated build systems are not all capable of processing
config-specific dependencies, so the targets depend on the union of
dependencies for all configs.
cc676c3 OS X: Detect implicit linker framework search paths
2dd67c7 OS X: Detect implicit link directories on modern toolchains
ba58d0c OS X: Link with all framework search paths, not just the last
894f52f Handle INTERFACE properties transitively for includes and defines.
f5b1980 Populate the ExportedTargets member early in GenerateMainFile
c67b812 Make cycles in target properties ignored, not an error.
d0f950f Use mapped config properties to evaluate $<CONFIG>
26def17 Make all relevant targets available in the genex context.
0c657dc Add API to populate INTERFACE properties in exported targets.
e04f737 Add API to extract target names from a genex string.
b0c8f73 Add the TARGET_NAME generator expression.
77475fe Allow generator expressions to require literals.
b2f1700 GenEx: Add expressions to specify build- or install-only values
This means for example, that consumers can use:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES})
instead of also needing to specify all 'public' dependencies:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES} ${QT_QTCORE_LIBRARIES} )
when using the IMPORTED targets. Also populate the
IMPORTED_LINK_DEPENDENT_LIBRARIES property so CMake can help the linker
find shared library dependencies.
This is for specifying INCLUDE_DIRECTORIES relevant to the build-location
or the install location for example:
set_property(TARGET foo PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
"$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR};${CMAKE_CURRENT_SOURCE_DIR}>"
"$<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include>"
)
A 'bar' target can then use:
set_property(TARGET bar PROPERTY
INCLUDE_DIRECTORIES
"$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>"
)
and it will work whether foo is in the same project, or an imported target
from an installation location, or an imported target from a build location
generated by the export() command.
Because the generator expressions are only evaluated at build-time, these
new expressions are equivalent to the ZeroNode and OneNode.
The GeneratorExpression test is split into parts. Some shells can't run
the custom command as it is getting too long.
0941d62 Add a way to print the origins of used include directories.
18a3195 Keep track of INCLUDE_DIRECTORIES as a vector of structs.
76ea420 Use cmsys::auto_ptr to manage cmCompiledGeneratorExpressions
Resolve this warning:
".../Tests/CMakeCommands/target_link_libraries/depB.cpp", line 8: warning:
variable "a" was declared but never referenced
DepA a;
^
Add a test that verifies that when ctest -j 4 is called, at most, 4 tests
are executed at any one time.
The test works by running the same script as each of 100 tests. And then setting
up test properties for DEPENDS, RUN_SERIAL, PROCESSORS and COST in order to get
the tests to run in a semi-deterministic ordering, even in parallel. The script
writes a file, sleeps for a bit, and then deletes the file. In the meantime, it
counts files that currently exist, and emits output that triggers a test failure
if the count of files is ever greater than 4.
Prior to the commit that fixed bug #12904, this would result in a failed test
because the output of some of the tests would indicate that more than 4 tests
were running simultaneously.
Now that this issue is resolved, this test will help guarantee that it stays
resolved moving forward.
Previously we hard-coded a list of implicit framework directories but
did not account for CMAKE_OSX_SYSROOT or for changes to the list across
OS X versions. Instead we should automatically detect the framework
directories for the active toolchain.
The parent commit added the "-Wl,-v" option to ask "ld" to print its
implicit directories. It displays a block such as:
Framework search paths:
/...
Parse this block to extract the list of framework directories.
Detection may fail on toolchains that do not list their framework
directories, such as older OS X linkers. Always treat the paths
<sdk>/Library/Frameworks
<sdk>/System/Library/Frameworks
<sdk>/Network/Library/Frameworks # Older OS X only
/System/Library/Frameworks
as implicit. Note that /System/Library/Frameworks should always be
considered implicit so that frameworks CMake finds there will not
override the SDK copies.
We detect the implicit link directories for the toolchain by adding a
flag to get verbose output from the compiler front-end while linking the
ABI detection binary. Newer OS X toolchains based on Clang do not add
the implicit link directories with -L options to their internal
invocation of "ld". Instead they use a linker that comes with the
toolchain and is already configured with the proper directories.
Add the "-Wl,-v" option to ask "ld" to print its implicit directories.
It displays them in a block such as:
Library search paths:
/...
Parse this block to extract the implicit link directories.
While at it, remove the checks introduced by commit efaf335b (Skip
implicit link information on Xcode, 2009-07-23) and commit 5195a664
(Skip implicit link info for multiple OS X archs, 2009-09-22). Discard
the non-system link directories added by Xcode. Discard all detected
implicit libraries in the multi-architecture case but keep the
directories. The directories are still useful without the libraries
just to suppress addition of explicit -L options for them.
Historically CMake has always expanded ${} variable references in the
values given to include_directories(), link_directories(), and
link_libraries(). This has been unnecessary since general ${}
evaluation syntax was added to the language a LONG time ago, but has
remained for compatibility with VERY early CMake versions.
For a long time the re-expansion was a lightweight operation because it
was only processed once at the directory level and the fast-path of
cmMakefile::ExpandVariablesInString was usually taken because values did
not have any '$' in them. Then commit d899eb71 (Call
ExpandVariablesInString for each target's INCLUDE_DIRECTORIES,
2012-02-22) made the operation a bit heavier because the expansion is
now needed on a per-target basis. In the future we will support
generator expressions in INCLUDE_DIRECTORIES with $<> syntax, so the
fast-path in cmMakefile::ExpandVariablesInString will no longer be taken
and re-expansion will be very expensive.
Add policy CMP0019 to skip the re-expansion altogether in NEW behavior.
In OLD behavior perform the expansion but improve the fast-path
heuristic to match ${} but not $<>. If the policy is not set then warn
if expansion actually does anything. We expect this to be encountered
very rarely in practice.
This new CPack generator produces an *.msi installer file.
Requires having the WiX Toolset installed in order to work
properly.
Download the WiX Toolset installer "WiX36.exe" here:
http://wix.codeplex.com/releases/view/93929
These tests were not running properly on Visual Studio or
Xcode dashboards before this commit because of the "Debug"
or "Release" sub-directory. The scripts already have
CMAKE_CPACK_COMMAND since the correct CMake executable is
used to run the scripts, so just use that, rather than
passing down an incorrect path to the CPack executable.
a41d3a4 ExternalProjectUpdateTest: Only support Git 1.6.5 and greater.
de760c1 ExternalProject: Verify when a fetch occurs during update test.
0a34433 ExternalProject: Make sure the ExternalProjectUpdate setup is available.
9b66c8f ExternalProject: Always do a git fetch for a remote ref.
2619f4d ExternalProject: Add tests for UPDATE_COMMAND.
378aa12 ExternalProject: Do smoke tests for Git Tutorial builds.
d075829 ExternalProject: Only run 'git fetch' when required.
The performance feature of only performing a git fetch when needed
during the ExternalProject update step is verified during the test.
A fetch is identified by removing the FETCH_HEAD file and checking for
its reincarnation.
This prepares the numberous tests that occur in the ExternalProjectUpdate
test. The tests were passing previously because a fresh build was not performed.
Tests are added for UPDATE_COMMAND to ensure it is working properly. Testing
infrastructure is added along with tests for Git, but tests for other version
control systems could easily be added in the future.
Build a shared library and an executable linking to it inside the inner
test. Set LINK_DEPENDS_NO_SHARED on the executable. Add a custom
target to compare the output file times. Verify that on the first build
the executable is newer than the library. Then modify a library source
file. Verify that on the second build the library is newer because the
executable did not have a dependency to re-link.
This command works only when building projects using the same
architecture as the running CMake binary. Since it was introduced
CMake has learned macro() and function() to add commands, and the
execute_process() command to launch advanced external computations.
Add a RunCMake.load_command test to verify the warning appears.
828d4f5 Add several get_property() tests
82106e3 GetProperty test: move doc property tests into main process
56125a3 list: add tests for CMP0007 behavior
48ed48f Add test to secure the file(GLOB empty) behavior.
c2a6cb6 file: remove dead code
07251a8 Consolidate list() argument count testing
1b078c3 Add tests for list() invalid arguments
f560977 Add tests for list() argument count
d211e5d CMakeTests: allow to call the check_cmake_test macro with a given file
The code handling IMPLICIT_DEPENDS was only able to track a single file,
the latest file replaced earlier files in the list.
The documentation now mentions that the language has to be prefixed to
every file and the test now uses two implicit dependencies, where only
the second is modified to trigger re-running of the custom command.
Alex
Inspired-by: Michael Wild <themiwi@users.sourceforge.net>
Stephen Kelly
Brad King
Yury G. Kudryashov
David Cole
Nils Gladitz
Petr Kmoch
Matt McCormick
Alex Neundorf