The commit d2536579 (Automoc: fix regression #13667, broken build in
phonon, 2012-11-19) changed Automoc to try to re-add the Qt header dir
if it was stripped out as an implicit include from the moc command
line. When invoking a compiler, those directories are stripped out
because they are built-in, but for moc, there are no built-in directories.
The follow-up commit acc22400 (Automoc: get include dirs without
stripping implicit include dirs off, 2012-12-07) went further by not
removing the implicit include dirs, if they were specified specifically
by the user.
This had the remaining problem that the implicit include dirs appeared
in a different order of precedence for moc compared to the compiler.
Resolve that by stripping out the include dirs, where specified for
the moc command line to, and then appending them at the end. Note that
the order of the appended implicit include directories is the order
they are specified in the CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES, not
the order specified by the user.
Since commit 08cb4fa4 (Process generator expressions in the
INCLUDE_DIRECTORIES property., 2012-09-18), it is possible to use
generator expressions with the include_directories command.
As that command can also have a SYSTEM argument, ensure that the
result of using that argument with generator expressions gives a
sane result.
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
Refactoring in commit 8d674e78 (Ninja: move -LIBPATH behind -link
option, 2012-09-26) accidentally added code that overwrites the
framework search path flags on each iteration instead of appending.
Change '=' to '+=' to fix it. This affects Makefile and Ninja
generators.
This should finally fix#13667 and #13762.
Instead of adding special handling to guess whether implicit include dirs
may have been removed, simply make it possible to query the include dirs
without removing the implicit ones.
Alex
0bbae6f Revert "Move GetLinkInformation to cmGeneratorTarget"
d5cf644 Split link information processing into two steps.
d8a59ea Port cmGeneratorExpression to cmTarget from cmGeneratorTarget.
add_custom_command can have empty DEPENDS arguments, which
was triggering invalid makefile generation for the NMake
Makefiles generator. We were mistakenly emitting the build
directory appended with "/" plus the empty string... which
was then translated to a string ending in \" in build.make...
which nmake choked on.
The solution is not to emit any dependency when the input
DEPENDS is the empty string. Return early from GetRealDependency
in this empty input case.
We're going to need to link to them, and all the linking API is moving
to cmGeneratorTarget.
Skip imported targets when iterating over cmGeneratorTargets in places
where we only want targets we build. The GetGeneratorTargets result now
includes IMPORTED targets where it didn't before. The GetTargets
result, which was what used to be called in these methods does not
include IMPORTED targets. This doesn't relate to any known bugs, but in
some future uses of GetGeneratorTargets it will be important, so
starting the convention and being deliberate now is a good idea.
Commit 08cb4fa4 (Process generator expressions in the
INCLUDE_DIRECTORIES property, 2012-09-18) contained an incorrect
assumption that CMAKE_BUILD_TYPE was set on the makefile for each
generated configuration in multi-config generators. Fix that by making
the GetIncludeDirectories API depend on the config.
1e47ccb Ninja: add option to enforce usage of response files
e31df03 Ninja: move <OBJECTS> in front of the first linker option
8d674e7 Ninja: move -LIBPATH behind -link option
083de7e Process generator expressions in the COMPILE_DEFINITIONS target property.
08cb4fa Process generator expressions in the INCLUDE_DIRECTORIES property.
0ef091d Early return if there is no target.
eb250cd Add a self-reference check for target properties.
7e80747 Add API to check that dependent target properties form a DAG.
239ac84 Add a generator expression for target properties.
e028381 Extend the generator expression language with more logic.
b8e61d6 Refactor GetCompileDefinitions a bit.
2c2b25b Return a std::string from GetCompileDefinitions.
b7e48e0 Add an AppendDefines std::string overload.
9a16087 Convert paths in INCLUDE_DIRECTORIES property to Unix slashes.
4557c8d Don't prepend a path before generator expressions in include_directories.
c6abc41 Add include guard for cmGeneratorExpression.
0ff4e3f Port remaining code to GetCompileDefinitions().
f178d53 Fix indentation in the code blocks generator.
The remainder of this method depends on the target existing (otherwise
the includes container would be empty), so make the code a little more
readable.
879fd35 Revert "Move GenerateTargetManifest to cmGeneratorTarget."
6674583 Fix compiler warning with initialization order.
5285458 Add convenience for getting a cmGeneratorTarget to use.
c31f3d9 Add a wrapper for accessing config-specific compile-definitions.
d1446ca Append the COMPILE_DEFINITIONS from the Makefile to all targets.
290e92a Move GetIncludeDirectories to cmGeneratorTarget.
f9146f6 Port cmLocalGenerator::GetTargetFlags to cmGeneratorTarget.
9facfd1 Move GetCreateRuleVariable to cmGeneratorTarget.
78bfee3 Make cmLocalGenerator::AddArchitectureFlags take a cmGeneratorTarget.
4f5384e Move GetLinkInformation to cmGeneratorTarget
987e12e Move GenerateTargetManifest to cmGeneratorTarget.
14bf778 Store cmGeneratorTargets with the makefile.
f428ca2 Add more forwarding API to cmGeneratorTarget.
Drop the last use of CMAKE_OSX_SYSROOT_DEFAULT. Replace internal
platform variable CMAKE_${lang}_HAS_ISYSROOT with a more general
CMAKE_${lang}_SYSROOT_FLAG variable. If the -isysroot flag exists and
CMAKE_OSX_SYSROOT points to an SDK (not "/") then always add it to
compiler command lines. This is already done in the Xcode IDE.
This reverts commit 987e12e2f9.
GenerateTargetManifest is called by the global generator before it
creates the generator targets, so we can't move it to cmGeneratorTarget
yet.
There is no need to do so. Be consistent with include directories and
ensure uniqueness.
This requires changing the API of the cmLocalGenerator::AppendDefines
method, and changing the generators to match.
The test unfortunately can't test for uniqueness, but it at least verifies
that nothing gets lost.
If a source file extension is not recognized as any language then
src.GetLanguage() may return NULL. Check the result before
dereferencing in cmLocalGenerator::GetObjectFileNameWithoutTarget.
eb410e8 Ninja: disable cldeps for bcc32, it's too old, and ninja would also not build
5ead31d Ninja: try work around for bcc32 bug
1333b57 Ninja: build server fixes
9081e3a remove warning about unused parameter
f430bea Ninja: maybe this fixes the bcc32 build
f2c1288 Ninja: msvc6 for-scoping
44b9bbc Ninja: build with old msvc versions
57156a5 Ninja: build server fixes
f1abdce Ninja: some bytes of the rc files couldn't be piped correctly
2de963d Ninja: don't remove space between command and parameters
50b6f33 Ninja: build cmcldeps with mingw
c05653e Ninja: try to make GetProcessId visible
ab245ff Ninja: but cl supports /nologo ...
bf58e9a Ninja: no /nologo option in old rc.exe
2fb07fc Ninja: Eclipse and KDevelop fixes for ninja
518c065 Ninja: don't pollute build dir with preprocessed rc files
...
CMAKE_SHARED_LIBRARY_<lang>_FLAGS has flags on various platforms for a
variety of purposes that are correlated with shared libraries but not
exclusive to them. Refactor generation of these flags to use new
purpose-specific platform variables
CMAKE_<lang>_COMPILE_OPTIONS_DLL
CMAKE_<lang>_COMPILE_OPTIONS_PIC
CMAKE_<lang>_COMPILE_OPTIONS_PIE
Activate the DLL flags specifically for shared libraries. Add a new
POSITION_INDEPENDENT_CODE target property to activate PIC/PIE flags, and
default to true for shared libraries to preserve default behavior.
Initialize the new property from CMAKE_POSITION_INDEPENDENT_CODE to
allow easy global configuration in projects.
Although the default behavior is unchanged by this refactoring, the new
approach ignores CMAKE_SHARED_LIBRARY_<lang>_FLAGS completely. We must
leave it set in case projects reference the value. Furthermore, if a
project modifies CMAKE_SHARED_LIBRARY_<lang>_FLAGS it expects the new
value to be used. Add policy CMP0018 to handle compatibility with
projects that modify this platform variable.
Add a PositionIndependentCode test on platforms where we can get
meaningful results.
Add a boolean target property NO_SONAME which may be used to disable
soname for the specified shared library or module even if the platform
supports it. This property should be useful for private shared
libraries or various plugins which live in private directories and have
not been designed to be found or loaded globally.
Replace references to <CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG> and
hard-coded -install_name flags with a conditional <SONAME_FLAG> which is
expanded to the value of the CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG
definition as long as soname supports is enabled for the target in
question. Keep expanding CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG in
rules in case third party projects still use it. Such projects would
not yet use NO_SONAME so the adjacent <TARGET_SONAME> will always be
expanded. Make <TARGET_INSTALLNAME_DIR> NO_SONAME aware as well. Since
-install_name is soname on OS X, this should not be a problem if this
variable is expanded only if soname is enabled.
The Ninja generator performs rule variable substitution only once
globally per rule to put its own placeholders. Final substitution is
performed by ninja at build time. Therefore we cannot conditionally
replace the soname placeholders on a per-target basis. Rather than
omitting $SONAME from rules.ninja, simply do not write its contents for
targets which have NO_SONAME. Since 3 variables are affected by
NO_SONAME ($SONAME, $SONAME_FLAG, $INSTALLNAME_DIR), set them only if
soname is enabled.
This library type can compile sources to object files but does not link
or archive them. It will be useful to reference from executable and
normal library targets for direct inclusion of object files in them.
Diagnose and reject the following as errors:
* An OBJECT library may not be referenced in target_link_libraries.
* An OBJECT library may contain only compiling sources and supporting
headers and custom commands. Other source types that are not normally
ignored are not allowed.
* An OBJECT library may not have PRE_BUILD, PRE_LINK, or POST_BUILD
commands.
* An OBJECT library may not be installed, exported, or imported.
Some of these cases may be supported in the future but are not for now.
Teach the VS generator that OBJECT_LIBRARY targets are "linkable" just
like STATIC_LIBRARY targets for the LinkLibraryDependencies behavior.
d662dff Fix shadowed variable warning on dashboard results
f66e735 Fix compiler warning reported on older Borland dashboard.
d90eed4 Fix compiler error reported on older Borland dashboard.
8233636 Update the documentation regarding INCLUDE_DIRECTORIES.
d899eb7 Call ExpandVariablesInString for each target's INCLUDE_DIRECTORIES
c21db87 Make search paths ordered and unique
22021f0 Remove cmMakefile::GetIncludeDirectories
9106b56 Extract and use the INCLUDE_DIRECTORIES target properties.
840509b Keep the INCLUDE_DIRECTORIES target property up to date.
a4d5f7b Add API to get the ordered includes for a target.
8adaee2 CMake: Eliminate cmMakefile::IncludeDirectories
7620932 Remove include flags memoization.
97a5faa Make it safe to call this method without creating duplicates.
edd5303 Refactor GetIncludeFlags to take includes instead of fetching them
Remove partial implementation added by commit ca0230a3 (check in initial
conv library stuff, 2007-02-16) since it was never finished. It does
not make sense for multi-configuration generators since no specific
build configuration is processed at CMake time.
The purpose of the TargetType enumeration was overloaded for install
type because install rules were once recorded as targets. Factor the
install types out into their own enumeration.
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
Specifically, perform configuration-dependent lookup of
STATIC_LIBRARY_FLAGS for static libraries, and use the correct prefix
for configuration-dependent lookup of LINK_FLAGS (i.e. "LINK_FLAGS_",
as opposed to the value of the LINK_FLAGS property).
Make it a static method instead of an array. It is safer for the
type checking and if we add a new target type we will be warned to add
a case to the switch.
Define a "Fortran_FORMAT" target and source file property. Initialize
the target property from a "CMAKE_Fortran_FORMAT" variable. Interpret
values "FIXED" and "FREE" to indicate the source file format. Append
corresponding flags to the compiler command line.
All commands accepting file paths should normalize the slashes so that
the string-represented names can be compared reliably. The commands
add_library and add_executable have done this for years. We taught
add_custom_command to normalize its OUTPUT names in commit a75a0a14
(Normalize add_custom_command OUTPUT names, 2010-12-15). We handled a
special case of the DEPENDS option in commit 7befc007 (Handle trailing
slashes on add_custom_command DEPENDS, 2011-01-26).
Teach both add_custom_command and add_custom_target to normalize slashes
of DEPENDS files up front. This approach subsumes the above-mentioned
special case so remove the one line added for it but keep its test.
Extend the CustomCommand test to check that slash count mismatches
between custom command OUTPUT and DEPENDS can still be linked correctly.
86cb17b Pass include directories with response files to GNU on Windows
9a0b9bc Optionally pass include directories with response files
6e8a67f Generate target-wide flags before individual build rules
d099546 Factor old-style -D flags out from -I flag generation
Create platform option CMAKE_<lang>_USE_RESPONSE_FILE_FOR_INCLUDES to
enable use of response files for passing the list of include directories
to compiler command lines.
Move the GetDefineFlags call from cmLocalGenerator::GetIncludeFlags to
all call sites so that the method exclusively constructs a string of
include search path flags.
The cmCustomCommandGenerator::GetCommand method completely replaces the
purpose of this method. Re-implement GetRealLocation inline at the only
remaining call site and remove it.
A custom command may name a target created by add_custom_target in its
DEPENDS field. Treat this case as a target-level dependency only since
a custom target provides no standard file on which to add a file-level
dependency.
Factor out reading of CMAKE_CONFIGURATION_TYPES and CMAKE_BUILD_TYPE
into cmMakefile::GetConfigurations. Read the former only in
multi-config generators.
Response files are parsed by tools, not by shells. We teach
cmLocalGenerator::Convert() a new "RESPONSE" output format and use it
for objects listed in response files. It does not do special slash or
MSYS root translation like the "SHELL" format does. This is necessary
for GNU tools on Windows to understand response file content.
See issue #10401.
The Watcom tools do their own command-line parsing and do not accept
double-quotes. Instead we single-quote the target output name when
invoking wlink and other Watcom tools. This fixes support for spaces in
the target output directory path when it is not under the build tree.
The CMAKE_OSX_ARCHITECTURES variable works only as a global setting.
This commit defines target properties
OSX_ARCHITECTURES
OSX_ARCHITECTURES_<CONFIG>
to specify OS X architectures on a per-target and per-configuration
basis. See issue #8725.
This commit re-writes Borland compiler build rules. We split the rules
into modern <os>-<id>-<lang> information modules but share a common
macro between languages to avoid duplication.
We also address a bug in the previous rules that would build some target
types against the static Borland runtime and others against the shared
Borland runtime in one build tree. Now we always use the shared runtime
as is the default in the rules for MS tools.
This creates cmTarget::GetFeature and cmMakefile::GetFeature methods to
query "build feature" properties. These methods handle local-to-global
scope and per-configuration property lookup. Specific build features
will be defined later.
Since Haiku does not have /usr (and therefore /usr/local), this commit
changes the default install prefix to the equivalent directory of
/boot/common.
See issue #9607.
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
In cmLocalGenerator::ConvertToRelativePath we normally convert to
relative path only if the local and remote paths both lie inside the
source tree or both lie inside the build tree. This commit adds an
optional 'force' argument to allow conversion even when this rule is
violated.
Previously we checked for this flag by parsing the version number of GCC
out of 'gcc --version', but this is not reliable because the format can
vary greatly. Now we run 'gcc -v --help' and look for '-isysroot' in
the list of options.
We also now store the result on a per-language basis in the per-compiler
info file "CMake<LANG>Compiler.cmake". This is necessary to make it
accessible from try-compile projects so that they generate correctly.
Until now CMake accidentally accepted add_subdirectory() and subdirs()
calls referring to directories that do not contain a CMakeLists.txt
file. We introduce CMake Policy CMP0014 to make this case an error.
This method tells the cmMakefile to read the input CMakeLists.txt file.
We factor out the call into a ReadInputFile method so it can be extended
without polluting the Configure method.
Much of the code in this method was dedicated to computing ObjectMaxPath
after configuring the directory. We move this last step into its own
ComputeObjectMaxPath method for better organization.
The cmLocalGenerator::Configure method sets its cmLocalGenerator
instance as the global generator's current local generator during
configuration. This commit refactors management of the current local
generator to use an automatic variable. This will allow early returns
from the method.
This method previously required the global generator to be passed, but
that was left from before cmTarget had its Makefile member. Now the
global generator can be retrieved automatically, so we can drop the
method argument.
Previously we rejected all preprocessor definition values containing
spaces for the VS6 IDE generator. In fact VS6 does support spaces but
not in combination with '"', '$', or ';', and only if we use the sytnax
'-DNAME="value with spaces"' instead of '-D"NAME=value with spaces"'.
Now we support all definition values that do not have one of these
invalid pairs. See issue #8779.
This moves code which generates ADD_TEST and SET_TESTS_PROPERTIES calls
into CTestTestfile.cmake files out of cmLocalGenerator and into a
cmTestGenerator class. This will allow more advanced generation without
cluttering cmLocalGenerator. The cmTestGenerator class derives from
cmScriptGenerator to get support for per-configuration script
generation (not yet enabled).
This moves the version numbers into an isolated configured header so
that not all of CMake needs to rebuild when the version changes.
Previously we had spaces, dashes and/or the word 'patch' randomly chosen
before the patch number. Now we always report version numbers in the
traditional format "<major>.<minor>.<patch>[-rc<rc>]".
We still use odd minor numbers for development versions. Now we also
use the CCYYMMDD date as the patch number of development versions, thus
allowing tests for exact CMake versions.
Brad King
Stephen Kelly
Andreas Mohr
Alex Neundorf
David Cole
Peter Kümmel
Mariusz Plucinski
Peter Collingbourne
Modestas Vainius
Yury G. Kudryashov
Nicolas Despres
Kai Wasserbäch
Bill Hoffman
Ken Martin