Commit Graph

36 Commits

Author SHA1 Message Date
Stephen Kelly 205215fb8a cmTarget: Add CXX_STANDARD_REQUIRED to control decay. 2014-05-07 12:17:49 +02:00
Stephen Kelly 0d9c99bf04 Help: Fix order of help entries. 2014-05-07 12:16:11 +02:00
Stephen Kelly 3fdfa5d3fc Features: Make CMAKE_CXX_KNOWN_FEATURES a property.
As a 'built-in' variable it imposes a cost on all variable lookups
and it is expected to be rarely used.
2014-05-02 10:18:16 +02:00
Stephen Kelly faeddf64f2 project: Add infrastructure for recording CXX compiler features
Add a feature test using the compiler macros and the preprocessor to
determine available features.

Add a CMAKE_CXX_COMPILE_FEATURES variable which contains all features
known to the loaded compiler, and a CMAKE_CXX_KNOWN_FEATURES variable
containing all features known to CMake.  Add language standard specific
variables for internal use to determine the standard-specific compile
flags to use.

This will be extended to other languages in the future.  Follow-up
commits will add features which will be recorded by the feature test.
2014-04-07 16:48:44 +02:00
Stephen Kelly 913394af24 cmTarget: Add CXX_STANDARD and CXX_EXTENSION target properties.
These are used to determine whether to add -std=c++11, -std=gnu++11
etc flags on the compile line.
2014-04-07 16:48:44 +02:00
Brad King 8018fcca6e Merge branch 'master' into revise-compiler-id-policies 2014-04-02 14:44:35 -04:00
Brad King a41c0a9dcb Do not warn by default when policy CMP0025 or CMP0047 is not set
These policies are triggered by the use of a particular compiler rather
than outdated CMake code in a project.  Avoid warning in every project
that enables a language by not displaying the policy warning by default.
Add variable CMAKE_POLICY_WARNING_CMP<NNNN> to control the warning
explicitly; otherwise enable the warning with --debug-output or --trace.

This breaks with strict policy convention because it does not provide
developers with any warning about the behavior change by default.
Existing projects will continue to build without a warning or change in
behavior.  When a developer changes the minimum required version of
CMake in a project to a sufficiently high value (3.0), the project will
suddenly get the new compiler id and may break, but at least the
breakage comes with a change to the project rather than the version of
CMake used to build it.

Breaking strict policy convention is worthwhile in this case because
very few projects will be affected by the behavior change but every
project would have to see the warning if it were enabled by default.
2014-04-02 14:43:54 -04:00
Brad King e21ffaf8fe Merge topic 'doc-osx-path-variables'
764e977a Help: Document variables CMAKE_APPBUNDLE_PATH and CMAKE_FRAMEWORK_PATH
2014-03-10 10:35:32 -04:00
Brad King 764e977ad7 Help: Document variables CMAKE_APPBUNDLE_PATH and CMAKE_FRAMEWORK_PATH 2014-03-10 10:23:42 -04:00
Brad King fba51b096e MSVC: Add properties to configure compiler PDB files (#14762)
Since commit v2.8.12~437^2~2 (VS: Separate compiler and linker PDB files
2013-04-05) we no longer set /Fd with the PDB_NAME or PDB_OUTPUT_DIRECTORY
properties.  Those properties now exclusively handle linker PDB files.
Since STATIC libraries do not link their compiler PDB file becomes more
important.  Add new target properties "COMPILE_PDB_NAME[_<CONFIG>]" and
"COMPILE_PDB_OUTPUT_DIRECTORY[_<CONFIG>]" to specify the compiler PDB
file location and pass the value to the MSVC /Fd option.
2014-02-26 09:34:38 -05:00
Brad King 7e142c5ac2 project: Manage VERSION variables
Teach the project() command to set variables

  {PROJECT,<PROJECT-NAME>}_VERSION{,_MAJOR,_MINOR,_PATCH,_TWEAK}

holding the project version number and its components.  Add project()
command option "VERSION" to specify the version explicitly, and default
to the empty string when it is not given.

Since this clears variables when no VERSION is given, this may change
behavior for existing projects that set the version variables themselves
prior to calling project().  Add policy CMP0048 for compatibility.

Suggested-by: Alex Neundorf <neundorf@kde.org>
2014-01-29 09:45:18 -05:00
Brad King 00007dcc36 Help: Format project command and variable documentation
Also add document for CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE variable.
2014-01-29 09:15:20 -05:00
Brad King 45056264bb Help: Document CMAKE_OSX_* variables
Add documentation entries for variables

 CMAKE_OSX_ARCHITECTURES
 CMAKE_OSX_DEPLOYMENT_TARGET
 CMAKE_OSX_SYSROOT

Explain what each does and when/how they should be set.
2014-01-16 10:21:47 -05:00
Brad King 69c366a281 Merge topic 'optional-install'
be0458c InstallRules: added new variable to disable generation of install rules
2014-01-09 09:37:17 -05:00
Nils Gladitz be0458c562 InstallRules: added new variable to disable generation of install rules
The boolean variable CMAKE_SKIP_INSTALL_RULES
allows disabling generation of install rules for projects which don't
want them.
2014-01-08 16:28:14 +01:00
Clinton Stimpson d25ad482e9 OS X: Add CMP0042 to enable MACOSX_RPATH by default
Also adding documentation for CMAKE_MACOSX_RPATH, and improving
documentation for MACOSX_RPATH.
2014-01-02 13:41:49 -05:00
Brad King 520ead7200 Merge topic 'cleanup-build-commands'
e420124 CMakeDetermineCompilerId: Use CMAKE_VS_(DEVENV|MSBUILD|MSDEV)_COMMAND
0c55729 VS: Add CMAKE_VS_(DEVENV|MSBUILD|MSDEV)_COMMAND variables
2013-12-05 09:24:59 -05:00
Brad King 0c55729c13 VS: Add CMAKE_VS_(DEVENV|MSBUILD|MSDEV)_COMMAND variables
Since commit 5f5c92b9 (VS: Add internal APIs to find MSBuild,
devenv/VCExpress, and msdev, 2013-11-13) the VS generators have
known how to lookup the locations of their build tools directly.
Expose this information to CMake language code by defining new
variables to hold the paths to these tools.
2013-12-04 11:05:05 -05:00
Brad King a6b45087a1 Merge topic 'cmake-toolchains-manual'
c45b5ce Help: Add cmake-toolchains.7 manual
3e3f8b4 Help: Document the CMAKE_FIND_ROOT_PATH* variables.
531c108 Help: Document the CMAKE_TOOLCHAIN_FILE.
2013-12-03 09:45:28 -05:00
Brad King cb7b90726c Help: Document CMAKE_PDB_OUTPUT_DIRECTORY_<CONFIG> variable 2013-12-02 11:11:07 -05:00
Stephen Kelly 3e3f8b456f Help: Document the CMAKE_FIND_ROOT_PATH* variables.
Add a replacement template for the variables, and link to them from
the documentation for the find_* commands.
2013-11-27 13:21:12 +01:00
Stephen Kelly 531c108da1 Help: Document the CMAKE_TOOLCHAIN_FILE.
Link to the new docs from existing references to the variable.
2013-11-27 13:21:12 +01:00
Peter Kümmel 7605e37aab Ninja: job pool support for compiling and linking
Could be tested by setting the environment
variable NINJA_STATUS=[%r]
2013-11-25 22:23:24 +01:00
Stephen Kelly 7521da2852 Introduce CMAKE_STAGING_PREFIX variable.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.

If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.

This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.

If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.

The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
2013-11-21 11:48:03 +01:00
Stephen Kelly 7cd65c97fa Add CMAKE_SYSROOT variable to set --sysroot when cross compiling.
As CMAKE_ROOT_FIND_PATH can be a list, a new CMAKE_SYSROOT is
introduced, which is never a list.

The contents of this variable is passed to supporting compilers
as --sysroot. It is also accounted for when processing implicit
link directories reported by the compiler, and when generating
RPATH information.
2013-11-19 12:39:39 -05:00
Stephen Kelly 5096967ecd Allow toolchain files to specify an external toolchain.
Clang can compile code, but uses the gcc tools for other tasks such
as linking. The -gcc-toolchain option can be used for that, but
generalize so that other compilers can be treated the same.

If such a location is specified, use it as a hint for finding
the binutils executables.
2013-11-19 12:39:34 -05:00
Stephen Kelly 76552d595d Add compiler target compile options.
For clang, this allows passing -target <triple> to the compiler, and
for qcc, -V<arch> using toolchain files containing something like

 set(triple arm-linux-gnueabihf)
 set(CMAKE_C_COMPILER "/usr/bin/clang")
 set(CMAKE_C_COMPILER_TARGET ${triple})
 set(CMAKE_CXX_COMPILER "/usr/bin/clang++")
 set(CMAKE_CXX_COMPILER_TARGET ${triple})

or

 set(arch gcc_ntoarmv7le)
 set(CMAKE_C_COMPILER /opt/qnx650/host/linux/x86/usr/bin/qcc)
 set(CMAKE_C_COMPILER_TARGET ${arch})
 set(CMAKE_CXX_COMPILER /opt/qnx650/host/linux/x86/usr/bin/QCC)
 set(CMAKE_CXX_COMPILER_TARGET ${arch})

Both clang and qcc are inherently cross compiler( driver)s.

When cross-compiling with clang, use the CMAKE_${lang}_COMPILER_TARGET
as the _CMAKE_TOOLCHAIN_PREFIX to find the appropriate binutils.

When cross-compiling with QNX qcc, use the CMAKE_${lang}_COMPILER_TARGET
to set the appropriate _CMAKE_TOOLCHAIN_PREFIX.
2013-11-19 12:38:53 -05:00
Stephen Kelly 12d10a00ac Add missing documentation for include dirs related variables. (#12611)
Document CMAKE_INCLUDE_DIRECTORIES_BEFORE and
CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE.
2013-11-02 16:06:19 +01:00
Brad King c76e44e7b9 Help: Limit reference manual toctree depth to 1
Add a :maxdepth: option to all toctree directives to limit their depth
to 1.  We do not want subheadings from individual documents to pollute
the already large lists of CMake Domain objects.
2013-11-01 11:12:02 -04:00
Brad King e065decd43 Merge topic 'add-CMAKE_FIND_NO_INSTALL_PREFIX'
fe057ab Allow disabling adding the install prefix to the prefix search path.
2013-11-01 09:40:19 -04:00
Stephen Kelly fe057ab3cd Allow disabling adding the install prefix to the prefix search path.
In certain scenarios, it is preferable to keep a 'dirty' install prefix
than to clear it, and to expect that content will not be found there.
Add a CMAKE_FIND_NO_INSTALL_PREFIX variable that can be set to disable
searching the install prefix.
2013-10-31 16:40:24 +01:00
Brad King f88332f5b7 Help: Glob manual/*.rst in Sphinx configuration
Add the man page description line as explicit markup at the top of each
Help/manual/*.rst file and scan it from conf.py to automatically
generate the man_pages Sphinx configuration value.  This reduces the
number of places that need to be changed when a new manual is added.
2013-10-30 09:58:25 -04:00
Stephen Kelly 9c87d9cc3e Add automatic rcc invocation for Qt.
This replaces the need to invoke qt4_add_resources by allowing
adding the source .qrc file directly to the target sources.
2013-10-24 12:30:41 +02:00
Stephen Kelly 84218e1870 Add automatic uic invocation for Qt.
The source files are already processed by cmQtAutomoc to look for
moc includes, so extend that to also look for ui_ includes and
find corresponding .ui files to process.

This replaces the need to invoke qt4_wrap_ui().

As the ui files are not likely to be part of the SOURCES of the
target, store the options associated with them separately in the
cmMakefile for querying during the autogen run.
2013-10-24 12:30:38 +02:00
Brad King b8522a8c8a VS: Expose Intel Fortran .vfproj format version to CMake language
Lookup the Intel VS plugin version on demand in the VS global generator,
compute the corresponding .vfproj format version number, and memoize it.
Add it as a CMAKE_VS_INTEL_Fortran_PROJECT_VERSION platform definition.
2013-10-18 09:55:50 -04:00
Kitware Robot f051814ed0 Convert builtin help to reStructuredText source files
Run the convert-help.bash script to convert documentation:

 ./convert-help.bash "/path/to/CMake-build/bin"

Then remove it.
2013-10-15 14:12:03 -04:00