In the response file also linker options could be passed,
and because <OBJECTS> is replaced by a response file, it
is necessary that no compiler option follows <OBJECTS>.
This reverts commit 5598d9b2a0.
Since commit f1670ab1 (Ninja: don't confuse ninja's rsp files with
nmake's, 2012-09-26) Ninja generator response files are placed in
CMakeFiles/ so the previously existing check already avoids expanding
them.
Since commit 1786b121 (OS X: Allow CMAKE_OSX_SYSROOT to be a logical SDK
name, 2012-09-21) we support names like "macosx" or "macosx10.7" as the
specified value of CMAKE_OSX_SYSROOT. Extend the SDK name->path
conversion to save the original value and also convert into a temporary
variable for the Xcode generator. Re-implement the deployment target
sanity check to detect the version from the transformed path.
Since commit 230ea218 (OS X: Improve default CMAKE_OSX_SYSROOT
selection, 2012-09-21) we always set CMAKE_OSX_SYSROOT if any SDK is
found in order to support Makefile generator builds with Xcode >= 4.3
without the command-line tools installed. However, in the basic
POSIX-only case of the Makefile generator with command-line tools and no
CMAKE_OSX_ARCHITECTURES we should not select any SDK by default.
Xcode supports SDKROOT values that just name an SDK rather than
specifying the full path to it. Recognize these values and handle them.
For Xcode we just put the value directly in the generated project file.
For Makefile generators we ask xcodebuild to provide the full path to
the named SDK.
Suggested-by: Jason DiCioccio <jd@ods.org>
Simplify the search for OSX_DEVELOPER_ROOT and allow it to fail if no
"/Developer" exists. When it does exist, always find a MacOSX SDK
inside it to use as the default CMAKE_OSX_SYSROOT. Otherwise set
CMAKE_OSX_SYSROOT to empty.
Drop the last use of CMAKE_OSX_SYSROOT_DEFAULT. Replace internal
platform variable CMAKE_${lang}_HAS_ISYSROOT with a more general
CMAKE_${lang}_SYSROOT_FLAG variable. If the -isysroot flag exists and
CMAKE_OSX_SYSROOT points to an SDK (not "/") then always add it to
compiler command lines. This is already done in the Xcode IDE.
Clang has the same interface as GNU except that we do not need to test
for the deployment target and sysroot flags. Simply set variables
CMAKE_${lang}_HAS_ISYSROOT
CMAKE_${lang}_OSX_DEPLOYMENT_TARGET_FLAG
to true because every version of Clang available on OS X supports these
flags.
This enables CMake to create Makefiles targeting Windows CE devices.
CMake needs to be run within a cross compile command prompt and requires
a toolchain file which sets CMAKE_SYSTEM_NAME to "WindowsCE" and
optionally CMAKE_SYSTEM_VERSION.
In commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23) we
accidentally flipped the 0/1 values of MSVC_IDE. Flip them back and
teach the CheckCompilerRelatedVariables test to check the variable.
Remove the old-style "Windows-cl.cmake" and its helper "cl.cmake". Load
the information through new-style "Platform/Windows-MSVC-<lang>.cmake"
files. Factor information common to C and CXX into a helper file
"Platform/Windows-MSVC.cmake" loaded from the per-language files.
Teach Windows-cl.cmake to use CMAKE_(C|CXX)_COMPILER_VERSION to set the
"MSVC##" and MSVC_VERSION variables. It no longer needs the IDE generator
to dictate the version or to detect the version by running the
command-line tool for NMake and Ninja generators. Drop configuration of
CMakeCPlatform.cmake and CMakeCXXPlatform.cmake from Windows-cl.cmake.in
because all the results it saved are now cheap to compute every time.
At the top of a build tree we configure inside the CMakeFiles directory
files such as "CMakeSystem.cmake" and "CMake<lang>Compiler.cmake" to
save information detected about the system and compilers in use. The
method of detection and the exact results store varies across CMake
versions as things improve. This leads to problems when loading files
configured by a different version of CMake. Previously we ignored such
existing files only if the major.minor part of the CMake version
component changed, and depended on the CMakeCache.txt to tell us the
last version of CMake that wrote the files. This led to problems if the
user deletes the CMakeCache.txt or we add required information to the
files in a patch-level release of CMake (still a "feature point" release
by modern CMake versioning convention).
Ensure that we always have version-consistent platform information files
by storing them in a subdirectory named with the CMake version. Every
version of CMake will do its own system and compiler identification
checks even when a build tree has already been configured by another
version of CMake. Stored results will not clobber those from other
versions of CMake which may be run again on the same tree in the future.
Loaded results will match what the system and language modules expect.
Rename the undocumented variable CMAKE_PLATFORM_ROOT_BIN to
CMAKE_PLATFORM_INFO_DIR to clarify its purpose. The new variable points
at the version-specific directory while the old variable did not.
Several more recent Visual Studio Express editions are now available and
they support debug builds. Simplify our VS platform files by removing
support for these old tools. If anyone still uses them we can restore
support with a more modern way to test for them.
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the
block. This is no longer the preferred style.
Run the following shell code:
for c in else endif endforeach endfunction endmacro endwhile; do
echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
egrep -z -v 'Tests/CMakeTests/While-Endwhile-' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
Since commit c198730b (Detect Watcom compiler version with its id,
2011-12-07) the CMAKE_(C|CXX)_COMPILER_VERSION variables are set for the
Watcom compiler. Use these in Windows-wcl386.cmake to set the old
WATCOM1* version variables. This avoids using the old EXECUTE_PROCESS
command which failed due to extra quotes anyway.
Teach CMake to prefer the system default compiler automatically when no
compiler is specified. By default use "cc" for C, "CC" for C++, and
"f95" for Fortran. Load a new Platform/<os>-<lang>.cmake module to
allow each platform to specify for each language its system compiler
name(s) and/or exclude certain names.
Create Platform/(CYGWIN|Darwin|Linux|Windows)-CXX.cmake modules to
specify "c++" as the system C++ compiler name for these platforms. On
systems that use case-insensitive filesystems exclude C++ compiler names
that are distinguished from C compiler names only by case.
This will change the default compiler selection for existing build
scripts that do not specify a compiler when run on machines with
separate system and GNU compilers both installed in the PATH. We do not
make this change in default behavior lightly. However:
(1) If a given build really needs specific compilers one should specify
them explicitly e.g. by setting CC, CXX, and FC in the environment.
(2) The motivating case is to prefer the system Clang on newer OS X
systems over the older GNU compilers typically also installed. On
such systems the names "cc" and "c++" link to Clang. This is the
first platform known to CMake on which "c++" is not a GNU compiler.
The old behavior selected "gcc" for C and "c++" C++ and therefore
chooses GNU for C and Clang for C++ by default. The new behavior
selects GNU or Clang consistently for both languages on older or
newer OS X systems, respectively.
(3) Other than the motivating OS X case the conditions under which the
behavior changes do not tend to exist in default OS installations.
They typically occur only on non-GNU systems with manually-installed
GNU compilers.
(4) The consequences of the new behavior are not dire. At worst the
project fails to compile with the system compiler when it previously
worked with the non-system GNU compiler. Such failure is easy to
work around (see #1).
In short this change creates a more sensible default behavior everywhere
and fixes poor default behavior on a widely-used platform at the cost of
a modest change in behavior in less-common conditions.
4bb94c9 Ninja: sysconf() is declared in unistd.h
bb36759 Ninja: enable response file support on Mac (length 262144)
3a2c8e8 Ninja: disable work around when linking with mingw
3856e66 Ninja: error on missing rspfile_content
8c1e35c Ninja: remove some unused default arguments
7f647cf Ninja: also write link libraries to rsp file
The work around is only needed by older GCCs (only testet 4.4/4.7)
Ninja is very new so chances are high that there is also a new mingw.
Use slashes in link rsp file, because ar.exe can't handle \.
Among other flags this sets RPATH flags correctly so that CMake knows
how to treat CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH for the ASM language.
This is the GNU compiler equivalent to commit a0bab7ae (Add ASM platform
information for XL compiler on AIX, 2011-03-02), made for XL.
bd34963 Refactor generation of shared library flags
55d7aa4 Add platform variable for flags specific to shared libraries
31d7a0f Add platform variables for position independent code flags
Store in new platform variables
CMAKE_${lang}_COMPILE_OPTIONS_PIC
CMAKE_${lang}_COMPILE_OPTIONS_PIE
flags for position independent code generation.
In almost all cases, this means duplication of the
CMAKE_SHARED_LIBRARY_${lang}_FLAGS for the _PIC case and using the
assumed pie equivalent for the _PIE case. Note that the GNU compiler
has supported -fPIE since 3.4 and that there is no -fPIC on GNU for
Windows or Cygwin.
There is a possibility that the _PIE variables are not correct.
However, as there is no backwards compatibility to be concerned about
(as the POSITION_INDEPENDENT_CODE property is not used anywhere yet),
the current state suffices.
The default for `CMAKE_FIND_FRAMEWORK`, defined in `Darwin.cmake` and
`Darwin-icc.cmake`, is now guarded so that it will not override command line
arguments passed by users.
Similarly for `CMAKE_FIND_APPBUNDLE`
Add a boolean target property NO_SONAME which may be used to disable
soname for the specified shared library or module even if the platform
supports it. This property should be useful for private shared
libraries or various plugins which live in private directories and have
not been designed to be found or loaded globally.
Replace references to <CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG> and
hard-coded -install_name flags with a conditional <SONAME_FLAG> which is
expanded to the value of the CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG
definition as long as soname supports is enabled for the target in
question. Keep expanding CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG in
rules in case third party projects still use it. Such projects would
not yet use NO_SONAME so the adjacent <TARGET_SONAME> will always be
expanded. Make <TARGET_INSTALLNAME_DIR> NO_SONAME aware as well. Since
-install_name is soname on OS X, this should not be a problem if this
variable is expanded only if soname is enabled.
The Ninja generator performs rule variable substitution only once
globally per rule to put its own placeholders. Final substitution is
performed by ninja at build time. Therefore we cannot conditionally
replace the soname placeholders on a per-target basis. Rather than
omitting $SONAME from rules.ninja, simply do not write its contents for
targets which have NO_SONAME. Since 3 variables are affected by
NO_SONAME ($SONAME, $SONAME_FLAG, $INSTALLNAME_DIR), set them only if
soname is enabled.
Use of the deprecated option with Intel 2011 produces
icl: command line remark #10010: option '/GX' is deprecated and will
be removed in a future release. See '/help deprecated'
so use its replacement option which has been supported for several
older versions anyway.
The parent commit added a search path relative to OSX_DEVELOPER_ROOT.
But with Xcode 4.3 the nested Applications folder is in a different
relative location compared to that root. This commit makes the intent
of the previous commit work with older and newer Xcode directory layouts.
Furthermore, it only adds paths that exist to the search path.
Since commit 4693cf84 (Xcode: Detect new default locations of Xcode 4.3
bits and pieces) Darwin.cmake detects the developer application
directory instead of hard-coding /Developer. Replace the hard-coded
path in CMAKE_SYSTEM_APPBUNDLE_PATH using the computed result.
0f4dfa6 CPack: Use real path to PackageMaker to find its version file (#12621)
4693cf8 Xcode: Detect new default locations of Xcode 4.3 bits and pieces (#12621)
8485208 Ninja: shell escape $(CMAKE_SOURCE_DIR) and $(CMAKE_BINARY_DIR)
df84767 Ninja: add support for OBJECT_OUTPUTS, fix PrecompiledHeader test case
48eb7fc Ninja: Avoid using 'this' in member initializers
bba37dd Ninja: Fix for PDB files with spaces in the path.
ac800f4 Ninja: Constify use of cmCustomCommand
9a0d5a8 Ninja: add /DEF: flag to linker call
d40eebd Ninja: Add a cache option CMAKE_ENABLE_NINJA to enable the ninja generator.
8c63433 Ninja: Add friend struct so it can access the private ConvertToNinjaPath.
dbe3dce Ninja: add .def file support
f1bb08f Ninja: ensure the output dir exists at compile time
7a6b5f4 Ninja: Remove an unnecessary variable
80ff210 Ninja: Use cmSystemTools::ExpandListArgument to split compile/link commands
d2731a3 Ninja: Add a missed license header
eabc9b0 Ninja: CMake: Adapt Ninja generator for per-target include dirs
bada88e Merge branch 'target-include-directories' into ninja-generator
54bd175 Ninja: windows msvc: create for each target a .pdb file
...
Xcode 4.3 installs into "/Applications" by default, from the Mac App Store.
Also, the paths to the available SDKs changed: they are now within the
Xcode.app bundle.
PackageMaker is installed as a separate program, and may be installed
anywhere. It is not installed with Xcode 4.3 by default anymore.
Download the "Auxiliary Tools for Xcode" to get PackageMaker.
Put PackageMaker inside the Xcode.app bundle, in its nested Applications
folder, or put it alongside Xcode in "/Applications" and CMake will find
it.
Update references to "find" paths: add new possible locations for finding
Xcode.app and PackageMaker.app. Prefer the most recent version's locations
first, but keep the old locations as fallback search paths, too.
Thanks to all the contributors who provided and tested out various patches
for fixing this issue. Especially, but by no means limited to:
Francisco Requena Espí, Jamie Kirkpatrick and drfrogsplat.
The Borland compiler was re-branded as CodeGear during 2007-2009 and
since 2009 is the Embarcadero compiler. They offer predefined macros:
http://docwiki.embarcadero.com/RADStudio/en/Predefined_Macros
and distinguish themselves by __CODEGEARC__ and __CODEGEARC_VERSION__.
Version 6.30 (C++Builder XE) changed the meaning of some flags:
http://docwiki.embarcadero.com/RADStudio/en/C%2B%2B_Compiler_Option_Changes_for_XE
Teach Embarcadero compiler information files to generate build rules
with flags matching the compiler version. Leave the flags unchanged
for old Borland versions. Always set the BORLAND toolchain indicator
for compatibility with existing projects that test it. Also set the
EMBARCADERO indicator for newer toolchains.
Peter Kümmel
Bill Hoffman
Brad King
Patrick Gansterer
Kitware Robot
David Cole
Stephen Kelly
Charlie Sharpsteen
Modestas Vainius
Kashif Rasul
Alex Neundorf