The try_compile command builds the cmTryCompileExec executable using the
cmTryCompileExec/fast target with Makefile generators in order to save
time since dependencies are not needed. However, in project mode the
command builds an entire source tree that may have dependencies.
Therefore we can use the /fast target approach only in one-source mode.
In cmMakefile we save all invoked commands so that FinalPass can be
called on them later. Most commands have no final pass, so we should
keep only the few that do.
Previously each new variable scope (subdirectory or function call) in
the CMake language created a complete copy of the key->value definition
map. This avoids the copy using transitive lookups up the scope stack.
Results of queries answered by parents are stored locally to maintain
locality of reference.
The class cmDefinitions replaces cmMakefile::DefinitionsMap, and is
aware of its enclosing scope. Each scope stores only the definitions
set (or unset!) inside it relative to the enclosing scope.
In CMake 2.6.3 and below we silently accepted duplicate build
directories whose build files would then conflict. At first this was
considured purely a bug that confused beginners but would not be used in
a real project. In CMake 2.6.4 we explicitly made it an error.
However, some real projects took advantage of this as a "feature" and
got lucky that the subtle build errors it can cause did not occur.
Therefore we need a policy to deal with the case more gracefully.
See issue #9173.
Previously we rejected all preprocessor definition values containing
spaces for the VS6 IDE generator. In fact VS6 does support spaces but
not in combination with '"', '$', or ';', and only if we use the sytnax
'-DNAME="value with spaces"' instead of '-D"NAME=value with spaces"'.
Now we support all definition values that do not have one of these
invalid pairs. See issue #8779.
The add_definitions() command and COMPILE_DEFINITIONS dir/tgt/src
properties support preprocessor definitions with values. Previously
values were not supported in the VS6 generator even though the native
tool supports them. It is only values with spaces that VS6 does not
support. This enables support and instead complains only for values
with spaces. See issue #8779.
This moves code which generates ADD_TEST and SET_TESTS_PROPERTIES calls
into CTestTestfile.cmake files out of cmLocalGenerator and into a
cmTestGenerator class. This will allow more advanced generation without
cluttering cmLocalGenerator. The cmTestGenerator class derives from
cmScriptGenerator to get support for per-configuration script
generation (not yet enabled).
The second argument of add_subdirectory must name a unique binary
directory or the build files will clobber each other. This enforces
uniqueness with an error message.
This defines global, directory, and target properties
RULE_LAUNCH_COMPILE, RULE_LAUNCH_LINK, and RULE_LAUNCH_CUSTOM. Their
values specify 'launcher' command lines which are prefixed to compile,
link, and custom build rules by Makefile generators.
This teaches cmMakefile::GetProperty and cmake::GetProperty methods to
return NULL when the property name is NULL, making them more robust and
consistent with the behavior of cmTarget::GetProperty.
Isolation of policy changes inside scripts is important for protecting
the including context. This teaches include() and find_package() to
imply a cmake_policy(PUSH) and cmake_policy(POP) around the scripts they
load, with a NO_POLICY_SCOPE option to disable the behavior. This also
creates CMake Policy CMP0011 to provide compatibility. See issue #8192.
This teaches functions and macros to use policies recorded at creation
time when they are invoked. It restores the policies as a weak policy
stack entry so that any policies set by a function escape to its caller
as before.
A 'weak' poilcy stack entry responds normally to queries. However,
setting a policy in a weak entry will recursively set the policy in the
next entry too. This also gives the internal interface to create a weak
entry the option to provide an initial PolicyMap for it.
This creates cmMakefile::PolicyPushPop to push and pop policy scope
automatically. It also enforces balanced push/pop pairs inside the
scope it handles.
This defines PolicyMap as a public member of cmPolicies. Its previous
role as a policy stack entry is now called PolicyStackEntry and
represented as a class to which more information can be added later.
If a logical block terminates with mismatching arguments we previously
failed to remove the function blocker but replayed the commands anyway,
which led to cases in which we failed to report the mismatch (return
shortly after the ending command). The recent refactoring of function
blocker deletion changed this behavior to produce an error on the ending
line by not blocking the command. Furthermore, the function blocker
would stay in place and complain at the end of every equal-level block
of the same type.
This teaches CMake to treat the begin/end commands (if/endif, etc.) as
correct and just warns when the arguments mismatch. The change allows
cases in which CMake 2.6.2 silently ignored a mismatch to run as before
but with a warning.
This centralizes construction of the error message for an unclosed
logical block (if, foreach, etc.). We record the line at which each
block is opened so it can be reported in the error message.
This uses a stack of 'barriers' to efficiently divide function blockers
into groups corresponding to each input file. It simplifies detection
of missing block close commands and factors it out of ReadListFile.
When a function blocker decides to remove itself we previously removed
it at every return point from the C++ scope in which its removal is
needed. This teaches function blockers to transfer ownership of
themselves from cmMakefile to an automatic variable for deletion on
return. Since this removes blockers before they replay their commands,
we no longer need to avoid running blockers on their own commands.
Previously bad arguments to an if() or elseif() would cause some
subsequent statements in the corresponding block to execute. This
teaches CMake to stop processing commands with a fatal error. It also
provides context to bad elseif() error messages.
The documentation of cmake_policy PUSH and POP states that they must
always match. Previously we enforced this only for the top scope of
each CMakeLists.txt file. This enforces the requirement for all files.
This creates the variable CMAKE_VERSION containing the full version of
cmake in "major.minor.patch" format. It is particularly useful with the
component-wise version comparison provided by the if() command.
Previously we stored a vector of tests to preserve their order.
Property set/get operations would do a linear search for matching tests.
This uses a map to efficiently look up tests while keeping the original
order with a vector for test file generation.
The cmMakefile::DefineFlagsOrig ivar was created to help preserve the
old DEFINITIONS property behavior now that definitions are moved from
DefineFlags to the COMPILE_DEFINITIONS directory property. This fixes
propagation of the original value into subdirectories.
After creating a utility target with AddUtilityCommand, return a pointer
to the cmTarget instance so the caller may further modify the target as
needed.
If the arguments to a command fail to parse correctly due to a syntax
error, the command should not be invoked. This avoids problems created
by processing of commands with bad arguments. Even though the build
system will not be generated, the command may affect files on disk that
persist across CMake runs.
Previously error messages produced by parsing of command argument
variable references, such as bad $KEY{VAR} syntax or a bad escape
sequence, did not provide good context information. Errors parsing
arguments inside macro invocations gave no context at all. Furthermore,
some errors such as a missing close curly "${VAR" would be reported but
build files would still be generated.
These changes teach CMake to report errors with good context information
for all command argument parsing problems. Policy CMP0010 is introduced
so that existing projects that built despite such errors will continue
to work.
This introduces the unset() command to make it easy to unset CMake
variables, environment variables, and CMake cache variables. Previously
it was not even possible to unset ENV or CACHE variables (as in
completely remove them). Changes based on patch from Philip Lowman.
See issue #7507.
The compatibility check to allow linking to modules should test for
CMake 2.2, not the unreleased 2.3. See issue #7500. Furthermore, the
message should be more clear about fixing the code instead of setting
CMAKE_BACKWARDS_COMPATIBILITY unless one is just trying to build an
existing project.
In the future some policies may be set to REQUIRED_IF_USED or
REQUIRED_ALWAYS. This change clarifies the error messages users receive
when violating the requirements.
- The property tracks the value formed by add_definitions
and remove_definitions command invocations.
- The string should be maintained for use in returning for the
DEFINITIONS property value.
- It is no longer used for any other purpose.
- The DEFINITIONS property was recently documented as deprecated.
- See bug #7239.
- Fix documentation of get_directory_property command.
- Convert its list of computed directory properties to be
defined/documented directory properties.
- CMake 1.8 and below did not do the check but could get in
infinite loops due to the local generate step.
- CMake 2.0 added the check but failed to perform it in directories
with no targets (see bug #678).
- CMake 2.2 removed the local generate which fixed the problem but
did not remove the check.
- Between CMake 2.4 and 2.6.0rc6 the check was fixed to work even
when no targets appear in a directory (see bug #6923).
- Bottom line: the check is no longer needed.
- Message for missing cmake_minimum_required is not issued
until the end of processing the top CMakeLists.txt file
- During processing a cmake_policy command may set behavior
- OLD behavior is to silently ignore the problem
- NEW behavior is to issue an error instead of a warning
- Add cmListFileBacktrace to record stack traces
- Move main IssueMessage method to the cmake class instance
(make the backtrace an explicit argument)
- Change cmMakefile::IssueMessage to construct a backtrace
and call the cmake instance version
- Record a backtrace at the point a target is created
(useful later for messages issued by generators)
- Remove CMP_0001 (no slash in target name) and restore
old CMAKE_BACKWARDS_COMPATIBILITY check for it
- Replace all checks of CMAKE_BACKWARDS_COMPATIBILITY
with cmLocalGenerator::NeedBackwardsCompatibility calls
- Create new CMP_0001 to determine whether or not
CMAKE_BACKWARDS_COMPATIBILITY is used.
(old = use, new = ignore)
- Show CMAKE_BACKWARDS_COMPATIBILITY in cache only when
CMP_0001 is set to OLD or WARN
- Update documentation of cmake_policy and cmake_minimum_required
to indicate their relationship and the 2.4 version boundary
- When no cmake policy version is set in top level makefile
implicitly call cmake_policy(VERSION 2.4) which restores
CMAKE_BACKWARDS_COMPATIBILITY and other 2.4 compatibility
- Fix tests MakeClean and Preprocess to call
cmake_policy(VERSION 2.6) because they depend on new policies
- Add cmMakefile methods IssueError and IssueWarning
- Maintain an explicit call stack in cmMakefile
- Include context/call-stack info in messages
- Nested errors now unwind the call stack
- Use new mechanism for policy warnings and errors
- Improve policy error message
- Include cmExecutionStatus pointer in call stack
so that errors deeper in the C++ stack under
a command invocation will become errors for the
command
- Re-enable enforcement in cmMakefile::EnforceUniqueName
- Improve error message to help user resolve the problem
- Fix Modules/CTestTargets.cmake to not duplicate testing targets
- Move commands used by the changes to Modules/CTestTargets.cmake
to build during bootstrap: DEFINE_PROPERTY, GET_PROPERTY
- Error if imported target is involved in conflict
- Error for non-imported target conflict unless
CMAKE_BACKWARDS_COMPATIBILITY <= 2.4
- Include OUTPUT_NAME property in error message
- Update add_executable and add_library command documentation
- Created cmExportFileGenerator hierarchy to implement export file generation
- Installed exports use per-config import files loaded by a central one.
- Include soname of shared libraries in import information
- Renamed PREFIX to NAMESPACE in INSTALL(EXPORT) and EXPORT() commands
- Move addition of CMAKE_INSTALL_PREFIX to destinations to install generators
- Import files compute the installation prefix relative to their location when loaded
- Add mapping of importer configurations to importee configurations
- Rename IMPORT targets to IMPORTED targets to distinguish from windows import libraries
- Scope IMPORTED targets within directories to isolate them
- Place all properties created by import files in the IMPORTED namespace
- Document INSTALL(EXPORT) and EXPORT() commands.
- Document IMPORTED signature of add_executable and add_library
- Enable finding of imported targets in cmComputeLinkDepends
"Command options() is not scriptable" is IMO better to understand than
"Command options not scriptable" (with all uppercase commands it was easier to see)
Alex
cmMakefile.cxx, but now in the platform files and are now valid for the
target platform, not the host platform.
New variables CMAKE_HOST_WIN32, CMAKE_HOST_UNIX, CMAKE_HOST_APPLE and
CMAKE_HOST_CYGWIN have been added in cmMakefile.cxx (...and have now to be
used in all cmake files which are executed before
CMakeSystemSpecificInformation.cmake is loaded). For compatibility the old
set is set to the new one in CMakeDetermineSystem.cmake and reset before the
system platform files are loaded, so custom language or compiler modules
which use these should still work.
Alex
working, for both the result was always empty, since
cmMakefile::GetProperty() recognized it as a special property, constructed a
correct return value and called cmMakefile::SetProperty() with this list of
directories, which then didn't actually set the property, but applied it to
the internal vector of include/link directories. The following
getPropertyValue in cmMakefile::GetProperty() then still didn't find it and
returned nothing. Now for all special property the static string output is
used and its content is returned. I'm not sure it is the right way to fix
this problem but at least it seems to work and it fixes the Paraview3 build
Alex
what autoconf does. This makes porting software from autoconf to cmake
easier, since it's easier to diff the resulting config headers.
Now the following
#cmakedefine HAVE_STRING_H 1
#cmakedefine HAVE_STRLCAT 1
produce:
#define HAVE_STRING_H 1
/* #undef HAVE_STRLCAT */
whereas before they produced:
#define HAVE_STRING_H 1
/* #undef HAVE_STRLCAT 1 */
Since it's commented out anyway, it's now change in behaviour.
Alex
something like this:
ENABLE_LANGUAGE(ASM-ATT)
IF(CMAKE_ASM-ATT_COMPILER_WORKS)
... do assembler stufff
ELSE(CMAKE_ASM-ATT_COMPILER_WORKS)
... fallback to generic C/C++
ENDIF(CMAKE_ASM-ATT_COMPILER_WORKS)
Alex
CMake-SourceFile2-bp and CMake-SourceFile2-b-mp1 to trunk. This
commit is surrounded by tags CMake-SourceFile2-b-mp1-pre and
CMake-SourceFile2-b-mp1-post on the trunk.
The changes re-implement cmSourceFile and the use of it to allow
instances to be created much earlier. The use of cmSourceFileLocation
allows locating a source file referenced by a user to be much simpler
and more robust. The two SetName methods are no longer needed so some
duplicate code has been removed. The strange "SourceName" stuff is
gone. Code that created cmSourceFile instances on the stack and then
sent them to cmMakefile::AddSource has been simplified and converted
to getting cmSourceFile instances from cmMakefile. The CPluginAPI has
preserved the old API through a compatibility interface.
Source lists are gone. Targets now get real instances of cmSourceFile
right away instead of storing a list of strings until the final pass.
TraceVSDependencies has been re-written to avoid the use of
SourceName. It is now called TraceDependencies since it is not just
for VS. It is now implemented with a helper object which makes the
code simpler.
write generators for IDE projects, which use already existing makefiles
(current the kdevelop generator)
-first stept of the export interface, iniitial export() command
-more replacements for the FIND_XXX docs
Alex
"imported" executable target. This can then be used e.g. with
ADD_CUSTOM_COMMAND() to generate stuff. It adds a second container for
"imported" targets, and FindTarget() now takes an additional argument bool
useImportedTargets to specify whether you also want to search in the
imported targets or only in the "normal" targets.
Alex
-add a RESULT_VARIABLE to INCLUDE()
-add CMAKE_TOOLCHAIN_FILE for specifiying your (potentially crosscompiling) toolchain
-have TRY_RUN() complain if you try to use it in crosscompiling mode (which were compiled but cannot run on this system)
-use CMAKE_EXECUTABLE_SUFFIX in TRY_RUN(), probably TRY_RUN won't be able to
run the executables if they have a different suffix because they are
probably crosscompiled, but nevertheless it should be able to find them
-make several cmake variables presettable by the user: CMAKE_C/CXX_COMPILER, CMAKE_C/CXX_OUTPUT_EXTENSION, CMAKE_SYSTEM_NAME, CMAKE_SYSTEM_INFO_FILE
-support prefix for GNU toolchains (arm-elf-gcc, arm-elf-ar, arm-elf-strip etc.)
-move ranlib on OSX from the file command to a command in executed in cmake_install.cmake
-add support for stripping during install in cmake_install.cmake
-split out cl.cmake from Windows-cl.cmake, first (very incomplete) step to support MS crosscompiling tools
-remove stdio.h from the simple C program which checks if the compiler works, since this may not exist for some embedded platforms
-create a new CMakeFindBinUtils.cmake which collects the search fro ar, ranlib, strip, ld, link, install_name_tool and other tools like these
-add support for CMAKE_FIND_ROOT_PATH for all FIND_XXX commands, which is a
list of directories which will be prepended to all search directories, right
now as a cmake variable, turning it into a global cmake property may need
some more work
-remove cmTestTestHandler::TryExecutable(), it's unused
-split cmFileCommand::HandleInstall() into slightly smaller functions
Alex
add_custom_target() as COMMAND, and cmake will recognize them and replace
them with the actual output path of these executables. Also the dependency
will be added automatically. Test included.
ENH: moved TraceVSDependencies() to the end of GlobalGenerator::Configure(),
so it is done now in one central place
Alex
the stack (usually CMakeCInformation.cmake and CMakeCXXInformation.cmake
which both put Linux-gcc.cmake on the stack without removing it again:
INCLUDE(... OPTIONAL) )
STYLE: better readable output formatting of the listfile stack, now in the
same order as in gdb or with include files
Alex
fix many bugs related to target names being computed inconsistently.
- Centralized computation of a target's file name to a method in
cmTarget. Now that global knowledge is always available the
*_CMAKE_PATH cache variables are no longer needed.
- Centralized computation of link library command lines and link
directory search order.
- Moved computation of link directories needed to link CMake targets
to be after evaluation of linking dependencies.
This also removed alot of duplicate code in which each version had its
own bugs.
This commit is surrounded by the tags
CMake-TargetNameCentralization1-pre
and
CMake-TargetNameCentralization1-post
so make the large set of changes easy to identify.
- Fixed CollapseFullPath to work on relative paths with base paths
not in the current working directory.
- INCLUDE command now supports relative paths (using above fix).
- Added ABSOLUTE option to GET_FILENAME_COMPONENT command to
unwind symlinks and relative paths.
- Fixed libName_EXPORTS macro definition to be valid C identifier.
- Added DEFINE_SYMBOL target propterty for customizing the export symbol.
- Implemented LINK_FLAGS target propterty for libraries in VC6 and VC7.
Several of these fixes were contributed by Gareth Jones.
Brad King
Bill Hoffman
Ken Martin
Alexander Neundorf
Amitha Perera
Andy Cedilnik