Teach the RunCMake.ObjectLibrary test to verify that languages used in
an OBJECT library are propagated to targets that use it so that the
languages can be included in link analysis.
Add "RunCMake.ObjectLibrary" test to verify that unsupported use cases
are rejected with errors:
* An OBJECT library may not reference another object library
* An OBJECT library may not be referenced in target_link_libraries
* An OBJECT library may not contain non-compiling sources
* An OBJECT library may not have pre/post build/link commands
* An OBJECT library may not be installed, exported, or imported
Also verify that invalid $<TARGET_OBJECTS:...> expressions are
diagnosed.
Add "ObjectLibrary" test to build and use OBJECT libraries. Build
multiple object libraries in separate directories with different flags.
Use a custom command to generate a source file in one OBJECT library.
Reference the OBJECT libraries for inclusion in a STATIC library, a
SHARED library, and an EXECUTABLE target. Use the static and shared
libraries each in executables that end up using the object library
symbols. Verify that object library symbols are exported from the
shared library.
55b2aa8 Use generalized RunCMake test infrastrucure for build_command test
eb33000 Use generalized RunCMake test infrastrucure for find_package test
42a81e7 Add stronger infrastructure for CMake-only tests
The CMakeCommands.build_command test performs output/error checking
so move it over to RunCMake to re-use the generalized infrastrucure.
This is the only test left using Tests/CMakeCommands/CMakeLists.txt
so remove it.
The CMakeOnly directory added by commit 9a20abf0 (Add infrastructure for
CMake-only tests, 2012-01-11) was sufficient only for tests that always
run CMake to successfully configure a project. Later commit eeaaffcb
(find_package: Test error and warning messages in failure cases,
2012-02-28) added a sample test that covers failure cases.
Generalize the above to create new "RunCMake" test infrastructure that
can run CMake multiple times for a single project with different
variations and check for expected result/stdout/stderr. Allow for both
successful and failing CMake project configuration cases. This will be
useful to test error messages and failure behavior.
b28e7fa VS6: Avoid SBCS test on VS6 (#12189)
df19b9c VS6: Avoid _MBCS define when _SBCS is defined (#12189)
ba89e92 Visual Studio: Allow setting Single Byte Character Set (#12189)
d662dff Fix shadowed variable warning on dashboard results
f66e735 Fix compiler warning reported on older Borland dashboard.
d90eed4 Fix compiler error reported on older Borland dashboard.
8233636 Update the documentation regarding INCLUDE_DIRECTORIES.
d899eb7 Call ExpandVariablesInString for each target's INCLUDE_DIRECTORIES
c21db87 Make search paths ordered and unique
22021f0 Remove cmMakefile::GetIncludeDirectories
9106b56 Extract and use the INCLUDE_DIRECTORIES target properties.
840509b Keep the INCLUDE_DIRECTORIES target property up to date.
a4d5f7b Add API to get the ordered includes for a target.
8adaee2 CMake: Eliminate cmMakefile::IncludeDirectories
7620932 Remove include flags memoization.
97a5faa Make it safe to call this method without creating duplicates.
edd5303 Refactor GetIncludeFlags to take includes instead of fetching them
The function configure_package_config_file() may be used instead of
configure_file() for generating the Config.cmake files for installation,
they help to make those files relocatable.
Alex
The previous commit, df19b9ca, assumed that the corresponding
_UNICODE functionality in the VS6 generator actually worked.
That turns out not to be the case. Unicode definition does not
actually suppress _MBCS definition, so neither does this new
code...
Don't test it here, since the patch submitter for _SBCS does
not need VS6 support.
If somebody needs _UNICODE and _SBCS support to suppress the
definition of _MBCS in the VS6 generator, it is work yet to do.
Patches welcome.
4689eed reflect that the QtAutomoc depends on QtGui
ab9661c Remove QtGui dependency in Qt4Deploy test and verify QtSql existance.
52e8279 Fix for Qt4Deploy on some test machines.
672e3bb Add test for DeployQt4.cmake
4853e1e Fix plugin installation issues.
35cbf23 Ensure libs are passed to BundleUtilities.
0ac1535 Fix bad plugin paths.
a2123e8 Fix mismatched arguments.
fc6f340 Don't use QT_LIBRARIES_PLUGINS by default.
The MSYS cvs tool interprets "c:/" as a "machine:" name for SSH. Detect
the MSYS cvs by looking for the string "msys" in the executable file
itself. Then convert the repo path to an MSYS path such as "/c/...".
Fix both the CTest.UpdateCVS and ExternalProject tests that use local
CVS repositories.
eeaaffc find_package: Test error and warning messages in failure cases
52dffb9 Merge branch 'test-CMakeCommands' into find_package-improve-messages
d365104 find_package: Optionally warn when implicitly using Config mode
31ead5f find_package: Reject mixed use of MODULE- and CONFIG-only options
6d83083 find_package: mention requested version number in error message
9c39bbd find_package: add CONFIG mode keyword alias for NO_MODULE
f310f67 find_package: add MODULE mode to use only Find-modules
7d67dcf find_package: improve error message when no Find module is present
978d89b find_package: rename NoModule to UseFindModules
We no longer support CVS checkouts from the Git repository.
Drop the case from the CheckSourceTree test. This will also
prevent the test from running and failing when CVS is found
but Git is not.
Add a "CMakeCommands.find_package" test to run CMake on a bunch of cases
in which find_package fails. Check that the process return code and
warning/error messages are as expected. Record expected test output in
corresponding files for reference by the check. These files will also
serve as a reference for the message text in each case.
${CMake_SOURCE_DIR} and ${CMake_BINARY_DIR} cannot be embedded into regex
directly. If they contain special regex metacharacters like +, the regex
will break. So just escape such metacharacters with a backslash before
embedding the path into the regex.
The issue affected the following tests: CTestTestConfigFileInBuildDir1 and
CTestTestConfigFileInBuildDir2.
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
35c48e1 Check*.cmake: Expand imported targets in CMAKE_REQUIRED_LIBRARIES
61cb4ea bootstrap: move while() and endwhile() into the bootstrap build
c9f2886 -don't pull in CheckTypeSize.cmake from the cmake which is being built
628f365 -remove trailing whitespace
Add the function cmake_expand_imported_targets() to expand imported
targets in a list of libraries into their on-disk file names for a
particular configuration. Adapt the implementation from KDE's
HANDLE_IMPORTED_TARGETS_IN_CMAKE_REQUIRED_LIBRARIES which has been in
use for over 2 years. Call the function from all the Check*.cmake
macros to handle imported targets named in CMAKE_REQUIRED_LIBRARIES.
Alex
For all current build machines the modules FindPkgConfig, FindFreetype, and
FindLibXslt return a version number. Enforce this to early catch when this
is not always the case.
This did not work because find_library() did only treat the given name as
complete filename if is matched "PREFIX.*SUFFIX":
find_library(MYLIB libfoo.so.2)
Now it is also taken as a whole if the name matches "PREFIX.*SUFFIX\..*".
If a variable exists called CMAKE_PROJECT_<projectName>_INCLUDE,
the file pointed to by that variable will be included as the last step
of the project command.
For Visual Studio using the Preprocessor Define _SBCS. This behavior
is similar to the way that _UNICODE and _MBCS work already.
Added tests to confirm this behavior.
We do not yet support "make install" in the external project case.
Document this explicitly in the interface. Require the caller to use an
option to "disable" the unsupported behavior. This will allow us to add
the behavior by default in the future without clobbering existing
projects that handle the installation themselves.
cmake_add_fortran_directory uses imported targets when using the
mingw fortran compiler. This change makes those targets global
in scope so they act just like the real targets that exist when
a fortran compiler exists and regular add_subdirectory is used.
The SunPro compiler does not add the fortran runtime library when
creating a shared fortran library. Link to the SunPro Fortran runtime
libraries explicitly.
Fix the implementation to allow full paths with spaces. Change the
interpretation of relative paths to be with respect to the current binary
directory. This matches the convention used in ExternalProject. Test
both full and relative paths in the VSGNUFortran test.
This patch adds a new module that allows for easy integration of MinGW
gfortran and the Visual Studio compiler. It is done in a function called
cmake_add_fortran_subdirectory. The patch also includes a test for this
feature.
Define a "check_language(<lang>)" macro to test whether <lang> can be
enabled. Cache the result in CMAKE_<lang>_COMPILER. Add a test case
covering expected results.
ed1b126 CMakeOnly.AllFindModules: require version for some modules
2dee929 CMakeOnly.AllFindModules: suppress two modules from testing
3c4b4ff CMakeOnly.AllFindModules: always check FindQt
9d72b25 CMakeOnly.AllFindModules: clean up the Qt3/Qt4 code
If CXX or Fortran is enabled before C then the values of
CMAKE_SHARED_MODULE_C_FLAGS
CMAKE_SHARED_MODULE_CREATE_C_FLAGS
may not be available. On platforms where MODULE library (plugin) creation
is the same as SHARED library creation initialize the MODULE creation
flags from the SHARED creation flags of the matching language instead of
assuming that C has been enabled first.
Teach the COnly and CxxOnly tests to build MODULE libraries. The latter
covers this specific case.
Causes compiler modules (currently only GNU) to set a
CMAKE_DEPFILE_FLAGS_${lang} variable, which communicates to
the generator the flags required to cause the compiler to create
dependency files.
98d2031 Fix BundleUtilities test failure with space in build path.
36d6641 Fix new BundleUtilities test failure on Mac 10.4.x
0d96dec GetPrerequisites: Add test for @rpath support.
880139a GetPrerequisites: Add support for @rpath on Mac OS X.
9a6b102 GetPrerequisites: Add support for @rpath on Mac OS X.
8d83043 AllFindModules test: also check Qt3 modules if Qt4 is not found
e797e7f AllFindModules test: keep complete output
ec631d5 add a test that loops through most Find* modules
This removes some useless checking. The results of these things are never
properly checked so they should not count as testcases. At the end they only
needlessly clutter the output.
6856b4d Merge topic 'link-shared-depend-cycle-issue-12647' into check_symbol_exists
8e1f376 add a test for Check{,CXX}SymbolExists
813eca6 CheckSymbolExists: force the compiler to keep the referenced symbol
0df1942 Detect SGI MIPSpro compiler version with its id
a5e892c Document compiler version macro formats used for detection
d7c6f41 Detect HP compiler version with its id
3dd9fa9 Detect SunPro compiler version with its id
c198730 Detect Watcom compiler version with its id
5899b98 Detect Clang compiler version with its id
b8cfa65 Detect PGI compiler version with its id
6dae666 Detect IBM XL compiler version with its id
4080d55 Detect Borland compiler version with its id
2cc205a Detect Intel compiler version with its id (#11937)
a6d83cc Detect MSVC compiler version with its id
a662855 Detect GNU compiler version with its id (#6251)
fa7141f Add framework to detect compiler version with its id (#12408)
Since commit 183b9509 (Follow all dependencies of shared library private
dependencies, 2011-12-14) we honor LINK_INTERFACE_LIBRARIES when
following dependent shared libraries. The link interface properties may
form a cycle if set incorrectly by a project. Furthermore, the property
LINK_DEPENDENT_LIBRARIES may form a cycle if set incorrectly by hand
(though CMake should never generate one). In either case, do not follow
the cycle forever when following the dependent shared library closure.
We only need to add dependency edges to the constraint graph once.
Add "LinkInterfaceLoop" test to cover this case.
Some tests only need to run CMake to configure and generate a build
tree, but not actually perform the build. Add a new "Tests/CMakeOnly"
directory dedicated for this purpose. Add a helper script to drive each
test by creating a fresh build tree and running CMake on it. Add macro
"add_CMakeOnly_test" to help create tests using the script.
53d31c2 complex: Remove unused option to test CMakeLib
c1789e6 complex: Remove test dependence on cmSystemTools
569cee1 complex: Move cmSystemTools::UpperCase test to CMakeLibTests
49d6dd6 complex: Simplify test for single-character exe name
76ac88b complex: Move GeneratedFileStream test to CMakeLibTests
137e597 complex: Remove dynamic loader tests
6337920 complex: Sync Tests/ComplexOneConfig with Tests/Complex
6a75821 complex: Remove ancient unused ComplexRelativePaths test
This test belongs in the CMakeLibTests test driver executable which
correctly links to CMakeLib. Fix incorrect library link order in the
Complex tests exposed by this change.
The two test sources must remain identical. Apply to ComplexOneConfig
the change that commit f578381e (Fix vs2010 project generation error
when HEADER_FILE_ONLY is set, 2010-12-20) made to Complex.
This adds a test that uses two project commands in the same CMakeLists.txt
file. It also adds a fix so that cmake --build will work in that case.
The fix sets the name of the last project command in the top level
CMakeLists.txt in the cache variable CMAKE_PROJECT_NAME. This variable
is used by cmake --build to find the project name.
Since commit 38aab379 (Set CMAKE_<lang>_COMPILER_ID for VS generators,
2011-09-02) the VS IDE generators set the C and C++ compiler id to MSVC
and the Fortran compiler id to Intel. This caused the Fortran test to
fail compatible compiler detection because the if() test
"${CMAKE_C_COMPILER_ID}" MATCHES "MSVC"
is evaluated as the "var MATCHES regex" signature which evaluates the
compiler id "MSVC" as a variable which is defined to 1 which does not
match "MSVC".
Combine tests for non-identical but compatible compiler vendors into a
single regex match whose left hand side will not be defined as a
variable.
In cmComputeLinkDepends we compute the transitive closure of private
shared library dependencies. When a shared library is added to this
closure we must follow all of its dependencies whether they are private
or public. Previously we only followed the private dependencies. Fix
the implementation to follow the public dependencies too. Also extend
the ExportImport test to cover this case.
automoc now defaults to strict mode, also with Qt4, i.e. it behaves as
the documentation says by default. I also inverted the switch
CMAKE_AUTOMOC_STRICT_MODE to CMAKE_AUTOMOC_RELAXED_MODE.
Docs and test adapted accordingly.
Alex
Teach CMakePlatformId.h to construct an "INFO:compiler_version[]" string
literal from macros COMPILER_VERSION_(MAJOR|MINOR|PATCH|TWEAK) to be
defined in CMake(C|CXX)CompilerId.(c|cpp) for each compiler. Provide
conversion macros DEC() and HEX() to decode decimal or hex digits from
integer values. Parse the version out of the compiler id binary along
with the other INFO values already present.
Store the result in variable CMAKE_<LANG>_COMPILER_VERSION in the format
"major[.minor[.patch[.tweak]]]". Save the value persistently in
CMake(C|CXX)Compiler.cmake in the build tree. Document the variable for
internal use since we do not set it everywhere yet.
Report the compiler version on the compiler id result line e.g.
The C compiler identification is GNU 4.5.2
Report CMAKE_(C|CXX)_COMPILER_(ID|VERSION) in SystemInformation test.
ae62a1c Test CMAKE_GNUtoMS option in ExportImport on MinGW and MSys
afb00fe Add CMAKE_GNUtoMS option to convert GNU .dll.a to MS .lib
61e8629 Factor makefile generator link rule lookup into helper function
a603250 Load platform files that need to know the ABI when possible
ecd8414 Fortran: Detect pointer size in gfortran on MinGW
This test will fail to get a proper version number if running on a (e.g.
German) localized system because the regular expression used to match the
Subversion version output does not match. Instead of duplicating code just
remove the local test altogether and use the version that FindSubversion.cmake
already detects.
Since the export() command needs to know the final location of a target
in the build tree we cannot allow properties affecting the location or
name of a target file to be set after the target is passed to export().
Fix a violation of this rule in the SimpleInstall test.
ac2e45d Provide std::ios_base typedef on GCC < 3
28c46ca cmNewLineStyle: Use cmStandardIncludes.h
75e83e9 cmNewLineStyle: Remove trailing comma in enum
be6502c bootstrap: Include cmNewLineStyle in build
a087490 Add NEWLINE_STYLE option to configure_file (#3957)
537020f Tests: Nudge MFC test to pass on VS 6 dashboards (#11213)
51f442e VS11: Update InstallRequiredSystemLibraries.cmake for VS11 (#11213)
d85ab7a Tests: Add environment logging to the MFC test (#11213)
011694c VS10: Use expected values for UseOfMfc (#11213)
a2e6d24 Tests: Fix MFC test to work with VS 10 and later (#11213)
c71f7ab Tests: Avoid MFC test automatically for Watcom WMake builds (#11213)
a42e3f2 Tests: Fix MFC test for old vs6 dashboards (#11213)
b297da6 Tests: Fix MFC test w/ Make-based generators (#11213)
54595e6 Tests: Avoid MFC test automatically for VCExpress builds (#11213)
36b0c43 Tests: Add the MFC test (#11213)
InstallRequiredSystemLibraries does not install any dlls when
used with VS 6 dashboards. Modify the ValidateBuild script to
expect only 1 file when building with VS 6.
Using "-DCMAKE_INSTALL_PREFIX=<INSTALL_DIR>" does not work when
<INSTALL_DIR> evaluates to a long enough string. However, using
"-DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR>" does work, even with
the longer strings. So: make sure to include the ":PATH" when using
this construct with ExternalProject calls so that they may install
to the proper location on VS 6 builds. All existing calls that match
"CMAKE_INSTALL_PREFIX.*INSTALL_DIR" include the ":PATH" after this
commit.
By the way: https://twitter.com/DLRdave/status/134339505397309440
The mfc app in the test was generated by the VS 7.1 wizard,
and due to changes in VS since then, the values used for WINVER
and _WIN32_WINNT caused compile errors when built with VS 10
or later. Change them to values appropriate for targeting
Windows XP or later when building with VS 10 or later.
See http://msdn.microsoft.com/en-us/library/6sehtctf.aspx
for more info.
Brad King
Alex Neundorf
David Cole
Rolf Eike Beer
Bill Hoffman
Clinton Stimpson
Modestas Vainius
Stephen Kelly
Eric NOULARD
Aaron C. Meadows
Peter Collingbourne
Peter Kuemmel