73e9340 get_target_property: Error on non-existent target.
ab9f58f FindQt4: Ensure target exists before calling get_target_property.
37ebeb9 FindQt4: Fix use of get_target_property to use actual target name.
6aabb6a Genex: Use case-sensitive comparison for COMPILER_ID.
5bb53f6 cmTarget: Deprecate COMPILE_DEFINITIONS_ properties with a policy.
This is consistent with other similar expressions such as PLATFORM_ID,
and makes the CONFIGURATION expression obsolete.
Fix an off-by-one error in
GeneratorExpressionContent::EvaluateParameters exposed by a unit test.
Remove the test for 'bad' nullary use of $<CONFIG>.
Add a unit test to verify that $<CONFIG> and $<CONFIGURATION> have
the same value.
As a new feature it does not need to participate in CMP0024.
Store cmExportBuildFileGenerator instances which correspond to the
export(EXPORT) signature in a second map which does not own the
pointers. This avoids the need to add cmExportBuildFileGenerator
and dependencies to the bootstrap system.
Direct users of IMPORTED targets treat INTERFACE_INCLUDE_DIRECTORIES
as SYSTEM, after commit a63fcbcb (Always consider includes from IMPORTED
targets to be SYSTEM., 2013-08-29). It was intended that transitive
use of an IMPORTED target would have the same behavior, but that
did not work. The implementation processed only direct dependencies
in cmTarget::FinalizeSystemIncludeDirectories.
Implement transitive evaluation of dependencies by traversing the
link interface of each target in the link implementation.
Test that it is an error to read a number-compatible property to
determine the link implementation. An alternative would be to
consider the value to be "0", however, that is too arbitrary
given the use-cases of this feature. Values from this feature may
be used in setting a define, where "0" may have special or invalid
meaning and should be explicit.
If the dependent target sets the property to boolean false, ensure
that that appears in the debug report. Previously, the report
output contained whether the property was consistent among dependencies,
displaying 'TRUE', instead of the content of the property, which may
be 'FALSE'.
Return a std::pair from the consistentProperty method. This makes
it possible to make the return value for string types easier to
reason about. The return value of consistentProperty was previously
set to an empty static string to emulate a 'true' value for the caller
in commit 816b4a8a (cmTarget: Make consistentProperty
return consistent content., 2013-10-22). The pair makes the
consistency result properly typed.
Don't refer to 'both', but a 'mixture'. List all compatible interface
property types possible.
Add another test for a mixture of three compatibilities.
The include_directories() and add_compile_options() commands
should not append to the corresponding target property for IMPORTED
targets. This is already the case for add_definitions().
Teach the export command to handle export sets defined by invocations
of install(TARGETS ... EXPORT foo). This makes maintenance of targets
exported to both the build tree and install tree trivial.
The first regression resulted in endless looping due to unrun test
dependencies. The second regression prioritized all tests with dependencies
in serial test runs.
Added a new variable CPACK_WIX_PATCH_FILE that users can point at an
XML patch file. Fragments defined within the patch file will be inserted
at supported insertion points (currently Component, File and Directory).
Instead of running many small tests with many cmake projects, simply
compare the generated export header against a reference.
Remove the helper macros and the try_compiles which are duplicates
of the library build tests.
Commit b04f3b9a (Create make rules for INTERFACE_LIBRARY
targets., 2013-08-21) extended the makefile generator to create
build targets for INTERFACE_LIBRARY targets. No other generators
were extended with this feature.
This conflicts with the feature of whitelisting of target properties
read from INTERFACE_LIBRARY targets. The INTERFACE_* properties
of the INTERFACE_LIBRARY may legitimately contain TARGET_PROPERTY
generator expressions for reading properties from the 'head target'.
The 'head target' would be the INTERFACE_LIBRARY itself when creating
the build rules for it, which means that non-whitelisted properties
would be read.
The INTERFACE_LIBRARY type does not have any LOCATION at all, so
return early from GetMappedConfig. GetMappedConfig is called from
two locations, one of which already pre-checks the INTERFACE_LIBRARY
case. Remove that pre-check and handle that case inside the method
instead.
77f3772 cmTarget: Require a compatible INTERFACE_AUTOUIC_OPTIONS from dependencies.
2e60b5f cmTarget: Report origin of COMPATIBLE_INTERFACE properties.
Revert the origin-tracking infrastructure from commit 98093c45 (QtAutoUic:
Add INTERFACE_AUTOUIC_OPTIONS target property., 2013-11-20). Use the
compatibility-tracking for compatible strings instead.
If two different dependencies require different AUTOUIC_OPTIONS,
cmake will now appropriately issue an error.
Since commit fd6076d0 (Tests: Pass CMAKE_MAKE_PROGRAM instead of
--build-makeprogram, 2013-11-15) the ExportImport, Fortran, and
MacRuntimePath tests use the value of CMAKE_TEST_MAKEPROGRAM as the
CMAKE_MAKE_PROGRAM for their nested projects configurations.
Teach these tests to initialize CMAKE_TEST_MAKEPROGRAM when it is
not provided, such as when building the tests manually.
Commit 66b290e7 (export(): Process the export() command at generate
time., 2012-10-06 ) refactored export() so that it could evaluate
strings at generate-time. This was intended for evaluating target
properties, but that commit also removed a check for target
existence at configure-time. Restore that check and add a test for
this case.
98093c4 QtAutoUic: Add INTERFACE_AUTOUIC_OPTIONS target property.
02542b4 QtAutoUic: Handle new -include command line parameter.
1242f4e Genex: Add {UPPER,LOWER}_CASE and MAKE_C_IDENTIFIER.
754b321 QtAutogen: Use config without prefix in map key.
5838aba Export: Report error on relative include with genex.
7a3e45b Export: Prefix relative items with genexes in INSTALL_INTERFACE.
f088a32 Export: Process INSTALL_INTERFACE in INCLUDES DESTINATION.
9eedc85 Export: Process relative includes after genex evaluation.
80790f3 Export: Test existing behavior of exporting includes with genexes.
38afc82 target_include_directories: Allow relative path with genex
Transitively consume the property from linked dependents.
Implement configuration-specific support by following the pattern
set out for compile definitions and includes in cmQtAutoGenerators.
Implement support for origin-tracking with CMAKE_DEBUG_TARGET_PROPERTIES.
This is motivated by the needs of KDE, which provides a separate
translation system based on gettext instead of the Qt linguist
translation system. The Qt uic tool provides command line options
for configuring the method used to translate text, and to add an
include directive to the generated file to provide the method.
http://thread.gmane.org/gmane.comp.kde.devel.frameworks/7930/focus=7992
Implement the interface to provide the uic options as a usage-requirement
on the KI18n target, as designed for KDE.
Creates a hierarchy of WiX features from CPack components and component groups.
Switch to the FeatureTree UI in case components have been defined.
Handles the component REQUIRE and HIDDEN options
and the component group EXPANDED option.
Diagnostics which check the sanity of exported include paths
previously skipped over any path containing a generator expression.
Introduce a policy to issue an error message in such cases.
The export files created in the OLD behavior are not usable, because
they contain relative paths or paths to the source or build location
which are not suitable for use on installation. CMake will report an
error on import.
Code such as
target_include_directories(foo INTERFACE
$<INSTALL_INTERFACE:include$<FOO>>
)
should be treated as a relative directory, despite the genex, after
the INSTALL_INTERFACE is stripped away.
Previously, this would generate a relative directory on export, which
would be an error on import, so no policy is needed.
Code such as
install(TARGETS ...
INCLUDES DESTINATION $<INSTALL_INTERFACE:include>
)
should behave as if the INSTALL_INTERFACE wrapper were not present.
In code such as
install(TARGETS ...
INCLUDES DESTINATION $<FOO>include
)
the generator expressions are evaluated at generate-time. Delay
determining whether each entry is a relative path until after
the generator expressions are evaluated. Such relative paths
are based relative to the CMAKE_INSTALL_PREFIX.
Treat paths which are relative and which contain a generator
expression which is not at the beginning as relative to the
source directory.
This matches the behavior of paths which are relative but contain
no generator expression at all.
Previously this would generate a relative path with the IMPORTED
target on export(), which would be a reported as a non-existent
path on import. If used directly in the buildsystem, it would be
reported as a relative path, which is also an error. There is no
need for a policy in this case.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.
If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.
This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.
If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.
The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
4cce44b Help: Document the CMAKE_MAKE_PROGRAM variable in more detail
558c74d VS: Switch to internal CMAKE_MAKE_PROGRAM lookup by generators
5229f2d Tests: Do not use an explicit make program for VS generators
72dd738 Tests: Fix MFC test heuristic for empty CMAKE_TEST_MAKEPROGRAM
fd6076d Tests: Pass CMAKE_MAKE_PROGRAM instead of --build-makeprogram
68031ab Tests: Configure SubProject-Stage2 test more robustly
003d10c Tests: Simplify VSExcludeFromDefaultBuild configuration
e47d934 Tests: Simplify VSProjectInSubdir configuration
e965cb1 Tests: Simplify CTest.BuildCommand.ProjectInSubdir configuration
72bf255 Tests: Pass --build-options to every test
4d1d772 ctest: Teach --build-options to allow zero options
96966b5 ctest: Make the --build-makeprogram optional for --build-and-test
91a0211 Simplify some calls to cmGlobalGenerator::Build
123a060 Teach GenerateBuildCommand to find its own make program
5f5c92b VS: Add internal APIs to find MSBuild, devenv/VCExpress, and msdev
4ac75fd Prefer CMAKE_MAKE_PROGRAM over CMAKE_BUILD_TOOL (#14548)
...
Teach add_custom_target to check the policy too. Extend the policy to
disallow reserved target names that we use for builtin targets like
"all".
Extend the RunCMake.CMP0037 test to cover these cases.
Pass the CMAKE_TEST_MAKEPROGRAM, if any, to each test at CMake time in
the CMAKE_MAKE_PROGRAM cache entry. Pass the CMAKE_TEST_MAKEPROGRAM
into the ExportImport, Fortran, and MacRuntimePath tests so that they
may do the same for the nested project configurations.
Now "ctest --build-and-test" can get the make program from the test
build tree cache, so drop the explicit --build-makeprogram.
Fix the condition that adds the test to check CMAKE_TEST_GENERATOR
rather than the tools used to build CMake. Drop the test on Ninja
because the generator does not support subproject generation anyway.
Stop using the general build_generator_args and pass the
--build-generator options explicitly. Also pass --build-makeprogram
explicitly when CMAKE_TEST_MAKEPROGRAM is available because there is no
CMakeCache.txt in the test project subdirectory from which to pick up
the make program.
Create a CTEST_TEST_DEVENV variable that is set to the
CMAKE_MAKE_PROGRAM used for Visual Studio 7, 8, and 9. It will always
be either "devenv" or "VCExpress", and not "MSBuild". Add the
VSExcludeFromDefaultBuild test only when this variable is set, and use
its value as the --build-makeprogram value.
More work will be needed later to restore the test on VS 10 and above
when devenv is available, but this is the simplest approach for now.
The test is only enabled on VS 10 and above, where the generators now
select for "ctest --build-and-test" the MSBuild tool by default.
Simplify the test configuration by dropping the --build-makeprogram
option and all the logic needed to compute its value. The test will
automatically use MSBuild.
Historically these were both added for the Makefile and Visual Studio
generators, respectively. Later the VS generators started using the
CMAKE_MAKE_PROGRAM cache entry to find the IDE build tool, and the
CMAKE_BUILD_TOOL was simply set as an alias.
Fix the documentation to explain that CMAKE_MAKE_PROGRAM is the modern
variable and that CMAKE_BUILD_TOOL is the compatibility alias, not the
other way around. Replace uses of CMAKE_BUILD_TOOL with
CMAKE_MAKE_PROGRAM in CMake-provided modules. Nothing needs to lookup
CMAKE_BUILD_TOOL in the cache, so simply set it as a normal variable.
Some extra options are for "ctest --build-and-test" directly, and others
are values for "--build-options". Split these two roles out into two
separate variables and update existing uses.
Use "cmake --build" to drive the "install" target from the CMake build
tree itself. This avoids using the heavier "ctest --build-and-test"
just to run the native build tool to drive installation.
Run the bootstrap script through "cmake -P" instead of
"ctest --build-and-test" so that we do not need to abuse
the --build-makeprogram option of the latter.
Re-implement the build_command() command to use "cmake --build" instead
of generating a native build tool invocation directly. This command
will internally invoke the proper native build tool.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It will also allow us to later teach CMake to
delay the decision about which build tool to invoke until after the
project build system is generated to disk. For example, on Visual
Studio 10 and above the preferred command-line tool is MSBuild, but we
need to fall back to devenv if the .sln has Intel Fortran .vfproj files.
bf755c7 set: Add unit tests for set/unset PARENT_SCOPE
bc280f1 set: Fix handling of empty value with PARENT_SCOPE
20afbd5 set: Handle value-less PARENT_SCOPE explicitly
Since commit 7d47c693 (Drop compatibility with CMake < 2.4, 2013-10-08)
we no longer need to use the configure_file IMMEDIATE option to support
compatibility modes less than 2.0.
Allow ExternalData_URL_TEMPLATES to be empty if a value for
ExternalData_OBJECT_STORES is provided. Assume in this use case that
the object stores will already contain all needed objects. Extend the
Module.ExternalData test to cover this case (all objects in stores).
Extend the RunCMake.ExternalData test to cover the non-failure message
case when stores are provided without URL templates.
3bade75 Help: Parse Copyright.txt instead of using current year
2bbf6bd Copyright.txt: Add test to check year range
3ee67d0 Copyright.txt: Update year range to end in 2013
621ba1f cmake-gui: Parse Copyright.txt instead of duplicating notice
993b685 bootstrap: Parse Copyright.txt instead of duplicating notice
Add a CMake.Copyright test that, when the CMake version number knows the
year (as it does in development versions), checks that Copyright.txt has
been updated with the current version year.
Split the test cases covering spaces and colons into separate units.
Run the space cases everywhere. Disable the colon cases where they
are known to fail. This approach increases platform coverage for the
test and makes the known-failure logic as local as possible.
No Makefile generator on Windows can generate targets with ':'
in their name because the CMakeFiles/<target>.dir directory cannot
be created. Skip this part of the test on all Windows Make tools.
Commit 239b0c6b (Don't add invalid content to static lib
INTERFACE_LINK_LIBRARIES., 2013-10-20) extended a test which
excercised the logic of the LINK_ONLY generator expression.
Commit ef10b87c (CMP0022: Plain target_link_libraries must populate
link interface, 2013-11-02) removed the instance of LINK_ONLY which
was excercised by that test.
Add a new test which excercises the other instance of LINK_ONLY by
setting the CMP0022 policy to NEW and consuming the contents of the
INTERFACE_LINK_LIBRARIES target property.
In commit 18412153 (Refactor cmTarget::GetCompileDefinitions...,
2013-06-06) cmQtAutomoc was refactored to get all compile definitions
from the target instead of separately asking the target and querying the
directory-level COMPILE_DEFINITIONS property value. While the
generation process does integrate directory-level COMPILE_DEFINITIONS
into the target definitions, this did not happen until after Automoc
targets are constructed. Therefore the commit regressed use of
directory-level definitions in Automoc targets.
Factor the definition finalization logic out from the
cmGlobalGenerator::CreateGeneratorTargets method into a new
cmGlobalGenerator::FinalizeTargetCompileDefinitions method and call it
before constructing Automoc targets. This will place the
directory-level definitions into the target in time to use them for the
Automoc targets.
Extend the QtAutomoc test to cover this case.
b51696f CMP0022: Update target_link_libraries plain signature documentation
25b7f87 Merge branch 'policy-CMP0022-fixes' into policy-CMP0022-fixes-for-master
0a561a0 CMP0022: Warn about a given target at most once
23d21b7 Do not export INTERFACE_LINK_LIBRARIES from non-linkable targets
ef10b87 CMP0022: Plain target_link_libraries must populate link interface
0e06788 CMP0022: Add test for target_link_libraries plain signature
c0f4a61 CMP0022: Add unit test for null pointer check and message.
4b0cfa7 Merge branch 'output-CMP0022-entries' into policy-CMP0022-fixes
Resolve conflict in Source/cmTarget.cxx by integrating the changes to
the internal copy constructor from both sides. Also resolve a logical
conflict by dropping the special case for INTERFACE_LIBRARY targets.
Since cmTarget::SetMakefile already forces CMP0022 to NEW for such
targets we need no special handling.
Resolve conflict in Source/cmTargetLinkLibrariesCommand.h by dropping
the documentation change. We will make the same change in the new
location of the same documentation in a separate commit.
Resolve conflicts in
Tests/RunCMake/CMP0022/CMP0022-WARN-empty-old-stderr.txt
Tests/RunCMake/CMP0022/RunCMakeTest.cmake
by taking the side from the 'policy-CMP0022-fixes' branch.
Since cmTarget::ComputeLinkInterface is called separately for each
"head" target that links a target, the warning we produce when
CMP0022 is not set could be repeated. Add explicit logic to allow
the warning to appear at most once. Multiple copies of the warning
for the same target are almost always identical and therefore
redundant. In the rare case that two copies of the warning are
different, the second can appear in a future run after the first
is fixed.
When cmExportFileGenerator::SetImportLinkInterface exports the old
LINK_INTERFACE_LIBRARIES property values it skips doing so for
non-linkable targets because target->GetLinkInterface returns NULL for
such targets.
Since cmExportFileGenerator::PopulateInterfaceLinkLibrariesProperty
looks at the INTERFACE_LINK_LIBRARIES property directly instead of using
the computed link interface, teach it to skip exporting the property if
target->IsLinkable returns false.
Extend the RunCMake.CMP0022 test with a case covering this. Simply
export an executable target that links to a library that is not
exported.
The CMP0022 NEW behavior is that the INTERFACE_LINK_LIBRARIES property
exactly defines the link interface. The plain target_link_libraries
signature says linking is transitive by default, so it should populate
the property.
Teach the target_link_libraries plain signature to populate the
INTERFACE_LINK_LIBRARIES regardless of the CMP0022 setting. Refactor
the cmTarget::ComputeLinkInterface checks that warn when the policy is
not set to compare the new property to either the explicitly set old
link interface properties or the link implementation fallback for all
linkable target types, not just static libraries.
This fixes a regression in 2.8.12.0 that caused target_link_libraries to
not implement transitive linking in the plain signature once the policy
CMP0022 is set to NEW.
Teach cmGlobalGenerator::CheckTargets to include OBJECT_LIBRARY targets
in the check for source file existence.
Extend the RunCMake.ObjectLibrary test to cover this case.
Some compilers, such as Clang on OS X, do not want the -g flag for both
generating assembly code and assembling it. Drop the -g flag from
generation of main.s in the Assembler test.
Teach the cmGeneratorExpressionEvaluator filesystem artifact logic
to reject OBJECT_LIBRARY targets since they have no main artifact.
Without the explicit rejection evaluation falls through to an
internal CMake error message in cmTarget::GetOutputInfo.
Extend the RunCMake.GeneratorExpression test to cover these cases.
b54dbeb Test foreach/function/macro handling of bracket arguments
ccdf7e0 macro: Do not substitute for placeholders in bracket arguments
999abb9 macro: Add extra indentation to placeholder substitution code
Instead of removing the depot name, which causes problems when looking
at the file change list in CDash, make the Update test remove a given
prefix from the files retrieved from Update.xml.
In certain scenarios, it is preferable to keep a 'dirty' install prefix
than to clear it, and to expect that content will not be found there.
Add a CMAKE_FIND_NO_INSTALL_PREFIX variable that can be set to disable
searching the install prefix.
Bracket arguments recorded in command invocations inside foreach,
function, and macro blocks should not have any replacements done when
the arguments are replayed later. Teach the RunCMake.Syntax test to
cover these cases.
Simply print out the lines as normal paragraph text. Teach the
CMakeLib.testRST test to cover this syntax. Update the
cmake-developer.7 manual to document support for the directives.
Add an Escape1 test case covering \-escape cases inside bracket, quoted,
and unquoted arguments. Also cover comments immediately after quoted
and unquoted arguments on lines containing \# escapes.
9c87d9c Add automatic rcc invocation for Qt.
84218e1 Add automatic uic invocation for Qt.
94a0ca6 Record which files are skipped by automoc.
18fb758 Run the main executable created in the autogen tests.
e485ba1 Rename the QtAutomoc tests to QtAutogen.
7ce65c3 Add extra checks for the AUTOMOC target property.
32771fc Update output messages for generic use.
f371ab5 Rename RunAutomoc to RunAutogen.
85b3d6e Extract an SetupAutoMocTarget method.
ca124a1 Rename the AutomocInfo.cmake file to be more generic.
a342c9f Move some makefile definitions up away from moc-specific code.
98632ef Add the AUTOGEN_TARGETS_FOLDER and obsolete AUTOMOC_TARGETS_FOLDER.
63378ba Rename some variables to reflect broader scope.
97f1aa3 Rename method to reflect generic use.
4abb111 Rename local variable to reflect generic use.
03878c9 Move variable set to where it is used.
...
3e04946 Require CMAKE_<LANG>_COMPILER to be found as a full path
6007f7c CMakeDetermineCompilerId: Always use compiler detected from IDE
332771c CMakeDetermine*Compiler: Remove temporary cache entry
All generators now support detection of the full path to the compiler, so
require it to be so. This will allow CMake<LANG>Information.cmake and
other logic to assume the full path to the compiler tool is available.
The Makefile generators already rejected CMAKE_<LANG>_COMPILER values
that did not name an existing compiler. Extend this error message to
all generators, make it occur as early as possible, and improve the
message with advice about how to set the compiler. If the full path to
the compiler is not known, finish enabling languages with a fatal error
so configuration does not continue.
For now, allow the RC language compiler to not be a full path. Later we
will need to detect the full path to "rc" under the VS IDE.
Add a RunCMake.CompilerNotFound test to cover failure cases.
Fix the RunCMake.CompilerChange test EmptyCompiler case to work
when configuration does not continue past enable_language.
ff59365 CTest: fix dashboard issues associated with the ctest-fix-run-serial topic
7a665ae CTest: added test for RUN_SERIAL issue #14484384beff CTest: added comments that describe the basic test sorting approach
adbe00d CTest: removed redundant copy of test dependency set
1b750cb CTest: perform cycle test early
6d4d7ca CTest: consider previously failed tests before all others
e809d8c CTest: prioritize tests by their depth in the dependency graph
44017a4 CTest: handle dependent and non dependent test requirements equally
ff6c401 cmTarget: Add interface for compatible numeric properties
e4e20c1 cmTarget: Add enumeration for consistency to expect from properties.
9877769 cmTarget: Assign consistent content back to the property being evaluated.
816b4a8 cmTarget: Make consistentProperty return consistent content.
030800a cmTarget: Add a template to create correct implied content.
Teach the ctest_update implementation to use the p4 command-line
client to perform updates and extract the list of changes.
Add a CTest.UpdateP4 test like those that exist already for the other
version control tools. Make the test available when p4 and the p4d
server are found. During the test launch p4d in the background to
serve a repository from the test directory. Then direct the client
toward this server for the duration of the test.
Only valid target names or generator expressions may appear in
the target field of a LINK_ONLY expression.
Other content like link flags should still be added to that property
(wrapped in config-specific generator expressions), but not wrapped
in LINK_ONLY. Otherwise undue warnings would be issued for the
policy CMP0022.
The LINK_ONLY expression only has an effect for actual target
names anyway, so there is no logical deficit.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
It was a subtest of the RunCMake.ObjectLibrary test. However, we need
to test a build with ExternalProject after running CMake, which RunCMake tests
do not do.
The source files are already processed by cmQtAutomoc to look for
moc includes, so extend that to also look for ui_ includes and
find corresponding .ui files to process.
This replaces the need to invoke qt4_wrap_ui().
As the ui files are not likely to be part of the SOURCES of the
target, store the options associated with them separately in the
cmMakefile for querying during the autogen run.
Don't try to show the windows, which would require a gui capable test
machine, and that's not guaranteed.
Automatically link to qtmain.a on Windows to avoid a policy warning. Set
policy CMP0020 to NEW by increasing the required version.
Don't attempt to run the test when using Windows.
When using the boost MPL library, one can set a define to increase
the limit of how many variadic elements should be supported. The
default for BOOST_MPL_LIMIT_VECTOR_SIZE is 20:
http://www.boost.org/doc/libs/1_36_0/libs/mpl/doc/refmanual/limit-vector-size.html
If the foo library requires that to be set to 30, and the independent
bar library requires it to be set to 40, consumers of both need to set
it to 40.
add_library(foo INTERFACE)
set_property(TARGET foo PROPERTY INTERFACE_boost_mpl_vector_size 30)
set_property(TARGET foo PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(foo INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_library(bar INTERFACE)
set_property(TARGET bar PROPERTY INTERFACE_boost_mpl_vector_size 40)
# Technically the next two lines are redundant, but as foo and bar are
# independent, they both set these interfaces.
set_property(TARGET bar PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(bar INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_executable(user)
target_link_libraries(user foo bar)
Because the TARGET_PROPERTY reads the boost_mpl_vector_size property
from the HEAD of the dependency graph (the user target), and because
that property appears in the COMPATIBLE_INTERFACE_NUMBER_MAX of
the dependencies of the user target, the maximum value for it is
chosen for the compile definition, ie, 40.
There are also use-cases for choosing the minimum value of a number.
In Qt, deprecated API can be disabled by version. Setting the
definition QT_DISABLE_DEPRECATED_BEFORE=0 disables no deprecated
API. Setting it to 0x501000 disables API which was deprecated before
Qt 5.1 etc.
If two dependencies require the use of API which was deprecated in
different Qt versions, then COMPATIBLE_INTERFACE_NUMBER_MIN can be
used to ensure that both can compile.
When scanning CMake module files for .rst comments, recognize
bracket comments starting in ".rst:" too. For example:
#[[.rst:
Include the bracket comment content terminated by the closing bracket.
Exclude the line containing the bracket if it starts in "#".
Teach the CMakeLib.testRST test to cover multiple bracket lengths
and ending brackets on lines with and without "#".
Update the cmake-developer.7 manual to document the bracket-comment
syntax for .rst documentation.
Teach the CMake language lexer to treat the \-LF pair terminating a
line ending in an odd number of backslashes inside a quoted argument
as a continuation. Drop the pair from the returned quoted argument
token text. This will allow long lines inside quoted argument
strings to be divided across multiple lines in the source file.
It will also allow quoted argument text to start on the line after
the opening quote. For example, the code:
set(x "\
...")
sets variable "x" to the value "..." with no opening newline.
Previously an odd number of backslashes at the end of a line inside
a quoted argument would put a \-LF pair (or a \-CR pair) literally
in the argument. Then the command-argument evaluator would complain
that the \-escape sequence is invalid. Therefore this syntax is
available to use without changing behavior of valid existing code.
Teach the RunCMake.Syntax test to cover cases of quoted arguments
with lines ending in \, \\, and \\\. Odd counts are continuations.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
Other warnings for the same policy already have similar output since
commit 81d2793e (Add differing target property content to policy CMP0022
warning, 2013-09-11).
Add cmCommand::Disallowed helper to check the setting of a policy that
disallows the command. Add a RunCMake.DisallowedCommands test
placeholder. Add a Help/policy/DISALLOWED_COMMAND.txt file for
inclusion by each policy document to avoid duplication of the common
text.
Teach cmRST to recognize non-markup lines ending in '::' followed by a
blank line as starting a literal block. Record the whole block as if it
were a literal block directive and print it just like a code block.
Extend the CMakeLib.testRST test to cover such cases.
Move the ProcessDirectiveParsedLiteral and ProcessDirectiveCodeBlock
method internals into an OutputMarkupLines helper. Pass through it a
new "inlineMarkup" parameter and teach OutputLine to understand it.
When false, do not process inline markup. Extend the CMakeLib.testRST
test to cover the two cases.
Add a string(CONCAT) command to simply concatenate input arguments
together. This will be useful for combining strings from different
quoting syntaxes. Add a RunCMake.string test covering these cases.
Introduce a policy to control the behavior.
The AliasTargets unit test already tests that using a
double-semicolon in the name is not an error. Change the ExportImport
test to use a namespace with a double-semicolon too.
The result is that the depends of the target are created.
So,
add_library(somelib foo.cpp)
add_library(anotherlib EXCLUDE_FROM_ALL foo.cpp)
add_library(extra EXCLUDE_FROM_ALL foo.cpp)
target_link_libraries(anotherlib extra)
add_library(iface INTERFACE)
target_link_libraries(iface INTERFACE anotherlib)
Executing 'make iface' will result in the anotherlib and extra targets
being made.
Adding a regular executable to the INTERFACE of an INTERFACE_LIBRARY
will not result in the executable being built with 'make iface' because
of the logic in cmComputeTargetDepends::AddTargetDepend.
So far, this is implemented only for the Makefile generator. Other
generators will follow if this feature is possible for them.
Make INTERFACE_LIBRARY targets part of the all target by default.
Test this by building the all target and making the expected library
EXCLUDE_FROM_ALL.
daa0f6f Add Lua-style long brackets and long comments to CMake language
a8c6523 cmListFileLexer: Convert CRLF -> LF newlines explicitly
dbd9333 cmListFileLexer: Allow a leading UTF-8 Byte-Order-Mark (#11137)
5645783 cmListFileLexer: Allow command names with one letter (#14181)
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
This has not been allowed since they were introduced in
commit 91438222 (target_link_libraries: Add LINK_(PUBLIC|PRIVATE)
options, 2011-10-07), but allowing this form makes it more compatible
with the newer PUBLIC and PRIVATE keywords.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Read input files in binary mode instead of text mode and convert CRLF
newlines to LF newlines explicitly in our own buffer. This is necessary
to read CMake source files with CRLF newlines on platforms whose C
runtime libraries do not transform newlines in text mode. For example,
a Cygwin or Linux binary may not transform CRLF -> LF in files read from
a Windows filesystem. Perform the conversion ourselves to ensure that
multi-line string literals in CMake source files have LF newlines
everywhere.
Teach the lexer to read a UTF-8, UTF-16 BE/LE, or UTF-32 BE/LE
Byte-Order-Mark from the start of a file if any is present. Report an
error on files using UTF-16 or UTF-32 and accept a UTF-8 or missing BOM.
Teach the lexer to treat a single letter as an identifier instead of an
unquoted argument. Outside of a command invocation, the parser treats
an identifier as a command name and an unquoted argument as an error.
Inside of a command invocation, the parser treats an identifier as an
unquoted argument. Therefore this change to the lexer will make what
was previously an error case work with no other behavioral change.
Create a cmRST class to perform just enough reStructuredText processing
to support display of Help documents in human-readable text format.
This will be used to implement --help-* command-line options.
Support directives "include", "replace", "parsed-literal", "toctree"
(Sphinx), and "cmake-module" (CMake Sphinx Extension to scan .cmake
modules). Support inline CMake Sphinx Domain roles to convert
cross-references to corresponding title text. Support inline
substitutions defined by the "replace" directive, but keep it simple by
requiring replacements to be defined before use.
Add a CMakeLib "testRST" case to cover processing of supported
constructs and compare results against expected output.
With our modern development workflow it is less likely a property will
be added to C++ code without documentation. This mode only existed to
support the DocTest which had very limited coverage of the properties
anyway.
a4263c9 export(): Handle multiple dependent export sets.
66b290e export(): Process the export() command at generate time.
5fe5c32 export(): Set a Makefile on the cmExportBuildFileGenerator.
e383555 cmExportInstallFileGenerator: Fix comment to match reality.
This allows the use of the $<TARGET_FILE:...> generator expression as a
replacement for the use of the LOCATION target property. The use of the
LOCATION target property is now deprecated for in-build targets.
Also drop other checks for older CMake versions:
* Simplify cmake_set_target_folder macro.
* Use find_package(LibArchive) unconditionally.
* Simplify condition for running testVisualStudioSlnParser test.
* Convert two macros to functions.
* Unconditionally run the CTestTestRerunFailed test.
The final location and name of a build-target is not determined
until generate-time. However, reading the LOCATION property from
a target is currently allowed at configure time. Apart from creating
possibly-erroneous results, this has an impact on the implementation
of cmake itself, and prevents some major cleanups from being made.
Disallow reading LOCATION from build-targets with a policy. Port some
existing uses of it in CMake itself to use the TARGET_FILE generator
expression.
Make the API for adding targets string based so that it can easily
use cmGeneratorTarget.
Teach the cmIncludeCommand to generate the exported file at
configure-time instead if it is to be include()d.
The RunCMake.ExportWithoutLanguage test now needs a dummy header.h
file as expected error from export() is now reported after the
missing file error.
f973737 GenerateExportHeader: Port to use message(DEPRECATION)
f69606d Qt4Macros: Port to use message(DEPRECATION)
509c142 message: Add a DEPRECATION mode
7efef02 FindGTK2: Add tests for components and targets in gtk and gtkmm modules
95fc47a FindGTK2: Make pangocairo and cairo optional dependencies
26f790f FindGTK2: Change extra includes -> optional
24e0272 FindGTK2: do not skip target creation if optional dependencies are not found
d5f130c FindGTK2: Refactor _GTK2_ADJUST_LIB_VARS into _GTK2_ADD_TARGET
fffbd72 FindGTK2: Do not add freetype includes if they are not found
b69720d FindGTK2: Add libraries to the GTK2_LIBRARIES variable only when found
425ec40 FindGTK2: Do not link libfreetype
e9f46df FindGTK2: Add config directories only if different from include ones
56a79e1 FindGTK2: Set INTERFACE_COMPILE_DEFINITIONS target property only if not empty
4b47586 FindGTK2: Add check to ensure that target exists
61242cc FindGTK2: Fix gmodule, glibmm, pangoft2, and pangoxft targets
4b876de FindGTK2: Link freetype libs to targets including freetype includes
67e761f FindGTK2: Small cleanup
682eea3 FindGTK2: Do not require the GTK_ prefix in all the internal functions
0bc3763 FindGTK2: Better handling of include directories
...
54ef2be Haiku: Include files cleanup in cmCTest
38d5555 Haiku: Remove outdated preprocessor checks
1dc61f8 Haiku: Remove use of B_COMMON_DIRECTORY
7ebc1cb Haiku: Several fixes to platform module
1763c31 Set policy CMP0025 to NEW while building CMake itself
aa53ee5 Add policy CMP0025 for Apple Clang compiler id compatibility
ab65862 Clang: Add separate "AppleClang" compiler id
Drop the HELP_XCODE workarounds needed on older Xcode versions when
using Xcode >= 5. We now expect builds and rebuilds to work using
proper dependencies with no special help.
By default, the message is not issued. If CMAKE_ERROR_DEPRECATED
is on, the message is fatal. If CMAKE_WARN_DEPRECATED is on, the
message is a warning.
* Do not define BEOS anymore (this includes workarounds which we don't
need most of the time in Haiku, so we prefer opt-in IF(HAIKU) in the
cmake files instead).
* On the other hand, do define UNIX (we are trying to be compliant) and
HAIKU (there is still a number of things we don't do like the
average UNIX clone)
* Do not use UnixPaths, as our filesystem hierarchy isn't anything like
what it expects.
* Do not use -nostart, which the compiler doesn't know about anymore.
This used to be an Haiku extension to gcc, and is equivalent to
-shared which is the default gcc option.
* While "dl" functions are provided in libroot, this is always
implicitly linked so there is no need to tell cmake about it.
* Forcing position-independent code is not needed, so remove it.
* On the other hand, include appropriate linker options for executables
and shared libraries.
* Support for the two available compilers in Haiku (gcc2 and gcc4) and
pick the right headers and libraries according to the currently
selected one.
* With the adoption of the package manager, the directory layout was
changed. Tell cmake where to look for header files and libraries.
* As we don't define BEOS anymore, enable the workaround we still need
for HAIKU as well. This is the lack of a libm (it is part of the
implicitly linked in libroot)
Applied-by: Rolf Eike Beer <eike@sf-mail.de>
Stephen Kelly
Brad King
Nils Gladitz
Ruslan Baratov
Clinton Stimpson
Zack Galbreath
Daniele E. Domenichelli
Pedro Navarro
Adrien Destugues