3e04946 Require CMAKE_<LANG>_COMPILER to be found as a full path
6007f7c CMakeDetermineCompilerId: Always use compiler detected from IDE
332771c CMakeDetermine*Compiler: Remove temporary cache entry
All generators now support detection of the full path to the compiler, so
require it to be so. This will allow CMake<LANG>Information.cmake and
other logic to assume the full path to the compiler tool is available.
The Makefile generators already rejected CMAKE_<LANG>_COMPILER values
that did not name an existing compiler. Extend this error message to
all generators, make it occur as early as possible, and improve the
message with advice about how to set the compiler. If the full path to
the compiler is not known, finish enabling languages with a fatal error
so configuration does not continue.
For now, allow the RC language compiler to not be a full path. Later we
will need to detect the full path to "rc" under the VS IDE.
Add a RunCMake.CompilerNotFound test to cover failure cases.
Fix the RunCMake.CompilerChange test EmptyCompiler case to work
when configuration does not continue past enable_language.
ff59365 CTest: fix dashboard issues associated with the ctest-fix-run-serial topic
7a665ae CTest: added test for RUN_SERIAL issue #14484384beff CTest: added comments that describe the basic test sorting approach
adbe00d CTest: removed redundant copy of test dependency set
1b750cb CTest: perform cycle test early
6d4d7ca CTest: consider previously failed tests before all others
e809d8c CTest: prioritize tests by their depth in the dependency graph
44017a4 CTest: handle dependent and non dependent test requirements equally
ff6c401 cmTarget: Add interface for compatible numeric properties
e4e20c1 cmTarget: Add enumeration for consistency to expect from properties.
9877769 cmTarget: Assign consistent content back to the property being evaluated.
816b4a8 cmTarget: Make consistentProperty return consistent content.
030800a cmTarget: Add a template to create correct implied content.
Teach the ctest_update implementation to use the p4 command-line
client to perform updates and extract the list of changes.
Add a CTest.UpdateP4 test like those that exist already for the other
version control tools. Make the test available when p4 and the p4d
server are found. During the test launch p4d in the background to
serve a repository from the test directory. Then direct the client
toward this server for the duration of the test.
Only valid target names or generator expressions may appear in
the target field of a LINK_ONLY expression.
Other content like link flags should still be added to that property
(wrapped in config-specific generator expressions), but not wrapped
in LINK_ONLY. Otherwise undue warnings would be issued for the
policy CMP0022.
The LINK_ONLY expression only has an effect for actual target
names anyway, so there is no logical deficit.
Since commit c9a5f34b (Cleanup use of CMake version in install
destinations, 2013-09-26) we use the full CMake version in default
install destinations. For rapidly changing versions of the form
<major>.<minor>.<patch>.<date>-g<commit>[-dirty]
used by developers this is too granular. Instead use just
<major>.<minor>.<patch>
as the version for default install destinations. This will still
be granular enough for unique directories in releases.
On Cygwin continue to use the full ${CMake_VERSION} as was the case
prior to the above-mentioned commit.
The source files are already processed by cmQtAutomoc to look for
moc includes, so extend that to also look for ui_ includes and
find corresponding .ui files to process.
This replaces the need to invoke qt4_wrap_ui().
As the ui files are not likely to be part of the SOURCES of the
target, store the options associated with them separately in the
cmMakefile for querying during the autogen run.
There is no need for a "cmake_automoc" backward compatibility command
because it is internal, undocumented, and only executed from a matching
version of cmake.
When using the boost MPL library, one can set a define to increase
the limit of how many variadic elements should be supported. The
default for BOOST_MPL_LIMIT_VECTOR_SIZE is 20:
http://www.boost.org/doc/libs/1_36_0/libs/mpl/doc/refmanual/limit-vector-size.html
If the foo library requires that to be set to 30, and the independent
bar library requires it to be set to 40, consumers of both need to set
it to 40.
add_library(foo INTERFACE)
set_property(TARGET foo PROPERTY INTERFACE_boost_mpl_vector_size 30)
set_property(TARGET foo PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(foo INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_library(bar INTERFACE)
set_property(TARGET bar PROPERTY INTERFACE_boost_mpl_vector_size 40)
# Technically the next two lines are redundant, but as foo and bar are
# independent, they both set these interfaces.
set_property(TARGET bar PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(bar INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_executable(user)
target_link_libraries(user foo bar)
Because the TARGET_PROPERTY reads the boost_mpl_vector_size property
from the HEAD of the dependency graph (the user target), and because
that property appears in the COMPATIBLE_INTERFACE_NUMBER_MAX of
the dependencies of the user target, the maximum value for it is
chosen for the compile definition, ie, 40.
There are also use-cases for choosing the minimum value of a number.
In Qt, deprecated API can be disabled by version. Setting the
definition QT_DISABLE_DEPRECATED_BEFORE=0 disables no deprecated
API. Setting it to 0x501000 disables API which was deprecated before
Qt 5.1 etc.
If two dependencies require the use of API which was deprecated in
different Qt versions, then COMPATIBLE_INTERFACE_NUMBER_MIN can be
used to ensure that both can compile.
Otherwise, in the string case, we would get a null pointer instead
of the implied empty string. That will become relevant when the
comparison result is used.
When scanning CMake module files for .rst comments, recognize
bracket comments starting in ".rst:" too. For example:
#[[.rst:
Include the bracket comment content terminated by the closing bracket.
Exclude the line containing the bracket if it starts in "#".
Teach the CMakeLib.testRST test to cover multiple bracket lengths
and ending brackets on lines with and without "#".
Update the cmake-developer.7 manual to document the bracket-comment
syntax for .rst documentation.
Teach the CMake language lexer to treat the \-LF pair terminating a
line ending in an odd number of backslashes inside a quoted argument
as a continuation. Drop the pair from the returned quoted argument
token text. This will allow long lines inside quoted argument
strings to be divided across multiple lines in the source file.
It will also allow quoted argument text to start on the line after
the opening quote. For example, the code:
set(x "\
...")
sets variable "x" to the value "..." with no opening newline.
Previously an odd number of backslashes at the end of a line inside
a quoted argument would put a \-LF pair (or a \-CR pair) literally
in the argument. Then the command-argument evaluator would complain
that the \-escape sequence is invalid. Therefore this syntax is
available to use without changing behavior of valid existing code.
Teach the RunCMake.Syntax test to cover cases of quoted arguments
with lines ending in \, \\, and \\\. Odd counts are continuations.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
d169b1f Genex: Use cmArraySize for targetPolicyWhitelist
86d5d80 Genex: Remove use of TransitiveWhitelistCompare
73d7705 Add some templates for cleaner array iteration.
Other warnings for the same policy already have similar output since
commit 81d2793e (Add differing target property content to policy CMP0022
warning, 2013-09-11).
The cmRST implementation and the list of capabilities documented in the
cmake-developer.7 manual must be kept in sync. Add a note to each file
to reference the other.
Add cmCommand::Disallowed helper to check the setting of a policy that
disallows the command. Add a RunCMake.DisallowedCommands test
placeholder. Add a Help/policy/DISALLOWED_COMMAND.txt file for
inclusion by each policy document to avoid duplication of the common
text.
Teach cmRST to recognize non-markup lines ending in '::' followed by a
blank line as starting a literal block. Record the whole block as if it
were a literal block directive and print it just like a code block.
Extend the CMakeLib.testRST test to cover such cases.
Move the ProcessDirectiveParsedLiteral and ProcessDirectiveCodeBlock
method internals into an OutputMarkupLines helper. Pass through it a
new "inlineMarkup" parameter and teach OutputLine to understand it.
When false, do not process inline markup. Extend the CMakeLib.testRST
test to cover the two cases.
CMake/Source/cmGeneratorExpressionParser.cxx: In member function ‘void cmGeneratorExpressionParser::ParseGeneratorExpression(std::vector<cmGeneratorExpressionEvaluator*>&)’:
CMake/Source/cmGeneratorExpressionParser.cxx:116:55: warning: conversion to ‘unsigned int’ from ‘long int’ may alter its value [-Wconversion]
CMake/Source/cmGeneratorExpressionParser.cxx:240:39: warning: conversion to ‘int’ from ‘long int’ may alter its value [-Wconversion]
Add a string(CONCAT) command to simply concatenate input arguments
together. This will be useful for combining strings from different
quoting syntaxes. Add a RunCMake.string test covering these cases.
Teach the Xcode generator to set 'lastKnownFileType' to be 'folder' for
file references that are directories. If you set 'explicitFileType' to
'sourcecode', then Xcode cannot browse the directory.
Introduce a policy to control the behavior.
The AliasTargets unit test already tests that using a
double-semicolon in the name is not an error. Change the ExportImport
test to use a namespace with a double-semicolon too.
The result is that the depends of the target are created.
So,
add_library(somelib foo.cpp)
add_library(anotherlib EXCLUDE_FROM_ALL foo.cpp)
add_library(extra EXCLUDE_FROM_ALL foo.cpp)
target_link_libraries(anotherlib extra)
add_library(iface INTERFACE)
target_link_libraries(iface INTERFACE anotherlib)
Executing 'make iface' will result in the anotherlib and extra targets
being made.
Adding a regular executable to the INTERFACE of an INTERFACE_LIBRARY
will not result in the executable being built with 'make iface' because
of the logic in cmComputeTargetDepends::AddTargetDepend.
So far, this is implemented only for the Makefile generator. Other
generators will follow if this feature is possible for them.
Make INTERFACE_LIBRARY targets part of the all target by default.
Test this by building the all target and making the expected library
EXCLUDE_FROM_ALL.
Teach the VS 7-9 generators to honor the
VS_DOTNET_TARGET_FRAMEWORK_VERSION
target property. This was already done for VS >= 10 by commit cfe6300a
(VS: Add support for .NET target framework version, 2013-06-14).
Inspired-by: mar.na@t-online.de
187385a cmCoreTryCompile: Fix typo in comments.
af2a3ab cmTarget: Remove unused variable.
620b0e9 target_link_libraries(): Fix code snippet in documentation.
2d4ce80 cmPolicies: Fix typo
d6dd264 include(): Use lower case and () to refer to the include() command.
765d783 cmSystemTools: Drop old RunCommand method
52b80b2 exec_program: Re-implement using KWSys Process
c076476 cmake: Drop "cmake -E comspec" Win9x helper
f551135 cmExtraEclipseCDT4Generator: Replace RunCommand with RunSingleCommand
daa0f6f Add Lua-style long brackets and long comments to CMake language
a8c6523 cmListFileLexer: Convert CRLF -> LF newlines explicitly
dbd9333 cmListFileLexer: Allow a leading UTF-8 Byte-Order-Mark (#11137)
5645783 cmListFileLexer: Allow command names with one letter (#14181)
Drop use of cmSystemTools::RunCommand. It used popen on UNIX
(equivalent to /bin/sh -c "$command") and direct CreateProcess calls on
Windows. Implement equivalent behavior using the KWSys Process library.
Copy windows shortpath conversion logic from cmSystemTools::RunCommand.
Enable the --use-stderr behavior by default and ignore the old option.
Passing through the pipes allows color terminal output and other things
to work as if one ran the native build command directly.
d14898b Intel: Fix detection of MSVC version simulated by pre-11.0 Fortran
a85e17e Intel: When simulating MSVC, re-use Windows-MSVC (#14476)
af40e8c VS: Detect Intel Fortran compiler id and version
b8522a8 VS: Expose Intel Fortran .vfproj format version to CMake language
2d36c9a CMakeDetermineCompilerId: Fix Intel Fortran compiler id detection
a6fd17c VS: Fix CMAKE_<LANG>_COMPILER detection with Intel toolset (#14471)
Lookup the Intel VS plugin version on demand in the VS global generator,
compute the corresponding .vfproj format version number, and memoize it.
Add it as a CMAKE_VS_INTEL_Fortran_PROJECT_VERSION platform definition.
These policies were introduced after 2.8.12 in anticipation of 2.8.13.
However, we've now decided the next release will be 3.0.0, so update the
version of introduction accordingly.
The full policy documentation was moved to Help/policy/*.rst by commit
f051814e (Convert builtin help to reStructuredText source files,
2013-10-15). We no longer need the builtin string literals.
In commit 87cc62ca (Drop "full" documentation output types, 2013-09-13)
we dropped code using the LongDescription field of policy definitions.
We need to follow it up with a change similar to commit 399e9c46 (Drop
builtin property documentation, 2013-09-16) to remove the policy
documentation. Do that now. Keep the short description as it is used
in policy error and warning messages.
This has not been allowed since they were introduced in
commit 91438222 (target_link_libraries: Add LINK_(PUBLIC|PRIVATE)
options, 2011-10-07), but allowing this form makes it more compatible
with the newer PUBLIC and PRIVATE keywords.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Read input files in binary mode instead of text mode and convert CRLF
newlines to LF newlines explicitly in our own buffer. This is necessary
to read CMake source files with CRLF newlines on platforms whose C
runtime libraries do not transform newlines in text mode. For example,
a Cygwin or Linux binary may not transform CRLF -> LF in files read from
a Windows filesystem. Perform the conversion ourselves to ensure that
multi-line string literals in CMake source files have LF newlines
everywhere.
Teach the lexer to read a UTF-8, UTF-16 BE/LE, or UTF-32 BE/LE
Byte-Order-Mark from the start of a file if any is present. Report an
error on files using UTF-16 or UTF-32 and accept a UTF-8 or missing BOM.
Teach the lexer to treat a single letter as an identifier instead of an
unquoted argument. Outside of a command invocation, the parser treats
an identifier as a command name and an unquoted argument as an error.
Inside of a command invocation, the parser treats an identifier as an
unquoted argument. Therefore this change to the lexer will make what
was previously an error case work with no other behavioral change.
9b212ad Make --help-* options available from all command-line tools
5dde65a Help: De-duplicate manual/(cmake|ccmake).1.rst build options
ae944d1 Help: Organize manual/*.1.rst sections
4f7d708 Help: Drop leftover conversion content from manual/*.1.rst
Check for "cmake -E ..." up front (along with "cmake --build ...") and
skip normal command line processing. Drop the special handling for -E
from the normal processing to simplify things. Strictly speaking, it
was previously possible to invoke command mode with -E anywhere in the
command line e.g. "cmake echo -E message" or "cmake echo message -E",
but no one should be using it as it was not documented and looks
strange.
Make the standard --help-* options available from all command-line
tools. Drop options that are no longer supported:
--copyright, --help-full, --help-html, --help-man,
--help-compatcommands, --help-custom-modules
De-duplicate Help/manual/*.1.rst help options by using an
OPTIONS_HELP.txt file included from each manual.
7038a93 Modules/readme.txt: Update steps to add module documentation
a77e308 CPack: Replace #<type> markup with reStructuredText equivalent
e7ca48f Help: Factor out cmake-generator-expressions manual page
97e8650 Help: Factor out COMPILE_DEFINITIONS disclaimer duplication
8982161 Help: Factor out find_* command duplication
30b2186 Help: Factor out *_OUTPUT_(NAME|DIRECTORY).rst duplication
bfe07aa Build Help documentation during CMake build using Sphinx
53ded59 Drop unused builtin documentation APIs
0c39a75 Drop the 'Full' field from cmDocumentationEntry
e33d8d2 Drop builtin command documentation
399e9c4 Drop builtin property documentation
6035c04 get_property: Drop test for builtin property documentation
80a3273 Drop all documentation formatters except Usage
b336a1eb Teach COMPATIBLE_INTERFACE_* checks to use Help .rst documents
ec6df36 Teach --help-* options to load documentation from .rst files
25f2877 Add class cmRST to do basic reStructuredText processing
...
Drop all DefineProperty calls for non-chained properties. Drop the
documentation from the chained ones. The documentation for all
properties is now in Help/prop_*/*.rst files.
We now need only the Usage formatter to support command-line options
that print basic usage, and the supporting indented=>preformatted markup
processor to support CMake message formatting. Drop all other
documentation formatters and move the remaining code up into the top
cmDocumentationFormatter class.
These checks want to know if named target properties are builtin, which
is now known by checking the Help/prop_tgt directory. (Previously the
check could be confused by a define_property call in the project.)
Install the Help directory next to Modules to make it available in CMake
distributions. Use cmRST to read Help .rst documents and print them as
help output.
Add options
--help-manual-list
--help-manual
to list available manuals or print one of them. Implement the options
--help-commands
--help-modules
--help-policies
--help-properties
--help-variables
by mapping to the corresponding manual page. Implement the options
--help-command-list
--help-module-list
--help-policy-list
--help-property-list
--help-variable-list
by globbing the available Help .rst documents of the corresponding type
and reading their titles. Implement the options
--help-command
--help-module
--help-policy
--help-property
--help-variable
by globbing the matching Help .rst document(s) and printing them.
Create a cmRST class to perform just enough reStructuredText processing
to support display of Help documents in human-readable text format.
This will be used to implement --help-* command-line options.
Support directives "include", "replace", "parsed-literal", "toctree"
(Sphinx), and "cmake-module" (CMake Sphinx Extension to scan .cmake
modules). Support inline CMake Sphinx Domain roles to convert
cross-references to corresponding title text. Support inline
substitutions defined by the "replace" directive, but keep it simple by
requiring replacements to be defined before use.
Add a CMakeLib "testRST" case to cover processing of supported
constructs and compare results against expected output.
We will no longer support full documentation generation from executables
and will instead generate documentation with other tools. Disable (with
a warning left behind) the command-line options:
--copyright
--help-compatcommands
--help-full
--help-html
--help-man
Drop supporting code. Drop manual sections generation from executables.
Remove internal documentation construction APIs. Drop unused sections
See Also, Author, Copyright, Compat Commands, Custom Modules.
Temporarily add a RST formatter to convert builtin documentation to .rst
source files. This will be removed shortly after we use it to convert
documentation.
Teach the RST formatter to:
* Output preformatted blocks as reStructuredText "::" literal blocks.
* Output option lists as bullet lists with option names enclosed in
reStructuredText ``literal`` quoting.
* Output individual documentation objects (commands, variables, etc.)
in separate .rst files organized in directories by type.
Replace references to cmVersion::GetCMakeVersion() in builtin
documentation with the literal placeholder "|release|" that will be
defined as a substitution later.
With our modern development workflow it is less likely a property will
be added to C++ code without documentation. This mode only existed to
support the DocTest which had very limited coverage of the properties
anyway.
Factor the CMAKE_DATA_DIR, CMAKE_DOC_DIR, and CMAKE_MAN_DIR selection
out of CMakeLists.txt and into a Source/CMakeInstallDestinations.cmake
script. Load the script from the original location of the code.
Cache the destination values as empty strings so we know if the user
sets them explicitly. If not, then compute defaults based on the
platform and full CMake version string. By not caching the versioned
defaults, we can change them in a single build tree as the version
changes.
Remove duplication of the install destination defaults from the
bootstrap script. Cache empty defaults there too. Parse from the CMake
code the default values to report in the help output. Keep the CMake
code in a structured format to make this reliable.
Move logic to compute CMake_VERSION out of the top-level CMakeLists.txt
file to a dedicated Source/CMakeVersionCompute.cmake module and include
it from the original location. This will allow it to be re-used.
a4263c9 export(): Handle multiple dependent export sets.
66b290e export(): Process the export() command at generate time.
5fe5c32 export(): Set a Makefile on the cmExportBuildFileGenerator.
e383555 cmExportInstallFileGenerator: Fix comment to match reality.
list(APPEND) has been able to append nothing since commit a06dcdba
(Allow LIST(APPEND) command to append nothing, 2008-01-16) but the
documentation still used to imply that at least one argument is
required.
The final location and name of a build-target is not determined
until generate-time. However, reading the LOCATION property from
a target is currently allowed at configure time. Apart from creating
possibly-erroneous results, this has an impact on the implementation
of cmake itself, and prevents some major cleanups from being made.
Disallow reading LOCATION from build-targets with a policy. Port some
existing uses of it in CMake itself to use the TARGET_FILE generator
expression.
The export-sets topic, merged in commit 49c7b649 (Merge topic
'export-sets', 2012-10-01) changed install(EXPORT) to allow
exporting targets whose dependents are exported separately
to different locations. Doing the same for export() was not
possible because the export() command was executed at
configure-time.
Now that export() is also executed at generate-time, make it
possible to export to multiple dependent export sets.
Make the API for adding targets string based so that it can easily
use cmGeneratorTarget.
Teach the cmIncludeCommand to generate the exported file at
configure-time instead if it is to be include()d.
The RunCMake.ExportWithoutLanguage test now needs a dummy header.h
file as expected error from export() is now reported after the
missing file error.
This is better than the cmCommand, because the lifetime of that is
not as useful, and it is only used to report an error anyway.
In the next commit, the cmExportBuildFileGenerator will outlive the
cmCommand.
Compilers for languages other than C and C++ on OS X may not understand
the -F framework search flag. Create a new platform information
variable CMAKE_<LANG>_FRAMEWORK_SEARCH_FLAG to hold the flag, and set it
for C and CXX lanugages in the Platform/Darwin module.
Reported-by: Vittorio Giovara <vittorio.giovara@gmail.com>
f973737 GenerateExportHeader: Port to use message(DEPRECATION)
f69606d Qt4Macros: Port to use message(DEPRECATION)
509c142 message: Add a DEPRECATION mode
54ef2be Haiku: Include files cleanup in cmCTest
38d5555 Haiku: Remove outdated preprocessor checks
1dc61f8 Haiku: Remove use of B_COMMON_DIRECTORY
7ebc1cb Haiku: Several fixes to platform module
1763c31 Set policy CMP0025 to NEW while building CMake itself
aa53ee5 Add policy CMP0025 for Apple Clang compiler id compatibility
ab65862 Clang: Add separate "AppleClang" compiler id
By default, the message is not issued. If CMAKE_ERROR_DEPRECATED
is on, the message is fatal. If CMAKE_WARN_DEPRECATED is on, the
message is a warning.
3d8356d Clang: Support Windows variants for GNU and MSVC (#13035, #14458)
51ab85c CMakeDetermineCompilerId: Add notion of "simulated" id/version
be10826 CMakeDetermineCompilerId: Fix local var init
This assumes that coverage.py has been run in such a way to produce its
standard XML output. This uses the Cobertura schema and should be somewhat
generalizable.
Add a new command line argument to ctest. This allows users to
rerun tests that failed during the previous call to ctest. This
is accomplished by analyzing the most recently modified file named
"^LastTestsFailed*" in the Testing/Temporary subdirectory of the
project's binary directory.
Add an unset() command option to remove a variable from the calling
scope, just like the set() command's PARENT_SCOPE option. Teach the
Unset test to cover such cases.
CMake is aware of the policy's NEW behavior and the AppleClang compiler
id. Set the policy to NEW explicitly to avoid the warning and get the
NEW behavior.
Also teach the RunCMake test infrastructure to build tests with
-DCMAKE_POLICY_DEFAULT_CMP0025=NEW to avoid the policy warning
in test output that must match specific regular expressions.
The parent commit introduced a separate "AppleClang" compiler id for
Apple's Clang distribution. Add a policy in order to support projects
that expect this compiler's id to be just "Clang". When the policy is
OLD or not set, map AppleClang back to Clang. Continue to use the
AppleClang id internally while enabling the language, but set the
CMAKE_<LANG>_COMPILER_ID after project() or enable_language() to the
compatible value for use by project code.
Apple distributes their own Clang build with their own version numbers
that differ from upstream Clang. Use the __apple_build_version__ symbol
to identify the Apple Clang compiler and report the Apple Build Version
as the fourth version component in CMAKE_<LANG>_COMPILER_VERSION. Add
Compiler/AppleClang-<lang> and Platform/Darwin-AppleClang-<lang> modules
that simply include the upstream equivalents.
Fix comparisons of CMAKE_<LANG>_COMPILER_ID to Clang in CMake's own
source and tests to account for AppleClang.
Currently, export() is executed at configure-time.
One problem with this is that certain exported properties like
the link interface may not be complete at the point the export() is
encountered leading to an incorrect or incomplete exported
representation. Additionally, the generated IMPORTED_LOCATION
property may even be incorrect if commands following the export()
have an effect on it.
Another problem is that it requires the C++ implementation of cmake
to be capable of computing the exported information at configure time.
This is a limitation on the cleanup and maintenance of the code. At
some point in the future, this limitation will be dropped and more
implementation will be moved from cmTarget to cmGeneratorTarget.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
6a47c37 add_test: Mention generator expressions in old-style add_test docs
d331292 cmTestGenerator: Evaluate generator expressions in test properties
6fe5c4a cmTestGenerator: Separate test properties for each configuration
6931999 VS6: Add some delimiting between error message and content.
d1a5f12 cmTarget: Fix typo in comment.
961c0ba Fix comments to match the code.
7cca50c Remove unused include.
This commit adds the ability to ccmake of cycling through cache options.
This uses the STRINGS property of the cache entry. The enter key will cycle
forward, and the right and left arrows will go up and down in the list.
Re-insert the semicolon which was removed during splitting.
Commit d777b8e7 (Genex: Allow relative paths in INSTALL_INTERFACE.,
2013-07-25) introduced the prefixItems method to allow relative paths
in the argument of the INSTALL_INTERFACE expression. That method was
buggy in that it did not re-introduce the semicolon separator in
the result.
This bug also affects paths which are already absolute in user code.
Some compilers try to simulate other compilers as a drop-in replacement
supporting all the same command-line options and predefined preprocessor
macros. In such cases it will be useful to have CMake load the compiler
information files for the simulated compiler instead of duplicating the
information. Teach CMakeDetermineCompilerId to extract the simulated
compiler id and version when the compiler id detection provides it.
Move the cmake::ExecuteCMakeCommand static method and all the static
methods it calls out of the 'cmake' class to a separate 'cmcmd' class.
Build the latter as part of the main cmake executable with cmakemain.cxx
and not in CMakeLib. Drop unused header includes from "cmake.cxx".
By moving this implementation out of cmake.cxx we avoid carrying it
around in all the executables that use class 'cmake'. It is needed only
for the main "cmake -E" functionality.
Xcode 2.1 through 4 supported $(CURRENT_ARCH) in a PBXFileReference
'path' value used in the "Link Binary with Libraries" build phase.
CMake uses this to reference object file locations on link lines to
bring in OBJECT library content. However, Xcode 5 now evaluates the
$(CURRENT_ARCH) reference in this context as "undefined_arch" so the
wrong path is given to the linker. There seems to be no alternative way
to produce an architecture-specific value in a PBXFileReference.
Fortunately Xcode 5 now also handles link dependencies for paths linked
through OTHER_LDFLAGS. For Xcode >= 5, move the OBJECT library object
file references from the link build phase to OTHER_LDFLAGS. We can
still show the object files in the source group listing in either case.
Xcode 5.0 now computes dependencies from files linked through
OTHER_LDFLAGS, so we no longer need the XCODE_DEPEND_HELPER hack to
re-link dependents when targets change.
In buggy code like
add_custom_command(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/out.h
MAIN_DEPENDENCY ${CMAKE_CURRENT_SOURCE_DIR}/out.h.in
...)
add_custom_command(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/out.h
...)
that has more than one rule to generate the same output CMake has always
used the first rule. However, since commit 2268c41a (Optimize custom
command full-path dependency lookup, 2013-08-06) we update the map from
output to cmSourceFile for every rule generating an output, effectively
keeping the last command instead of the first.
Fix this regression by checking for each map update if the output
already has an entry. If so, keep only the original entry. The VS 8
generator triggers this with a special case for generate.stamp rules
that differ between ZERO_CHECK and normal targets, so do not warn for
now. Leave a TODO comment for warning in the future.
Multiple libraries in a single buildsystem can be exported to multiple
export-sets.
If a library from one export set depends on a library from
another export set, the export logic generates a check in the targets
file to verify that the target in the other export set is found. That
check is executed at downstream-find_package-time.
However, a target may depend privately on a target in another export
set. In that case, the depend used to also be listed in the required
targets in the targets file. Change the export logic to ignore the
private link entries instead.
Resolve conflict in Source/cmTestGenerator.cxx by taking "their" side
(test-property-genex). It already accounts for the lower-case change in
"our" side (generate-modern-style).
The old-style add_test() call does not support generator expressions at
all. This also applies to the properties for the test, but it is not
mentioned at all.
This is useful for cases like:
add_test(NAME mytest COMMAND mydriver $<TARGET_FILE:myexe>)
set_tests_properties(mytest PROPERTIES
REQUIRED_FILES "$<TARGET_FILE:myexe>"
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/$<CONFIGURATION>"
)
In this example we require the actual test executable to exist to
run the test in addition to the test driver at argv[0]. Also the
$<CONFIGURATION> expression improves over \${CTEST_CONFIGURATION_TYPE}
because the latter is not normalized for case-sensitive filesystems.
Move property generation from GenerateScriptConfigs to separate copies
in GenerateOldStyle and GenerateScriptForConfig. This causes the
per-config tests generated for the add_test(NAME) signature to each get
their own test properties. This will allow us to later change the
property values based on the test configuration.
While at it, generate lower-case CMake code (e.g. set_tests_properties).
Inspired-by: Ben Boeckel <mathstuf@gmail.com>
State explicitly that the dependencies will build before the target.
Drop wording that may imply the opposite.
Suggested-by: Rob Stewart <robert.stewart@sig.com>
Teach cmListFileLexerDestroy to call cmListFileLexerSetToken with a NULL
token to free the token string buffer. Without this, if an error occurs
before the token cleanup happens when EOF is reached, then the token
string buffer may leak.
Only one argument is required. Also avoid using the same variable name twice in
the input list and follow the convention used elsewhere for optional arguments.
Similar incomplete generator expressions are already tested
in the GeneratorExpression unit test, but those are executed
with add_custom_target. The generator expressions in the include
directories are run through the preprocessor, whereas the ones
run through add_custom_target are not.
The version of Intel Fortran that actually uses 9.10 as a project format
is very old. Default to the latest format version (11.0) and use the
older format only when known to be necessary.
Suggested-by: Dick Munroe <munroe@csworks.com>
We populate and maintain a vector of structs to keep track of
backtraces already, so no need to populate the Properties container
additionally.
For completeness, it is necessary to remove the condition for
populating the vector for only valid library names and generator
expressions. That condition is now determined when evaluating the
generator expressions.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
We have to also track input files to the configure command. In theory
the input to a configure command could it self be a file that is going
to be deleted later (output from a custom command or configure_file).
The feature needs access to all link libraries. In the future that
will only be possible to calculate at generate-time.
Even when the files were generated at configure time, they were
generated after user code in CMakeLists files were generated. No
policy is needed to handle manipulation of the files from CMake
code, because that was never possible.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
Teach cmMakefile::FinalPass to stop tracking files that don't
exist after we are finished generation.
When CMAKE_SUPPRESS_REGENERATION tells us not to create the ZERO_CHECK
target we should not add dependencies on it from other targets either.
Reviewed-by: Mateusz Loskot <mateusz@loskot.net>
This is necessary because custom commands and targets may create
custom files whose names are determined by generator expressions.
For example, clang should be using $<TARGET_FILE> and $<TARGET_FILE_DIR>
instead of reverse engineering the output file name:
http://thread.gmane.org/gmane.comp.compilers.clang.scm/80523
However, that can only be done when ADDITIONAL_MAKE_CLEAN_FILES
also accepts and evaluates generator expressions.
Similarly, KDE uses the LOCATION property where $<TARGET_FILE>
would also be better in KDE4_HANDLE_RPATH_FOR_EXECUTABLE but
also appends the result to ADDITIONAL_MAKE_CLEAN_FILES.
After this patch, both can be ported to generator expressions.
Commit 10a069b5 (Genex: Fix $<CONFIG> with IMPORTED targets and
multiple locations., 2013-07-15) changed the logic here to include
handling of the MAP_IMPORTED_CONFIG_<CONFIG> target property, but
it was buggy in several ways.
Uppercase the configs in all cases, and compare the mapped configs
with the parameter to the CONFIG genex, instead of with the key of
the mapping.
Ensure CMAKE_DATA_DIR, CMAKE_DOC_DIR, and CMAKE_MAN_DIR are always
relative paths in CMake code, and set defaults accordingly. Use the
install() command instead of install_files() and install_targets().
This is more modern and also avoids stripping of the first character
from user-specified destinations.
While at it, fix the default destinations reported in the bootstrap
help.
The MSBuild version for each Visual Studio generator isn't 4.0. With
Visual Studo 2013 the ToolsVersion moved from being tied to the .NET
framework and now has its own version number.
Exclude Ninja and Xcode from the CMP0021 test
They do not behave the same as the makefile generator with
relative paths.
Don't overwrite the header file for in-source builds.
The commits 9db31162 (Remove CMake-language block-end command
arguments, 2012-08-13) and 77543bde (Convert CMake-language
commands to lower case, 2012-08-13) changed most cmake code
to use lowercase commands and no parameters in termination
commands. However, those changes excluded cmake code generated
in c++ by cmake.
Make a similar style change to code generated by cmake.
With this, projects can enable MACOSX_RPATH by default, but still have
a way to install libraries with no install name dirs into locations
such as /usr/local/lib by setting INSTALL_NAME_DIR="".
Convert the incoming value to a path in the same way that the
already-cached value was converted before comparison.
Do the actual comparison only one time, after both values are
normalized.
Since commit 58e52416 (Warn about arguments not separated by whitespace,
2013-02-16) we warn about arguments not separated by spaces. Loosen the
warning to not complain about left parens not separated by spaces from
the preceding token. This is common in code like "if(NOT(X))".
Teach the RunCMake.Syntax test to cover cases of left parens not
separated by spaces and check that no warning appears.
Fixes this warning from g++ 4.8:
CMake/Source/cmDocumentation.cxx:835:23: warning: typedef 'sdoc_t' locally defined but not used [-Wunused-local-typedefs]
SDOC_UNKNOWN} sdoc_t;
^
The extendResult method expects a non-empty parameters vector, as
assured by the normal case. Avoid calling the method when the parser
finds an incomplete generator expression, but has already entered
the state of expecting to find parameters.
b93982f Merge branch 'dev/fix-variable-watch-crash' into cmake-syntax
c50f7ed cmListFileLexer: Modify flex output to avoid Borland warning
bf73264 Warn about unquoted arguments that look like long brackets
58e5241 Warn about arguments not separated by whitespace
e75b69f cmListFileCache: Convert CMake language parser to class
e945949 Add RunCMake.Syntax test cases for command invocation styles
0546484 cmListFileArgument: Generalize 'Quoted' bool to 'Delimeter' enum
28685ad cmListFileLexer: Split normal and legacy unquoted arguments
1eafa3e cmListFileLexer: Fix line number after backslash in string
f3155cd Add RunCMake.Syntax test to cover argument parsing
6aa0c21 variable_watch: Add test for watching a variable multiple times
b86e37c variable_watch: Check newValue for NULL
f9bb20f variable_watch: Don't share memory for callbacks
05dad99 variable_watch: Fix a typo in the error message
00ce12a variable_watch: Prevent making extra entries in the watch map
34b397e variable_watch: Allow specifying the data to match in RemoveWatch
e43e207 variable_watch: Match client_data when finding duplicates
0d6acb1 variable_watch: Add a deleter for the client data
fc7c3b4 variable_watch: Store client data as pointers
The command itself is owned by the cmMakefile class, but the
cmVariableWatch which holds a pointer to the cmVariableWatchCommand via
the client_data for the callback outlives the cmMakefile class in the Qt
GUI. This means that when the cmMakefile is destroyed, the variable
watch is still in effect, but with a stale pointer.
To fix this, each callback is now a separate entity completely and
doesn't rely on the command which spawned it at all.
An example CMakeLists.txt which demonstrates the issue (only displayed
in cmake-gui, so no tests can be written for it):
set(var 0)
variable_watch(var)
When removing a watch on a variable, using the operator [] on the
internal map will create an empty watch if the variable doesn't have any
existing watches. Rather than creating this empty structure in the map,
return if there isn't a watch on the variable already.
If a callback has the same data as another call, we don't want to delete
the old callback. This is because if the client_data is the same, it
might get deleted causing the new client_data to be bogus. Now, AddWatch
will return true if it will use the watch, false otherwise. Callers
should check the return value to know whether client_data was adopted by
the watch or not.
The client data is arbitrary and the callback may be called an
unspecified number of times, so the cmVariableWatch must be the one to
delete the client data in the end (if it is needed at all).
In the future CMake will introduce Lua-style long bracket syntax.
Warn about unquoted arguments that in the future will be treated
as opening long brackets.
Teach the RunCMake.Syntax test to cover such cases and ensure that the
warning appears.
Teach the lexer to return tokens for whitespace. Teach the parser to
tolerate the space tokens where whitespace is allowed. Also teach the
parser to diagnose and warn about cases of quoted arguments followed
immediately by another argument. This was accidentally allowed
previously, so we only warn.
Update the RunCMake.Syntax test case StringNoSpace expected stderr to
include the warnings.
Replace the boolean value that indicates whether an argument is unquoted
or quoted with a generalized enumeration of possible argument types.
For now "Quoted" and "Unquoted" remain the only types.
If a line inside a string ends in a backslash count the following
newline character as a line increment. Add a test covering this case to
verify that subsequent line numbers are correct.
The output file used for memory checker runs must be unique for every test run
in parallel, so simply make them unique for every test run. Simply use the test
index to avoid collisions.
Some generated cm*Lexer.h headers define preprocessor macros normally
provided by <stdint.h>. The latter is included indrectly by cmMakefile.h
since commit 2268c41a (Optimize custom command full-path dependency
lookup, 2013-08-06). Adjust the order to avoid redefinition warnings.
c90151b VS: Unify how the name of the generator is specified
3873d29 Fix detection of WinCE SDKs with 64bit verion of CMake
40a4302 VS12: Remove duplicated overload of UseFolderProperty()
b02f09d VS: Replace ArchitectureId with PlatformName
4b15dc8 VS: Set CMAKE_VS_PLATFORM_NAME for VS7 and VS71 too
60e568c VS10: Do not set the TargetMachine when detecting the compiler
dfbfe6f VS6: Hardcode id_machine_6 for compiler detection
In the common case of custom command dependencies specified via full
path optimize the implementation of GetSourceFileWithOutput using a
(hash) map. This is significantly faster than the existing linear
search. In the non-full-path case fall back to the existing linear
suffix search.
Since we do not need the information about the target architecture
we can use the PlatformName only to specify the this information.
This also removes setting of the MSVC_*_ARCHITECTURE_ID variable
which is not required, because this variable gets set by the
compiler detection code in CMAKE_DETERMINE_COMPILER_ID_CHECK().
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
Fix generation of the AdditionalIncludeDirectories element content to
escape for XML syntax. We already escape content of other elements,
this one was simply missing by accident.
Use the WIN32_EXECUTABLE target property only to set the SubSystem build
attribute default. When user-specified flags are later parsed they may
then override it.
33e6e0b VS6: Add handling of CMAKE_*_LINKER_FLAGS_<CONFIG> variables
152dfda Add additonal tests for the linker flags
20ed496 Add documentation for the missing CMAKE_*_LINKER_FLAGS_* variables
54f7019 Add CMAKE_STATIC_LINKER_FLAGS to CMakeCommonLanguageInclude
2a43c30 Add support for CMAKE_STATIC_LINKER_FLAGS
14bbf83 Unify the way the flags of a static library are read
Add CMAKE_MODULE_LINKER_FLAGS_*, CMAKE_SHARED_LINKER_FLAGS_* and
CMAKE_STATIC_LINKER_FLAGS_* to cmDocumentVariables.cxx with a
similar documentation as CMAKE_EXE_LINKER_FLAGS_*.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
Teach cmMakefile::ConfigureFile to skip tracking files with "CMakeTmp"
in their path, just like cmCoreTryCompile::TryCompileCode does to
avoid adding dependencies on temporary source files. In the future
we will need a more general filter to avoid recording as CMake
outputs any files that do not exist at the end of generation.
The new feature of install(TARGETS ... INCLUDES DESTINATION) introduced
in commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced this crash. If the
new feature is used with a target which has no
INTERFACE_INCLUDE_DIRECTORIES, a segfault occurred.
Commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced an error case for
using the install(TARGETS) command with specified INCLUDES DESTINATION,
but no specified EXPORT set.
It is convenient to use a variable to set the various destinations
for different outputs (as KDE does), and some targets such as
executables are installed but not exported. This was triggering
the error case, but as it is a common case, remove the error.
Pass the original file handles to the native tool when using the
--use-stderr option in the build command. This enables the
usage of advanced terminal features like colored output.
This reverts commit 6187876dea.
It was actually possible before to have paths with spaces in them, the spaces
just need to be quoted. This way spaces will work as argument separators.
Ninja relies on the generator to produce paths that match up with the
paths used in the build.ninja file, which are spelled with backslashes.
Therefore, cmcldeps should canonicalize depfile paths to use backslashes
and relativize paths to the build directory.
GCC warns:
dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
on constructs like
*(sha_word64*)&var =
so use memcpy to perform such assignments instead.
First, it prevents a NULL dereference and second it reiterates that
targets without languages are not supported by CMake.
Add a RunCMake.ExportWithoutLanguage test exporting a library without a
languages.
Add a new signature to help populate INTERFACE_LINK_LIBRARIES and
LINK_LIBRARIES cleanly in a single call. Add policy CMP0023 to control
whether the keyword signatures can be mixed with uses of the plain
signatures on the same target.
Nils Gladitz
Brad King
Kitware Robot
Stephen Kelly
Pedro Navarro
Peter Kümmel
Rolf Eike Beer
Michael Priestman
Роман Донченко
Adrien Destugues
Patrick Reynolds
Zack Galbreath
Sean McBride
Bill Hoffman
Eric NOULARD
Ben Boeckel
Clinton Stimpson
Robert Maynard
Yury G. Kudryashov
Patrick Gansterer
Nicolas Despres
Alex Neundorf
Reid Kleckner
Ben Boeckel