When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
The ALLOWED_UNKNOWN_VARIABLE_READ_ACCESS access type was switched on an
undocumented variable and its lookup caused an unnecessary performance
impact. Remove it.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Introduce a new implementation of ExpandVariablesInString and select
between the old and new implementations based on policy CMP0053.
Instead of cmCommandArgumentParserHelper, use a custom parser with our
own stack. This is much faster and works well for our simple grammar.
The new behavior of CMP0053 should expand @VAR@ syntax only in certain
contexts. All existing EVIS callers use "replaceAt == true" so
hard-code our call to the old implementation. Update the signature to
default to "replaceAt == false" and pass "replaceAt == true" explicitly
in the call sites for configure_file and string(CONFIGURE).
Testing the configure (no generate) step with ParaView shows ~20%
performance improvement.
In terms of complete configure/generate steps, further testing with
ParaView shows a 20% performance improvement over 2.8.12.2 with Unix
Makefiles and minimal with Ninja. Ninja is less because it generate step
is the expensive part (future work will address this) by a long shot and
these changes help the configure step for the most part.
3f517522 StoreMatches: Minor cleanups
ef62fbad ClearMatches: Store match variable names statically
f718b30a ClearMatches: Only clear matches which were actually set
ClearMatches was clearing many variables which were never set in the
first place. Instead, store how many matches were made last time and
only clear those. It is moved to the cmMakefile class since it is a
common utility used by multiple commands.
Users of the new target_compile_features command are expected to
check the existence of the CMAKE_CXX_COMPILE_FEATURES variable before
attempting to use it to require features.
Expect cxx_variadic_templates to implement N2555.
N2555 is essentially a bugfix and predates most compiler releases which
aimed to experimentally support variadic templates.
Record the availability of this feature for GNU 4.8 on (UNIX AND
NOT APPLE) only. In the future, availability can be recorded for
earlier GNU, for other platforms and for other compilers. Initially
the affected configurations are as restricted as possible to allow
for easy testing while extending the features vector in only one
dimension.
The error message when using the set_property API directly is not
very good, but follow up commits will provide origin debugging of
the property and a target_compile_features command which will
provide a configure-time backtrace when possible.
Use the contents of it to upgrade the CXX_STANDARD target property,
if appropriate. This will have the effect of adding the -std=c++11
compile flag or other language specification on GNU when that is
needed for the feature.
5de63265 Genex: Only evaluate TARGET_OBJECTS to determine target sources.
aa0a3562 cmGeneratorTarget: Compute target objects on demand
042c1c83 cmTarget: Compute languages from object libraries on demand.
fdcefe3c cmGeneratorTarget: Compute consumed object libraries on demand.
c355d108 cmComputeTargetDepends: Track object library depends.
e5da9e51 cmTarget: Allow any generator expression in SOURCES property.
5702e106 cmTarget: Include TARGET_OBJECTS genex in target SOURCES property.
857d30b5 cmGlobalGenerator: Add interface to call ForceLinkerLanguages
28e1d2f8 cmStringCommand: Add GENEX_STRIP subcommand.
bf98cc25 Genex: Evaluate TARGET_OBJECTS as a normal expression.
8cd113ad cmTarget: Store strings instead of cmSourceFile* to represent SOURCES.
4959f341 cmSourceFileLocation: Collapse full path for directory comparisons.
fcc92878 cmSourceFileLocation: Remove unused Update method.
59e8740a cmTarget: Remove AddSourceFile method
26d494ba cmTarget: Use string API to add sources to cmTarget objects.
d38423ec cmTarget: Add a method to obtain list of filenames for sources.
...
This method was added in a commit based on a release branch that
pre-dated the std::string API changes. Port the implementation to use
the string APIs instead of c_str().
These policies are triggered by the use of a particular compiler rather
than outdated CMake code in a project. Avoid warning in every project
that enables a language by not displaying the policy warning by default.
Add variable CMAKE_POLICY_WARNING_CMP<NNNN> to control the warning
explicitly; otherwise enable the warning with --debug-output or --trace.
This breaks with strict policy convention because it does not provide
developers with any warning about the behavior change by default.
Existing projects will continue to build without a warning or change in
behavior. When a developer changes the minimum required version of
CMake in a project to a sufficiently high value (3.0), the project will
suddenly get the new compiler id and may break, but at least the
breakage comes with a change to the project rather than the version of
CMake used to build it.
Breaking strict policy convention is worthwhile in this case because
very few projects will be affected by the behavior change but every
project would have to see the warning if it were enabled by default.
Use the clang RemoveCStrCalls tool to automatically migrate the
code. This was only run on linux, so does not have any positive or
negative effect on other platforms.
Casts from std::string -> cmStdString were high on the list of things
taking up time. Avoid such implicit casts across function calls by just
using std::string everywhere.
The comment that the symbol name is too long is no longer relevant since
modern debuggers alias the templates anyways and the size is a
non-issue since the underlying methods are generated since it's
inherited.
When running CMake from the build tree the CMAKE_ROOT is the
entire source tree. Fix the CMP0017 check to be specific to
the Modules/ directory under CMAKE_ROOT so that Tests/ does
not count. Fix the FindPackageTest modules to include FPHSA
by full path from CMAKE_ROOT so that they do not include the
local FPHSA which reports an error meant to test that CMP0017
works.
Define a new 'CMAKE_CONFIGURE_DEPENDS' directory property that projects
can use to specify input files to the CMake configuration process.
Extend the RunCMake.Configure test to verify that the build system
re-runs CMake when this input changes.
Most callers already have a std::string, on which they called c_str() to pass it
into these methods, which internally converted it back to std::string. Pass a
std::string directly to these methods now, avoiding all these conversions.
Those methods that only pass in a const char* will get the conversion to
std::string now only once.
The include_directories() and add_compile_options() commands
should not append to the corresponding target property for IMPORTED
targets. This is already the case for add_definitions().
As an INTERFACE_LIBRARY has no direct link dependencies, we can
short-circuit in cmGeneratorExpressionEvaluator and
in cmGlobalGenerator::CheckLocalGenerators.
As they do not generate any output directly, any generate- or install-
related code acn also be short-circuited. Many of the local generators
already do this.
Because only INTERFACE related properties make sense on INTERFACE_LIBRARY
targets, avoid setting other properties, for example via defaults.
Rename cmSystemTools::FindExecutableDirectory to FindCMakeResources.
Teach it to compute the locations of cmake, ctest, cpack, ccmake, and
cmake-gui executables, and the location of CMAKE_ROOT. Provide this
information from static cmSystemTools::Get<resource>() methods.
Refactor code that needs these locations to use the new APIs.
Teach FindCMakeResources to use the OS X system API to lookup the
executable location. When running from the CMake build tree itself,
leave a file in the tree that FindCMakeResources can use to read the
location of the source tree. This avoids the need to compile the source
tree location into a binary that may be installed and used without the
source tree.
Teach the QtDialog on OS X to create a "cmake-gui" symlink in the build
tree next to "cmake" and the other tools, as is already done in the
install tree for the application bundle. This ensures a consistent set
of executables are available in one directory.
9c87d9c Add automatic rcc invocation for Qt.
84218e1 Add automatic uic invocation for Qt.
94a0ca6 Record which files are skipped by automoc.
18fb758 Run the main executable created in the autogen tests.
e485ba1 Rename the QtAutomoc tests to QtAutogen.
7ce65c3 Add extra checks for the AUTOMOC target property.
32771fc Update output messages for generic use.
f371ab5 Rename RunAutomoc to RunAutogen.
85b3d6e Extract an SetupAutoMocTarget method.
ca124a1 Rename the AutomocInfo.cmake file to be more generic.
a342c9f Move some makefile definitions up away from moc-specific code.
98632ef Add the AUTOGEN_TARGETS_FOLDER and obsolete AUTOMOC_TARGETS_FOLDER.
63378ba Rename some variables to reflect broader scope.
97f1aa3 Rename method to reflect generic use.
4abb111 Rename local variable to reflect generic use.
03878c9 Move variable set to where it is used.
...
The source files are already processed by cmQtAutomoc to look for
moc includes, so extend that to also look for ui_ includes and
find corresponding .ui files to process.
This replaces the need to invoke qt4_wrap_ui().
As the ui files are not likely to be part of the SOURCES of the
target, store the options associated with them separately in the
cmMakefile for querying during the autogen run.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Drop all DefineProperty calls for non-chained properties. Drop the
documentation from the chained ones. The documentation for all
properties is now in Help/prop_*/*.rst files.
With our modern development workflow it is less likely a property will
be added to C++ code without documentation. This mode only existed to
support the DocTest which had very limited coverage of the properties
anyway.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
In buggy code like
add_custom_command(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/out.h
MAIN_DEPENDENCY ${CMAKE_CURRENT_SOURCE_DIR}/out.h.in
...)
add_custom_command(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/out.h
...)
that has more than one rule to generate the same output CMake has always
used the first rule. However, since commit 2268c41a (Optimize custom
command full-path dependency lookup, 2013-08-06) we update the map from
output to cmSourceFile for every rule generating an output, effectively
keeping the last command instead of the first.
Fix this regression by checking for each map update if the output
already has an entry. If so, keep only the original entry. The VS 8
generator triggers this with a special case for generate.stamp rules
that differ between ZERO_CHECK and normal targets, so do not warn for
now. Leave a TODO comment for warning in the future.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
We have to also track input files to the configure command. In theory
the input to a configure command could it self be a file that is going
to be deleted later (output from a custom command or configure_file).
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
Teach cmMakefile::FinalPass to stop tracking files that don't
exist after we are finished generation.
b93982f Merge branch 'dev/fix-variable-watch-crash' into cmake-syntax
c50f7ed cmListFileLexer: Modify flex output to avoid Borland warning
bf73264 Warn about unquoted arguments that look like long brackets
58e5241 Warn about arguments not separated by whitespace
e75b69f cmListFileCache: Convert CMake language parser to class
e945949 Add RunCMake.Syntax test cases for command invocation styles
0546484 cmListFileArgument: Generalize 'Quoted' bool to 'Delimeter' enum
28685ad cmListFileLexer: Split normal and legacy unquoted arguments
1eafa3e cmListFileLexer: Fix line number after backslash in string
f3155cd Add RunCMake.Syntax test to cover argument parsing
Replace the boolean value that indicates whether an argument is unquoted
or quoted with a generalized enumeration of possible argument types.
For now "Quoted" and "Unquoted" remain the only types.
In the common case of custom command dependencies specified via full
path optimize the implementation of GetSourceFileWithOutput using a
(hash) map. This is significantly faster than the existing linear
search. In the non-full-path case fall back to the existing linear
suffix search.
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
Teach cmMakefile::ConfigureFile to skip tracking files with "CMakeTmp"
in their path, just like cmCoreTryCompile::TryCompileCode does to
avoid adding dependencies on temporary source files. In the future
we will need a more general filter to avoid recording as CMake
outputs any files that do not exist at the end of generation.
It accepted an optional argument to test for equality, but no way
to get the linker language of a particular target.
TARGET_PROPERTY provides this flexibility and STREQUAL provides
the necessary API for equality test.
Extend the CompileDefinitions test to cover accessing the
property of another target.
9cf3547 Add the INTERFACE_SYSTEM_INCLUDE_DIRECTORIES target property.
1925cff Add a SYSTEM parameter to target_include_directories (#14180)
286f227 Extend the cmTargetPropCommandBase interface property handling.
83498d4 Store system include directories in the cmTarget.
f1fcbe3 Add Target API to determine if an include is a system include.
2679a34 Remove unused variable.
Use constructs similar to those for COMPILE_OPTIONS. This is a little
different because there is a command to remove_definitions(), so
we can't populate the equivalent target property until generate-time
in cmGlobalGenerator.
Entries from the cmMakefile are processed and maintained similarly
to other include directories. The include_directories(SYSTEM)
signature affects all following targets, and all prior targets
in the same makefile.
Currently when a configured file is removed from the build directory,
running the build command will not regenerate the file. Now detect
this and will rerun cmake properly when a user issues the build
command.
AddCMakeDependFile and AddCMakeOutputFile both store as std::string
and all calling sites use std::string. So instead of creating more
temporary objects, lets just use std::strings.
This command is similar to add_definitions, in that it affects
the compile options of all targets which follow it. The implementation
is similar to the implementation of the include_directories command,
in that it is based on populating a COMPILE_OPTIONS directory property
and using that to initialize the same property on targets.
Unlike the include_directories command however, the add_compile_options
command does not affect previously defined targets. That is, in
the following code, foo will not be compiled with -Wall, but bar
will be:
add_library(foo ...)
add_compile_options(-Wall)
add_library(bar ...)
ba48e63 Generate config-specific interface link libraries propeties.
deb51a7 Remove unused forward declarations.
9712362 Don't allow utility or global targets in the LINKED expression.
faa927e Make sure INTERFACE properties work with OBJECT libraries.
510fdcb Whitelist target types in target_{include_directories,compile_definitions}
4de7178 Ensure that the build interface includes have been added.
df74bc3 Only append build interface include dirs to particular targets.
d4e5c67 Don't keep track of content determined by target property values.
1fb545a Move a special case for PIC from the genex to the cmTarget code.
57175d5 Only use early evaluation termination for transitive properties.
4cf161a Fix determination of evaluating link libraries.
3a298c0 Fix generation of COMPILE_DEFINITIONS in DependInfo.cmake.
655e98b Ensure type specific compatible interface properties do not intersect.
46e2896 The COMPATIBLE_INTERFACE does not affect the target it is set on.
5f926a5 Test printing origin of include dirs from tll().
7c0ec75 De-duplicate validation of genex target names.
...
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_TOOLSET and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorToolset test to cover basic "-T" option cases.
Verify that CMAKE_GENERATOR_TOOLSET is empty without -T, that -T is
rejected when the generator doesn't support it, and that two -T options
are always rejected.
Since commit 08cb4fa4 (Process generator expressions in the
INCLUDE_DIRECTORIES property., 2012-09-18), it is possible to use
generator expressions with the include_directories command.
As that command can also have a SYSTEM argument, ensure that the
result of using that argument with generator expressions gives a
sane result.
During configure-time, GetIncludeDirectories may be called too, for example
if using the export() command. As the content can be different, it should
be output each time then.
Otherwise, we get a separate IncludeDirectoriesEntry for each include,
and that causes unnecessary and confusing splitting in the output when
debugging the INCLUDE_DIRECTORIES property.
Historically CMake has always expanded ${} variable references in the
values given to include_directories(), link_directories(), and
link_libraries(). This has been unnecessary since general ${}
evaluation syntax was added to the language a LONG time ago, but has
remained for compatibility with VERY early CMake versions.
For a long time the re-expansion was a lightweight operation because it
was only processed once at the directory level and the fast-path of
cmMakefile::ExpandVariablesInString was usually taken because values did
not have any '$' in them. Then commit d899eb71 (Call
ExpandVariablesInString for each target's INCLUDE_DIRECTORIES,
2012-02-22) made the operation a bit heavier because the expansion is
now needed on a per-target basis. In the future we will support
generator expressions in INCLUDE_DIRECTORIES with $<> syntax, so the
fast-path in cmMakefile::ExpandVariablesInString will no longer be taken
and re-expansion will be very expensive.
Add policy CMP0019 to skip the re-expansion altogether in NEW behavior.
In OLD behavior perform the expansion but improve the fast-path
heuristic to match ${} but not $<>. If the policy is not set then warn
if expansion actually does anything. We expect this to be encountered
very rarely in practice.
Since commit e1409ac5 (Support building shared libraries or modules
without soname, 2012-04-22) CMake crashes on the code
add_library(foo SHARED foo.nolang)
because the logic to lookup the language's soname flag was moved from
cmTarget::GetLibraryNames to cmMakefile::GetSONameFlag without its check
for a NULL language. Restore the check for NULL.
Add RunCMake.Languages test to cover language error cases like this one.
In trace mode ('--trace'), any 'elseif' or 'else' commands that are
evaluated as part of a conditional block will be printed. Previously,
only the opening 'if' command of a conditional block was printed.
Add a boolean target property NO_SONAME which may be used to disable
soname for the specified shared library or module even if the platform
supports it. This property should be useful for private shared
libraries or various plugins which live in private directories and have
not been designed to be found or loaded globally.
Replace references to <CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG> and
hard-coded -install_name flags with a conditional <SONAME_FLAG> which is
expanded to the value of the CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG
definition as long as soname supports is enabled for the target in
question. Keep expanding CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG in
rules in case third party projects still use it. Such projects would
not yet use NO_SONAME so the adjacent <TARGET_SONAME> will always be
expanded. Make <TARGET_INSTALLNAME_DIR> NO_SONAME aware as well. Since
-install_name is soname on OS X, this should not be a problem if this
variable is expanded only if soname is enabled.
The Ninja generator performs rule variable substitution only once
globally per rule to put its own placeholders. Final substitution is
performed by ninja at build time. Therefore we cannot conditionally
replace the soname placeholders on a per-target basis. Rather than
omitting $SONAME from rules.ninja, simply do not write its contents for
targets which have NO_SONAME. Since 3 variables are affected by
NO_SONAME ($SONAME, $SONAME_FLAG, $INSTALLNAME_DIR), set them only if
soname is enabled.
Add cmGlobalGenerator::GenerateRuleFile to compute a generator-specific
rule file location. This will allow specific generators to override the
location of .rule files without changing the behavior of other
generators.
Teach cmMakefile::AddCustomCommandToOutput to return the cmSourceFile
instance to which the custom command is attached. Use the return value
instead of separately adding a .rule extension and searching for the
source. Mark CMake-generated .rule files explicitly with a property
instead of trusting the file extension.
Commit 328c0f65 (Simplify cmVisualStudio10TargetGenerator source
classification, 2012-03-19) introduced the first use of source
classification from cmGeneratorTarget (which originated as Makefile
generator logic) in a Visual Studio generator for handling of header
files. Fix classification of header files to match known header
extensions instead of only the HEADER_FILE_ONLY property. Make it
consistent with the "Header Files" source group.
This library type can compile sources to object files but does not link
or archive them. It will be useful to reference from executable and
normal library targets for direct inclusion of object files in them.
Diagnose and reject the following as errors:
* An OBJECT library may not be referenced in target_link_libraries.
* An OBJECT library may contain only compiling sources and supporting
headers and custom commands. Other source types that are not normally
ignored are not allowed.
* An OBJECT library may not have PRE_BUILD, PRE_LINK, or POST_BUILD
commands.
* An OBJECT library may not be installed, exported, or imported.
Some of these cases may be supported in the future but are not for now.
Teach the VS generator that OBJECT_LIBRARY targets are "linkable" just
like STATIC_LIBRARY targets for the LinkLibraryDependencies behavior.
Rename cmGlobalGenerator::GetCMakeCFG{InitDirectory => IntDir} to
have a shorter name without a typo. Add a 'const' qualifier since
the method is only for lookup and never needs to modify anything.
d662dff Fix shadowed variable warning on dashboard results
f66e735 Fix compiler warning reported on older Borland dashboard.
d90eed4 Fix compiler error reported on older Borland dashboard.
8233636 Update the documentation regarding INCLUDE_DIRECTORIES.
d899eb7 Call ExpandVariablesInString for each target's INCLUDE_DIRECTORIES
c21db87 Make search paths ordered and unique
22021f0 Remove cmMakefile::GetIncludeDirectories
9106b56 Extract and use the INCLUDE_DIRECTORIES target properties.
840509b Keep the INCLUDE_DIRECTORIES target property up to date.
a4d5f7b Add API to get the ordered includes for a target.
8adaee2 CMake: Eliminate cmMakefile::IncludeDirectories
7620932 Remove include flags memoization.
97a5faa Make it safe to call this method without creating duplicates.
edd5303 Refactor GetIncludeFlags to take includes instead of fetching them
For strict backwards compatibility only. This should be unnecessary at
this point, but introducing a policy to deprecate it properly is a
whole different topic branch...
Consider the case motivating commit e01cce28 (Allow add_dependencies()
on imported targets, 2010-11-19). An imported target references a file
generated at build time by a custom target on which it depends. Had the
file been built directly using add_library or add_executable its target
name would have been visible globally. Therefore the imported target
representing the file should be globally visible also.
Teach the IMPORTED signature of add_(executable|library) to accept a new
"GLOBAL" option to make the imported target visible globally.
Make it a static method instead of an array. It is safer for the
type checking and if we add a new target type we will be warned to add
a case to the switch.
59238dc Fix --find-package mode on Cygwin, where enable_language(RC) is called
98472e4 Require the current cmake version in --find-package mode
a6ccf3c Use $(CXXFLAGS) and $(LDFLAGS) in the --find-package test Makefile
4386918 Fix line length
7d69310 Only enable the test when using GNU make
3011149 Make the test harder by always having a space in the include dirs
ab57ff6 Make the --find-package test harder
626fc71 Much improved test, should now be executed on all UNIXes
ec6982d Disable any STATUS output in --find-package mode
e552ae7 Dont check for -isysroot and -mmacosx-version on OSX in --find-package mode
e589589 Rename helper macros print_compile_flags() to set_compile_flags_var()
aecfc1f Fix test on OpenBSD with BSD make
6bb4ca3 The makefile for the test was kindof wrong
fd15b5e Only run the test if we are using a makefile generator under UNIX
9fc87c6 Add a test for the new --find-package mode
d3ae0ff Improve documentation for --find-package mode
bf07375 Add a cmake.m4 for using cmake in autoconf projects instead of pkgconfig
b0e3578 Use the file-utility to test for 64bit if there is no /usr/lib64
53edfb2 Better support for lib64 and Debian multiarch
b8fdaa1 Fix copyright notice in new CMakeFindPackageMode.cmake
7690edf Replace cmake::GetScriptMode() with GetWorkingMode()
e4f603b Implement find-package mode of cmake
a91d662 Add find-package mode, which does nothing yet
b976e70 Make clLocalGenerator::GetTargetFlags() public
Any STATUS output will be fed directly to the compiler, which
will not understand any status messages. Error messages
are fine, since they are errors and it is ok if the compiler
fails in such cases.
Alex
set_property() has APPEND, which creates a list. E.g. when
appending to COMPILE_FLAGS a string is needed, not a list.
With the APPEND_STRING option the value is append as string,
not as list.
Alex
dd2f814 Merge branch 'dev/add_test-working-directory' into dev/strict-mode
949d32c Unwatch manual variables upon removal in cmake-gui
3939032 Unwatch manual variables upon removal in ccmake
8354413 Add method to unwatch a manual variable
8ed3c85 Give a better message for unused variables
729db48 Fix ArgumentExpansion test expected results
89c2544 Checking for a definition is a usage
5625dee Don't output to stderr in the GUI
ad25a96 Merge branch 'ImprovedDotSupport2' into dev/strict-mode
c128abe Merge branch 'AddCMAKE_CURRENT_LIST_DIR' into dev/strict-mode
9bcaff0 Merge branch 'cmake-guiRememberAdvancedCheckbox' into dev/strict-mode
544d0c3 Fix expected output for WarnUninitialized test
4e3bea4 Update expected messages to new format
8e8c9e4 Don't check at destruction for usage
668e005 Use cmake::IssueMessage for warnings
88cd4c1 Use 'CMake Warning' versus 'warning' for CDash
3c3b98d Initialize the class before setting warn flags
cf8b15a Ignore files under the CMakeFiles directory
fd50f06 Don't check for unused vars at configure time
447a04c Don't warn during configure when doing everything
b97ee21 Check for unused variables at the end of generate
c18c977 When checking for variables, specify a reason
3f1121f Use a long int since Line is a long as well
2507f93 Change the failure case string to 'Unexpected'
fe390a2 Add 'ArgumentExpansion' test
8dbb209 Wrong boolean value for CLI warnings
d4ee998 Hard-code the --no-warn-unused-cli flag
a267b99 Fix line lengths
82ed104 Flag that the directories have been set
5aa535b Add argument to arg parsing to not set directories
367e5c3 Revert "Revert "When calling CMake, set the args and the cache""
ab5d4e4 Revert "When calling CMake, set the args and the cache"
9b90040 When calling CMake, set the args and the cache
fe56002 Fix long lines for KWStyle
5d30cfc Set a watch on variables added through the gui
33c63b1 Add a method to put a watch for variables
535253f Initialize the warning variables earlier
cbb286c Fix the path detection to work for top-level
62be1f7 Initialize the usage stack earlier
c6e7fab Factor out the checks for unused variables
5e41ba8 When using the API, check for Add vs. Remove
dee1976 Fix typo in VariableUnusedViaUnset test
f231ce5 Remove old false positive avoidance code
a117e02 Revert "Add test for unused warnings at the end of scope"
2c82f2b Exempt CMAKE(CURRENT|PARENT)_LIST_FILE from usage
6d7d449 Ignore CLI warnings for ABI determination
7740a73 Only return local keys that are defined
bef3aee Use the API so that warnings can be tracked
05cb0f4 Check for unused variables in the dtor
91c4c99 Add test for unused warnings at the end of scope
ca90f67 Fix detection of unused variables when setting
f7438ca Add test for unused detection via setting it
995cfb0 Don't warn if the variable wasn't defined
aefc91d Add test for usage checks via unset
a8e97f8 Remove VarRemoved code since it's been superceded
59463ef Rework CheckVariableForUnused usage
f117423 Fix line lengths to be no more than 78
e49a935 Improve unused warning logic
e01e40c Mark ARGC, ARGV*, and ARGN as used
a17aff7 Ignore CMAKE_MATCH_* variables for usage
02a114d Add method to allow variables to be marked as used
a0b0d23 CMAKE_DO_TRY_COMPILE is no longer used
ae3eff3 Fix the path used for ignoring system warnings
056b441 Fix missing case for usage of a variable
980e048 Factor out checks for unused variables
83acb0a Remove now unused variables
3801463 Use built-ins for readability and maintainability
8b52015 Push the initialize and unused states when copying
439877f Be consistent with single and double quotes
4cf1706 Add documentation for check-system-vars
b74777f Fix the spelling of the flag for warn-unused-vars
b948120 Change logic of flag to turn off cli unused checks
f047a17 Add test for uninitialized variables
75bda38 Add tests for unused command line variables
300fc15 Fix detection of system files
d784e6a Run the unused variables check on the final pass
9efc057 VariableWatch is not available when bootstrapping
2e78224 Add a missing comma to the warning message
7499700 Add a flag to warn about system files
fff9f6d Rename flags again and use variablewatch for cli
786e269 Add warn-unused to the Qt interface
636e6c4 Default to marking things as used
4ff0340 Rename find-unused to warn-unused
d7999e9 Rename strict-mode to warn-uninitialized
e141bc9 Detect unused variables
d3e8eb5 Add flags to detect unused variables
f332e14 Complete strict-mode checks for uninitialized vars
52f9637 Add method to get the local scope variables
f794d58 Make --strict-mode option, and integrate with cmake-gui
48b5b85 Add a warning when variables are used uninitialized.
cd626ea For macros make sure the FilePath points to a valid pointer in the args.
During a try_compile cmGlobalGenerator::EnableLanguage uses results from
the outer project. Reject attempts to enable languages in the test
project that are not "ready" in the outer project. Mark a language as
"ready" when all its information has been loaded and we are ready to
generate build rules.
This also avoids infinite recursion introduced by commit 295b5b60 (Honor
CMAKE_USER_MAKE_RULES_OVERRIDE in try_compile, 2010-06-29) for projects
that set CMAKE_USER_MAKE_RULES_OVERRIDE to a file that uses try_compile.
The file is loaded along with the information for a given langauge so
the language is not yet "ready".
Previously this was used only in multi-configuration generators to
choose the configuration of try_compile and try_run at their build time.
Teach CMake to honor the variable in single-configuration generators as
the CMAKE_BUILD_TYPE.
Teach the ArgumentExpansion test to expect flattened lists as has always
been the case in the CMake language. Now that the test should pass
enable the failure regex even when CMAKE_STRICT is not on. Replace the
reference to the old ArgumentExpansion test behavior in the workaround
comment in cmMakefile::TryCompile with a full inline explanation.
ce28737 Remove usage of CMAKE_CURRENT_LIST_DIR now that we have CMP0017
7db8db5 Improve documentation and messages for the new CMP0017
db44848 Prefer files from CMAKE_ROOT when including from CMAKE_ROOT
1e69c6f Merge branch 'user-policy-defaults' into policy-CMP0017
65a0a2a Merge branch 'include-command-whitespace' into policy-CMP0017
This patch makes include() and find_package() prefer cmake files
located in CMAKE_ROOT over those in CMAKE_MODULE_PATH.
This makes sure that the including file gets that file included
which it expects, i.e. the one from cmake with which it was tested.
It only changes behaviour when such an included file exists both
in CMAKE_MODULE_PATH and in CMAKE_ROOT.
This comes together with a new policy CMP0017, with default
behaviour it behaves as it always did, but warns.
With NEW behaviour it includes the file from CMAKE_ROOT
instead from CMAKE_MODULE_PATH. This fixes (if CMP0017 is set)
building KDE 4.5 with cmake >= 2.8.3.
Also a basic test for this policy in included.
4499d50 Mark CustomCommand test perconfig.out as SYMBOLIC
f0cdb60 Introduce "generator expression" syntax to custom commands (#11209)
4749e4c Record set of targets used in cmGeneratorExpression
ef9e9de Optionally suppress errors in cmGeneratorExpression
45e1953 Factor per-config sample targets out of 'Testing' test
4091bca Factor generator expression docs out of add_test
bfb7288 Record backtrace in cmCustomCommand
One of Cygwin's goals is to build projects using the POSIX API with no
Windows awareness. Many CMake-built projects have been written to test
for UNIX and WIN32 but not CYGWIN. The preferred behavior under Cygwin
in such projects is to take the UNIX path but not the WIN32 path.
Unfortunately this change is BACKWARDS INCOMPATIBLE for Cygwin-aware
CMake projects! Some projects that previously built under Cygwin and
are Cygwin-aware when they test for WIN32 may now behave differently.
Eventually these projects will need to be updated, but to help users
build them in the meantime we print a warning about the change in
behavior. Furthermore, one may set CMAKE_LEGACY_CYGWIN_WIN32 to request
old behavior during the transition.
Normally we avoid backwards incompatible changes, but we make an
exception in this case for a few reasons:
(1) This behavior is preferred by Cygwin's design goals.
(2) A warning provides a clear path forward for everyone who may see
incompatible behavior, and CMAKE_LEGACY_CYGWIN_WIN32 provides a
compatibility option. The warning and compatibility option both
disappear when the minimum required version of CMake in a project is
sufficiently new, so this issue will simply go away over time as
projects are updated to account for the change.
(3) The fixes required to update projects are fairly insignificant.
Furthermore, the Cygwin distribution has no releases itself so project
versions that predate said fixes tend to be difficult to build anyway.
(4) This change enables many CMake-built projects that did not
previously build under Cygwin to work out-of-the-box. From bug #10122:
"I have built over 120 different source packages with (my patched)
CMake, including most of KDE4, and have found that NOT defining
WIN32 on Cygwin is much more accurate." -- Yaakov Selkowitz
A fully compatible change would require patches on top of these project
releases for Cygwin even though they otherwise need not be aware of it.
(5) Yaakov has been maintaining a fork of CMake with this change for the
Cygwin Ports distribution. It works well in practice. By accepting the
change in upstream CMake we avoid confusion between the versions.
CMake itself builds without WIN32 defined on Cygwin. Simply disable
CMAKE_LEGACY_CYGWIN_WIN32 explicitly in our own CMakeLists.txt file.
The target_link_libraries command requires its first argument to be a
target in the current directory. Document this and update the error
message to be more specific. While at it, format the error message with
a call stack.
Commit e01cce28 (Allow add_dependencies() on imported targets,
2010-11-19) started using cmMakefile::FindTargetToUse to follow
dependencies, including those of GLOBAL_TARGETs like INSTALL and
PACKAGE. Since global targets exist in every directory, dependencies
between them must be traced within each directory too.
Teach FindTargetToUse to check the current directory before checking
globally. For global targets this will find the local copy. For for
normal targets this will be a no-op because they are globally unique.
Factor out reading of CMAKE_CONFIGURATION_TYPES and CMAKE_BUILD_TYPE
into cmMakefile::GetConfigurations. Read the former only in
multi-config generators.
These were implementation details of the unused methods
cmMakefile::RegisterData
cmMakefile::LookupData
We simply remove the methods, members, and class cmData.
Prepare to switch to the workflow described by "git help workflows". In
this workflow, the "master" branch is always used to integrate topics
ready for release. Brand new work merges into a "next" branch instead.
We need a new versioning scheme to work this way because the version on
"master" must always increase.
We no longer use an even/odd minor number to distinguish releases from
development versions. Since we still support cvs checkout of our source
tree we cannot depend on "git describe" to compute a version number
based on the history graph. We can use the CCYYMMDD nightly date stamp
to get a monotonically increasing version component.
The new version format is "major.minor.patch.(tweak|date)". Releases
use a tweak level in the half-open range [0,20000000), which is smaller
than any current or future date. For tweak=0 we do not show the tweak
component, leaving the format "major.minor.patch" for most releases.
Development versions use date=CCYYMMDD for the tweak level. The
major.minor.patch part of development versions on "master" always
matches the most recent release.
For example, a first-parent traversal of "master" might see
v2.8.1 2.8.1.20100422 v2.8.2
| | |
----o----o----o----o----o----o----o----o----
Since the date appears in the tweak component, the next release can
increment the patch level (or any more significant component) to be
greater than any version leading to it. Topic branches not ready for
release are published only on "next" so we know that all versions on
master lead between two releases.
Previously we silently ignored such calls and set nothing. The commit
"Initialize directory scope with closure of parent" inroduced a bad test
for the top scope. This commit fixes the test to avoid dereferencing a
null pointer, and adds a warning when the case is encountered.
We revert commit "Create CMake Policy CMP0015 to fix set(CACHE)" because
the NEW behavior of the policy breaks a valid use case:
# CMakeLists.txt
option(BUILD_SHARED_LIBS "..." ON)
add_library(mylib ...)
set(BUILD_SHARED_LIBS OFF) # we want only mylib to be shared
add_subdirectory(ThirdParty)
# ThirdParty/CMakeLists.txt
option(BUILD_SHARED_LIBS "..." ON)
# uh, oh, with NEW behavior this dir uses shared libs!!!
We'll re-introduce the policy later with a different change in behavior
to resolve the motivating case, which was more subtle but less common.
See issue #9008.
In cmMakefile::AddCacheDefinition we collapse paths specified in PATH or
FILEPATH cache entries originally specified on the command line with
UNINITALIZED type. This commit fixes the logic to avoid collapsing
<var>-NOTFOUND and other false values. The change allows other CMake
code to force a NOTFOUND value on an entry with UNINITALIZED type.
This method is called during ConfigureFinalPass on every target. It
gives each target a chance to do some final processing after it is known
that no more commands will affect it. Currently we just call the old
AnalyzeLibDependencies that used to be called directly.
This commit creates target and directory properties to enable the Intel
interprocedural optimization support on Linux. Enabling it adds the
compiler option '-ipo' and uses 'xiar' to create archives.
See issue #9615.
This creates cmTarget::GetFeature and cmMakefile::GetFeature methods to
query "build feature" properties. These methods handle local-to-global
scope and per-configuration property lookup. Specific build features
will be defined later.
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
In cmMakefile::AddSubDirectory we were checking for addition of the same
source directory multiple times. However, the check code was incorrect
because it compared pointers instetad of pointed-to strings. Since the
check was written, a better check was added right after it to enforce
unique binary directories (in which case duplicate sources are fine).
This commit simply removes the old-style check code.
The commit "Improve dynamic variable scope implementation" optimized
function scopes using an efficient parent scope pointer. However, the
parent scope used to initialize a new directory might not exist later
(like add_subdirectory called inside a function of the parent scope).
This caused CMake to crash when following the dangling pointer to the
original parent scope.
We fix the problem in this commit by always computing the closure of the
parent scope at directory initialization time so that no parent scope
pointer is needed. See issue #9538.
The set(CACHE) and option() commands should always expose the cache
value. Previously we failed to expose the value when it was already set
if a local variable definition hid it. When set to NEW, this policy
tells the commands to always remove the local variable definition to
expose the cache value. See issue #9008.
The boolean overload of this method was used only to implement option().
We re-implement option() in terms of the main method and removes the
now-unused signature. This removes some duplicate code that had already
fallen behind on changes (it was not removing the local definition
instead of setting it).
The try_compile command builds the cmTryCompileExec executable using the
cmTryCompileExec/fast target with Makefile generators in order to save
time since dependencies are not needed. However, in project mode the
command builds an entire source tree that may have dependencies.
Therefore we can use the /fast target approach only in one-source mode.
In cmMakefile we save all invoked commands so that FinalPass can be
called on them later. Most commands have no final pass, so we should
keep only the few that do.
Previously each new variable scope (subdirectory or function call) in
the CMake language created a complete copy of the key->value definition
map. This avoids the copy using transitive lookups up the scope stack.
Results of queries answered by parents are stored locally to maintain
locality of reference.
The class cmDefinitions replaces cmMakefile::DefinitionsMap, and is
aware of its enclosing scope. Each scope stores only the definitions
set (or unset!) inside it relative to the enclosing scope.
In CMake 2.6.3 and below we silently accepted duplicate build
directories whose build files would then conflict. At first this was
considured purely a bug that confused beginners but would not be used in
a real project. In CMake 2.6.4 we explicitly made it an error.
However, some real projects took advantage of this as a "feature" and
got lucky that the subtle build errors it can cause did not occur.
Therefore we need a policy to deal with the case more gracefully.
See issue #9173.
Previously we rejected all preprocessor definition values containing
spaces for the VS6 IDE generator. In fact VS6 does support spaces but
not in combination with '"', '$', or ';', and only if we use the sytnax
'-DNAME="value with spaces"' instead of '-D"NAME=value with spaces"'.
Now we support all definition values that do not have one of these
invalid pairs. See issue #8779.
The add_definitions() command and COMPILE_DEFINITIONS dir/tgt/src
properties support preprocessor definitions with values. Previously
values were not supported in the VS6 generator even though the native
tool supports them. It is only values with spaces that VS6 does not
support. This enables support and instead complains only for values
with spaces. See issue #8779.
This moves code which generates ADD_TEST and SET_TESTS_PROPERTIES calls
into CTestTestfile.cmake files out of cmLocalGenerator and into a
cmTestGenerator class. This will allow more advanced generation without
cluttering cmLocalGenerator. The cmTestGenerator class derives from
cmScriptGenerator to get support for per-configuration script
generation (not yet enabled).
The second argument of add_subdirectory must name a unique binary
directory or the build files will clobber each other. This enforces
uniqueness with an error message.
This defines global, directory, and target properties
RULE_LAUNCH_COMPILE, RULE_LAUNCH_LINK, and RULE_LAUNCH_CUSTOM. Their
values specify 'launcher' command lines which are prefixed to compile,
link, and custom build rules by Makefile generators.
This teaches cmMakefile::GetProperty and cmake::GetProperty methods to
return NULL when the property name is NULL, making them more robust and
consistent with the behavior of cmTarget::GetProperty.
Isolation of policy changes inside scripts is important for protecting
the including context. This teaches include() and find_package() to
imply a cmake_policy(PUSH) and cmake_policy(POP) around the scripts they
load, with a NO_POLICY_SCOPE option to disable the behavior. This also
creates CMake Policy CMP0011 to provide compatibility. See issue #8192.
This teaches functions and macros to use policies recorded at creation
time when they are invoked. It restores the policies as a weak policy
stack entry so that any policies set by a function escape to its caller
as before.
A 'weak' poilcy stack entry responds normally to queries. However,
setting a policy in a weak entry will recursively set the policy in the
next entry too. This also gives the internal interface to create a weak
entry the option to provide an initial PolicyMap for it.
This creates cmMakefile::PolicyPushPop to push and pop policy scope
automatically. It also enforces balanced push/pop pairs inside the
scope it handles.
This defines PolicyMap as a public member of cmPolicies. Its previous
role as a policy stack entry is now called PolicyStackEntry and
represented as a class to which more information can be added later.
If a logical block terminates with mismatching arguments we previously
failed to remove the function blocker but replayed the commands anyway,
which led to cases in which we failed to report the mismatch (return
shortly after the ending command). The recent refactoring of function
blocker deletion changed this behavior to produce an error on the ending
line by not blocking the command. Furthermore, the function blocker
would stay in place and complain at the end of every equal-level block
of the same type.
This teaches CMake to treat the begin/end commands (if/endif, etc.) as
correct and just warns when the arguments mismatch. The change allows
cases in which CMake 2.6.2 silently ignored a mismatch to run as before
but with a warning.
This centralizes construction of the error message for an unclosed
logical block (if, foreach, etc.). We record the line at which each
block is opened so it can be reported in the error message.
This uses a stack of 'barriers' to efficiently divide function blockers
into groups corresponding to each input file. It simplifies detection
of missing block close commands and factors it out of ReadListFile.
When a function blocker decides to remove itself we previously removed
it at every return point from the C++ scope in which its removal is
needed. This teaches function blockers to transfer ownership of
themselves from cmMakefile to an automatic variable for deletion on
return. Since this removes blockers before they replay their commands,
we no longer need to avoid running blockers on their own commands.
Previously bad arguments to an if() or elseif() would cause some
subsequent statements in the corresponding block to execute. This
teaches CMake to stop processing commands with a fatal error. It also
provides context to bad elseif() error messages.
The documentation of cmake_policy PUSH and POP states that they must
always match. Previously we enforced this only for the top scope of
each CMakeLists.txt file. This enforces the requirement for all files.
This creates the variable CMAKE_VERSION containing the full version of
cmake in "major.minor.patch" format. It is particularly useful with the
component-wise version comparison provided by the if() command.
Previously we stored a vector of tests to preserve their order.
Property set/get operations would do a linear search for matching tests.
This uses a map to efficiently look up tests while keeping the original
order with a vector for test file generation.
The cmMakefile::DefineFlagsOrig ivar was created to help preserve the
old DEFINITIONS property behavior now that definitions are moved from
DefineFlags to the COMPILE_DEFINITIONS directory property. This fixes
propagation of the original value into subdirectories.
After creating a utility target with AddUtilityCommand, return a pointer
to the cmTarget instance so the caller may further modify the target as
needed.
If the arguments to a command fail to parse correctly due to a syntax
error, the command should not be invoked. This avoids problems created
by processing of commands with bad arguments. Even though the build
system will not be generated, the command may affect files on disk that
persist across CMake runs.
Previously error messages produced by parsing of command argument
variable references, such as bad $KEY{VAR} syntax or a bad escape
sequence, did not provide good context information. Errors parsing
arguments inside macro invocations gave no context at all. Furthermore,
some errors such as a missing close curly "${VAR" would be reported but
build files would still be generated.
These changes teach CMake to report errors with good context information
for all command argument parsing problems. Policy CMP0010 is introduced
so that existing projects that built despite such errors will continue
to work.
This introduces the unset() command to make it easy to unset CMake
variables, environment variables, and CMake cache variables. Previously
it was not even possible to unset ENV or CACHE variables (as in
completely remove them). Changes based on patch from Philip Lowman.
See issue #7507.
The compatibility check to allow linking to modules should test for
CMake 2.2, not the unreleased 2.3. See issue #7500. Furthermore, the
message should be more clear about fixing the code instead of setting
CMAKE_BACKWARDS_COMPATIBILITY unless one is just trying to build an
existing project.
In the future some policies may be set to REQUIRED_IF_USED or
REQUIRED_ALWAYS. This change clarifies the error messages users receive
when violating the requirements.
- The property tracks the value formed by add_definitions
and remove_definitions command invocations.
- The string should be maintained for use in returning for the
DEFINITIONS property value.
- It is no longer used for any other purpose.
- The DEFINITIONS property was recently documented as deprecated.
- See bug #7239.
- Fix documentation of get_directory_property command.
- Convert its list of computed directory properties to be
defined/documented directory properties.
- CMake 1.8 and below did not do the check but could get in
infinite loops due to the local generate step.
- CMake 2.0 added the check but failed to perform it in directories
with no targets (see bug #678).
- CMake 2.2 removed the local generate which fixed the problem but
did not remove the check.
- Between CMake 2.4 and 2.6.0rc6 the check was fixed to work even
when no targets appear in a directory (see bug #6923).
- Bottom line: the check is no longer needed.
- Message for missing cmake_minimum_required is not issued
until the end of processing the top CMakeLists.txt file
- During processing a cmake_policy command may set behavior
- OLD behavior is to silently ignore the problem
- NEW behavior is to issue an error instead of a warning
- Add cmListFileBacktrace to record stack traces
- Move main IssueMessage method to the cmake class instance
(make the backtrace an explicit argument)
- Change cmMakefile::IssueMessage to construct a backtrace
and call the cmake instance version
- Record a backtrace at the point a target is created
(useful later for messages issued by generators)
- Remove CMP_0001 (no slash in target name) and restore
old CMAKE_BACKWARDS_COMPATIBILITY check for it
- Replace all checks of CMAKE_BACKWARDS_COMPATIBILITY
with cmLocalGenerator::NeedBackwardsCompatibility calls
- Create new CMP_0001 to determine whether or not
CMAKE_BACKWARDS_COMPATIBILITY is used.
(old = use, new = ignore)
- Show CMAKE_BACKWARDS_COMPATIBILITY in cache only when
CMP_0001 is set to OLD or WARN
- Update documentation of cmake_policy and cmake_minimum_required
to indicate their relationship and the 2.4 version boundary
- When no cmake policy version is set in top level makefile
implicitly call cmake_policy(VERSION 2.4) which restores
CMAKE_BACKWARDS_COMPATIBILITY and other 2.4 compatibility
- Fix tests MakeClean and Preprocess to call
cmake_policy(VERSION 2.6) because they depend on new policies
- Add cmMakefile methods IssueError and IssueWarning
- Maintain an explicit call stack in cmMakefile
- Include context/call-stack info in messages
- Nested errors now unwind the call stack
- Use new mechanism for policy warnings and errors
- Improve policy error message
- Include cmExecutionStatus pointer in call stack
so that errors deeper in the C++ stack under
a command invocation will become errors for the
command
- Re-enable enforcement in cmMakefile::EnforceUniqueName
- Improve error message to help user resolve the problem
- Fix Modules/CTestTargets.cmake to not duplicate testing targets
- Move commands used by the changes to Modules/CTestTargets.cmake
to build during bootstrap: DEFINE_PROPERTY, GET_PROPERTY
- Error if imported target is involved in conflict
- Error for non-imported target conflict unless
CMAKE_BACKWARDS_COMPATIBILITY <= 2.4
- Include OUTPUT_NAME property in error message
- Update add_executable and add_library command documentation
- Created cmExportFileGenerator hierarchy to implement export file generation
- Installed exports use per-config import files loaded by a central one.
- Include soname of shared libraries in import information
- Renamed PREFIX to NAMESPACE in INSTALL(EXPORT) and EXPORT() commands
- Move addition of CMAKE_INSTALL_PREFIX to destinations to install generators
- Import files compute the installation prefix relative to their location when loaded
- Add mapping of importer configurations to importee configurations
- Rename IMPORT targets to IMPORTED targets to distinguish from windows import libraries
- Scope IMPORTED targets within directories to isolate them
- Place all properties created by import files in the IMPORTED namespace
- Document INSTALL(EXPORT) and EXPORT() commands.
- Document IMPORTED signature of add_executable and add_library
- Enable finding of imported targets in cmComputeLinkDepends
"Command options() is not scriptable" is IMO better to understand than
"Command options not scriptable" (with all uppercase commands it was easier to see)
Alex
cmMakefile.cxx, but now in the platform files and are now valid for the
target platform, not the host platform.
New variables CMAKE_HOST_WIN32, CMAKE_HOST_UNIX, CMAKE_HOST_APPLE and
CMAKE_HOST_CYGWIN have been added in cmMakefile.cxx (...and have now to be
used in all cmake files which are executed before
CMakeSystemSpecificInformation.cmake is loaded). For compatibility the old
set is set to the new one in CMakeDetermineSystem.cmake and reset before the
system platform files are loaded, so custom language or compiler modules
which use these should still work.
Alex
working, for both the result was always empty, since
cmMakefile::GetProperty() recognized it as a special property, constructed a
correct return value and called cmMakefile::SetProperty() with this list of
directories, which then didn't actually set the property, but applied it to
the internal vector of include/link directories. The following
getPropertyValue in cmMakefile::GetProperty() then still didn't find it and
returned nothing. Now for all special property the static string output is
used and its content is returned. I'm not sure it is the right way to fix
this problem but at least it seems to work and it fixes the Paraview3 build
Alex
what autoconf does. This makes porting software from autoconf to cmake
easier, since it's easier to diff the resulting config headers.
Now the following
#cmakedefine HAVE_STRING_H 1
#cmakedefine HAVE_STRLCAT 1
produce:
#define HAVE_STRING_H 1
/* #undef HAVE_STRLCAT */
whereas before they produced:
#define HAVE_STRING_H 1
/* #undef HAVE_STRLCAT 1 */
Since it's commented out anyway, it's now change in behaviour.
Alex
something like this:
ENABLE_LANGUAGE(ASM-ATT)
IF(CMAKE_ASM-ATT_COMPILER_WORKS)
... do assembler stufff
ELSE(CMAKE_ASM-ATT_COMPILER_WORKS)
... fallback to generic C/C++
ENDIF(CMAKE_ASM-ATT_COMPILER_WORKS)
Alex
CMake-SourceFile2-bp and CMake-SourceFile2-b-mp1 to trunk. This
commit is surrounded by tags CMake-SourceFile2-b-mp1-pre and
CMake-SourceFile2-b-mp1-post on the trunk.
The changes re-implement cmSourceFile and the use of it to allow
instances to be created much earlier. The use of cmSourceFileLocation
allows locating a source file referenced by a user to be much simpler
and more robust. The two SetName methods are no longer needed so some
duplicate code has been removed. The strange "SourceName" stuff is
gone. Code that created cmSourceFile instances on the stack and then
sent them to cmMakefile::AddSource has been simplified and converted
to getting cmSourceFile instances from cmMakefile. The CPluginAPI has
preserved the old API through a compatibility interface.
Source lists are gone. Targets now get real instances of cmSourceFile
right away instead of storing a list of strings until the final pass.
TraceVSDependencies has been re-written to avoid the use of
SourceName. It is now called TraceDependencies since it is not just
for VS. It is now implemented with a helper object which makes the
code simpler.
write generators for IDE projects, which use already existing makefiles
(current the kdevelop generator)
-first stept of the export interface, iniitial export() command
-more replacements for the FIND_XXX docs
Alex
"imported" executable target. This can then be used e.g. with
ADD_CUSTOM_COMMAND() to generate stuff. It adds a second container for
"imported" targets, and FindTarget() now takes an additional argument bool
useImportedTargets to specify whether you also want to search in the
imported targets or only in the "normal" targets.
Alex
-add a RESULT_VARIABLE to INCLUDE()
-add CMAKE_TOOLCHAIN_FILE for specifiying your (potentially crosscompiling) toolchain
-have TRY_RUN() complain if you try to use it in crosscompiling mode (which were compiled but cannot run on this system)
-use CMAKE_EXECUTABLE_SUFFIX in TRY_RUN(), probably TRY_RUN won't be able to
run the executables if they have a different suffix because they are
probably crosscompiled, but nevertheless it should be able to find them
-make several cmake variables presettable by the user: CMAKE_C/CXX_COMPILER, CMAKE_C/CXX_OUTPUT_EXTENSION, CMAKE_SYSTEM_NAME, CMAKE_SYSTEM_INFO_FILE
-support prefix for GNU toolchains (arm-elf-gcc, arm-elf-ar, arm-elf-strip etc.)
-move ranlib on OSX from the file command to a command in executed in cmake_install.cmake
-add support for stripping during install in cmake_install.cmake
-split out cl.cmake from Windows-cl.cmake, first (very incomplete) step to support MS crosscompiling tools
-remove stdio.h from the simple C program which checks if the compiler works, since this may not exist for some embedded platforms
-create a new CMakeFindBinUtils.cmake which collects the search fro ar, ranlib, strip, ld, link, install_name_tool and other tools like these
-add support for CMAKE_FIND_ROOT_PATH for all FIND_XXX commands, which is a
list of directories which will be prepended to all search directories, right
now as a cmake variable, turning it into a global cmake property may need
some more work
-remove cmTestTestHandler::TryExecutable(), it's unused
-split cmFileCommand::HandleInstall() into slightly smaller functions
Alex
add_custom_target() as COMMAND, and cmake will recognize them and replace
them with the actual output path of these executables. Also the dependency
will be added automatically. Test included.
ENH: moved TraceVSDependencies() to the end of GlobalGenerator::Configure(),
so it is done now in one central place
Alex
the stack (usually CMakeCInformation.cmake and CMakeCXXInformation.cmake
which both put Linux-gcc.cmake on the stack without removing it again:
INCLUDE(... OPTIONAL) )
STYLE: better readable output formatting of the listfile stack, now in the
same order as in gdb or with include files
Alex
Ben Boeckel
Stephen Kelly
Brad King
Nils Gladitz
Clinton Stimpson
Rolf Eike Beer
Robert Maynard
Nicolas Despres
Andreas Mohr
Yury G. Kudryashov
Petr Kmoch
Peter Kümmel
David Cole
Brian Helba
Modestas Vainius
Alex Neundorf
Bill Hoffman
Ken Martin
Amitha Perera
Andy Cedilnik