Port most CMakeTestBadCommandLines test cases to RunCMake.CommandLine
and drop the former test. Add validation of expected results, which was
not done by the old test.
882f48e5 Link libraries by full path even in implicit directories
318cd370 Help: Add link target for Find Modules section of cmake-developer.7
1535dcd8 Tests: Teach RunCMake to optionally merge command output to stdout
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
Prefix test commands with the CROSSCOMPILING_EMULATOR property
for target executables. This allows test suites to be run on the host
when crosscompiling.
If the CMAKE_CROSSCOMPILING_EMULATOR variable is defined, and
CMAKE_CROSSCOMPILING is TRUE, then use CMAKE_CROSSCOMPILING_EMULATOR to run
the try_run executables. This prevents the need to populate
TryRunResults.cmake when cross compiling.
Add CROSSCOMPILING_EMULATOR target property for executables. This is used by
subsequent patches to run exectuables created for the target system when
crosscompiling. The property is initialized by the
CMAKE_CROSSCOMPILING_EMULATOR variable when defined.
Some tests may need to read "cmake --build" output passed through from
native build tools and do not know if it will be on stdout or stderr.
Optionally use the same variable for the execute_process output so
that it merges them and we can always match using expected stdout.
RPM, DEB and archive packages were not created
in cases when CPACK_<generator>_COMPONENT_INSTALL
was set to ON and a single component existed.
Patch also changes CPackRPM test to implicitly
test for this case.
Otherwise an #include directive on the first line of a source file is
ignored if the file contains a Byte-Order-Mark.
Suggested-by: Aleksey Konovalov <konovalov.aleks@gmail.com>
Add policy CMP0059 to cover this change. The property has been
deprecated since CMake 2.4 anyway.
This will help clean up cmMakefile -- the DefineFlagsOrig member should
not need to exist.
When matching ctest command-line output, we must account for the
formatting of times that take 10 seconds or more. The values are
right-justified, so use " +" to match any amount of space before them.
Revert commit v3.0.0-rc1~175^2~20 (add_dependencies: Disallow use with
INTERFACE_LIBRARY, 2013-12-25). Teach our dependency analysis to
transitively follow INTERFACE target utility dependencies as was done or
IMPORTED targets in commit v2.8.6~127^2~1 (Allow add_dependencies() on
imported targets, 2010-11-19). Extend the InterfaceLibrary test with a
case to cover header generation for a header-only INTERFACE library via
a custom target.
Extend the ``DATA{Dir/,...}`` syntax with a new ``RECURSE:`` option
to enable recursive matching of associated files. This will allow
an entire directory tree of data to be referenced at once.
bd9c7f9b Ninja: Add policy to require explicit custom command byproducts
ed8e30b0 cmGlobalNinjaGenerator: Optimize handling of known build outputs
ad094f43 cmGlobalNinjaGenerator: Fix spelling of "unknown"
82a37d3c cmGlobalNinjaGenerator: Drop unused member
Add policy CMP0058 to avoid generating 'phony' ninja rules for unknown
custom command dependencies. This requires projects to specify their
custom command byproducts explicitly. With this requirement we no
longer have to assume that unknown custom command dependencies are
generated and can instead simply assume they are source files expected
to exist when the build starts. This is particularly important in
in-source builds. It is also helpful for out-of-source builds to allow
Ninja to diagnose missing files before running custom command rules that
depend on them.
GLOB lists directories by default and GLOB_RECURSE does not.
LIST_DIRECTORIES enables user to control the behavior explicitly for
consistently for both GLOB and GLOB_RECURSE.
Implement a brand new FindMatlab module:
- Add support for versions and components.
- Find Matlab and its version in a more precise and multiplatform way.
- Add API to create a new mex extension with documentation.
- Add API to add matlab unit tests (with or without the unit test framework).
- Find as much as possible based on a single Matlab_ROOT_DIR cache entry
and allow the user to change it to re-find everything.
232a6883 Help: Add release notes for target-language-genex.
9e168941 File(GENERATE): Process genex evaluation files for each language.
b734fa44 Genex: Allow COMPILE_LANGUAGE when processing include directories.
0b945ea9 Genex: Allow COMPILE_LANGUAGE when processing compile definitions.
5c559f11 Genex: Enable use of COMPILE_LANGUAGE for compile options.
e387ce7d Genex: Add a COMPILE_LANGUAGE generator expression.
4a0128f4 VS6: Compute CMAKE_*_FLAGS and COMPILE_DEFINITIONS* only when needed
Move the test cases from Tests/CMakeTests/ConfigureFileTest.cmake.in
over to use the RunCMake.configure_file infrastructure. This does much
more robust verification of CMake output for each test case, and would
have caught the regression fixed in our parent commit.
A more-specific error message is always displayed earlier in the
output if any real error occurred. This final summary message
is distracting to readers searching through the output for the
word "error". Simply drop it.
Allow URL templates to contain a %(algo:<key>) placeholder that is
replaced by mapping the canonical hash algorithm name through a map
defined by the <key>.
Extend the Module.ExternalData test to cover the behavior.
Extend the RunCMake.ExternalData test to cover error cases.
e2b9e7f7 Tests: Drop unnecessary stderr matching from RunCMake.ctest_memcheck
7ce9f6e2 Tests: Teach RunCMake to tolerate 'Error kstat returned' lines in test output
69de0f7e Tests: Teach RunCMake to tolerate Guard Malloc lines in test output
57f2aa7c Tests: Teach RunCMake to tolerate BullseyeCoverage lines in test output
b04c8ec3 Tests: Match curl error in RunCMake.ctest_submit FailDrop-* cases
1d82105e Tests: Rename RunCMake.{CTestMemcheck => ctest_memcheck}
d7662141 Tests: Rename RunCMake.{CTestSubmit => ctest_submit}
9b50388b Tests: Split RunCTest helper out of RunCMake.CTest(Submit|Memcheck)
76e7c22b Tests: Rename RunCMake.CTestMemcheck internals to match CTestSubmit
Otherwise find_library is unable to lookup the XCTest framework which
is not located in the SDK serach path:
In the 10.10 SDK the SDK frameworks are located here:
$DEVELOPER_DIR/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/System/Library/Frameworks
whereas the Platform SDKs are located here:
$DEVELOPER_DIR/Platforms/MacOSX.platform/Developer/Library/Frameworks
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
If a feature is added multiple times via ADD_FEATURE_INFO it should
appear only once in FEATURE_SUMMARY.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
bb9d71b4 Replace loops with algorithms.
4afe6c26 cmAlgorithms: Add cmReverseRange adaptor.
a3a0a8c2 cmAlgorithms: Add cmFindNot algorithm.
8c74a41f cmRST: Replace two erase with a rotate and larger erase.
61fe1919 cmAlgorithms: Update concept requirement to FowardIterator
09d6125b cmAlgorithms: Move cmRotate out of 'implementation detail' namespace.
8ed6ecac cmRST: Move two algorithms beside each other.
dfe49c20 cmRST: Use std::min where appropriate.
21b0654a cmGlobalGenerator: Convert set insert algorithm to vector algorithms.
416df93a Convert some raw loops to cmWrap.
37b88d34 cmAlgorithms: Add cmWrap.
a2818093 Use cmJoin where possible.
76207b08 cmCacheManager: Replace loop with algorithm.
60c3bb73 cmGlobalGenerator: Replace loop with algorithm.
05fec779 cmTarget: Port loop to algorithm.
9c225767 cmGlobalGenerator: Replace set::insert algorithm with cmRemoveDuplicates.
...
The Dummy*-stderr.txt files were needed only to match platform-specific
memcheck tooling output and verify that stderr is otherwise empty. Now
that the RunCMake infrastructure knows how to strip such lines before
matching, we can simply drop these files and use the default empty
string match.
When RunCMake tests run on Solaris, the output may contain unexpected
lines of the form "Error kstat returned...". These lines are printed by
SystemInformationImplementation::RunProcess when called from
SystemInformationImplementation::ParseValueFromKStat (see issue #12066).
Until someone investigates why kstat returns values outside the range it
documents, simply remove such lines from the actual output before
matching it against the expected output.
When RunCMake tests run under Xcode Guard Malloc, Guard Malloc may add
lines of the form "<tool>(<pid>) malloc:..." to the output. Remove such
lines from the actual output before matching it against the expected
output.
When RunCMake tests run under dynamic analysis, Bullseye may add lines
of the form "BullseyeCoverage..." to the output. Remove such lines from the
actual output before matching it against the expected output.
The find_package command already knows how to compute installation
prefixes from PATH. Use the same approach to establish prefixes for
find_library, find_file, and find_path to use to look in directories
like "<prefix>/lib[/<arch>]" and "<prefix>/include" for libraries and
headers. This will reduce the amount of configuration end users need to
do to establish a work environment rooted under a specific prefix.
Several tests use slight variations of the same logic to enable CPack
RPM tests. Consolidate this logic into one check before any tests are
added. Look for 'rpmbuild' only on Linux and only when the test build
tree does not have spaces in the path. In particular, this will make
the result available in time for the RunCMake.CPackRPM test to be
activated even if CMake is configured exactly once.
This will allow per-config destinations for targets in EXPORT sets.
Using multiple install(TARGETS) with separate CONFIGURATIONS is
rejected as a target appearing more than once in an export set.
Now instead one can write
install(TARGETS foo EXPORT exp DESTINATION lib/$<CONFIG>)
to get a single logical membership of the target in the export set
while still having a per-config destination.
The moved tests are related to paths in INTERFACE_INCLUDE_DIRECTORIES
in general, and when exporting, and covering cases of the install
location being within the build or source prefix etc. Other build
properties containing paths should have similar tests, so this
allows some parameterization while keeping the preparation of the
various directory structures.
Define an empty string in CMAKE_<LANG>_STANDARD_DEFAULT to mean that
the toolchain has no notion of lanuage standard levels. In this case
the <LANG>_STANDARD[_REQUIRED] properties will have no effect.
Update the RunCMake.CompileFeatures test to exclude the
LinkImplementationFeatureCycle test when there is no standard default.
It can never fail because no use of specific features will adjust the
CXX_STANDARD level required for any target since the standard levels
have no meaning in this case.
With the Makefile generators we expect that touching or modifying the
input file of a configure_file, or removing its output, will cause CMake
to re-run on the next build. Extend the RunCMake.configure_file test
with a case covering this. Also check that CMake does not re-run if
nothing has changed.
With the Makefile and Ninja generators we expect that touching the input
source file for a try_compile will cause CMake to re-run on the next
build. Extend the RunCMake.try_compile test with a case covering this.
Also check that CMake does not re-run if nothing has changed.
Read file names from the lines of a specified file. Reject input lines
starting in '-' to leave room for option parsing to be added later. Add
just '--add-file=' now to allow files starting in '-' to be specified.
d0adcccb try_run: Add tests for LINK_LIBRARIES with mock libraries.
223c5cb7 try_run: Add test for bad link libraries.
e2b1f058 try_run: Add support for LINK_LIBRARIES option.
Most functionality is already implemented in Source/cmCoreTryCompile.{h,cxx}.
Document and improve argument parsing.
This functionality is already being used by a number of modules, like
CheckCSourceCompiles.cmake, but it is not documented.
f3e0b6f1 CTestCoverageCollectGCOV: Add module to run gcov
6dd980e0 ctest_submit: Make CDASH_UPLOAD mode arguments more strict
5dc33f89 ctest_submit: Add CDASH_UPLOAD mode to upload files to CDash
When curl is given a URL of the form '<something>://' it tries to
resolve '<something>' as a host name. If the host happens to exist and
have a server then the drop might actually appear to work. Instead use
an explicit '-no-site-' host to ensure it cannot connect.
Reported-by: Gilles Khouzam <Gilles.Khouzam@microsoft.com>
Add an option to set the mtime of entries in a tarball so that one can
create a tarball with a consistent content hash (e.g. MD5) for a given
set of files regardless of their current timestamps on disk. This will
be useful for submission of tarballs to CDash, which tracks content
hashes to avoid duplication.
Inspired-by: Bill Hoffman <bill.hoffman@kitware.com>
004e1540 Features: Record for GNU 4.4.
2a5ca650 Features: Wrap failure-test in UNIX condition.
1ae2c6b2 Features: Blacklist cxx_constexpr test for GNU 4.5.
c66e3317 Features: Use a more-common feature in cycle-test.
c43a6dc5 Features: Update comment in test to match the code.
78259135 Features: Test presence of cxx_auto_type with genex.
7b9fc88b Features: Remove outdated comment.
Replace the TODO comment with calls to run_ctest_submit_FailDrop. For
now leave curl errors out of expected stderr. They can be ported over
from CTestTestFailedSubmit-* tests later.
Cover command invocation argument errors. Prepare infrastructure
to cover failed 'drop' cases, but do not cover them yet because
we need to collect error messages from each platform.
We require that the $<$<COMPILE_FEATURES:cxx_feature>:empty2> generates
a '1' when CXX11 is enabled. GNU 4.4 does not support cxx_nullptr, but
does support cxx_auto_type.
770ba876 Help: Add notes for topic 'GNU-4.6-compile-features'
b15c008f Features: Record for GNU 4.6.
f13a2eb1 Features: Adjust the RunCMake test to use more-common features.
1f19ac4d Features: Adjust cxx_variadic_templates unit test for GNU < 4.7.
0798d1e5 Features: Extend the generalized_initializers test for GNU < 4.7.
938bd94e Features: Test __GXX_EXPERIMENTAL_CXX0X__ macro for GNU < 4.7 compatibility.
462c630b Features: Don't test __cplusplus value for CXX98 on GNU.
222ec86f Features: Test an old value of __STDC_VERSION__ for GNU < 4.7 compatibility.
6e909035 Features: Record C/CXX dialect flags for GNU 4.6.
bfc995cc Features: Remove wrong content from else() condition.
1532b921 Features: Make cxx_noexcept available from GNU 4.6.
1f4649e6 Features: Update the default_dialect test for old GNU-like compilers.
a60027a6 Features: Ensure appropriate return value from feature test macros.
Add support for a special URL template to map the fetch operation
to a project-specified .cmake script insead of using file(DOWNLOAD).
Extend the Module.ExternalData test to cover the behavior.
Extend the RunCMake.ExternalData test to cover error cases.
The second hunk of commit 07d1f6fc (Features: Properly evaluate if the
compiler supports cxx_final, 2014-12-31) was a workaround for a bug in
the COMPILE_FEATURES generator expression that caused it never to return
0. Revert the workaround so we can fix the bug instead.
Revert commits:
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
This topic was merged to master prematurely, so remove it.
Commit v3.1.0-rc1~297^2~5 (cmTarget: Drop 'head' argument from
GetSourceFiles, 2014-07-10) exposed a dormant bug in source file computation,
causing the test case to regress. After that commit, the source file
computation and caching finds an existing container of source files. Prior to
that patch, the GetSourceFiles method was called with either a null pointer
for the head cmTarget, or it was called with the this pointer. The
processSources method is eventually called, which normalizes the difference
between the null pointer and the this pointer for the head target. However,
the cache key depends on the actual pre-normalized pointer. The change in
that commit caused the entry to be found in the cache where it was not before,
which resulted in incorrect behavior.
Prior to that commit, the test case also fails if the GetSourceFiles overload
taking a vector<cmSourceFile*> is changed to normalize the head target at
the beginning of the method:
cmTarget const* head = head_ ? head_ : this;
Such a construct was correctly used in other locations where similar caching
was in place, before being removed in commit v3.1.0-rc1~310^2~25 (cmTarget:
Remove 'head' argument from GetLinkInformation, 2014-06-12), but is not
neccessary anymore.
Commit v3.1.0-rc1~674^2~2 (cmTarget: Cache the cmSourceFiles in
GetSourceFiles., 2014-04-05) introduced the caching, but fails the test case
for an unrelated reason. That unrelated error was introduced in
commit v3.1.0-rc1~688^2~5 (cmTarget: Allow any generator expression in
SOURCES property., 2014-03-18) and fixed in
commit v3.1.0-rc1~561^2~1 (cmTarget: Fix listing of source files at
configure-time., 2014-04-13).
All commits which fail the test case in the testable way do so when such a
cached version of the source files is found and returned at generate
time. In the test case, the cached content is populated at configure-time
through the use of the deprecated LOCATION property with CMP0026 OLD. The
cached content is an empty container for the bar target in the test case,
because its source file 'foo.cpp.o' is not known until generate-time. That
means that no source files are available to compute the link language and
the reported error is issued.
The actual problem is that the SourceFilesMap should be cleared after
configure time by cmTarget::ClearLinkMaps. Clear it there now.
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
a15675ef Features: Quote all compiler names when comparing with COMPILER_ID
07d1f6fc Features: Properly evaluate if the compiler supports cxx_final.
6296192d Features: Add a comment explaining part of test.
c13656e7 Features: Test nullptr as a side-effect activation of static_assert.
3e34e833 Features: Test feature propagation with more-common features.
b3e86f4e Features: Test an expectation of whether OVERRIDE_CONTROL is expected
Notes:
VS2015 and above are the only MSVC versions to support cxx_final, so remove
usages from the tests, and instead only test for cxx_override.
VS2012 and above to conform to cxx_decltype_incomplete_return_types
proposal, but without support for auto return types the dcl.type.simple
example in the proposal doesn't compile.
VS2013 and above to conform to the updated cxx_contextual_conversions proposal,
but VS2010 and above pass the test.
Compilers such as MSVC have no explicit flags to enable C++11 mode,
it just is always on. So only run the link tests with compilers that require
a flag to specify the language version.
Previously we expanded HAVE_FINAL to determine what the copied_file number
would be, but when we don't have cxx_final than HAVE_FINAL is not defined.
What we really want is to use expected_result.
For complex*, CustomCommand and OutDir tests, non-ascii paths
are avoided in test code by using relative paths, and setting
the working when running the test. This also avoids the
need to internationalize the test code.
For RunCMake.GeneratorExpression, use a UTF-8 encoding in
file(STRINGS) to retrieve the compiled absolute path correctly.
Expect tests to specify stderr content if it is present.
Fix the CMP0019 test, which has only been testing the WARN status
until now. Specify in the CommandLine and FPHSA tests that content
is at least one character.
Set policies in the Language and CheckModules tests, which have empty
test output, modulo unrelated policies on some platforms.
Mark the generated source file with the GENERATED property explicitly
since it is not marked automatically as the output of any custom
command. Mark both the 0 and 1 variants so it works no matter the
outcome of the generator expression.
The CTestTestMemcheck test cases all try to check the ctest output with
a regular expression. They fail intermittently due to ordering of the
portions of the output that come from stdout and stderr being mixed.
Convert all the test cases to use the RunCMake infrastructure to match
stdout and stderr separately.
We use cmGlobalGenerator::GetDirectoryContent to avoid repeating
directory listings. However, GetDirectoryContent loads content from
disk at most once. This breaks find_library calls that occur when disk
content has changed since preceding find_library calls.
Teach cmGlobalGenerator::GetDirectoryContent to save the directory
modification time when content is loaded and re-load content if it
changes.
Create a RunCMake.find_library test with a case covering this.
Copy CMAKE_EXE_LINKER_FLAGS into the test project generated by
try_compile, just like we already copy CMAKE_<LANG>_FLAGS.
Add CMake Policy CMP0056 to activate this behavior in a compatible way,
but do not warn by default when the policy is not set since it will
affect all try_compile calls.
Extend the RunCMake.try_compile test with a case covering this behavior
for each policy setting.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
8a75c7ef Help: Document the export limitation of INTERFACE_SOURCES.
e1348056 Export: Disallow export of targets with INTERFACE_SOURCES
bb5905bb cmTarget: Don't allow relative paths in INTERFACE_SOURCES
This can be allowed in the next release, but it needs to have some
features present and tested such as
* Ensuring that relative paths do not appear in the generated property.
* Ensuring that paths to the source or build directories do not appear.
* Generating a check in the file for CMake 3.1 or later so that the
resulting property will be consumed.
* Ensuring that any referenced targets are part of an export set and
generating a check for them.
* INSTALL_INTERFACE and BUILD_INTERFACE content.
All of these checks are already done for INTERFACE_INCLUDE_DIRECTORIES,
but it is too late to add them for INTERFACE_SOURCES for CMake 3.1.
As the checks introduce some new error conditions, it is better to
disallow exporting fully for this case and introduce proper error
conditions later instead of policies.
Follow the pattern of checks that are made for INTERFACE_INCLUDE_DIRECTORIES.
Existence is already checked by cmSourceFile::GetFullPath. Add a check
to disallow relative paths in source directories. Otherwise code such as
target_sources(lib1 INTERFACE foo.cpp)
would fail if consumed by a target in a different directory.
Unlike the INTERFACE_INCLUDE_DIRECTORIES behavior, we don't care whether
the entry comes from an IMPORTED target or not. In the include directories
case, the directory for a non-imported target might not exist yet but
might be created. In the sources case, a file which does not yet
exist in the filesystem must be explicitly marked with the GENERATED
property.
Adjust existing tests and add a new test for the error.
Extend the write_compiler_detection_header interface to allow
specifying a location for supplementary files, and getting the
list of resulting files as a variable.
Re-run if the input file changes or if the output file is removed.
This only works with the Makefile generators currently. The limitation
of the Ninja generator is tracked as issue #15256. The IDE
generators will need larger refactoring as they currently rely on
being able to determine the depends and output files at the start of
generate-time, which is too early for the file(GENERATE) case.
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
The evaluation files must be known before cmTargetTraceDependencies
attempts to find them, but we must actually generate the files after
cmTargetTraceDependencies, as that can add to target SOURCES. The
limitation is that the generated output name must not depend on the
SOURCES of a target if the generated file is used by that target.
Mark the output files as GENERATED so that trace dependencies does
not expect them to already exist in the filesystem.
Move the invokation of ForceLinkerLanguage in the Generate logic
to after the generated file names are known. ForceLinkerLanguage
tries to determine the sources of a target (in order to determine
an already-known language) and otherwise fails to get information
about the generated file.
Test that the output of file(GENERATE) can be used as a target source
file and that accessing the target SOURCES in the name of the output
file is an error. Accessing the TARGET_OBJECTS would be a similar
error if it was legal to use that generator expression in this
context. That is not currently possible and is a different error
condition, so test the current error output as a reminder to change
the expected output if that becomes possible in the future. Test
that generated rule files resulting from cmTargetTraceDependencies
appear in the SOURCES generated in the output file.
1531df2b configure_file: Warn about unknown arguments
4abbb140 Qt4: Fix configure_file call to use COPYONLY, not COPY_ONLY
bd7ba8e2 KWSys: Fix configure_file call to use COPYONLY, not COPY_ONLY
e9282782 Help: Fix configure_file call to use COPYONLY, not COPY_ONLY
Extend the RunCMake.configure_file test with a case covering possible
common typos of the COPYONLY option.
Reported-by: Iosif Neitzke <iosif.neitzke@gmail.com>
609037f4 ExternalProject: Add unit tests for CMAKE_CACHE_DEFAULT_ARGS
98cdb658 ExternalProject: Add CMAKE_CACHE_DEFAULT_ARGS arguments
36cf8a1e Tests/Tutorial: Fix when USE_MYMATH is OFF
d1b62185 Merge branch 'parent-scope-tests' into variable-pull-failure
5f414cef Revert "cmDefinitions: Don't store parent lookups"
e0c0b1ac test: add a test for PARENT_SCOPE with multiple scopes
064c415d test: add test for PARENT_SCOPE behavior
* parent-scope-tests:
test: add a test for PARENT_SCOPE with multiple scopes
test: add test for PARENT_SCOPE behavior
Conflicts:
Tests/RunCMake/set/RunCMakeTest.cmake
In the case of:
-DCACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG:BOOL=TRUE
the variable is parsed out as:
CACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG
because the parser allows '=' in the variable name. Disallow such a name
on the command line.
Given that you have a foobar that identifies itself as 1.2.3 from now on a
find_package(foobar 1.2 EXACT)
will succeed, as 1.2.3 will now be considered as being 1.2. Until now this was
only the case for version 1.2.0.
Unlike with Unix Makefiles generator modifying compiler paths was not
protected with Ninja generator. It was possible to modify them in the
cache without the expected effect on the generated solution. Also
activate corresponding tests with Ninja.
be6a555d Tests: Test setting a generator platform in a toolchain file
d506fee8 Tests: Use -A option to pass generator platform selection
11c9ddd6 ExternalProject: Use -A option to pass generator platform
29bd843e CTest: Use -A option to pass generator platform selection
eb7d8156 cmake: Add -A option to specify a generator platform
858d5a0b Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin
e177e7af FPHSA: Avoid if() dereferencing of quoted variable
425acc52 cmcurl: Use if(DEFINED) to simplify conditions
cede5cbd libarchive: Avoid depending on if() to dereference a quoted variable
2d97178b FindGTK2: Avoid depending on if() to dereference a quoted variable
0b12815d Modules/Test*.cmake: Use if(DEFINED) to simplify conditions
188a1f23 If: Introduce policy CMP0054 - don't dereference quoted variables in if()
b900c1cc If: Extract cmConditionEvaluator from if() implementation
Define the 'cmake -A' option to set CMAKE_GENERATOR_PLATFORM
without having to spell out the whole variable name. We choose
the name '-A' for "platform" because '-P' is already taken, and
in the common use case the "platform" is actually an architecture
(e.g. x64).
Teach the RunCMake test infrastructure to use -A to pass the generator
platform. Extend the RunCMake.GeneratorPlatform test with a case to
verify that the -A option cannot be repeated.
For VS generator names that do not specify the platform name, read
CMAKE_GENERATOR_PLATFORM to get it.
Extend the RunCMake.GeneratorPlatform test with a case covering
use of the x64 platform when the test generator is a Visual Studio
generator whose name does not specify a platform.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
The lexer changes in commit v3.0.0-rc1~495^2 (Add Lua-style long
brackets and long comments to CMake language, 2013-08-06) accidentally
left out matching '[' as a single character in an unquoted argument.
Add a lexer rule to match it and extend the RunCMake.Syntax test to
cover this case.
After calls to ProcessSourceItemCMP0049, check for an empty return
string to detect a failure instead of trusting GetErrorOccuredFlag.
The latter could have been left from a preceding non-fatal error.
Extend the RunCMake.Configure test to cover a case that exposed this
problem.
The generator name is "Xcode", not "XCode". Fix this typo. Explicitly
exclude the SubDirSpaces test on Xcode because it does not work. Also
tell the RunCMake.File_Generate test when Xcode is not multi-config so
it can exlcude the OutputConflict case.
Inspired-by: Daniele E. Domenichelli <daniele.domenichelli@iit.it>
Fix cmTarget::GetSourceFiles to set EvaluateForBuildsystem on the
$<TARGET_PROPERTY:...,INTERFACE_SOURCES> generator expression so that
the $<TARGET_OBJECTS> generator expression is allowed within an
INTERFACE_SOURCES value.
Extend the InterfaceLibrary test to cover this case. Extend the
RunCMake.TargetObjects test to cover failure of $<TARGET_OBJECTS>
when used through $<TARGET_PROPERTY:...,INTERFACE_SOURCES> in a
non-buildsystem context.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
Use the AddInterfaceEntries helper to avoid duplication. In
TargetPropertyEntry, replace the TargetName string member with a
reference to the full cmLinkImplItem that produced the entry. This is
possible because the cmLinkImplItem is available in AddInterfaceEntries
(it was not available in GetIncludeDirectories). Having the full
cmLinkImplItem allows processIncludeDirectories to implement CMP0027 OLD
behavior without repeating the target name lookup.
Update the RunCMake.CompatibleInterface test DebugProperties case
expected output for the new order of the messages.
Commit v2.8.11~156^2~2 (Expand includes and defines transitively
in 'external' genexes., 2013-02-13) introduced a recursive loop
and a stack overflow during evaluation of a link implementation
which depends on a transitive property, such as
add_library(empty1 ...)
add_library(empty2 ...)
target_link_libraries(empty1
PRIVATE
$<$<STREQUAL:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>,/foo/bar>:empty2>
)
There is no use-case for code like that currently, but it should not
cause a stack overflow.
Avoid the recursion by reporting an error early if a case like this
is found.
9998d78d Tests: Speed up RunCMake.include_directories test
6eee5d74 Tests: Drop broken and now unused RunCMake_TEST_FILE option
f0f15b93 Tests: Refactor RunCMake.include_directories to drop RunCMake_TEST_FILE
8707814e Tests: Refactor RunCMake.File_Generate to drop RunCMake_TEST_FILE
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Remove unnecessary language initializations. Change the main
CMakeLists.txt project() call to specify NONE. Use enable_language(CXX)
instead of project() in cases that need it to avoid enabling C too.
We cannot use -DRunCMake_TEST=${RunCMake_TEST_FILE} because test cases
use project(${RunCMake_TEST}) and the project name cannot be a path to a
file. The parent and grandparent commits removed the only uses of the
option. Drop it now.
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Create options "MESSAGE_ALWAYS", "MESSAGE_LAZY", and "MESSAGE_NEVER" to
specify whether to print the "Installing" and "Up-to-date" messages.
Extend the RunCMake.file test with cases covering these options.
Teach cmFileCopier::InstallDirectory to detect whether the destination
directory exists. If so, report it as "Up-to-date" instead of
"Installing". This resolves message asymmetry with file installations.
Extend the RunCMake.file and RunCMake.install tests to check the
installation output on both the first and second run.
Suggested-by: J Decker <d3ck0r@gmail.com>
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
ddec418a Features: Add compiler version support to WriteCompilerDetectionHeader.
b7029576 Project: Add configurable name for version computation macros.
78acaafe Project: Separate simulated compiler id from version detection.
567af1a5 WCDH: Issue a better message for version compatibility.
Xcode 1.5 does not support multiple configurations. The generator also
adds some sources internally that cause extra OriginDebug output.
Update the expected output to tolerate it.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
If we fail to create the generator named by CMAKE_GENERATOR, exit
with an error message instead of crashing. While at it, fix the
wording of the error message when CMAKE_GENERATOR is not set.
Extend the RunCMake.CommandLine test with cases covering the
"cmake --build" option when the named directory does not provide
a CMakeCache.txt with a valid CMAKE_GENERATOR.
Teach set_property and get_property an "INSTALL" property type to be
associated with install-tree file paths. Make the properties available
to CPack for use during packaging. Add a "prop_inst" Sphinx domain
object type for documentation of such properties.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
Add source file properties to control Xcode file type attributes:
XCODE_EXPLICIT_FILE_TYPE => explicitFileType
XCODE_LAST_KNOWN_FILE_TYPE => lastKnownFileType
Add a RunCMake.XcodeProject test to verify generated project content.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Provide a function to write a portable header to detect compiler
features. Generate a preprocessor #error for unknown compilers
and compiler versions whose features are not yet recorded. This
error condition might be relaxed in the future, but for now it
is useful for verification of expectations.
bc9a8bba Makefile: Undef FEATURE_STRING iteration define after use.
eb638c75 Tests: Make CompileFeatures feature list lang-specific.
e2f09aff CMakeConfigurableFile: Remove excess newline.
5109b042 Features: Fix GNU 4.8.1 version test.
6a9fdbeb Test: Parameterize the language in the CompileFeature test.
f5bf9d43 Tests: Make CompileFeature tests use highest standard known.
These policies should be checked at the call site that tries to access
the LOCATION or SOURCES property, not the directory scope containing the
target. Thread the caller context through cmTarget::GetProperty to use
for checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 and RunCMake.CMP0051 tests with
cross-directory cases.
This policy should be checked at the call site that tries to access the
LOCATION property, not the directory scope containing the target.
Thread the caller context through cmTarget::GetProperty to use for
checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 test with a cross-directory case.
Include tests for:
- @ expansion during normal execution
- various characters in variable names for comparison between the new
and the old parser
- corner cases in the parsers
- correct messages when behavior is different
205215fb cmTarget: Add CXX_STANDARD_REQUIRED to control decay.
1df2116b Features: Decay language flag if requested is not available.
c4f4dac2 Project: Fix exit-on-error with compile feature tests.
5bb7ce72 Project: Use nullary form of main for compile feature tests.
64254e7a Project: Remove extern from static string in feature tests.
0d9c99bf Help: Fix order of help entries.
dc7639bd Tests: Fix name of cache variable.
Brad King
Stephen Kelly
Gerald Combs
Nils Gladitz
Matt McCormick
Bill Hoffman
Domen Vrankar
Gregor Jasny
Raffi Enficiaud
Zack Galbreath
Justin Borodinsky
Ben Boeckel
Robert Maynard
Clinton Stimpson
Ruslan Baratov
Peter Collingbourne
Daniele E. Domenichelli
Rolf Eike Beer
Sylvain Joubert