Commit Graph

192 Commits

Author SHA1 Message Date
Stephen Kelly e48d84209c Cache context-independent includes on evaluation.
Generator expressions whose output depends on the configuration
now record that fact. The GetIncludeDirectories method can use
that result to cache the include directories for later calls.

GetIncludeDirectories is called multiple times for a target
for each configuration, so this should restore performance for
multi-config generators.
2013-02-03 23:04:03 +01:00
Stephen Kelly 089fe1c13d Optimize genex evaluation for includes and defines.
While porting boost to use these features, the generation step took
too long (several minutes before I stopped it). The reason was that
the boost libraries form a large interdependent mesh. The libraries
list their dependencies in their INTERFACE such as:

 $<LINKED:boost::core>;$<LINKED:boost::config>;$<LINKED:boost::mpl>

As boost::core already depends on the boost::config libraries, that
expression has no impact on the end-content, as it is removed after
the generation step. There is no DAG issue though, so the generator
expression evaluation would fully evaluate them. In the case of the
config library, it also depends on the core library, so all depends
are followed through that again, despite the fact that they've just
been evaluated. After this patch, the evaluation skips libraries if
they have already been seen via depends or directly in the content.

This patch keeps track of targets whose INTERFACE has been consumed
already. The INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS properties
are whitelisted because repeated content will be stripped out later
during generation. For other properties now and in the future, that
may not be the case.
2013-02-02 15:06:53 +01:00
Stephen Kelly 0b92602b81 Add the $<LINKED:...> generator expression.
This is both a short form of using a TARGET_DEFINED expression
together with a TARGET_PROPERTY definition, and a way to strip
non-target content from interface properties when exporting.
2013-01-31 17:34:20 +01:00
Stephen Kelly df4d2b28b2 Make it an error for INSTALL_PREFIX to be evaluated.
An empty string is not likely going to produce expected results
in any evaluation context. It is replaced by preprocessing
currently.
2013-01-31 17:27:06 +01:00
Stephen Kelly 30268b46f8 Handle reading empty properties defined by the link interface.
This was segfaulting before.
2013-01-31 11:18:49 +01:00
Stephen Kelly 34d1ade048 Add the INSTALL_PREFIX genex. 2013-01-27 09:59:26 +01:00
Stephen Kelly 2fb2c32f9b Add the COMPATIBLE_INTERFACE_STRING property. 2013-01-24 20:36:04 +01:00
Brad King a37b0e3ebf Merge topic 'qt4-autolink-qtmain'
e3b5eb6 Automatically link to the qtmain library when linking to QtCore.
6c8d8af Add the $<TARGET_POLICY> expression
2013-01-23 15:11:24 -05:00
Stephen Kelly e3b5eb6b23 Automatically link to the qtmain library when linking to QtCore.
When using QAxServer, ensure that the qtmain library is excluded
by reporting an error at CMake time if it is not.
2013-01-23 14:15:41 -05:00
Stephen Kelly e98799105b Make INTERFACE determined properties readable in generator expressions.
The properties are evaluated as link-dependent interface properties when
evaluating the generator expressions.
2013-01-20 17:06:47 +01:00
Stephen Kelly 6c8d8afe34 Add the $<TARGET_POLICY> expression
This new expression allows checking how a policy was set when a target
was created.  That information is only recorded for a subset of policies,
so a whitelist is used.
2013-01-17 17:20:17 +01:00
Stephen Kelly 2bee6f5ba5 Add the TARGET_DEFINED generator expression
This tests whether the parameter is a usable target.
2013-01-14 00:08:47 +01:00
Stephen Kelly bf5ece51c3 Keep track of properties used to determine linker libraries.
Those properties can't later be implicitly defined by the interface
of those link libraries.
2013-01-08 20:38:16 +01:00
Brad King db925e3532 Merge topic 'interface-includes-defines'
894f52f Handle INTERFACE properties transitively for includes and defines.
f5b1980 Populate the ExportedTargets member early in GenerateMainFile
c67b812 Make cycles in target properties ignored, not an error.
d0f950f Use mapped config properties to evaluate $<CONFIG>
26def17 Make all relevant targets available in the genex context.
0c657dc Add API to populate INTERFACE properties in exported targets.
e04f737 Add API to extract target names from a genex string.
b0c8f73 Add the TARGET_NAME generator expression.
77475fe Allow generator expressions to require literals.
b2f1700 GenEx: Add expressions to specify build- or install-only values
2013-01-07 14:20:13 -05:00
Stephen Kelly 894f52f32d Handle INTERFACE properties transitively for includes and defines.
Contextually, the behavior is as if the properties content from another
target is included in the string and then the result is evaluated.
2013-01-05 01:18:37 +01:00
Stephen Kelly c67b8124f7 Make cycles in target properties ignored, not an error.
Constructs such as these are an error as they are direct self-references:

 set_property(TARGET foo APPEND PROPERTY
   INCLUDE_DIRECTORIES $<TARGET_PROPERTY:foo,INCLUDE_DIRECTORIES>)
 set_property(TARGET foo APPEND PROPERTY
   INCLUDE_DIRECTORIES $<TARGET_PROPERTY:INCLUDE_DIRECTORIES>)

However, this is an indirect self-reference in a cycle, and not an error:

 set_property(TARGET foo APPEND PROPERTY
   INCLUDE_DIRECTORIES $<TARGET_PROPERTY:bar,INCLUDE_DIRECTORIES>)
 set_property(TARGET bar APPEND PROPERTY
   INCLUDE_DIRECTORIES $<TARGET_PROPERTY:foo,INCLUDE_DIRECTORIES>)
2013-01-05 01:18:36 +01:00
Stephen Kelly d0f950fdba Use mapped config properties to evaluate $<CONFIG> 2013-01-05 01:18:36 +01:00
Stephen Kelly 26def1771d Make all relevant targets available in the genex context.
The current node being evaluated transitively in the generator
expression must be available to resolve mapped configs.
2013-01-05 01:18:36 +01:00
Stephen Kelly b0c8f73eb6 Add the TARGET_NAME generator expression.
It will be used as a preprocessing marker.
2013-01-05 01:05:09 +01:00
Stephen Kelly 77475fe61d Allow generator expressions to require literals. 2013-01-05 01:05:09 +01:00
Stephen Kelly b2f1700bc7 GenEx: Add expressions to specify build- or install-only values
This is for specifying INCLUDE_DIRECTORIES relevant to the build-location
or the install location for example:

 set_property(TARGET foo PROPERTY
   INTERFACE_INCLUDE_DIRECTORIES
   "$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR};${CMAKE_CURRENT_SOURCE_DIR}>"
   "$<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include>"
 )

A 'bar' target can then use:

 set_property(TARGET bar PROPERTY
   INCLUDE_DIRECTORIES
   "$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>"
 )

and it will work whether foo is in the same project, or an imported target
from an installation location, or an imported target from a build location
generated by the export() command.

Because the generator expressions are only evaluated at build-time, these
new expressions are equivalent to the ZeroNode and OneNode.

The GeneratorExpression test is split into parts. Some shells can't run
the custom command as it is getting too long.
2013-01-05 01:05:08 +01:00
Stephen Kelly e767ffcda5 Don't crash when a target is expected but is not available. 2013-01-03 20:56:32 +01:00
Stephen Kelly 7d736af60e Replace some 'if' with 'else if'
For consistency with the rest of the method.
2012-12-23 16:37:01 +01:00
Brad King 5f30a56f29 Merge topic 'generator-expression-fixes'
b581be0 Genex: Don't segfault on $<FOO,>
07749e3 Genex: Ensure that $<0:...> has a parameter.
ee96dc7 Genex: Extract a method to parse parameters.
2012-11-27 13:35:02 -05:00
Stephen Kelly 07749e3705 Genex: Ensure that $<0:...> has a parameter. 2012-11-27 09:12:39 -05:00
Stephen Kelly ee96dc7686 Genex: Extract a method to parse parameters. 2012-11-26 22:52:22 +01:00
Stephen Kelly d8a59ea4b3 Port cmGeneratorExpression to cmTarget from cmGeneratorTarget.
Following from the discussion here:

 http://thread.gmane.org/gmane.comp.programming.tools.cmake.devel/3615/focus=5170
 (Re: Generator expressisons in target properties, 26 Oct 12:10)

we can't split cmTarget API for linking into cmGeneratorTarget. In
the future we will probably also need to move the include and compile
definitions API back to cmTarget so that it can be used by export().
2012-11-21 00:11:54 +01:00
Stephen Kelly 9be64f34c2 GenEx: Use case insensitive comparison for $<CONFIG:...>
This fixes a regression introduced by commit f1eacf0e
(cmGeneratorExpression: Re-write for multi-stage evaluation).
2012-11-05 08:49:25 -05:00
Stephen Kelly e386992152 GexEx: Validate Target names and property names differently.
In the unit test, use the same IMPORTED_LOCATION trick that
the ExportImport test uses.
2012-10-22 14:05:48 -04:00
Stephen Kelly a573a85658 Attempt to fix the compile of cmake on Sun CC.
The problem may be that the reportError method is static, so make
it non-static on that platform.
2012-10-11 22:31:35 +02:00
Stephen Kelly 7aa99270fa GenEx: Don't use std::vector::at(int).
It might not exist with GCC 2.9.
2012-10-09 08:26:56 -04:00
Stephen Kelly 354face4fa GenEx: Ensure that the empty CONFIGURATION can be used conditionally.
The CONFIGURATION can not be manipulated at unit testing time, so
this is not unit tested further.
2012-10-09 08:26:48 -04:00
Stephen Kelly 8b3b88abd8 GenEx: Validate target and property names.
They must be non-empty, and match a restrictive regexp.
2012-10-09 08:26:45 -04:00
Stephen Kelly a4985a9af9 GenEx: Report actual target name not found, not "0" each time. 2012-10-09 08:26:40 -04:00
Stephen Kelly d70650d6c3 GenEx: Return after error reported. 2012-10-09 08:26:37 -04:00
Brad King 103d99338a Merge topic 'generator-expression-target-properties'
083de7e Process generator expressions in the COMPILE_DEFINITIONS target property.
08cb4fa Process generator expressions in the INCLUDE_DIRECTORIES property.
0ef091d Early return if there is no target.
eb250cd Add a self-reference check for target properties.
7e80747 Add API to check that dependent target properties form a DAG.
239ac84 Add a generator expression for target properties.
e028381 Extend the generator expression language with more logic.
b8e61d6 Refactor GetCompileDefinitions a bit.
2c2b25b Return a std::string from GetCompileDefinitions.
b7e48e0 Add an AppendDefines std::string overload.
9a16087 Convert paths in INCLUDE_DIRECTORIES property to Unix slashes.
4557c8d Don't prepend a path before generator expressions in include_directories.
c6abc41 Add include guard for cmGeneratorExpression.
0ff4e3f Port remaining code to GetCompileDefinitions().
f178d53 Fix indentation in the code blocks generator.
2012-09-28 17:15:03 -04:00
Stephen Kelly eb250cd18a Add a self-reference check for target properties.
Prevent constructs like:

 ... INCLUDE_DIRECTORIES "$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>"

Indirect self-references (cycles) are also prevented here, but
indirect generator expression references of any kind are not
possible yet anyway.
2012-09-28 08:49:21 -04:00
Stephen Kelly 7e807472d2 Add API to check that dependent target properties form a DAG.
Initially this will only be used to check for self-references, but
can be extended to check for cycles when chaining properties of other
targets.
2012-09-28 08:49:21 -04:00
Stephen Kelly 239ac84153 Add a generator expression for target properties.
There are two overloads, so that it can use the operational
target when a target property is being evaluated, and a target
can alternatively be specified by name.

At this point, the generators don't chain. That comes later.
2012-09-28 08:49:21 -04:00
Stephen Kelly e028381bf1 Extend the generator expression language with more logic.
Generator expressions for comparing strings, evaluating
strings as booleans, and for creating literal right-angle-brackets
and commas are added. Those may be needed in some cases
where they appear in literals.
2012-09-28 08:49:21 -04:00
Stephen Kelly fb578c8635 Fix the regular expression validator for target names.
Regression introduced by f1eacf0e07.
Target names have different valid contents to config names.
2012-09-20 12:13:33 +02:00
Stephen Kelly f1eacf0e07 cmGeneratorExpression: Re-write for multi-stage evaluation
The expressions may be parsed and then cached and evaluated multiple
times.  They are evaluated lazily so that literals such as ',' can be
treated as universal parameter separators, and can be processed from
results without appearing literally, and without interfering with the
parsing/evaluation of the entire expression.
2012-09-18 17:02:23 -04:00