Define a "check_language(<lang>)" macro to test whether <lang> can be
enabled. Cache the result in CMAKE_<lang>_COMPILER. Add a test case
covering expected results.
If CXX or Fortran is enabled before C then the values of
CMAKE_SHARED_MODULE_C_FLAGS
CMAKE_SHARED_MODULE_CREATE_C_FLAGS
may not be available. On platforms where MODULE library (plugin) creation
is the same as SHARED library creation initialize the MODULE creation
flags from the SHARED creation flags of the matching language instead of
assuming that C has been enabled first.
Teach the COnly and CxxOnly tests to build MODULE libraries. The latter
covers this specific case.
Causes compiler modules (currently only GNU) to set a
CMAKE_DEPFILE_FLAGS_${lang} variable, which communicates to
the generator the flags required to cause the compiler to create
dependency files.
CHECK_INCLUDE_FILES("foo.h" HAVE_FOO_H) gave an output like:
Looking for include files HAVE_FOO_H
After this change it does now what CHECK_INCLUDE_FILE() also does:
Looking for include files foo.h
When using the NSIS generator from CPack the file NSIS.template.in is
used to generate a project.nsi file for NSIS to process. The file
consists code in the NSIS scripting language. Among other functions
there is an onInit function the initializes the installer. The function
(tries to) recognise admin and power users but fails since NSIS
scripting language relative includes the jump from the current command
so +3 means "run the third command after this one", so a failed check
for admin completely skips the check for a power user and goes directly
to "done:".
User permission lookup was added in initial NSIS support by commit
a11b9a4c (Merge from CPack branch, 2006-01-01). Later commit b1b052fd
(Several changes to for NSIS, 2006-03-01) added a line inside a block
that should be skipped by a jump without updating the jump length.
Update the jump length to correct the behavior.
If the debug and release libraries are the same (which usually means only one
of them was found) do not output the library as "optimized" and "debug", but
just as one plain library. At the end this means that the Find* output of the
avarage (Un*x) user will be much less cluttered.
RUBY_VERSION was always set, even if no RUBY_EXECUTABLE was found. While it
may make sense to assume a default version if we can't execute the binary, it
certainly doesn't make sense to report a version if there is no executable at
all.
98d2031 Fix BundleUtilities test failure with space in build path.
36d6641 Fix new BundleUtilities test failure on Mac 10.4.x
0d96dec GetPrerequisites: Add test for @rpath support.
880139a GetPrerequisites: Add support for @rpath on Mac OS X.
9a6b102 GetPrerequisites: Add support for @rpath on Mac OS X.
bb2b264 FindOpenSSL: also parse version number define with uppercase letters
7053a00 FindOpenSSL: only try to parse opensslv.h if it exists
44ba7a3 Merge branch 'master' of git://cmake.org/cmake into openssl-version
8e8672c FindOpenSSL: improve version number handling
- Enhance extract doc parser. Seems robust now. The legacy
module documentation parser works as before ignoring
the new markup.
- Proof of concept for CPack (generic), CPack RPM and CPack Deb
generator for macro and variables.
Try cpack --help-command and cpack --help-variables
The language is very simple. It use ##<keyword> special comment
which opens a structured documentation block and ##end closes it.
This may be used to extract documentation for macro as 'command'
and 'variables' such that cpack --help-command and --help-variable
does parse builtin modules files (CPack.cmake, CPackComponent.cmake,
...) in order to extract the corresponding doc.
QNX has the phtread stuff in the standard library. The best way would
IMHO be to check if a program that uses pthread_* can be successfully
linked without specifying any linker option before trying out the
different flags.
Change to consider a library embedded if it is found in a subdirectory relative to the
using executable/library. Previous commit considered them local.
This case is encountered when @rpath is used with framework libraries, which are inside a directory tree.
On dashmacmini2 the test showed output like this:
-- Found PythonInterp: /usr/bin/python (found version "Unknown option: --
usage: /usr/bin/python [option] ... [-c cmd | file | -] [arg] ...
Try `python -h' for more information.")
On my machine where python outputs "Python 2.7" this worked, but
PYTHON_VERSION_MAJOR, PYTHON_VERSION_MINOR, and PYTHON_VERSION_PATCH were all
set to "2.7".
Add some checks that the version output has the expected form before using it.
This allows the developer to tell FindPythonInterp which Python version should
be searched for. This allows the right version to be chosen for a project
without user assistance if there are specific requirements. This is especially
useful as it is common to have major versions 2 and 3 installed in parallel,
which are partly incompatible.
6856b4d Merge topic 'link-shared-depend-cycle-issue-12647' into check_symbol_exists
8e1f376 add a test for Check{,CXX}SymbolExists
813eca6 CheckSymbolExists: force the compiler to keep the referenced symbol
0df1942 Detect SGI MIPSpro compiler version with its id
a5e892c Document compiler version macro formats used for detection
d7c6f41 Detect HP compiler version with its id
3dd9fa9 Detect SunPro compiler version with its id
c198730 Detect Watcom compiler version with its id
5899b98 Detect Clang compiler version with its id
b8cfa65 Detect PGI compiler version with its id
6dae666 Detect IBM XL compiler version with its id
4080d55 Detect Borland compiler version with its id
2cc205a Detect Intel compiler version with its id (#11937)
a6d83cc Detect MSVC compiler version with its id
a662855 Detect GNU compiler version with its id (#6251)
fa7141f Add framework to detect compiler version with its id (#12408)
Otherwise the compiler may optimize out the reference to the symbol as the
previous version was not really using this. This leads to symbols that are
only in a header but not in the given libraries to be reported as present.
This came up on the first try to fix bug 11333 as "gcc -O3" would optimize
out the reference to pthread_create() so the correct library the symbol is in
was not detected.
The new test code was suggested by Brad King.
When we have no MPI compiler wrapper and search explicitly for the MPI
C++ library append it correctly to the list of libraries instead of
using a space.
Suggested-by: Mourad Boufarguine <bouffa@gmail.com>
This fix bug #12863 whose symptom was a lot of "warning: File listed twice"
printed out by rpmbuild when processing the spec file.
Signed-off-by: Eric NOULARD <eric.noulard@gmail.com>
First this fixes the bug that e.g. version "1.0.0" was shown as "1..". When
pkg-config was used to find OpenSSL the header file was parsed for the version
number even if pkg-config returned it already. Finally we also include the
patch level (i.e. the letter after the version number) in OPENSSL_VERSION.
When GIT_EXECUTABLE points at ".../Git/cmd/git.cmd" in an msysGit
installation we previously failed to detect the version number in a
subtle case. The "git.cmd" assumes 'chcp' is in PATH. It is typically
available at "C:\Windows\System32\chcp.com". On 64-bit Windows the File
System Redirector maps this location to "C:\Windows\SysWOW64\chcp.com"
for 32-bit processes. However, some Windows installations fail to
provide chcp.com at this path. Whenever git.cmd runs in a 32-bit
command shell, as it does under a 32-bit CMake binary, it reports
'chcp' is not recognized as an internal or external command,
operable program or batch file.
on stderr. Capture stderr separately so it does not affect parsing
of the version number.
See also msysGit issue 358:
http://code.google.com/p/msysgit/issues/detail?id=358
Note that FindGit prefers "git.cmd" over "git.exe" because it sets up
the proper HOME environment variable necessary for Git ssh connections
to work the same as they do from the Git bash prompt.
Decode decimal digits from _SGI_COMPILER_VERSION or _COMPILER_VERSION to
compute version number components. See documentation at:
http://predef.sourceforge.net/precomp.html
The MSVC, HP, XL, SunPro, Watcom, Borland, and Intel compilers specify
their version number in components encoded in a single integer value.
Document the components that we use to compute version numbers.
Decode hex digits from __SUNPRO_C and __SUNPRO_CC to compute the version
number components. Note that the constant encodes decimal digits as hex
digits (never larger than 9). We represent them as decimal after
extraction. See documentation at
http://predef.sourceforge.net/precomp.html
Although the documented version number format is
0xVRP where V = Version, R = Revision, P = Patch
it holds only though SunPro C/C++ version 5.9. Later versions have
a two-digit revision (minor) number so their format is 0xVRRP.
When cmake searches for Python libs in Windows it searches in:
[HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
However, the information might not always reside there. The information
could also reside in:
[HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
when one installs Python for a single user and not for all users.
Fix typo introduced in commit 66a08c10 (more uniform approach to enable
language, 2004-08-26). The optimization option should be /O2 for
Release configurations and /O1 for MinSizeRel.
Suggested-by: He Yuqi <yuqi.he@gmail.com>
This addresses Bug 11882 which provided a sample implementation for adding
support for cusparse. I went ahead and added all the libraries I thought
appropriate.
Added support for additional import paths during protoc invocation
time to the PROTOBUF_GENERATE_CPP public macro via a new
PROTOBUF_IMPORT_DIRS optional variable.
Patch courtesy of Miroslav Kes <mkes@ra.rockwell.com>
The default OS X 10.4 linker incorrectly searches for dependencies of
linked shared libraries only under the -isysroot location. It fails to
find dependencies of linked shared libraries in cases such as the
ExportImport test. It produces errors like:
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library:
libtestLib3Imp.dylib
referenced from: /.../ExportImport/Root/lib/libtestLib3lib.1.2.dylib
(checking for undefined symbols may be affected) (No such file or directory, errno = 2)
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols: _testLib3Imp
referenced from libtestLib3lib expected to be defined in
libtestLib3Imp.dylib
or with CMAKE_SKIP_RPATH off to enable install_name in the Export side:
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library:
/Developer/SDKs/MacOSX10.4u.sdk/.../ExportImport/Export/impl/libtestLib3Imp.dylib
referenced from: /.../ExportImport/Export/libtestLib3lib.1.2.dylib
(checking for undefined symbols may be affected) (No such file or directory, errno = 2)
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols:_testLib3Imp
referenced from libtestLib3lib expected to be defined in
/.../ExportImport/Export/impl/libtestLib3Imp.dylib
Note how "/Developer/SDKs/MacOSX10.4u.sdk" is prepended to the dependent
library path.
Commit 2cff26fa (Support linking to shared libs with dependent libs,
2008-01-31) and commit 82fcaebe (Pass dependent library search path to
linker on some platforms, 2008-02-01) worked around the problem by
defining platform variable CMAKE_LINK_DEPENDENT_LIBRARY_FILES. It tells
CMake to link to dependent libraries explicitly by their path thus
telling the linker where to find them.
Unfortunately the workaround had the side effect of linking dependent
libraries and defeats most benefits of LINK_INTERFACE_LIBRARIES.
Fortunately OS X 10.5 and above do not need to find transitive
dependencies at all so we can avoid the workaround on Modern OS X.
Previously we linked C, Fortran, and ASM shared libraries compiled with
the HP compiler using a direct invocation of the linker (ld). This
behavior was left historically from support for an ancient HP C compiler
that did not know how to create shared libraries. Fortran shared
libraries need to be linked with the compiler to get the language
runtime library dependencies as is already done for C++.
Update the HP-UX-HP* platform information to use the compiler front end
when linking shared libraries. This works on modern HP tools and
produces correct behavior. If there is a need to support older tools
again we can add a special case for them.
...if it matches "windres", as opposed to being exactly equal to "windres"
Cross-compiling windres compilers are named something like
"i686-w64-mingw32-windres" (for example)
automoc now defaults to strict mode, also with Qt4, i.e. it behaves as
the documentation says by default. I also inverted the switch
CMAKE_AUTOMOC_STRICT_MODE to CMAKE_AUTOMOC_RELAXED_MODE.
Docs and test adapted accordingly.
Alex
The User may now specific a list of file that shouldn't be
automatically handled by CPack but specified by the user.
Like %config(noreplace) or specific %attr.
The concerned files/dir lines will be removed from the set
automatically handled by CPack.
The mingw32-make tool does not handle parenthesis in the path to a
source file consistently. When CMake is installed in a typical location
like "c:\Program Files (x86)\CMake 2.8\" the mingw32-make tool fails on
the FortranCInterface detection project sometimes with errors like
>mingw32-make -f CMakeFiles\myfort.dir\build.make CMakeFiles/myfort.dir/my_module.f90.obj
mingw32-make: *** No rule to make target `x86)/CMake 2.8/share/cmake-2.8/Modules/FortranCInterface/my_module.f90)',
needed by `CMakeFiles/myfort.dir/my_module.f90.obj'. Stop.
due to parens in the path to the FortranCInterface source directory.
However, the behavior varies with the file name of build.make:
>copy CMakeFiles\myfort.dir\build.make CMakeFiles\myfort.dir\build2.make
>mingw32-make -f CMakeFiles\myfort.dir\build2.make CMakeFiles/myfort.dir/my_module.f90.obj
[ 3%] Building Fortran object CMakeFiles/myfort.dir/my_module.f90.obj
Tested with
>mingw32-make -v
GNU Make 3.82
Built for i386-pc-mingw32
Work around the problem by copying the whole FortranCInterface source
directory in to the project build tree.
2d11951 Merge branch 'master' into AutomocIncludedDotMocFileHandling
1eca18f automoc: add documentation for CMAKE_AUTOMOC_STRICT_MODE
bc278ce automoc: fix line length
62e223e automoc: add variable CMAKE_AUTOMOC_STRICT_MODE, to enable strict parsing
40c5167 automoc: accept even more .moc files in non-strict mode
c207f5d automoc: also accept other files when .moc is included in non-strict mode
9c0df72 automoc: add a StrictParseCppFile(), which is only qmake-compatible
174bf35 automoc: move the code for finding headers into separate function
8507eae automoc: fix handling of included _p.moc files
7ada172 automoc: some more linebreaks for the warnings for better readability
3b93e26 automoc: add extra check whether the header contains Q_PRIVATE_SLOT
4745715 Add a test case for the use of Q_PRIVATE_SLOT.
bde4edb automoc: add special handling for including basename_p.moc, with test
74ab0f6 automoc: move some code from the big parsing loop into separate functions
bc7560e automoc: add test for including a moc_abc_p.cpp file
30fd8e6 automoc: add test for including the moc file from another header
...
Teach CMakePlatformId.h to construct an "INFO:compiler_version[]" string
literal from macros COMPILER_VERSION_(MAJOR|MINOR|PATCH|TWEAK) to be
defined in CMake(C|CXX)CompilerId.(c|cpp) for each compiler. Provide
conversion macros DEC() and HEX() to decode decimal or hex digits from
integer values. Parse the version out of the compiler id binary along
with the other INFO values already present.
Store the result in variable CMAKE_<LANG>_COMPILER_VERSION in the format
"major[.minor[.patch[.tweak]]]". Save the value persistently in
CMake(C|CXX)Compiler.cmake in the build tree. Document the variable for
internal use since we do not set it everywhere yet.
Report the compiler version on the compiler id result line e.g.
The C compiler identification is GNU 4.5.2
Report CMAKE_(C|CXX)_COMPILER_(ID|VERSION) in SystemInformation test.
ae62a1c Test CMAKE_GNUtoMS option in ExportImport on MinGW and MSys
afb00fe Add CMAKE_GNUtoMS option to convert GNU .dll.a to MS .lib
61e8629 Factor makefile generator link rule lookup into helper function
a603250 Load platform files that need to know the ABI when possible
ecd8414 Fortran: Detect pointer size in gfortran on MinGW
0efe602 TinyCC: Add default compilation flags (#12605)
ec636e2 TinyCC: Add compiler info for shared libs on Linux (#12605)
1f49d72 Recognize the Tiny C Compiler (#12605)
This allows you to have more than source file with the same name but different
directories. The intermediate and configuration files are now in this same directory.
Nvcc can emit '/path' instead of '//path' which can cause a lot of grief later. We test
to see if the file exists, if it doesn't then we see if the file exists with '/'
prepended. Files that don't exist won't be added to the list.
Fix a long outstanding bug when a file in the dependency list wasn't found. This bug
wouldn't reset the dependencies, so the makefile would still want the missing file when
building. The work around was to configure twice, but this is no longer necessary.
Teach the Windows-GNU.cmake platform file to look for Visual Studio
tools matching the target ABI. Add an extra step to the link command
for shared libraries and executables that export symbols and on which a
new GNUtoMS property is set (initialized by the CMAKE_GNUtoMS option).
Tell the GNU linker to output a module definition (.def) file listing
exported symbols in addition to the GNU-format import library (.dll.a).
Pass the .def file to the MS "lib" tool to construct a MS-format DLL
import library (.lib).
Teach the install(TARGETS) command to install the MS import library next
to the GNU one. Teach the install(EXPORT) and export() command to set
the IMPORTED_IMPLIB property pointing at the import library to use the
import library matching the tools in the importing project.
Load platform files named in CMAKE_<lang>_ABI_FILES for each language
once the ABI sizeof(void*) is known. During the first configuration
this is after the test for working compiler and ABI detection checks.
During later configurations the ABI information is immediately available
because it has been saved in CMake<lang>Compiler.cmake.
Use __SIZEOF_POINTER__ which the GNU Fortran compiler defines at least
on 64-bit MinGW. Assume default size 4 on MinGW if gfortran does not
define the size.
Adding VERBATIM to the ADD_CUSTOM_COMMAND calls in the qt4 macros
ensures that paths are properly quoted when passed to the shell.
This fixes issues when building projects that contained paths with
special characters (according to /bin/sh), such as parentheses or
spaces.
Use the "-shared" option to link shared libraries. The compiler does
not support "-Wl," or "-rpath" but does know how to pass "-soname"
through to the linker.
Perform multiple separate searches in order. If ZLIB_ROOT is set search
it exclusively so it takes precedence over CMAKE_PREFIX_PATH. This
allows a user to provide -DZLIB_ROOT=/path/to/zlib/prefix on the CMake
command line to tell it exactly where to find zlib. Otherwise fall back
to a normal search.
Inspired-by: Andreas Schneider <asn@cryptomilk.org>
982b766 Eclipse: use new variable CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT
1110e45 Eclipse: create links to subprojects also in the source-project (#12579)
65dde30 FindGettext: two more fixes for files with multiple dots
e48fcff -make GETTEXT_PROCESS_PO_FILES() work with files with multiple dots
ecb4459 Strip trailing whitespace
Handle @rpath much like other Unixes, by doing a find_file with the given directories.
Also, consider a library to be local if it is found in the same directory or a subdirectory relative to the user
executable/library. Previously, it was local only if found in the same directory.
This case is encountered when @rpath is used with framework libraries, which are inside a directory tree.
Previously ECLIPSE_CDT4_GENERATE_SOURCE_PROJECT was used, but the
new name CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT is more in line with
the general naming conventions in cmake, and, more importantly IMO,
in cmake-gui it now appears right next to the other eclipse-related
variables, which all start with CMAKE_ECLIPSE_.
A warning is printed if the old variable is TRUE and the new one isn't,
so users should notice that they have to enable the new one.
Alex
537020f Tests: Nudge MFC test to pass on VS 6 dashboards (#11213)
51f442e VS11: Update InstallRequiredSystemLibraries.cmake for VS11 (#11213)
d85ab7a Tests: Add environment logging to the MFC test (#11213)
011694c VS10: Use expected values for UseOfMfc (#11213)
a2e6d24 Tests: Fix MFC test to work with VS 10 and later (#11213)
Patch by Albert Astals Cid.
E.g. plasma_package_org.kde.activityswitcher.po will now be installed
correctly as plasma_package_org.kde.activityswitcher.mo, and not as
plasma_package_org.mo.
This is kind-of related to #12282
Alex
I've just found out that use of FindBISON.cmake shipped with CMake 2.8
on system where bison++ is default bison executable (e.g. Debian Linux)
will result in corrupted CMakeCache.txt file and parse error due to
"Offending entry"
As FindBISON.cmake logic used to obtain installed bison executable
version is tailored to match only the message used in GNU Bison it fails
on absolutely different Bison++ version message and whole version
message including \n characters is stored into BISON_VERSION which is
then dumped into CMakeCache.txt, so everything after first \n character
makes "Offending entry".
467ee36 Check plugin variables are defined before warning.
4571ea6 Don't resolve directories; are never relative.
9cfc920 Match fixup_qt4_executable with documentation.
This commit adds a new target property AUTOMOC_MOC_OPTIONS, which
can be set to add extra options for the moc invocations done via automoc.
This is equivalent to the OPTIONS parameter in the qt4_wrap_cpp() macro.
Alex
66bd543 Eclipse: fix#12417, don't create wrong src pathentries
70de8bd Eclipse: detect number of CPUs, set CMAKE_ECLIPSE_MAKE_ARGUMENTS accordigly
117f2b8 Eclipse: add Build and Clean targets to targets
c3f30bd Eclipse: move code for generating links to targets into separate function
cef6bd9 Eclipse: move code for generating links to projects into separate function
b6d4de7 Eclipse: add virtual folder for each target
COVERAGE_EXTRA_FLAGS is a space separated value of extra flags
that will be passed to gcov when ctest's coverage handler invokes
gcov to do coverage analysis.
Map to CoverageExtraFlags in the CTest ini file. Use default value
of "-l" to match the coverage handler's earlier behavior from ctest
2.8.4 and earlier. The fix for related issue #11717 had added a " -p"
which was the cause of both #12415 and #12490. Here, we revert that
change to the default value, so -p is no longer there by default.
The people that care to add -p may do so in their own build trees
by appending " -p" to the new cache variable COVERAGE_EXTRA_FLAGS.
dcd2459 Eclipse: better message when Eclipse version could not be determined
b4b2fc3 Eclipse: don't create VirtualFolders if not supported
5b200e3 Detect whether the current Eclipse version supports VirtualFolders
4974ec9 Eclipse generator: detect Eclipse version
Clinton Stimpson
Rolf Eike Beer
Brad King
David Cole
Peter Collingbourne
Mattias Helsing
Philip Lowman
Eric NOULARD
Yury G. Kudryashov
Deborah Pickett
Christian Andersson
Alex Neundorf
Michael Wild
Jason Erb
James Bigler
Mike McQuaid
Tim Gallagher
Alexey Ozeritsky
Mathieu Malaterre
Pierre-Francois Laquerre
Stephen Kelly
Ondrej Balaz
Mateusz Loskot
Dan Kegel
Nicolas Despres